[Bug 97325] Re: IDE disks not found

2008-02-25 Thread Anders
*** This bug is a duplicate of bug 106931 ***
https://bugs.launchpad.net/bugs/106931

** This bug has been marked a duplicate of bug 106931
   Unable to detect ITE8212 RAID0 array

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2008-01-17 Thread Anders
Leann/All, to avoid confusing the issue I have raised a new bug and
included the information I believe you require:

Please check out Bug #182949 , IDE disks not found by linux 2.6.24 (but
are working fine in gutsy)

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2008-01-15 Thread Leann Ogasawara
Hi Anders,

Can you attach your dmesg output for the newer kernel?  Thanks.

** Changed in: linux (Ubuntu)
   Status: New = Incomplete

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2008-01-15 Thread Leann Ogasawara
A task against the actively developed kernel has been opened so we are
closing the task against linux-source-2.6.20.  Thanks!

** Changed in: linux-source-2.6.20 (Ubuntu)
   Status: Confirmed = Won't Fix

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2008-01-11 Thread Anders
I just upgraded to Hardy Heron (Linux kernel 2.6.24) and the same
problem is replicated: system boots but fsck complains about certain
disks referenced in /etc/fstab (by uuid) are missing: spesifically the 2
disks on the IT8212 IDE controller (that were also disappearing when I
reported this bug earlier).

Fsck dies with exit status 9.


** Also affects: linux-source-2.6.24 (Ubuntu)
   Importance: Undecided
   Status: New

** Changed in: linux (Ubuntu)
Sourcepackagename: linux-source-2.6.24 = linux
 Assignee: (unassigned) = Ubuntu Kernel Team (ubuntu-kernel-team)

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-29 Thread Id2ndR
I fix the problem of my comment of 2007-04-13. This is 
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/106864/comments/13
I now can use this computer.

One my older computer (my comment of 2007-04-19), where no older kernle
is install, I can't boot the liveCD because I can't load piix as my usb
keyboard is not detected before busybox appears. But I don't require to
use Ubuntu on this computer, it's just a test.


So if other people can fix trouble by loading piix (see link before), this bug 
is a duplicate of #106864 one.

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-24 Thread Anders
I found the solution for my problem, at least: somewhere in the
incremental changes in the 2.6.20.* kernels, the method of determining
uuid must have changed: my fstab contained an *almost* identical fstab
to what the latest kernels identified the disk as (see screenshot of
Gnome disk properties and fstab extract

I changed the fstab with the new uuid and the reboot worked fine!

** Attachment added: uuid discrepancy
   http://librarian.launchpad.net/7398890/uuid-discrepancy.png

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-19 Thread Id2ndR
Hi,

I think this bug is *major* whereas its importance is currently set to low.
In fact I downloaded and burn iso image of feisty. I just tried it one an older 
computer with IDE only CdRom and HDD and it doesn't start at all : I can see a 
busybok because kinit is not able to mount cdrom (root file system) !

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-16 Thread Olaf Leidinger
(Maybe) same problem here.

On linux-image = 2.6.20.14 my IDE disk is recognized as SCSI/SATA disk
and therefore the device isn't hda? but sda?.

The IDE interface is : Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
(rev 04) (prog-if 8a [Master SecP PriP])

Ciao,
Olaf

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-16 Thread Olaf Leidinger
Oh, I'm sorry... seems to be fixed for me with the latest version of
2.6.20.15.

Ciao,
Olaf

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-13 Thread Id2ndR
I've got an computer which only support IDE hdd (no SATA). Linux kernel 2.6.17 
works with it but, upgrading to feisty this morning, 2.6.20-14 doesn't.
The output show that linux detects 2 ata controler but recognise only cdrom 
devices attached to the second one. I tried to connect hdd to the second ata 
port but it doesn't work better.

Linux image 2.6.20-2 with is on a old daily live cd seems to recognize
hdd but I can download the packet anymore on archive.ubuntu.com.

I copy bellow output of dmesg and lspci -vvn :with old kernel image :


[17179569.184000] Linux version 2.6.17-11-generic ([EMAIL PROTECTED]) (gcc 
version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Tue Mar 13 
23:32:38 UTC 2007 (Ubuntu 2.6.17-11.37-generic)
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820:  - 0009fc00 (usable)
[17179569.184000]  BIOS-e820: 0009fc00 - 000a (reserved)
[17179569.184000]  BIOS-e820: 000d2000 - 000d8006 (reserved)
[17179569.184000]  BIOS-e820: 000f - 0010 (reserved)
[17179569.184000]  BIOS-e820: 0010 - 2fff (usable)
[17179569.184000]  BIOS-e820: 2fff - 2fff8000 (ACPI data)
[17179569.184000]  BIOS-e820: 2fff8000 - 3000 (ACPI NVS)
[17179569.184000]  BIOS-e820: fec0 - fec01000 (reserved)
[17179569.184000]  BIOS-e820: fed0 - fed01000 (reserved)
[17179569.184000]  BIOS-e820: fee0 - fee01000 (reserved)
[17179569.184000]  BIOS-e820: fff0 - 0001 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 767MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 196592
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   Normal zone: 192496 pages, LIFO batch:31
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 AMI   ) @ 
0x000fa6e0
[17179569.184000] ACPI: RSDT (v001 HP-BDD HPBDD-JH 0x0010 MSFT 0x0097) 
@ 0x2fff
[17179569.184000] ACPI: FADT (v001 HP-BDD HPBDD-JH 0x0011 MSFT 0x0097) 
@ 0x2fff0030
[17179569.184000] ACPI: MADT (v001 HP-BDD HPBDD-JH 0x0001 MSFT 0x0097) 
@ 0x2fff00c0
[17179569.184000] ACPI: DSDT (v001 HP-BDD HPBDD-JH 0x0001 MSFT 0x010d) 
@ 0x
[17179569.184000] ACPI: PM-Timer IO Port: 0x808
[17179569.184000] ACPI: Local APIC address 0xfee0
[17179569.184000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[17179569.184000] Processor #0 15:2 APIC version 20
[17179569.184000] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0])
[17179569.184000] IOAPIC[0]: apic_id 2, version 32, address 0xfec0, GSI 0-23
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[17179569.184000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[17179569.184000] ACPI: IRQ0 used by override.
[17179569.184000] ACPI: IRQ2 used by override.
[17179569.184000] ACPI: IRQ9 used by override.
[17179569.184000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[17179569.184000] Using ACPI (MADT) for SMP configuration information
[17179569.184000] Allocating PCI resources starting at 4000 (gap: 
3000:cec0)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: 
root=UUID=b2968f82-9f11-4135-9a54-2d197822e5b4 ro quiet splash
[17179569.184000] mapped APIC to d000 (fee0)
[17179569.184000] mapped IOAPIC to c000 (fec0)
[17179569.184000] Enabling fast FPU save and restore... done.
[17179569.184000] Enabling unmasked SIMD FPU exception support... done.
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[17179569.184000] Detected 2400.089 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179571.328000] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
[17179571.328000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[17179571.352000] Memory: 766944k/786368k available (1911k kernel code, 18824k 
reserved, 1073k data, 308k init, 0k highmem)
[17179571.352000] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.
[17179571.432000] Calibrating delay using timer specific routine.. 4804.74 
BogoMIPS (lpj=9609492)
[17179571.432000] Security Framework v1.0.0 initialized
[17179571.432000] SELinux:  Disabled at boot.
[17179571.432000] Mount-cache hash table entries: 512
[17179571.432000] CPU: After generic identify, caps: 3febfbff   
   
[17179571.432000] CPU: After vendor identify, caps: 3febfbff   
   
[17179571.432000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[17179571.432000] CPU: L2 cache: 512K
[17179571.432000] CPU: Hyper-Threading is disabled
[17179571.432000] CPU: After all inits, caps: 

[Bug 97325] Re: IDE disks not found

2007-04-13 Thread Anders
Interesting (possible indicative?) lines in dmesg related to it821x:


[   85.605560] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[   85.605563] apm: disabled - APM is not SMP safe.
[   85.973492] it821x: can't process command 0xE5
[   85.973514] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   85.973521] ata1.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   85.973522]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   85.979772] ata1.00: configured for PIO
[   85.979779] ata1: EH complete
[   85.979806] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[   85.979816] sda: Write Protect is off
[   85.979819] sda: Mode Sense: 00 3a 00 00
[   85.979835] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   85.980694] it821x: can't process command 0x98
[   85.980710] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   85.980715] ata1.00: cmd 98/01:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   85.980716]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   85.987812] ata1.00: configured for PIO
[   85.987818] ata1: EH complete
[   85.988467] it821x: can't process command 0xB0
[   85.988488] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   85.988493] ata1.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   85.988495]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   85.995914] ata1.00: configured for PIO
[   85.995921] ata1: EH complete
[   85.995932] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[   85.995942] sda: Write Protect is off
[   85.995944] sda: Mode Sense: 00 3a 00 00
[   85.995958] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   85.995973] SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
[   85.995981] sda: Write Protect is off
[   85.995983] sda: Mode Sense: 00 3a 00 00
[   85.995996] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   86.021418] it821x: can't process command 0xE5
[   86.021440] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   86.021445] ata2.00: cmd e5/00:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   86.021447]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   86.027846] ata2.00: configured for PIO
[   86.027853] ata2: EH complete
[   86.035625] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   86.039603] sdb: Write Protect is off
[   86.039605] sdb: Mode Sense: 00 3a 00 00
[   86.047594] SCSI device sdb: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   86.114796] it821x: can't process command 0x98
[   86.114813] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   86.114818] ata2.00: cmd 98/01:00:00:00:00/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   86.114819]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   86.119772] ata2.00: configured for PIO
[   86.119778] ata2: EH complete
[   86.120002] it821x: can't process command 0xB0
[   86.120022] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[   86.120027] ata2.00: cmd b0/d8:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 
data 0 
[   86.120028]  res 50/00:01:01:00:00/00:00:00:00:00/00 Emask 0x80 
(invalid argument)
[   86.127738] ata2.00: configured for PIO
[   86.127745] ata2: EH complete
[   86.131333] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   86.131429] sdb: Write Protect is off
[   86.131432] sdb: Mode Sense: 00 3a 00 00
[   86.131458] SCSI device sdb: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   86.131484] SCSI device sdb: 625142448 512-byte hdwr sectors (320073 MB)
[   86.131496] sdb: Write Protect is off
[   86.131498] sdb: Mode Sense: 00 3a 00 00
[   86.131531] SCSI device sdb: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.264874] Bluetooth: Core ver 2.11


** Attachment added: /var/log/dmesg
   http://librarian.launchpad.net/7321376/dmesg

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
[EMAIL PROTECTED]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-12 Thread Anders
Reshuffled the IDE cables on the IT8212 card: 1 disk per cable (no
longer master/slave). PC boots up on 2.6.20-14, one disk is still
undetected.

dmesg attached.

[EMAIL PROTECTED]:~$ lspci -vvn
00:00.0 0600: 8086:29a0 (rev 02)
Subsystem: 1458:5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort+ SERR- PERR-
Latency: 0
Capabilities: access denied

00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 6000-6fff
Memory behind bridge: f400-f6ff
Prefetchable memory behind bridge: e000-efff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- Reset- FastB2B-
Capabilities: access denied

00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d000 [size=32]

00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at c000 [size=32]

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: access denied

00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 1458:a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa10 (64-bit, non-prefetchable) [size=16K]
Capabilities: access denied

00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 5000-5fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-
Capabilities: access denied

00:1c.3 0604: 8086:2845 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 7000-8fff
Memory behind bridge: fa00-fa0f
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-
Capabilities: access denied

00:1c.4 0604: 8086:2847 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 9000-9fff
Memory behind bridge: f700-f8ff
Prefetchable memory behind bridge: 8000-800f
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-
  

[Bug 97325] Re: IDE disks not found

2007-04-12 Thread Anders
Here is the output from booting the live CD image from 10 April (
http://cdimage.ubuntu.com/daily-live/20070410/ )

dmesg attached, lspci -vvn below:


[EMAIL PROTECTED]:~$ lspci -vvn
00:00.0 0600: 8086:29a0 (rev 02)
Subsystem: 1458:5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort+ SERR- PERR-
Latency: 0
Capabilities: access denied

00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 6000-6fff
Memory behind bridge: f400-f6ff
Prefetchable memory behind bridge: e000-efff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- Reset- FastB2B-
Capabilities: access denied

00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at d000 [size=32]

00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
Subsystem: 1458:5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin B routed to IRQ 18
Region 4: I/O ports at c000 [size=32]

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
Subsystem: 1458:5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- 
TAbort- MAbort- SERR- PERR-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: Memory at fa105000 (32-bit, non-prefetchable) [size=1K]
Capabilities: access denied

00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 1458:a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fa10 (64-bit, non-prefetchable) [size=16K]
Capabilities: access denied

00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 5000-5fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-
Capabilities: access denied

00:1c.3 0604: 8086:2845 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 7000-8fff
Memory behind bridge: fa00-fa0f
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-
Capabilities: access denied

00:1c.4 0604: 8086:2847 (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 9000-9fff
Memory behind bridge: f700-f8ff
Prefetchable memory behind bridge: 8000-800f
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast TAbort- TAbort- 
MAbort- SERR- PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- Reset- FastB2B-

[Bug 97325] Re: IDE disks not found

2007-04-10 Thread Anders
I upgraded the kernel to 2.6.20-14.* and can confirm that this was a
REGRESSION over 2.6.20-13:

On 2.6.20-13, I do get the fsck failure at boot, but continuing the boot
without fsck'ing works: one of my 2 IDE disks gets automounted (it
contains my /home, so fairly essential), the other is shown in the side
panel of the GNOME file manager as 297 Gb Hard drive and I can mount
it to /media/disk by doubleclicking on it and entering my password. This
is - needless to say - a hassle but acceptable: the disk is working but
is not mounted to where I want it and where I have spesified it in
fstab (I want it as /media/shared-files )

On 2.6.20-14 neither IDE disk is recognized at boot, causing the fsck
failure at boot and when the login manager comes up, it gives me a
warning that /home/{username} is not available and suggests I rectify
it.

The two IDE disks are connected as master/slave on one of two ports on a
PCI IDE controller card. As they work in 2.6.20-13 (with a bit of
fiddling for the second disk) I assume the problem is not with this
controller?

I assume this is a regerssion in 2.6.20-14 over 2.6.20-13? Please let me
know any additional info I can submit to help fix this issue?

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-04-10 Thread Tim Gardner
Can you just boot from a recent Live CD with a 2.6.20-14 kernel and
attach the output of dmesg and 'lspci -vvn'. Lets make the kernel can at
least correctly detect your disk drive configuration.

-- 
IDE disks not found
https://bugs.launchpad.net/bugs/97325
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-30 Thread Anders

** Attachment added: GNOME allows mount of 'lost' disk. (Screenshot)
   http://librarian.launchpad.net/7056283/snapshot8.png

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-30 Thread Anders
As we have seen from ls /dev/disk/by-uuid/ -alh the disk is there. GNOME
also finds is and allows GUI-based mounting of the disk. Any clues here
why the boot fails so spectacularly?

** Attachment added: gnome finds the disk (screenshot)
   http://librarian.launchpad.net/7056270/snapshot7.png

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-30 Thread Tim Gardner
This problem has to do with the JMicron controller on your motherboard.
Get the daily ISO on Monday Apr 2 from http://cdimage.ubuntu.com/daily-
live/current which will contain lib-ata fixes, boot from the CD and make
sure all of your drives appear. If so, then we'll proceed from there.

** Changed in: linux-source-2.6.20 (Ubuntu)
   Importance: Undecided = Low
 Assignee: Tim Gardner = Ubuntu Kernel Team

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders
I tried to reconnect my IDE hard drives to a separate IDE / RAID PCI
controller card to no avail; system still behaving bizarrely

Attached is the rather bizarre sight when booting: apt-get is not
installed, you can install it by typing apt-get install apt-get ??!!

** Attachment added: screenshot (JPEG format)
   http://librarian.launchpad.net/7049577/G%3A%5CDCIM%5C329CANON%5CIMG_2926.JPG

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders

** Attachment added: fstab screen 2
   http://librarian.launchpad.net/7049636/G%3A%5CDCIM%5C329CANON%5CIMG_2928.JPG

** Changed in: linux-source-2.6.20 (Ubuntu)
   Status: Needs Info = Confirmed

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders
/etc/fstab attached as requested

** Attachment added: fstab screen 1
   http://librarian.launchpad.net/7049622/G%3A%5CDCIM%5C329CANON%5CIMG_2929.JPG

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders
Found some workarounds / indicators in the forums and got the PC up by
doing Ctrl+D:

http://ubuntuforums.org/showthread.php?t=388705highlight=drive-by-uuid

attaching fstab files for further assistance


** Attachment added: /etc/fstab
   http://librarian.launchpad.net/7050787/fstab

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders

** Attachment added: /var/log/dmesg
   http://librarian.launchpad.net/7050837/dmesg

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders

** Attachment added: Output of ls /dev/disk/by-uuid/ -alh
   http://librarian.launchpad.net/7050802/snapshot6.png

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-29 Thread Anders
appears fsck can't find one of the partitions (but it's there, according
to the screenshot above?)

fsck.ext3: Unable to resolve 'UUID=d4f96ce8-db6f-4cb3-b8b0-d91993e44225'


** Attachment added: /var/log/fsck/checkfs
   http://librarian.launchpad.net/7050823/checkfs

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-28 Thread Anders
I should add that this is something that has happened between 2.6.20-6
and 2.6.20-13, as I had a fully functional system running Feisty beta
until Bug #84964 came about

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-28 Thread sam tygier
can you attach your /etc/fstab

** Changed in: linux-source-2.6.20 (Ubuntu)
   Status: Unconfirmed = Needs Info

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs


[Bug 97325] Re: IDE disks not found

2007-03-28 Thread Tim Gardner
Keep a watch on #97179 as I think it is closely related, if not a
duplicate. Same motherboard, slightly different symptoms.


** Changed in: linux-source-2.6.20 (Ubuntu)
 Assignee: (unassigned) = Tim Gardner

-- 
IDE disks not found
https://launchpad.net/bugs/97325

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs