[Bug 1101187] Re: in case ow two networks on the same bridge nova overwrites dnsmasq config
Hi, nova-network was designed for relatively simple networking use cases, so it struggles to support things like this. However, for what you're trying to achieve the neutron project should work very well! Check out the networking guide at : http://docs.openstack.org/networking-guide/ and see about moving to neutron for this. Given that this bug is a few years old now, I think it's time to close it with our apologies. ** Changed in: nova Status: Confirmed => Won't Fix ** Changed in: nova (Ubuntu) Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/1101187 Title: in case ow two networks on the same bridge nova overwrites dnsmasq config To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/1101187/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1489059] Re: "db type could not be determined" running py34
** Also affects: cinder Importance: Undecided Status: New ** Changed in: cinder Assignee: (unassigned) => Tom Barron (tpb) ** Changed in: cinder Status: New => In Progress -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to python-ironicclient in Ubuntu. https://bugs.launchpad.net/bugs/1489059 Title: "db type could not be determined" running py34 To manage notifications about this bug go to: https://bugs.launchpad.net/aodh/+bug/1489059/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1551299] Re: Unable to run LXC commands on xenial guest in trusty host with --share-net 1
Shouldn't be using "--share-net 1". Need to "lxc-start -n $container- name -d" and then "lxc-attach -n $container-name -- cmd". Needed lxc from trusty-backports too. ** Changed in: lxc (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1551299 Title: Unable to run LXC commands on xenial guest in trusty host with --share-net 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1551299/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1551299] Re: Unable to run LXC commands on xenial guest in trusty host with --share-net 1
** Attachment added: "apport.lxc.qo3lud5p.apport" https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1551299/+attachment/4584512/+files/apport.lxc.qo3lud5p.apport -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1551299 Title: Unable to run LXC commands on xenial guest in trusty host with --share-net 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1551299/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1551304] [NEW] Unable to run LXC commands on xenial guest in trusty host with --share-net 1
*** This bug is a duplicate of bug 1551299 *** https://bugs.launchpad.net/bugs/1551299 Public bug reported: This is a duplicate of 1551299 ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: lxc 1.0.8-0ubuntu0.3 ProcVersionSignature: Ubuntu 3.13.0-79.123-generic 3.13.11-ckt33 Uname: Linux 3.13.0-79-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.19 Architecture: amd64 Date: Mon Feb 29 15:51:10 2016 Ec2AMI: ami-0142 Ec2AMIManifest: FIXME Ec2AvailabilityZone: prodstack-zone-1 Ec2InstanceType: cpu1-ram2-disk50 Ec2Kernel: aki-0002 Ec2Ramdisk: ari-0002 KernLog: ProcEnviron: TERM=screen PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: lxc UpgradeStatus: No upgrade log present (probably fresh install) defaults.conf: lxc.network.type = veth lxc.network.link = lxcbr0 lxc.network.flags = up lxc.network.hwaddr = 00:16:3e:xx:xx:xx ** Affects: lxc (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug ec2-images trusty ** This bug has been marked a duplicate of bug 1551299 Unable to run LXC commands on xenial guest in trusty host with --share-net 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1551304 Title: Unable to run LXC commands on xenial guest in trusty host with --share-net 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1551304/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1551299] [NEW] Unable to run LXC commands on xenial guest in trusty host with --share-net 1
Public bug reported: I've created a xenial LXC on a trusty host as follows: http://paste.ubuntu.com/15244552/ I'm able to run commands inside the LXC without "--share-net 1" but any time I try with "--share-net 1" it fails, such as: http://paste.ubuntu.com/15243604/ (strace output). Will attach apport report. ** Affects: lxc (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1551299 Title: Unable to run LXC commands on xenial guest in trusty host with --share-net 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1551299/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1536297] Re: unable to lxc-start unprivileged LXC on wily due to permissions error
Thanks, that seems to work. I guess it was just an expectation issue - didn't realise I'd have to fix things up manually to get unprivileged containers to work. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1536297 Title: unable to lxc-start unprivileged LXC on wily due to permissions error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1536297/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1536297] [NEW] unable to lxc-start unprivileged LXC on wily due to permissions error
Public bug reported: I've followed https://help.ubuntu.com/lts/serverguide/lxc.html#lxc- basic-usage but am getting a failure on lxc-start as follows: lxc-start -n container-test2 -F lxc-start: start.c: print_top_failing_dir: 102 Permission denied - could not access /home/mthaddon. Please grant it 'x' access, or add an ACL for the container root. lxc-start: sync.c: __sync_wait: 51 invalid sequence number 1. expected 2 lxc-start: start.c: __lxc_start: 1213 failed to spawn 'container-test2' lxc-start: lxc_start.c: main: 344 The container failed to start. lxc-start: lxc_start.c: main: 348 Additional information can be obtained by setting the --logfile and --logpriority options. Is this because my home directory is encrypted? Which user is it trying to connect as? Here are my permissions on /home: $ ls -lh /home/ total 212K drwx-- 113 mthaddon mthaddon 204K Jan 20 17:41 mthaddon drwxr-xr-x 2 safechain nogroup 4.0K Jul 31 2014 safechain ProblemType: Bug DistroRelease: Ubuntu 15.10 Package: lxc 1.1.5-0ubuntu0.15.10.3 Uname: Linux 4.2.0-040200rc3-generic i686 ApportVersion: 2.19.1-0ubuntu5 Architecture: i386 CurrentDesktop: Unity Date: Wed Jan 20 17:34:58 2016 EcryptfsInUse: Yes InstallationDate: Installed on 2011-10-04 (1569 days ago) InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Beta i386 (20110921.2) SourcePackage: lxc UpgradeStatus: Upgraded to wily on 2015-11-19 (62 days ago) defaults.conf: lxc.network.type = veth lxc.network.link = lxcbr0 lxc.network.flags = up lxc.network.hwaddr = 00:16:3e:xx:xx:xx ** Affects: lxc (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 wily -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to lxc in Ubuntu. https://bugs.launchpad.net/bugs/1536297 Title: unable to lxc-start unprivileged LXC on wily due to permissions error To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/lxc/+bug/1536297/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384503] Re: rsync fails on large files with compression
Hi Andrew, Installing that version (rsync_3.1.1-3 from the Vivid repo in this case - no dependency problems) on the machine initiating (which is also the target) the rsync didn't fix it. However, installing it on the source machine as well seems to have fixed the problem. Regards, Tom -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1384503 Title: rsync fails on large files with compression To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/1384503/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384503] Re: rsync fails on large files with compression
I can confirm I still get this error on Ubuntu 14.04 (all up to date) rsync: Both machines: 3.1.0-2ubuntu0.1 File is a .sql.gz file, 1.5 GB in size, as above, --skip-compress=gz doesn't help: . dbdump.sql.gz 0 0%0.00kB/s0:00:00 inflate returned -3 (0 bytes) rsync error: error in rsync protocol data stream (code 12) at token.c(557) [receiver=3.1.0] rsync: connection unexpectedly closed (4092364 bytes received so far) [generator] rsync error: error in rsync protocol data stream (code 12) at io.c(226) [generator=3.1.0] -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to the bug report. https://bugs.launchpad.net/bugs/1384503 Title: rsync fails on large files with compression To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/rsync/+bug/1384503/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1523656] Re: Missing my-default.cnf Failing mysql_install_db
Hi, We're using mysql-server 5.6 on Ubuntu Server 14.04.01. The package version is 5.6.27-0ubuntu0.14.04.1. I saw that this bug was fixed in release 5.6.23 but this bug also appears with 5.6.27 : -- $ mysql_install_db --datadir=/home/mysql/data --basedir=/usr --keep-my-cnf FATAL ERROR: Could not find my-default.cnf If you compiled from source, you need to run 'make install' to copy the software into the correct location ready for operation. If you are using a binary release, you must either be at the top level of the extracted archive, or pass the --basedir option pointing to that location. -- Indeed a my-defaut.cnf file exists in the package at /usr/share/doc/mysql-server-5.6/examples/my-default.cnf which is not parsed by the find_in_basedir function of mysql_install_db perl script : my $cfg_template= find_in_basedir($opt,"file","my-default.$cnfext", ".", "share","share/mysql","support-files"); This file is supposed to exist in /usr/share/mysql which is not in mysql-server-5.6 package release 5.6.27-0ubuntu0.14.04.1 Regards, Tom. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-5.6 in Ubuntu. https://bugs.launchpad.net/bugs/1523656 Title: Missing my-default.cnf Failing mysql_install_db To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mysql-5.6/+bug/1523656/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1514731] Re: OpenStack Installation Guide for Ubuntu in Installation Guide Executable not found: conntrack (filter match = conntrack)
Hi Rushikesh, This doesn't appear to belong in this tracker, which is about problems in documentation, so I've tagged it up with Ubuntu's neutron package for you. ** Also affects: ubuntu Importance: Undecided Status: New ** No longer affects: ubuntu ** Also affects: neutron (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1514731 Title: OpenStack Installation Guide for Ubuntu in Installation Guide Executable not found: conntrack (filter match = conntrack) To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1514731/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
Still no updated package in the cloud archive -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
Still no updated package in the cloud archive -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
2015-10-12 23:43:41.881 1092 INFO neutron.plugins.ml2.drivers.linuxbridge.agent.linuxbridge_neutron_agent [req-404c3fdf-1abf-4d55-afe3-be56bfe38939 - - - - -] LinuxBridge Agent RPC Daemon Started! 2015-10-12 23:43:41.888 1092 INFO oslo.messaging._drivers.impl_rabbit [-] Connecting to AMQP server on controller:5672 2015-10-12 23:43:41.899 1092 INFO oslo.messaging._drivers.impl_rabbit [-] Connected to AMQP server on controller:5672 2015-10-12 23:43:41.970 1092 ERROR neutron.agent.linux.utils [req-404c3fdf-1abf-4d55-afe3-be56bfe38939 - - - - -] Command: ['sudo', '/usr/bin/neutron-rootwrap', '/etc/neutron/rootwrap.conf', 'ebtables', '-L'] Exit code: 99 Stdin: Stdout: Stderr: /usr/bin/neutron-rootwrap: Unauthorized command: ebtables -L (no filter matched) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
root@compute1:~# apt-cache showpkg neutron-plugin-linuxbridge-agent Package: neutron-plugin-linuxbridge-agent Versions: 2:7.0.0~rc1-0ubuntu2~cloud0 (/var/lib/apt/lists/ubuntu-cloud.archive.canonical.com_ubuntu_dists_trusty-updates_liberty_main_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: 954a060c661df8e8272f394f152b1457 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: 954a060c661df8e8272f394f152b1457 1:2014.1.5-0ubuntu1 (/var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty-updates_main_binary-amd64_Packages) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: 954a060c661df8e8272f394f152b1457 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: 954a060c661df8e8272f394f152b1457 1:2014.1.3-0ubuntu1.1 (/var/lib/apt/lists/security.ubuntu.com_ubuntu_dists_trusty-security_main_binary-amd64_Packages) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: 954a060c661df8e8272f394f152b1457 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: 954a060c661df8e8272f394f152b1457 1:2014.1-0ubuntu1 (/var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: 954a060c661df8e8272f394f152b1457 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: 954a060c661df8e8272f394f152b1457 Reverse Depends: Dependencies: 2:7.0.0~rc1-0ubuntu2~cloud0 - bridge-utils (0 (null)) neutron-plugin-ml2 (5 2:7.0.0~rc1-0ubuntu2~cloud0) init-system-helpers (2 1.13~) sysv-rc (18 2.88dsf-24) file-rc (2 0.8.16) python:any (2 2.6~) python (0 (null)) quantum-plugin-linuxbirdge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbirdge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) 1:2014.1.5-0ubuntu1 - bridge-utils (0 (null)) neutron-plugin-linuxbridge (5 1:2014.1.5-0ubuntu1) sysv-rc (18 2.88dsf-24) file-rc (2 0.8.16) python:any (0 (null)) quantum-plugin-linuxbirdge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbirdge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) 1:2014.1.3-0ubuntu1.1 - bridge-utils (0 (null)) neutron-plugin-linuxbridge (5 1:2014.1.3-0ubuntu1.1) sysv-rc (18 2.88dsf-24) file-rc (2 0.8.16) python:any (0 (null)) quantum-plugin-linuxbirdge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbirdge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) 1:2014.1-0ubuntu1 - bridge-utils (0 (null)) neutron-plugin-linuxbridge (5 1:2014.1-0ubuntu1) sysv-rc (18 2.88dsf-24) file-rc (2 0.8.16) python:any (0 (null)) quantum-plugin-linuxbirdge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbirdge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent (3 1:2013.2~b2-0ubuntu1~) quantum-plugin-linuxbridge-agent:i386 (3 1:2013.2~b2-0ubuntu1~) Provides: 2:7.0.0~rc1-0ubuntu2~cloud0 - 1:2014.1.5-0ubuntu1 - 1:2014.1.3-0ubuntu1.1 - 1:2014.1-0ubuntu1 - Reverse Provides: -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
This still isn't fixed using the latest from the cloud archive today. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502362] Re: Linux bridge agent should use agent config file in Liberty
Still not fixed in the rc1 packages in cloud-archive -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502362 Title: Linux bridge agent should use agent config file in Liberty To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502362/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
Command: ['sudo', '/usr/bin/neutron-rootwrap', '/etc/neutron/rootwrap.conf', 'ebtables', '-L'] Exit code: 99 Stdin: Stdout: Stderr: /usr/bin/neutron-rootwrap: Unauthorized command: ebtables -L (no filter matched) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
This is still not fixed in the rc1 packages in cloud-archive. ** Changed in: neutron (Ubuntu) Status: Fix Committed => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1502363] Re: Linux bridge agent should include ebtables package and rootwrap rule
Reverse Depends: neutron-server,neutron-plugin-ml2 neutron-plugin-openvswitch-agent,neutron-plugin-ml2 2:7.0.0~rc1-0ubuntu2~cloud0 neutron-plugin-openvswitch,neutron-plugin-ml2 neutron-plugin-linuxbridge-agent,neutron-plugin-ml2 2:7.0.0~rc1-0ubuntu2~cloud0 neutron-plugin-linuxbridge,neutron-plugin-ml2 neutron-plugin-openflow-agent,neutron-plugin-ml2 1:2014.1.3-0ubuntu1.1 neutron-server,neutron-plugin-ml2 neutron-plugin-openvswitch-agent,neutron-plugin-ml2 1:2014.1.3-0ubuntu1.1 neutron-plugin-openflow-agent,neutron-plugin-ml2 1:2014.1.5-0ubuntu1 neutron-server,neutron-plugin-ml2 neutron-plugin-openvswitch-agent,neutron-plugin-ml2 1:2014.1.5-0ubuntu1 neutron-plugin-openflow-agent,neutron-plugin-ml2 1:2014.1-0ubuntu1 neutron-server,neutron-plugin-ml2 neutron-plugin-openvswitch-agent,neutron-plugin-ml2 1:2014.1-0ubuntu1 Dependencies: 2:7.0.0~rc1-0ubuntu2~cloud0 - neutron-common (5 2:7.0.0~rc1-0ubuntu2~cloud0) 1:2014.1.5-0ubuntu1 - neutron-common (5 1:2014.1.5-0ubuntu1) 1:2014.1.3-0ubuntu1.1 - neutron-common (5 1:2014.1.3-0ubuntu1.1) 1:2014.1-0ubuntu1 - neutron-common (5 1:2014.1-0ubuntu1) Provides: 2:7.0.0~rc1-0ubuntu2~cloud0 - neutron-plugin 1:2014.1.5-0ubuntu1 - neutron-plugin 1:2014.1.3-0ubuntu1.1 - neutron-plugin 1:2014.1-0ubuntu1 - neutron-plugin Reverse Provides: -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1502363 Title: Linux bridge agent should include ebtables package and rootwrap rule To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/neutron/+bug/1502363/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1453160] Re: [SRU] missing binaries in Ubuntu heat packages
** No longer affects: openstack-manuals -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to heat in Ubuntu. https://bugs.launchpad.net/bugs/1453160 Title: [SRU] missing binaries in Ubuntu heat packages To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1453160/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1457957] [NEW] puppet uses upstart for service status checks in vivid
Public bug reported: After upgrading one of my servers to 15.04/vivid (from original 14.10/utopic install), I had a failing puppet job. The error message is: Error: /Stage[main]/Main/Service[ssh]: Could not evaluate: Execution of '/sbin/status ssh' returned 1: status: Unable to connect to Upstart: Failed to connect to socket /com/ubuntu/upstart: Connection refused After some research it seems that this happens with all daemons that have an upstart config file hanging around in '/etc/init/'. Puppet checks for existence of that file, and then assumes that it should issue the '/sbin/status ' command in order to check the service status. For all services that don't have an upstart conf installed, puppet uses '/etc/init.d/ status', which works perfectly (for ssh and munin-node, the two services I used while verifying the behavior). As I assume that we cannot expect to have all services drop the upstart config in their vivid packages (I'm not sure about the status of upstart support in vivid), the best fix should be to have puppet check for '/etc/init.d/' before trying '/etc/init//.conf', at least on vivid. puppet-common version: 3.7.2-1ubuntu2 Note: even setting service 'hasstatus => no' and 'status => /etc/init.d/ssh status' in the puppet Service definition does not force puppet to not issue the command (which probably should be a separate bug). ** Affects: puppet (Ubuntu) Importance: Undecided Status: New ** Tags: vivid ** Attachment added: "Test puppet recipe that fails when executed on vivid using: 'puppet apply test.pp'" https://bugs.launchpad.net/bugs/1457957/+attachment/4402503/+files/test.pp ** Tags added: verification-done ** Tags removed: verification-done ** Tags added: vivid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to puppet in Ubuntu. https://bugs.launchpad.net/bugs/1457957 Title: puppet uses upstart for service status checks in vivid To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/puppet/+bug/1457957/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1096791] Re: failed to install/upgrade: "check_password_restrictions: the password does not meet the complexity criteria!"
samba (2:4.1.13+dfsg-4ubuntu3) installed on Ubuntu 15.04 http://babyish.wikia.com/wiki/Samba4?oldid=43243 ** Also affects: samba (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/1096791 Title: failed to install/upgrade: "check_password_restrictions: the password does not meet the complexity criteria!" To manage notifications about this bug go to: https://bugs.launchpad.net/samba/+bug/1096791/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1178625] Re: xendomains can't stop any domU with xl toolstack
Tom Hendrikx' patch applies cleanly to an up-to-date 14.04 and appears to fix the bugs with "xl" for me too. Thanks Tom. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to xen in Ubuntu. https://bugs.launchpad.net/bugs/1178625 Title: xendomains can't stop any domU with xl toolstack To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xen/+bug/1178625/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1407018] Re: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno
*** This bug is a duplicate of bug 1389914 *** https://bugs.launchpad.net/bugs/1389914 ** This bug has been marked a duplicate of bug 1389914 python-trove uninstallable on trusty w/ juno cloud-archive -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1407018 Title: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openstack-trove/+bug/1407018/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1407018] Re: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno
** No longer affects: openstack-manuals -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1407018 Title: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openstack-trove/+bug/1407018/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1407018] Re: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno
** Also affects: openstack-trove (Ubuntu) Importance: Undecided Status: New ** Changed in: openstack-trove (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1407018 Title: Install the Database service in OpenStack Installation Guide for Ubuntu 14.04 - juno To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1407018/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1400960] Re: Problems with a snappy tour
I suspect the problem is SIGWINCH. I can reproduce this problem if I
resize or maximize the terminal window while snappy installs docker.
However once things fail they seem to continue to fail no matter what.
> ssh -p 8022 ubuntu@localhost
ubuntu@localhost's password:
Welcome to Ubuntu Vivid Vervet (development branch) (GNU/Linux
3.16.0-25-generic x86_64)
* Documentation: https://help.ubuntu.com/
Welcome to the Ubuntu Core rolling development release.
* See https://ubuntu.com/snappy
It's a brave new world here in snappy Ubuntu Core! This machine
does not use apt-get or deb packages. Please see 'snappy --help'
for app installation and transactional updates.
Last login: Thu Dec 11 01:11:05 2014 from 10.0.2.2
ubuntu@localhost:~$ sudo snappy uninstall docker
ubuntu@localhost:~$ sudo snappy install docker
Traceback (most recent call last): ]
File "/usr/bin/click", line 86, in
sys.exit(main())
File "/usr/bin/click", line 82, in main
return mod.run(args)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 105, in
run
t = download_click(details["anon_download_url"], progress_class)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 48, in
download_click
acq.fetch(package_uri, package_path)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 264, in fetch
self._run_acquire_method(uri, destfile)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 235, in
_run_acquire_method
for number, raw_message in _read_messages(p.stdout, self.TIMEOUT):
File "/usr/lib/python3/dist-packages/click/acquire.py", line 84, in
_read_messages
rl, wl, xl = select.select([infd], [], [], timeout)
InterruptedError: [Errno 4] Interrupted system call
ubuntu@localhost:~$ sudo snappy install docker
docker 4 MB [=
Traceback (most recent call last):
File "/usr/bin/click", line 86, in
sys.exit(main())
File "/usr/bin/click", line 82, in main
return mod.run(args)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 105, in
run
t = download_click(details["anon_download_url"], progress_class)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 48, in
download_click
acq.fetch(package_uri, package_path)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 264, in fetch
self._run_acquire_method(uri, destfile)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 235, in
_run_acquire_method
for number, raw_message in _read_messages(p.stdout, self.TIMEOUT):
File "/usr/lib/python3/dist-packages/click/acquire.py", line 84, in
_read_messages
rl, wl, xl = select.select([infd], [], [], timeout)
InterruptedError: [Errno 4] Interrupted system call
ubuntu@localhost:~$ Traceback (most recent call last):
File "/usr/lib/x86_64-linux-gnu/click/acquire/https", line 30, in
m.run()
File "/usr/lib/python3/dist-packages/click/acquire.py", line 295, in run
self.fetch(message.get("URI"), message.get("FileName"))
File "/usr/lib/python3/dist-packages/click/acquire.py", line 385, in fetch
self.uri_done(uri, destfile)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 321, in uri_done
""").format(uri=uri, filename=filename, size=os.path.getsize(filename),
File "/usr/lib/python3.4/genericpath.py", line 50, in getsize
return os.stat(filename).st_size
FileNotFoundError: [Errno 2] No such file or directory: '/tmp/tmpf96bhatg'
Traceback (most recent call last):
File "/usr/lib/x86_64-linux-gnu/click/acquire/https", line 30, in
m.run()
File "/usr/lib/python3/dist-packages/click/acquire.py", line 295, in run
self.fetch(message.get("URI"), message.get("FileName"))
File "/usr/lib/python3/dist-packages/click/acquire.py", line 385, in fetch
self.uri_done(uri, destfile)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 321, in uri_done
""").format(uri=uri, filename=filename, size=os.path.getsize(filename),
File "/usr/lib/python3.4/genericpath.py", line 50, in getsize
return os.stat(filename).st_size
FileNotFoundError: [Errno 2] No such file or directory: '/tmp/tmpaqcsfh1c'
ubuntu@localhost:~$ sudo cat /var/log/system-image/client.log
[systemimage] Dec 11 01:11:24 2014 (790) SystemImage dbus main loop starting
[ubuntu-core/devel/generic_amd64]
[systemimage] Dec 11 01:11:24 2014 (790) Mediator created
[systemimage] Dec 11 01:11:32 2014 (790) test and acquire checking lock
[systemimage] Dec 11 01:11:32 2014 (790) checking lock acquired
[systemimage] Dec 11 01:11:32 2014 (790) Mediator recreated
[systemimage] Dec 11 01:11:32 2014 (790) Enter _check_for_update()
[systemimage] Dec 11 01:11:32 2014 (790) No valid image master key found,
downloading
[systemimage] Dec 11 01:11:35 2014 (790) Looking for blacklist:
htt
[Bug 1400960] [NEW] Problems with a snappy tour
Public bug reported:
[This was also sent to snappy-de...@lists.ubuntu.com.]
Hi,
I followed the steps in the "Launch Snappy locally with KVM on Linux"
section on http://www.ubuntu.com/cloud/tools/snappy. Then I ran the
steps in the "A snappy tour of Ubuntu Core!" section on
http://www.ubuntu.com/cloud/tools/snappy. Sorry, I don't see a way to
link directly to these sections. I ran into a few problems. Please see
below.
kvm is running just fine, no errors.
This is on a 64-bit version of 14.10. I am running with LUKS encrypted
root partition and an ecryptfs encrypted home directory, if that's
relevant.
Thanks.
-Tom
> ssh -p 8022 ubuntu@localhost
The authenticity of host '[localhost]:8022 ([127.0.0.1]:8022)' can't be
established.
ECDSA key fingerprint is 78:88:86:be:e4:4b:6f:73:3d:b0:1b:5a:1c:ce:1b:dc.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '[localhost]:8022' (ECDSA) to the list of known
hosts.
ubuntu@localhost's password:
Welcome to Ubuntu Vivid Vervet (development branch) (GNU/Linux
3.16.0-25-generic x86_64)
* Documentation: https://help.ubuntu.com/
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
Welcome to the Ubuntu Core rolling development release.
* See https://ubuntu.com/snappy
It's a brave new world here in snappy Ubuntu Core! This machine
does not use apt-get or deb packages. Please see 'snappy --help'
for app installation and transactional updates.
To run a command as administrator (user "root"), use "sudo ".
See "man sudo_root" for details.
ubuntu@localhost:~$ snappy info
release: ubuntu-core/devel
frameworks:
apps:
ubuntu@localhost:~$ snappy versions
Part Tag Installed Available Fingerprint Active
ubuntu-core edge 140141184ad1e863e947 *
ubuntu@localhost:~$ sudo snappy install docker
docker 4 MB [===]OK
Traceback (most recent call last):
File "/usr/bin/snappy", line 9, in
status = Main().__main__()
File "/usr/lib/python3/dist-packages/snappy/main.py", line 159, in __main__
return callback(args)
File "/usr/lib/python3/dist-packages/snappy/main.py", line 380, in _do_install
self._do_versions(args)
File "/usr/lib/python3/dist-packages/snappy/main.py", line 262, in
_do_versions
parts = (SystemImageDataSource().versions(all) +
File "/usr/lib/python3/dist-packages/snappy/systemimage.py", line 158, in
versions
info = self._iface.Information()
File "/usr/lib/python3/dist-packages/dbus/proxies.py", line 145, in __call__
**keywords)
File "/usr/lib/python3/dist-packages/dbus/connection.py", line 651, in
call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not
receive a reply. Possible causes include: the remote application did not send a
reply, the message bus security policy blocked the reply, the reply timeout
expired, or the network connection was broken.
ubuntu@localhost:~$ sudo snappy install docker
Traceback (most recent call
last):=
]
File "/usr/bin/click", line 86, in
sys.exit(main())
File "/usr/bin/click", line 82, in main
return mod.run(args)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 105, in
run
t = download_click(details["anon_download_url"], progress_class)
File "/usr/lib/python3/dist-packages/click/commands/install.py", line 48, in
download_click
acq.fetch(package_uri, package_path)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 264, in fetch
self._run_acquire_method(uri, destfile)
File "/usr/lib/python3/dist-packages/click/acquire.py", line 235, in
_run_acquire_method
for number, raw_message in _read_messages(p.stdout, self.TIMEOUT):
File "/usr/lib/python3/dist-packages/click/acquire.py", line 84, in
_read_messages
rl, wl, xl = select.select([infd], [], [], timeout)
InterruptedError: [Errno 4] Interrupted system call
ubuntu@localhost:~$ Traceback (most recent call last):
File "/usr/lib/x86_64-linux-gnu/click/acquire/https", line 30, in
m.run()
File "/usr/lib/python3/dist-packages/click/acquire.py", line 295, in run
self.fetch(message.get("URI"), message.get("FileName"))
File "/usr/lib/python3/dist-packages/click/acquire.py", line 385, in fetch
[Bug 1376459] Re: 1.5.4+bzr2294-0ubuntu1.1 maas-dhcp package update stops external dhcpd
Just experienced the same issue with 1.5.4+bzr2294-0ubuntu1.2 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to maas in Ubuntu. https://bugs.launchpad.net/bugs/1376459 Title: 1.5.4+bzr2294-0ubuntu1.1 maas-dhcp package update stops external dhcpd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/maas/+bug/1376459/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 832507] Re: console.log grows indefinitely
** Tags added: ops -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/832507 Title: console.log grows indefinitely To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/832507/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1308543] Re: /etc/trove/*.conf need creating
** No longer affects: openstack-manuals -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1308543 Title: /etc/trove/*.conf need creating To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openstack-trove/+bug/1308543/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1308523] Re: trove-conductor needs packaging
** Changed in: openstack-manuals Status: Confirmed => Fix Released ** Changed in: openstack-manuals Assignee: (unassigned) => Tom Fifield (fifieldt) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1308523 Title: trove-conductor needs packaging To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1308523/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 807091] Re: "internal error character device (null) is not using a PTY" when using virsh console
I'm seeing this on trusty/icehouse: root@furud:~# virsh list --all IdName State 32instance-2bb1 running 37instance-2bb2 running 4237 instance-6b86 running 4238 instance-6b87 running root@furud:~# virsh console instance-6b87 Connected to domain instance-6b87 Escape character is ^] error: internal error: character device is not using a PTY ** Changed in: nova (Ubuntu) Status: Fix Released => New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/807091 Title: "internal error character device (null) is not using a PTY" when using virsh console To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nova/+bug/807091/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: SQL error during alembic.migration when populating Neutron database on MariaDB 10.0
Due to this bug Neutron will only work with version <= 5.5 of mysql/mariadb, e.g. older versions. Downgrading to 5.5 isn't a solution, it's a workaround! It also means there is no database upgrade path for OpenStack, and this version limitation isn't mentioned anywhere in the documentation. I'd say that's a pretty big deal that somebody should look at! If not a Neutron core developer, then somebody that works on SQLAlchemy. If nobody is willing to address the actual technical issue then at least the version limitation should be added to the documentation. Can't force you to work on this, just saying that I think ignoring this would be a mistake. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: SQL error during alembic.migration when populating Neutron database on MariaDB 10.0 To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: SQL error during alembic.migration when populating Neutron database on MariaDB 10.0
** Summary changed: - Openstack Neutron Database error on filling database + SQL error during alembic.migration when populating Neutron database on MariaDB 10.0 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: SQL error during alembic.migration when populating Neutron database on MariaDB 10.0 To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: Openstack Neutron Database error on filling database
So this is indeed a bug, but the real problem is not so much the neutron database model itself but SQLAlchemy/Alembic generating SQL that doesn't work on MariaDB 10.0. Has MariaDB 10.0 broken SQL syntax? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: Openstack Neutron Database error on filling database To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: Openstack Neutron Database error on filling database
Can confirm that I've got the same problem on Ubuntu 14.04, Openstack Juno using the cloud-archive repository (juno-staging), ML2 with OVS and L2population plugins, flat and vxlan network(s), L3 HA and DVR enabled. Used puppet-neutron to deploy. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: Openstack Neutron Database error on filling database To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: Openstack Neutron Database error on filling database
** Changed in: neutron Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: Openstack Neutron Database error on filling database To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1384555] Re: Openstack Neutron Database error.
** Also affects: neutron (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1384555 Title: Openstack Neutron Database error. To manage notifications about this bug go to: https://bugs.launchpad.net/neutron/+bug/1384555/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1147696] Re: Spamassassin crashes on one particular mail message
** Changed in: spamassassin (Ubuntu) Status: Invalid => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to spamassassin in Ubuntu. https://bugs.launchpad.net/bugs/1147696 Title: Spamassassin crashes on one particular mail message To manage notifications about this bug go to: https://bugs.launchpad.net/spamassassin/+bug/1147696/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1147696] Re: Spamassassin crashes on one particular mail message
Hi all, I was hitted by the same problem on the same Ubuntu version 12.04 However I found a better upstream bug to explain it: https://issues.apache.org/SpamAssassin/show_bug.cgi?id=6745 so it seems that the problem has been fixed on version 3.4 but Ubuntu 12.04 is running spamassassin 3.3.. ** Bug watch added: SpamAssassin Bugzilla #6745 http://issues.apache.org/SpamAssassin/show_bug.cgi?id=6745 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to spamassassin in Ubuntu. https://bugs.launchpad.net/bugs/1147696 Title: Spamassassin crashes on one particular mail message To manage notifications about this bug go to: https://bugs.launchpad.net/spamassassin/+bug/1147696/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1347147] Re: krb5 database operations enter infinite loop
Confirmed that 1.12+dfsg-2ubuntu5 from trusty-proposed fixes the bug on amd64. ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/1347147 Title: krb5 database operations enter infinite loop To manage notifications about this bug go to: https://bugs.launchpad.net/gcc/+bug/1347147/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1359656] Re: Install the Database service in OpenStack Installation Guide for Ubuntu 12.04/14.04 (LTS) - icehouse
Appears to be a packaging problem - patching in ubuntu as well,. ** Also affects: openstack-trove (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1359656 Title: Install the Database service in OpenStack Installation Guide for Ubuntu 12.04/14.04 (LTS) - icehouse To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1359656/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1354291] Re: Missing api-paste.ini file for Trove
** Also affects: openstack-trove (Ubuntu) Importance: Undecided Status: New ** No longer affects: openstack-manuals -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openstack-trove in Ubuntu. https://bugs.launchpad.net/bugs/1354291 Title: Missing api-paste.ini file for Trove To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openstack-trove/+bug/1354291/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1353944] [NEW] Typo in package description
Public bug reported: In the description it says AMPQ rather than AMQP. ** Affects: txamqp (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to txamqp in Ubuntu. https://bugs.launchpad.net/bugs/1353944 Title: Typo in package description To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/txamqp/+bug/1353944/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1347147] Re: krb5 database operations enter infinite loop
Edited description to include text from Sam that was omitted when we
crossed edits.
** Description changed:
[Impact]
On krb5 KDC databases with more than a few hundred principals,
operations can enter an infinite loop in the database library. This
affects both read and write operations. If operators are fortunate,
they will encounter this bug while testing a migration. If they are not
so fortunate, they will encounter this bug in a production KDC when the
number of principals crosses the threshold where this bug manifests,
resulting in a service outage and possible database corruption.
Probably the only way to restore service in that situation is to install
a patched KDC or to downgrade to an unaffected version.
Both Trusty and Utopic amd64 have been verified to have this issue.
One concrete reported example is an invocation of kdb5_util load (as
part of a slave KDC propagation) spinning:
http://mailman.mit.edu/pipermail/kerberos/2014-July/020007.html
Additional failure modes are likely
- The proposed fix at
https://launchpad.net/~hartmans/+archive/ubuntu/ubuntu-fixes
- works around a compiler optimizer bug in the gcc-4.8 series, which
incorrectly deduces that a strict aliasing violation has occurred and
miscompiles part of the bundled libdb2 library that the KDC database back end
depends upon. The miscompilation causes a data structure to contain an
inappropriate cycle, which leads to an infinite loop when the structure is
traversed.
+ A branch is linked including the upstream work around for this bug,
+ along with two other patches to bugs already nominated for trusty
+ applied to the krb5 in trusty.
+
+ For utopic, the simplest fix is to rebuild krb5 with the compiler
+ currently in utopic. An alternative is to request that the Debian
+ maintainers (both monitoring this bug for such a request) upload the
+ upstream work around to Debian and sync that. You could do an ubuntu-
+ specific upload but it seems undesirable to introduce a change between
+ Ubuntu and Debian when all the right parties are happy to avoid it.
+
+ The upstream patch works around a compiler optimizer bug in the gcc-4.8
+ series, which incorrectly deduces that a strict aliasing violation has
+ occurred and miscompiles part of the bundled libdb2 library that the KDC
+ database back end depends upon. The miscompilation causes a data
+ structure to contain an inappropriate cycle, which leads to an infinite
+ loop when the structure is traversed.
[Test Case]
apt-get install krb5-kdc krb5-admin-server
kdb5_util -W -r T create -s
awk 'BEGIN{ for (i = 0; i < 1024; i++) { printf("ank -randkey a%06d\n", i) }
}' /dev/null | kadmin.local -r T
(Enter any password for the master key when requested.)
On platforms with this issue, kadmin.local spins consuming 100% CPU
after a few hundred principals have been created. (This is "a000762" on
two examples.)
To clean up,
rm /etc/krb5kdc/principal*
or
krb5kdc -r T destroy
but the latter can possibly enter the same infinite loop.
[Regression Potential]
Negligible.
It is theoretically possible that our upstream workaround, which
involves using TAILQ macros instead of CIRCLEQ macros in the bundled
libdb2 that backs the KDC database, will have some as-yet undiscovered
bugs or compiler interactions with consequences worse than this current
issue. I think this is rather unlikely.
The patched libdb2 passes both the extensive libdb2 test suite and the
rest of the krb5 test suite. Prior to patching, compiling krb5 with an
affected gcc would cause the krb5 test suite to stall when it reached
the libdb2 test suite. (The test suite stall is how we became aware of
the gcc optimizer bug.)
The BSD TAILQ macros are generally considered to be safer than the
CIRCLEQ macros, and the various open-source BSD derivatives have made
the corresponding change to their libdb sources years ago, with no
reported ill effects that I can see.
-
Original report from Ben Kaduk:
==
In some conditions, propagating a kerberos database to a slave KDC server can
stall.
This is due to a misoptimization by gcc 4.8 of the CIRCLEQ famliy of macros,
apparently due to overzealous strict aliasing deductions.
One case of this stall is reported at
http://mailman.mit.edu/pipermail/kerberos/2014-July/020007.html (and the
rest of the thread), and there is an entry in the upstream bugtracker at
http://krbdev.mit.edu/rt/Ticket/Display.html?id=7860 .
gcc 4.9 (as used in Debian unstable at present) is not believed to
induce this problem. Upstream has patched their code to use the TAILQ
family of macros instead, as a workaround, but that workaround has not
yet appeared in an upstream release:
https://github.com/krb5/krb5/commit/26d8744129
Because of the different compiler versions used on Debian and Ubuntu, I
am filing this as an Ubu
[Bug 1347147] Re: krb5 database operations enter infinite loop
** Description changed:
- In some conditions, propagating a kerberos database to a slave KDC server or
performing other database operations can stall. As we've investigated the
issue, it looks like a database with more than a few hundred principals is very
likely to run into this issue.
+ [Impact]
+
+ On krb5 KDC databases with more than a few hundred principals,
+ operations can enter an infinite loop in the database library. This
+ affects both read and write operations. If operators are fortunate,
+ they will encounter this bug while testing a migration. If they are not
+ so fortunate, they will encounter this bug in a production KDC when the
+ number of principals crosses the threshold where this bug manifests,
+ resulting in a service outage and possible database corruption.
+ Probably the only way to restore service in that situation is to install
+ a patched KDC or to downgrade to an unaffected version.
+
+ Both Trusty and Utopic amd64 have been verified to have this issue.
+
+ One concrete reported example is an invocation of kdb5_util load (as
+ part of a slave KDC propagation) spinning:
+
+ http://mailman.mit.edu/pipermail/kerberos/2014-July/020007.html
+
+ Additional failure modes are likely
+
+ The proposed fix at
https://launchpad.net/~hartmans/+archive/ubuntu/ubuntu-fixes
+ works around a compiler optimizer bug in the gcc-4.8 series, which
incorrectly deduces that a strict aliasing violation has occurred and
miscompiles part of the bundled libdb2 library that the KDC database back end
depends upon. The miscompilation causes a data structure to contain an
inappropriate cycle, which leads to an infinite loop when the structure is
traversed.
+
+ [Test Case]
+
+ apt-get install krb5-kdc krb5-admin-server
+ kdb5_util -W -r T create -s
+ awk 'BEGIN{ for (i = 0; i < 1024; i++) { printf("ank -randkey a%06d\n", i) }
}' /dev/null | kadmin.local -r T
+
+ (Enter any password for the master key when requested.)
+
+ On platforms with this issue, kadmin.local spins consuming 100% CPU
+ after a few hundred principals have been created. (This is "a000762" on
+ two examples.)
+
+ To clean up,
+
+ rm /etc/krb5kdc/principal*
+
+ or
+
+ krb5kdc -r T destroy
+
+ but the latter can possibly enter the same infinite loop.
+
+ [Regression Potential]
+
+ Negligible.
+
+ It is theoretically possible that our upstream workaround, which
+ involves using TAILQ macros instead of CIRCLEQ macros in the bundled
+ libdb2 that backs the KDC database, will have some as-yet undiscovered
+ bugs or compiler interactions with consequences worse than this current
+ issue. I think this is rather unlikely.
+
+ The patched libdb2 passes both the extensive libdb2 test suite and the
+ rest of the krb5 test suite. Prior to patching, compiling krb5 with an
+ affected gcc would cause the krb5 test suite to stall when it reached
+ the libdb2 test suite. (The test suite stall is how we became aware of
+ the gcc optimizer bug.)
+
+ The BSD TAILQ macros are generally considered to be safer than the
+ CIRCLEQ macros, and the various open-source BSD derivatives have made
+ the corresponding change to their libdb sources years ago, with no
+ reported ill effects that I can see.
+
+
+ Original report from Ben Kaduk:
+
+ ==
+
+ In some conditions, propagating a kerberos database to a slave KDC server can
stall.
This is due to a misoptimization by gcc 4.8 of the CIRCLEQ famliy of macros,
apparently due to overzealous strict aliasing deductions.
One case of this stall is reported at
http://mailman.mit.edu/pipermail/kerberos/2014-July/020007.html (and the
rest of the thread), and there is an entry in the upstream bugtracker at
http://krbdev.mit.edu/rt/Ticket/Display.html?id=7860 .
gcc 4.9 (as used in Debian unstable at present) is not believed to
induce this problem. Upstream has patched their code to use the TAILQ
family of macros instead, as a workaround, but that workaround has not
yet appeared in an upstream release:
https://github.com/krb5/krb5/commit/26d8744129
- A branch is linked including this upstream work around and two other
- patches to bugs already nominated for trusty applied to the krb5 in
- trusty. We believe the impact is significant because this is likely to
- be a problem for sites with a large database running trusty. The
- regression potential is very small. The upstream work around changes
- from one family of queue macros that are stable and well-tested to
- another.
-
- For utopic, the simplest fix is to rebuild krb5 with the compiler
- currently in utopic. An alternative is to request that the Debian
- maintainers (both monitoring this bug for such a request) upload the
- upstream work around to Debian and sync that. You could do an ubuntu-
- specific upload but it seems undesirable to introduce a change between
- Ubuntu and Debian when all the right parties are happy to avoid it.
-
Because of the different compiler versions used on Deb
[Bug 1347147] Re: krb5 database operations enter infinite loop
** Summary changed: - krb5 database propagation enters infinite loop + krb5 database operations enter infinite loop -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/1347147 Title: krb5 database operations enter infinite loop To manage notifications about this bug go to: https://bugs.launchpad.net/gcc/+bug/1347147/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1347147] Re: krb5 database propagation enters infinite loop
This problem is broader than slave KDCs; it can potentially affect any
write operation on a KDC with sufficiently many (more than a few
hundred) principals, causing database corruption or denial of service.
Altering the test case to create one principal per invocation of
kadmin.local shows that the spin condition depends on database contents
rather than process memory history.
It also manifests during krb5_db_get_principal(), not just
krb5_db_put_principal(), as shown in the below stack trace. Note the
krb5_db_get_principal() call in the stack trace is the one that is meant
to verify the master key.
Altered test case showing the spin condition on a fresh kadmin.local
invocation:
kdb5_util -W -r T create -s
awk 'BEGIN { for (i = 0; i < 1024; i++) { printf("%06d\n", i) } }' /dev/null |
(set -e; while read p; do kadmin.local -r T -q "ank -randkey $p"; done)
I still recommend preferring the test case I gave in comment #1 because
it executes more quickly.
kadmin.local stack trace:
(gdb) bt
#0 0x7f3fa70dbcbc in ?? ()
from /usr/lib/x86_64-linux-gnu/krb5/plugins/kdb/db2.so
#1 0x7f3fa70d90bc in ?? ()
from /usr/lib/x86_64-linux-gnu/krb5/plugins/kdb/db2.so
#2 0x7f3fa70d7bc9 in ?? ()
from /usr/lib/x86_64-linux-gnu/krb5/plugins/kdb/db2.so
#3 0x7f3fa70d0ab6 in ?? ()
from /usr/lib/x86_64-linux-gnu/krb5/plugins/kdb/db2.so
#4 0x7f3fa70d1bf4 in ?? ()
from /usr/lib/x86_64-linux-gnu/krb5/plugins/kdb/db2.so
#5 0x7f3fa79d0047 in krb5_db_get_principal ()
from /usr/lib/x86_64-linux-gnu/libkdb5.so.7
#6 0x7f3fa79d365b in ?? () from /usr/lib/x86_64-linux-gnu/libkdb5.so.7
#7 0x7f3fa79d02c0 in krb5_db_fetch_mkey_list ()
from /usr/lib/x86_64-linux-gnu/libkdb5.so.7
#8 0x7f3fa9140f78 in kdb_init_master ()
from /usr/lib/x86_64-linux-gnu/libkadm5srv_mit.so.9
#9 0x7f3fa9141e90 in kadm5_init ()
from /usr/lib/x86_64-linux-gnu/libkadm5srv_mit.so.9
#10 0x00404659 in ?? ()
#11 0x00402bbc in ?? ()
#12 0x7f3fa8263ec5 in __libc_start_main (main=0x402b70, argc=5,
argv=0x7fff76716738, init=, fini=,
rtld_fini=, stack_end=0x7fff76716728) at libc-start.c:287
#13 0x00402c96 in ?? ()
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1347147
Title:
krb5 database propagation enters infinite loop
To manage notifications about this bug go to:
https://bugs.launchpad.net/gcc/+bug/1347147/+subscriptions
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1347147] Re: krb5 database propagation enters infinite loop
I confirm that the packages at https://launchpad.net/~hartmans/+archive/ubuntu/ubuntu-fixes appear to fix the problem for Trusty amd64, based on the test case in comment #1. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/1347147 Title: krb5 database propagation enters infinite loop To manage notifications about this bug go to: https://bugs.launchpad.net/gcc/+bug/1347147/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1349941] Re: qemu-ppc segfault on simple hello world
This sounds like it could be the problem fixed by this: commit a70daba3771e96cc6b8fd3d11ed297ab13717018 Author: Alexander Graf Date: Thu Jun 5 11:39:43 2014 +0200 linux-user: Tell guest about big host page sizes We tell the guest its page size via AUX vectors. The guest process then uses this page size as information on which boundaries it can mmap() things. However, if the host has a bigger page size granularity than the guest, it can not fulfill these mmap() requests - which falls apart when MAP_FIXED is passed to mmap. So in that case, let the guest know that we're running on a bigger page size granularity than the target would require. This fixes running qemu-ppc (TARGET_PAGE_SIZE=4k) on a 64k page size ppc64 host for me. Signed-off-by: Alexander Graf Reviewed-by: Richard Henderson or possibly by this: commit f46e9a0b9911fcfbc13f85f3a8808067990a0f5c Author: Tom Musta Date: Thu May 29 09:12:23 2014 -0500 target-ppc: Confirm That .bss Pages Are Valid The existing code does a check to ensure that a .bss region is properly mmap'd. When additional mmap is required, the (guest) pages are also validated. However, this code has a bug: when host page size is larger than target page size, it is possible for the .bss pages to already be (host) mapped but the guest .bss pages may not be valid. The check to mmap additional space is separated from the flagging of the target (guest) pages, thus ensuring that both aspects are done properly. Signed-off-by: Tom Musta Signed-off-by: Alexander Graf -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu in Ubuntu. https://bugs.launchpad.net/bugs/1349941 Title: qemu-ppc segfault on simple hello world To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1349941/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1347147] Re: krb5 database propagation enters infinite loop
Test case:
On Ubuntu 14.04 on amd64, install krb5-admin-server and krb5-kdc.
kdb5_util -W -r T create -s
awk 'BEGIN{ for (i = 0; i < 1024; i++) { printf("ank -randkey a%06d\n", i) } }'
/dev/null | kadmin.local -r T
For me, kadmin.local begins consuming nearly 100% CPU starting at
"a000762". This implies that sites with more than a few hundred
principals are likely to find running a KDC using the 14.04 krb5
packages impossible.
** Changed in: krb5 (Ubuntu)
Status: New => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/1347147
Title:
krb5 database propagation enters infinite loop
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1347147/+subscriptions
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1242376] Re: "reload php5-fpm" crashes
We ran into this bug while upgrading our servers from 12.04 LTS to 14.04 LTS. It is serious for us. When we deploy our app, we need to do `service php5-fpm reload` so that the php opcode cache is flushed, otherwise old files will still be served. Doing a `php5-fpm restart` isn't a option as it does not handle existing connections gracefully. We would really really appreciate for this bug to be fixed in the Ubuntu repos. It is really not a good bug to have in a LTS release for folks who run PHP. It will catch many people out. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to php5 in Ubuntu. https://bugs.launchpad.net/bugs/1242376 Title: "reload php5-fpm" crashes To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/php5/+bug/1242376/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 872824] Re: Network-manager locks up when adding strongSwan VPN connection
Here are the steps to install the 12.10 binaries on 12.04: % wget http://launchpadlibrarian.net/108979339/network-manager-strongswan_1.3.0-0ubuntu1_amd64.deb % wget http://launchpadlibrarian.net/108979332/strongswan-nm_4.5.2-1.5ubuntu2_amd64.deb % wget http://launchpadlibrarian.net/108979331/strongswan-ikev2_4.5.2-1.5ubuntu2_amd64.deb % wget http://launchpadlibrarian.net/108979327/libstrongswan_4.5.2-1.5ubuntu2_amd64.deb % sudo dpkg -i libstrongswan_4.5.2-1.5ubuntu2_amd64.deb % sudo dpkg -i strongswan-ikev2_4.5.2-1.5ubuntu2_amd64.deb % sudo dpkg -i strongswan-nm_4.5.2-1.5ubuntu2_amd64.deb % sudo dpkg -i network-manager-strongswan_1.3.0-0ubuntu1_amd64.deb I can confirm this gets you past the hang and lets the config dialog appear. I can't confirm that strongswan itself is functional, as the other end of the connection I'm testing requires a pre-shared key, and the strongswan wiki[1] page on the Network Manager plugin notes that, "PSK is not supported, as it is considered insecure if the secrets are not strong enough." (So PSK is supported by strongswan (as documented elsewhere), just not by the Network Manager plugin. Thanks for the value judgment.) 1. http://wiki.strongswan.org/projects/strongswan/wiki/NetworkManager Reinstalling openswan. -Tom -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to strongswan in Ubuntu. https://bugs.launchpad.net/bugs/872824 Title: Network-manager locks up when adding strongSwan VPN connection To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plasma-widget-networkmanagement/+bug/872824/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1157864] Re: [SRU] Requests to https server can yield WantReadError
** Changed in: python-glanceclient Status: Fix Committed => Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to python-glanceclient in Ubuntu. https://bugs.launchpad.net/bugs/1157864 Title: [SRU] Requests to https server can yield WantReadError To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1157864/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1319616] [NEW] package samba-libs (not installed) failed to install/upgrade: 子程序 新的 pre-installation script 傳回了錯誤退出狀態 1
Public bug reported: For some unknown reason (config errror) that samba failed to upgrade ProblemType: Package DistroRelease: Ubuntu 14.04 Package: samba-libs (not installed) ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9 Uname: Linux 3.13.0-24-generic x86_64 ApportVersion: 2.14.1-0ubuntu3 Architecture: amd64 Date: Sat May 10 04:01:16 2014 DpkgHistoryLog: Start-Date: 2014-05-10 04:00:59 Commandline: apt-get -f install Install: samba-libs:amd64 (4.1.6+dfsg-1ubuntu2, automatic) DuplicateSignature: package:samba-libs:(not installed):子程序 新的 pre-installation script 傳回了錯誤退出狀態 1 ErrorMessage: 子程序 新的 pre-installation script 傳回了錯誤退出狀態 1 NmbdLog: SambaServerRegression: Yes SmbConfIncluded: Yes SmbLog: SourcePackage: samba Title: package samba-libs (not installed) failed to install/upgrade: 子程序 新的 pre-installation script 傳回了錯誤退出狀態 1 UbuntuFailedConnect: Yes UpgradeStatus: Upgraded to trusty on 2014-05-02 (12 days ago) ** Affects: samba (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package trusty -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/1319616 Title: package samba-libs (not installed) failed to install/upgrade: 子程序 新的 pre-installation script 傳回了錯誤退出狀態 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1319616/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1303876] Re: VPN agent dependencies are foobar
Unlike the l3 agent package the vpn agent package is lacking the /etc/init/neutron-l3-agent.conf file required to start the l3 agent. Does the vpn agent provide a superset of functionality which means that if you're already running the vpn agent you don't need to separately run the l3 agent? Or is this a mistake which means this bug needs to be reopened? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to neutron in Ubuntu. https://bugs.launchpad.net/bugs/1303876 Title: VPN agent dependencies are foobar To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1303876/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1302044] Re: permissions on /var/lib/glance/image* are wrong
** Changed in: openstack-manuals Status: New => Fix Released ** Changed in: openstack-manuals Importance: Undecided => Medium ** Changed in: openstack-manuals Importance: Medium => High ** Changed in: openstack-manuals Milestone: None => icehouse -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to glance in Ubuntu. https://bugs.launchpad.net/bugs/1302044 Title: permissions on /var/lib/glance/image* are wrong To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1302044/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1308314] [NEW] incorrect balancing in weight value 256
Public bug reported: Haproxy can work correctly with wight 256, the node with weight 256 either takes all the traffic or takes none traffic: 1-1 weight: web1:256, web2:1, web3:1 (incorrect case.) (1024 accesses * 3 times to vip) result 1 web1: 1024 web2: 0 web3: 0 result 2 web1: 1024 web2: 0 web3: 0 result 3 web1 counted: 1024 web2 counted: 0 web3 counted: 0 1-2 weight: web1:255, web2:1, web3:1 (correct case.) (1024 accesses * 3 times to vip) result 1 web1 counted: 1017 web2 counted: 4 web3 counted: 3 result 2 web1 counted: 1016 web2 counted: 4 web3 counted: 4 result 3 web1 counted: 1016 web2 counted: 4 web3 counted: 4 2-1 web1:256, web2:128, web3:128 (incorrect case.) (256 accesses * 3 times to vip) result 1 web1 counted: 1 web2 counted: 128 web3 counted: 127 result 2 web1 counted: 0 web2 counted: 128 web3 counted: 128 result 3 web1 counted: 0 web2 counted: 128 web3 counted: 128 2-2 web1:255, web2:128, web3:128(correct case.) (256 accesses * 3 times to vip) result 1 web1 counted: 128 web2 counted: 64 web3 counted: 64 result 2 web1 counted: 128 web2 counted: 64 web3 counted: 64 result 3 web1 counted: 128 web2 counted: 64 web3 counted: 64 >From the haproxy aspect, they have fixed a bug of "Roundrobin can not work well when a server's weight is 256" , make sure that below patch has been used on above environment. Mail of "Roundrobin can not work well when a server's weight is 256" https://www.mail-archive.com/haproxy@formilux.org/msg10613.html Patch: https://dev.openwrt.org/browser/packages/net/haproxy/patches/0005-BUG-MEDIUM-server-set-the-macro-for-server-s-max-wei.patch ** Affects: haproxy (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to haproxy in Ubuntu. https://bugs.launchpad.net/bugs/1308314 Title: incorrect balancing in weight value 256 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/haproxy/+bug/1308314/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1304789] [NEW] keystone packages for 14.04 don't set a log_dir
Public bug reported: the log_dir variable in /etc/keystone/keystone.conf configures where logs should be written to. On ubuntu, this should be /var/log/keystone Currently, packages on 14.04 (keystone 2014.1~rc2-0ubuntu1) do not set this variable, meaning logging will not work out of the box. ** Affects: keystone (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to keystone in Ubuntu. https://bugs.launchpad.net/bugs/1304789 Title: keystone packages for 14.04 don't set a log_dir To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/keystone/+bug/1304789/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1301122] [NEW] Horizon Icehouse rc-1 in trusty does not work out of the box
Public bug reported: Hi, On Precise, using the cloud archive rc-1 packages, horizon works out of the box, installed using: # apt-get install memcached libapache2-mod-wsgi openstack-dashboard (Havana on precise worked in the same way) In Trusty, that install line no longer pulls in apache2, and does not enable the horizon config ... which is probably a good thing, because even with libapache2-mod-wsgi installed: # service apache2 restart * Restarting web server apache2 [fail] * The apache2 configtest failed. Output of config test was: AH00526: Syntax error on line 1 of /etc/apache2/conf-enabled/openstack-dashboard.conf: Invalid command 'WSGIScriptAlias', perhaps misspelled or defined by a module not included in the server configuration Action 'configtest' failed. I'd love to know if I'm going wrong somewhere here :) # apt-cache showpkg libapache2-mod-wsgi Package: libapache2-mod-wsgi Versions: 3.4-4ubuntu2 (/var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: 524e8bdbab4989bd739c548590367eb6 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: 524e8bdbab4989bd739c548590367eb6 # apt-cache showpkg openstack-dashboard Package: openstack-dashboard Versions: 1:2014.1~rc1-0ubuntu1 (/var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages) (/var/lib/dpkg/status) Description Language: File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_binary-amd64_Packages MD5: cfa8179aec54fb294480d24dfa12c4c6 Description Language: en File: /var/lib/apt/lists/free.nchc.org.tw_ubuntu_dists_trusty_main_i18n_Translation-en MD5: cfa8179aec54fb294480d24dfa12c4c6 ** Affects: horizon (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to horizon in Ubuntu. https://bugs.launchpad.net/bugs/1301122 Title: Horizon Icehouse rc-1 in trusty does not work out of the box To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/horizon/+bug/1301122/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1297140] Re: Install the Orchestration service in OpenStack Installation Guide for Ubuntu 12.04 (LTS) - icehouse
** Also affects: heat (Ubuntu) Importance: Undecided Status: New ** Summary changed: - Install the Orchestration service in OpenStack Installation Guide for Ubuntu 12.04 (LTS) - icehouse + Ubuntu 12.04 (LTS) - icehouse - heat packaging issues ** Changed in: openstack-manuals Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to heat in Ubuntu. https://bugs.launchpad.net/bugs/1297140 Title: Ubuntu 12.04 (LTS) - icehouse - heat packaging issues To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1297140/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1078213] Re: juju-machine-agent.log/logs are not logrotated
** Tags removed: canonical-webops ** Tags added: canonical-is -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to juju in Ubuntu. https://bugs.launchpad.net/bugs/1078213 Title: juju-machine-agent.log/logs are not logrotated To manage notifications about this bug go to: https://bugs.launchpad.net/juju-core/+bug/1078213/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1260845] Re: libkrb5-dev version 1.10-beta1 has broken RDNS support
This is probably the same as bug 571572. Technically the upstream patch is a workaround for a glibc bug. This is probably deserving of an SRU for Precise. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/1260845 Title: libkrb5-dev version 1.10-beta1 has broken RDNS support To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1260845/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1244713] Re: invalid syntax for check_ssh plugin
Wow, that was quick, good job guys =) Thanks, Tom -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nagios-plugins in Ubuntu. https://bugs.launchpad.net/bugs/1244713 Title: invalid syntax for check_ssh plugin To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nagios-plugins/+bug/1244713/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1244713] [NEW] invalid syntax for check_ssh plugin
Public bug reported:
Since upgrading to 13.10 our check_ssh has been failing with the
error:"Usage:" with an "unknown" state.
After a little digging it seems that the following file has the incorrect
definition for the check_ssh checker:
/etc/nagios-plugins/config/ssh.cfg
Specifically the first section:
define command{
command_namecheck_ssh
command_line/usr/lib/nagios/plugins/check_ssh '$HOSTADDRESS$'
'$ARG1$'
}
Changing the command _line like this fixes the issue and checks resume as
normal:
command_line/usr/lib/nagios/plugins/check_ssh '$HOSTADDRESS$'
Regards,
Tom
** Affects: nagios-plugins (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to nagios-plugins in Ubuntu.
https://bugs.launchpad.net/bugs/1244713
Title:
invalid syntax for check_ssh plugin
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nagios-plugins/+bug/1244713/+subscriptions
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1210253] Re: With Havana 2 installed, Launching horizon UI results in the error " NameError: name 'Dashboard' is not defined"
This bug is still present in the Ubuntu cloud archive. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to horizon in Ubuntu. https://bugs.launchpad.net/bugs/1210253 Title: With Havana 2 installed, Launching horizon UI results in the error " NameError: name 'Dashboard' is not defined" To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1210253/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1022612] Re: private instance IPs can only reach public IPs in other regions, not the same region
>From http://docs.openstack.org/folsom/openstack-compute/admin/content /associating-public-ip.html: """ Traffic between VMs using floating IPs: Note that due to the way floating IPs are implemented using a source NAT (SNAT rule in iptables), inconsistent behaviour of security groups can be seen if VMs use their floating IP to communicate with other virtual machines - particularly on the same physical host. Traffic from VM to VM accross the fixed network does not have this issue, and this is the recommended path. To ensure traffic doesn't get SNATed to the floating range, explicitly set dmz_cidr=x.x.x.x/y. x.x.x.x/y is the range of floating ips for each pool of floating ips you define. This configuration is also necessary to make source_groups work if the vms in the source group have floating ips. """ This might help... -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/1022612 Title: private instance IPs can only reach public IPs in other regions, not the same region To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nova/+bug/1022612/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 623608] Re: Syslog time it's wrong
This bug is still open after 2 1/2 year We're also affected. tftpd logs wrong times to syslog (UTC time instead of timezone). It would be great if someone could resolve this. I took a look at the other logs, so I can assure it's tftp and not xinetd, since SSH logs correct time. Maybe even a upstream (Debian) bug? Cheers, Tom Mar 27 16:29:02 wizard dhcpd: DHCPACK [...] Mar 27 15:29:02 wizard in.tftpd[6864]: RRQ from [...] -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to tftp-hpa in Ubuntu. https://bugs.launchpad.net/bugs/623608 Title: Syslog time it's wrong To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/tftp-hpa/+bug/623608/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 571572] Re: krb5 prefers the reverse pointer no matter what for locating service tickets.
Additional experimentation indicates that Raring has a partial fix to glibc that results in the observed libkrb5 behavior of rdns=false working as intended. SRUs are still a good idea for earlier Ubuntu releases. See also bug 1057526 for the underlying glibc bug. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/571572 Title: krb5 prefers the reverse pointer no matter what for locating service tickets. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/571572/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 571572] Re: krb5 prefers the reverse pointer no matter what for locating service tickets.
I can see no obvious source code changes to the krb5 packages between Quantal and Raring that would result in the observed behavior of rdns=false functioning on stock Raring libkrb5-3 but not on Quantal. It's possible that the underlying bug in glibc got fixed in the meanwhile. I haven't confirmed the Raring result personally yet, but I do confirm that Precise is broken. I'll try to set up a public-facing test fixture soon. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/571572 Title: krb5 prefers the reverse pointer no matter what for locating service tickets. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/571572/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 571572] Re: krb5 prefers the reverse pointer no matter what for locating service tickets.
I would strongly recommend SRUs for all supported releases, because this is a high-impact bug for people who are deploying krb5 in environments where they do not have tight control over their reverse DNS information. Experience has shown that this type of hard-to-debug DNS interaction leads to a lot of frustration and wasted time. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/571572 Title: krb5 prefers the reverse pointer no matter what for locating service tickets. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/571572/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1095757] Re: krb5 packages should be updated to v. >=1.10.2 to workaround bug with gssapi kerberos authentication
There is some additional information and history in launchpad bug 571572, which this bug report might be considered a duplicate of. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/1095757 Title: krb5 packages should be updated to v. >=1.10.2 to workaround bug with gssapi kerberos authentication To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/1095757/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 262892] Re: Possible bug found in SSHD and tunneling(Based on question number 43605)
FYI.. this is probably related to SSHD and not ubuntu. This happens on archlinux as well, and may have something to do with DNS lookups that are forwarded through the SSH proxy. Changing "AddressFamily inet" in sshd_config may help, as that prevents the dns from doing ipv6 lookups. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/262892 Title: Possible bug found in SSHD and tunneling(Based on question number 43605) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/openssh/+bug/262892/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1076461] Re: unmatched entries for smartd
Also: smartd 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-33-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net Device: /dev/sda [SAT], ST95005620AS, S/N:5YX12P01, WWN:5-000c50-038cde7d2, FW:SD26, 500 GB Device: /dev/sdb [SAT], WDC WD3200BEKT-22F3T0, S/N:WD-WXM908SJ1447, WWN:5-0014ee-2023443ed, FW:11.01A11, 320 GB -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to logwatch in Ubuntu. https://bugs.launchpad.net/bugs/1076461 Title: unmatched entries for smartd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1076461/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1076461] [NEW] unmatched entries for smartd
Public bug reported: logwatch 7.4.0+svn20111221rev79-1ubuntu1 on Ubuntu 12.04.1 These all look like pretty mundane, non-error entries that should be filtered out: **Unmatched Entries** Device: /dev/sdb [SAT], offline data collection was suspended by an interrupting command from host (auto:on) Device: /dev/sda [SAT], previous self-test was interrupted by the host with a reset Device: /dev/sdb [SAT], offline data collection was completed without error (auto:on) Device: /dev/sdb [SAT], offline data collection was suspended by an interrupting command from host (auto:on) Device: /dev/sdb [SAT], offline data collection was completed without error (auto:on) ** Affects: logwatch (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to logwatch in Ubuntu. https://bugs.launchpad.net/bugs/1076461 Title: unmatched entries for smartd To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1076461/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1076464] [NEW] unmatched entries for gnome-screensaver
Public bug reported: logwatch 7.4.0+svn20111221rev79-1ubuntu1 on Ubuntu 12.04.1 I am running Cinnamon desktop, which might impact the presence of this message, but that seems unlikely, as gnome-screensaver is common to several desktops. **Unmatched Entries** gnome-screensaver-dialog: gkr-pam: unlocked login keyring: 2 Time(s) ** Affects: logwatch (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to logwatch in Ubuntu. https://bugs.launchpad.net/bugs/1076464 Title: unmatched entries for gnome-screensaver To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/logwatch/+bug/1076464/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1061665] Re: Filter scheduler not respecting the force_hosts hint
openstacl-manuals: to fix this bug $ nova boot --image 1 --flavor 2 --key_name test --hint force_hosts=server2 my-first-server becomes nova boot --image --flavor m1.tiny --key_name mykey --availability-zone nova:server2 An extra explanation of what an 'availability zone' is is necessary. ** Changed in: openstack-manuals Status: Won't Fix => Confirmed ** Changed in: openstack-manuals Importance: Undecided => Medium ** Tags added: nova ** Changed in: openstack-manuals Status: Confirmed => Triaged -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/1061665 Title: Filter scheduler not respecting the force_hosts hint To manage notifications about this bug go to: https://bugs.launchpad.net/openstack-manuals/+bug/1061665/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 904410] Re: Mailman configuration script causes syntax error in "/var/lib/mailman/Mailman/mm_cfg.py", line 76
Robie, here is the output of what you asked for: root@Ubuntu-12:/home/tom# debconf-show mailman mailman/queue_files_present: abort installation * mailman/default_server_language: en * mailman/site_languages: en * mailman/used_languages: * mailman/create_site_list: root@Ubuntu-12:/home/tom# stat /etc/mailman File: `/etc/mailman' Size: 4096Blocks: 8 IO Block: 4096 directory Device: 801h/2049d Inode: 9437691 Links: 3 Access: (0755/drwxr-xr-x) Uid: (0/root) Gid: (0/root) Access: 2012-09-30 21:12:28.919605766 -0400 Modify: 2012-09-30 21:12:31.935672994 -0400 Change: 2012-09-30 21:12:31.935672994 -0400 Birth: - root@Ubuntu-12:/home/tom# stat /etc/mailman/mm_cfg.py File: `/etc/mailman/mm_cfg.py' Size: 4371Blocks: 16 IO Block: 4096 regular file Device: 801h/2049d Inode: 9438281 Links: 1 Access: (0644/-rw-r--r--) Uid: (0/root) Gid: (0/root) Access: 2012-09-30 21:12:31.975673885 -0400 Modify: 2012-09-30 21:19:05.364426238 -0400 Change: 2012-09-30 21:19:05.364426238 -0400 Birth: - root@Ubuntu-12:/home/tom# stat /var/lib/mailman/Mailman/mm_cfg.py File: `/var/lib/mailman/Mailman/mm_cfg.py' -> `/etc/mailman/mm_cfg.py' Size: 22 Blocks: 0 IO Block: 4096 symbolic link Device: 801h/2049d Inode: 8264873 Links: 1 Access: (0777/lrwxrwxrwx) Uid: (0/root) Gid: (0/root) Access: 2012-09-30 08:00:01.671370480 -0400 Modify: 2012-07-17 13:45:53.0 -0400 Change: 2012-09-19 01:30:21.539650246 -0400 Birth: - root@Ubuntu-12:/home/tom# grep DEFAULT_SERVER_LANGUAGE /etc/mailman/mm_cfg.py DEFAULT_SERVER_LANGUAGE = 'en' root@Ubuntu-12:/home/tom# grep DEFAULT_SERVER_LANGUAGE /var/lib/mailman/Mailman/mm_cfg.py DEFAULT_SERVER_LANGUAGE = 'en' root@Ubuntu-12:/home/tom# Hope it helps. Tom -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mailman in Ubuntu. https://bugs.launchpad.net/bugs/904410 Title: Mailman configuration script causes syntax error in "/var/lib/mailman/Mailman/mm_cfg.py", line 76 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/mailman/+bug/904410/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1057325] Re: Error when starting glance-api - unable to redeclare queue
As Endre has noted the Ubuntu precise packages for glance are in use, targetting at Ubuntu. ** Also affects: ubuntu Importance: Undecided Status: New ** Package changed: ubuntu => glance (Ubuntu) ** Changed in: glance Status: New => Invalid ** Changed in: glance (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to glance in Ubuntu. https://bugs.launchpad.net/bugs/1057325 Title: Error when starting glance-api - unable to redeclare queue To manage notifications about this bug go to: https://bugs.launchpad.net/glance/+bug/1057325/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 708395] Re: clamdscan can't scan anything
** Changed in: clamav (Ubuntu) Status: Expired => New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to clamav in Ubuntu. https://bugs.launchpad.net/bugs/708395 Title: clamdscan can't scan anything To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/clamav/+bug/708395/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 764096] Re: DNS hostname lookups fail in chroot after natty upgrade
Sorry, false alarm, 12.04 is fine, must have been temporary DNS problems. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to postfix in Ubuntu. https://bugs.launchpad.net/bugs/764096 Title: DNS hostname lookups fail in chroot after natty upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/764096/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 764096] Re: DNS hostname lookups fail in chroot after natty upgrade
I see the exact same problem again after upgrading from 11.10 to 12.04. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to postfix in Ubuntu. https://bugs.launchpad.net/bugs/764096 Title: DNS hostname lookups fail in chroot after natty upgrade To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/postfix/+bug/764096/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 571572] Re: krb5 prefers the reverse pointer no matter what for locating service tickets.
Our fix in #6922 appears to itself have a bug; we believe that http://krbdev.mit.edu/rt/Ticket/Display.html?id=7124 resolves it. If you need a back port, http://krbdev.mit.edu/rt/Ticket/Display.html?id=7164 is for krb5-1.9.x, and http://krbdev.mit.edu/rt/Ticket/Display.html?id=7184 is for krb5-1.8.x. (given that the initial report was against 1.8.1) ** Bug watch added: krbdev.mit.edu/rt/ #7124 http://krbdev.mit.edu/rt/Ticket/Display.html?id=7124 ** Bug watch added: krbdev.mit.edu/rt/ #7164 http://krbdev.mit.edu/rt/Ticket/Display.html?id=7164 ** Bug watch added: krbdev.mit.edu/rt/ #7184 http://krbdev.mit.edu/rt/Ticket/Display.html?id=7184 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/571572 Title: krb5 prefers the reverse pointer no matter what for locating service tickets. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/571572/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1009974] Re: "nova live-migration" fails silently
** Changed in: openstack-manuals Importance: Undecided => High -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/1009974 Title: "nova live-migration" fails silently To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/1009974/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 1001088] Re: iSCSI targets are not restored following a reboot
** Changed in: nova Status: New => Confirmed ** Tags added: volume -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/1001088 Title: iSCSI targets are not restored following a reboot To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/1001088/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 573318] Re: mysql server will not start
Solution #30 works in Precise also for me, thank for work-around ! -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-dfsg-5.1 in Ubuntu. https://bugs.launchpad.net/bugs/573318 Title: mysql server will not start To manage notifications about this bug go to: https://bugs.launchpad.net/mysql-server/+bug/573318/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 824874] Re: nova-objectstore goes into a tight loop and becomes unresponsive
** Changed in: nova Status: Confirmed => Fix Released ** Changed in: nova (Ubuntu) Status: Confirmed => Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/824874 Title: nova-objectstore goes into a tight loop and becomes unresponsive To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/824874/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 833499] Re: virt/disk.py unconditionally inserts public_keys into /root/.ssh/authorized_keys
This looks to be covered by the flag libvirt_inject_key - marking as "fix released" ** Changed in: nova Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/833499 Title: virt/disk.py unconditionally inserts public_keys into /root/.ssh/authorized_keys To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/833499/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 833519] Re: lxc in nova will happily attempt to run x86_64 container on i686 arch
The merge proposal failed... is this bug still valid? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/833519 Title: lxc in nova will happily attempt to run x86_64 container on i686 arch To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/833519/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 824874] Re: nova-objectstore goes into a tight loop and becomes unresponsive
Does nova-objectstore still become unresponsive in Essex? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/824874 Title: nova-objectstore goes into a tight loop and becomes unresponsive To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/824874/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 955510] Re: failed attach leaves stale iSCSI session on compute host
Hi,
I am convinced this bug is partially fixes, though not completely. I can
recreate the issue very simply:
1) As a first point, let's use KVM/libvirt/Essex release on Ubuntu 12.04
(up to date as of 5/11/2012);
2) Create a volume (pick a size);
3) Attach that volume to a VM, supplying, /dev/vdz as your attach;
On my hardware (Dell) that creates precisely the bug given above. Logs
are below. Those are the last nova-computes that will occur until it's
restarted.
After this log, virsh *will* respond to virsh list--all, but nova-
compute is no longer responsive. If I thereafter stop nova-compute, and
restart, it will never start because at that point libvirt is hung (even
virsh cannot connect, though it could prior to the nova-compute
restart).
As for attaching under normal circumstances (pick /dev/vdc for your
first attach), and all goes well. However, I do not (re)raise the
'stupid device' thing, for instance /dev/vdz, just to raise this bug.
I'm working with another team using HP Proliant DL380G6 with BIOS v.
P62, and it exhibits precisely the error in *all* cases of /dev/vdc, but
not using higher device names (e.g., /dev/vdx) -- in that case, the VM
has only /dev/vda at that point.
In any event, this is a pretty bad situation.
2012-05-14 15:13:16 DEBUG nova.rpc.amqp [-] received {u'_context_roles':
[u'Member', u'admin', u'developer'], u'_context_request_id':
u'req-ac084e00-207c-43d1-a856-f5c15e2fffc3', u'_context_read_deleted': u'no',
u'args': {u'instance_uuid': u'6c87ccb4-3bd9-4e5e-88e9-905af0c919f3',
u'mountpoint': u'/dev/vdz', u'volume_id': u'7'}, u'_context_auth_token':
'', u'_context_is_admin': True, u'_context_project_id':
u'be344db2784445da9415d19c2bb31ac1', u'_context_timestamp':
u'2012-05-14T20:13:15.966217', u'_context_user_id':
u'c081868089a34ca2a4a64f1af779b0c8', u'method': u'attach_volume',
u'_context_remote_address': u'127.0.0.1'} from (pid=22262) _safe_log
/usr/lib/python2.7/dist-packages/nova/rpc/common.py:160
2012-05-14 15:13:16 DEBUG nova.rpc.amqp
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] unpacked context: {'user_id':
u'c081868089a34ca2a4a64f1af779b0c8', 'roles': [u'Member', u'admin',
u'developer'], 'timestamp': '2012-05-14T20:13:15.966217', 'auth_token':
'', 'remote_address': u'127.0.0.1', 'is_admin': True, 'request_id':
u'req-ac084e00-207c-43d1-a856-f5c15e2fffc3', 'project_id':
u'be344db2784445da9415d19c2bb31ac1', 'read_deleted': u'no'} from (pid=22262)
_safe_log /usr/lib/python2.7/dist-packages/nova/rpc/common.py:160
2012-05-14 15:13:16 INFO nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] check_instance_lock: decorating: ||
2012-05-14 15:13:16 INFO nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] check_instance_lock: arguments:
||
||
|6c87ccb4-3bd9-4e5e-88e9-905af0c919f3|
2012-05-14 15:13:16 DEBUG nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] instance
6c87ccb4-3bd9-4e5e-88e9-905af0c919f3: getting locked state from (pid=22262)
get_lock /usr/lib/python2.7/dist-packages/nova/compute/manager.py:1597
2012-05-14 15:13:16 INFO nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] check_instance_lock: locked: |False|
2012-05-14 15:13:16 INFO nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] check_instance_lock: admin: |True|
2012-05-14 15:13:16 INFO nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] check_instance_lock: executing: ||
2012-05-14 15:13:16 AUDIT nova.compute.manager
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] [instance:
6c87ccb4-3bd9-4e5e-88e9-905af0c919f3] Attaching volume 7 to /dev/vdz
2012-05-14 15:13:16 DEBUG nova.rpc.amqp
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] Making asynchronous call on
volume.essexfe.momentumsoftware.com ... from (pid=22262) multicall
/usr/lib/python2.7/dist-packages/nova/rpc/amqp.py:321
2012-05-14 15:13:16 DEBUG nova.rpc.amqp
[req-ac084e00-207c-43d1-a856-f5c15e2fffc3 c081868089a34ca2a4a64f1af779b0c8
be344db2784445da9415d19c2bb31ac1] MSG_ID is 10794236679d45bcba5490301706d441
from (pid=22262) multicall /usr/lib/python2.7/dist-packages/nova/rpc/amqp.py:324
2012-05-14 15:13:17 DEBUG nova.utils [req-ac084e00-207c-43d1-a856-f5c15e2fffc3
c081868089a34ca2a4a64f1af779b0c8 be344db2784445da9415d19c2bb31ac1] Attempting
to grab semaphore "connect_volume" for method "connect_volume"... from
(pid=22262) inner /usr/lib/python2.7/dist-package
[Bug 912355] Re: euca-allocate-address is not acepting any parameters
** Changed in: openstack-manuals Status: Confirmed => Invalid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to euca2ools in Ubuntu. https://bugs.launchpad.net/bugs/912355 Title: euca-allocate-address is not acepting any parameters To manage notifications about this bug go to: https://bugs.launchpad.net/euca2ools/+bug/912355/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 985727] Re: krb5-admin-server falsely claiming clock skew errors
As I mentioned in the upstream bug tracker
(http://krbdev.mit.edu/rt/Ticket/Display.html?id=7118), I suspect this
is an entropy shortage issue. ("kadmind -W" should force the use of weak
random data)
** Bug watch added: krbdev.mit.edu/rt/ #7118
http://krbdev.mit.edu/rt/Ticket/Display.html?id=7118
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to krb5 in Ubuntu.
https://bugs.launchpad.net/bugs/985727
Title:
krb5-admin-server falsely claiming clock skew errors
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/krb5/+bug/985727/+subscriptions
--
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at:
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 855030] Re: Encountering sporadic AMQPChannelException
Could this be pushed to oneiric too Chuck? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/855030 Title: Encountering sporadic AMQPChannelException To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/855030/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 871278] Re: Cannot attach volumes to instances if tgt is used
I had to modify the original patch a little to to get it to work (set it to 1 instead of 0 for tgt): http://paste.ubuntu.com/876094/ For essex, I see driver.py has changed anyway and now has that fix in the iscsi.py helper script. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/871278 Title: Cannot attach volumes to instances if tgt is used To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/871278/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 871278] Re: Cannot attach volumes to instances if tgt is used
This is still occurring in oneiric with diablo, could someone spin a new pkg that isn't superseded by the 2011.3-0ubuntu6.2 security update? Thanks! -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/871278 Title: Cannot attach volumes to instances if tgt is used To manage notifications about this bug go to: https://bugs.launchpad.net/nova/+bug/871278/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 889423] Re: 802.3ad bonding not configured correctly
The updated vlan, bridge-utils and ifenslave packages from oneiric- proposed have fixed the issues I had with 802.3ad. Thanks! ** Tags removed: verification-needed ** Tags added: verification-done -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bridge-utils in Ubuntu. https://bugs.launchpad.net/bugs/889423 Title: 802.3ad bonding not configured correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/bridge-utils/+bug/889423/+subscriptions -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
