Re: [SlimDevices: Unix] Official display not working properly
In my case it is always the same part of the display (hardware) even if i rotate the orientation. patrick31698's Profile: http://forums.slimdevices.com/member.php?userid=67060 View this thread: http://forums.slimdevices.com/showthread.php?t=107681 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
I've recently discovered picoreplayer & love it. Many thanks to the team for this fantastic distro. :D I've had great success but noticed an issue when setting up a new board today - if I use a space in my wifi SSID in newconfig.cfg, the pi (zero W) will not connect. Watching the console shows the following: > ERROR FOR WIRELESS REQUEST "SET ESSID" (8B1A) : > TOO FEW ARGUMENTS. I made sure newconfig.cfg was encoded with unix line endings & also attempted to configure the wireless SSID using the console 'setup' utility (on a fresh image), but received the same error on reboot. In the end, I configured a wireless SSID on my network without a space & the pi connected first go. I then reconfigured via the web interface to the correct SSID and everything works. I was also curious to learn more about the audio patches in the audio optimized kernel, is it the suggested build now? :confused: willywonka's Profile: http://forums.slimdevices.com/member.php?userid=67212 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
Sorry I didn't see this but the Edimax EW-7811UTC AC600 is supported in pCP. I use this adapter. My router is an Netgear Nighthawk x4s r7800 whichi is AC2600 iperf3 results >From a rpi2B+ with the EW-7811UTC connected at 5Ghz ..iperf3 server is a hardwired intel GB adapter.Quad Core i7. Code: Connecting to host 192.168.0.141, port 5201 [ 4] local 192.168.0.27 port 54850 connected to 192.168.0.141 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 25.3 MBytes 212 Mbits/sec0485 KBytes [ 4] 1.00-2.00 sec 28.0 MBytes 234 Mbits/sec0592 KBytes [ 4] 2.00-3.00 sec 26.6 MBytes 223 Mbits/sec0592 KBytes [ 4] 3.00-4.00 sec 27.9 MBytes 234 Mbits/sec0624 KBytes [ 4] 4.00-5.00 sec 28.6 MBytes 240 Mbits/sec0624 KBytes [ 4] 5.00-6.00 sec 27.5 MBytes 230 Mbits/sec0624 KBytes [ 4] 6.00-7.00 sec 27.6 MBytes 232 Mbits/sec0624 KBytes [ 4] 7.00-8.00 sec 28.1 MBytes 235 Mbits/sec0649 KBytes [ 4] 8.00-9.00 sec 28.4 MBytes 237 Mbits/sec0718 KBytes [ 4] 9.00-10.00 sec 27.7 MBytes 233 Mbits/sec0718 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 275 MBytes 231 Mbits/sec0 sender [ 4] 0.00-10.00 sec 275 MBytes 230 Mbits/sec receiver This is the iperf data from the same rpi ethernet port. Code: Connecting to host 192.168.0.141, port 5201 [ 4] local 192.168.0.32 port 57312 connected to 192.168.0.141 port 5201 [ ID] Interval Transfer Bandwidth Retr Cwnd [ 4] 0.00-1.00 sec 11.3 MBytes 94.5 Mbits/sec0 26.9 KBytes [ 4] 1.00-2.00 sec 11.2 MBytes 94.2 Mbits/sec0 28.3 KBytes [ 4] 2.00-3.00 sec 11.2 MBytes 94.2 Mbits/sec0 28.3 KBytes [ 4] 3.00-4.00 sec 11.2 MBytes 94.3 Mbits/sec0 39.6 KBytes [ 4] 4.00-5.00 sec 11.2 MBytes 94.1 Mbits/sec0 39.6 KBytes [ 4] 5.00-6.00 sec 11.2 MBytes 94.1 Mbits/sec1 26.9 KBytes [ 4] 6.00-7.00 sec 11.2 MBytes 94.1 Mbits/sec0 26.9 KBytes [ 4] 7.00-8.00 sec 11.2 MBytes 94.0 Mbits/sec0 26.9 KBytes [ 4] 8.00-9.00 sec 11.2 MBytes 94.3 Mbits/sec0 41.0 KBytes [ 4] 9.00-10.00 sec 11.2 MBytes 94.2 Mbits/sec0 41.0 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bandwidth Retr [ 4] 0.00-10.00 sec 112 MBytes 94.2 Mbits/sec1 sender [ 4] 0.00-10.00 sec 112 MBytes 94.2 Mbits/sec receiver So at least in a quick short test the wifi stick has much more bandwidth than even the hard wired connection..I have seen similar results with using a hardwired USB Gigiabit adapter.This was with no other activity on the USB ports. Remember on a rpi3, all network (even hardwared) uses the onboard USB chipset. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Official display not working properly
This evening I power on my RaspBerry Display (Display+RPi+HiFiBerry Digi+) after one or two months of power off and I see the same problem of Patrick: some touch aren't recognized. Tomorrow I will try to check the cables but I think is not an hardware problem. Riccardo 1 SB v.1 (now unused), 1 SB Classic, broken :-(, 1 Duet, 3 Boom, some SOC (Odroid, RPi2, RpiZeroW) as player Logitech Media Server 7.9 on Odroid U3 RiccardoR's Profile: http://forums.slimdevices.com/member.php?userid=40 View this thread: http://forums.slimdevices.com/showthread.php?t=107681 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCoreplayer+Jivelite Sound Issue
As suggested I tried 3.21 and the behaviour it the very same as 3.20 I still need to force TurboMode to avoid drops at high bitrate. steff's Profile: http://forums.slimdevices.com/member.php?userid=66870 View this thread: http://forums.slimdevices.com/showthread.php?t=107463 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer + LMS + players sync = music stops after > 10s
TroLoo wrote: > Sure - all of them are wireless. But is shouldn't be an issue, my WiFi > is stable as rock for one thing, the other is that this error was > repeatable and also very expectable (15 seconds more or less and music > stops). As expected that will be the size of the initial fill of the player buffer. The problem is not LMS per-se as there is no difference in code executred by max2play and pcp - the differences must be elsewhere. Are the LMS settings different between max2play and pcp ? Network issues are still possible if for example drivers are different - have you checked whether the same drivers are being used for max2play and pcp ? bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=107767 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer + LMS + players sync = music stops after > 10s
I have 3 pCP Pi's in a sync group. I get a bit of drift but no drop outs. 2 of the Pi's have HAT DACs and the thirdhas a Touchscreen and USB DAC. I did try the third Pi as an LMS server but it was iffy. I put it down to the LAN on that Pi being affected by the USB DAC. The LAN and USB still share the same bus on a Pi3. It is after all hardware that costs 2/6 (who remembers that ?). I moved LMS to a dedicated pCP Pi3 and all is well. Almost. I do a lot of remote streaming via VPN but even after I realised I had to install lame I still get issues when I am streaming remotely. Tracks finishing a few sounds early and starting a few seconds in that sort of thing. *Pi3 with piCoreplayer music on QNAP TS419p via NFS* iThingys/iPeng/Tablets/Jogglers *Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s *Office* - Pi -> Sony TA FE320 -> Celestion F10s / Pi & SB3 -> Onkyo CRN 755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=107767 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer - As a LMS server (See how-to here - work in progress)???
Ronnie A tip for you. I am assuming you use Windows. Try Greenshot - open source - as an alternative screen grabbing tool. It is much better than Snipping Tool or plain old print screen. When you try it make sure you change "destination" in options or prefs to be the Image Editor. You will find that it has very powerful annotation tools for things like hiding passwords and drawing boxes and arrows. As always only download from the developers site and scan for viruses. *Pi3 with piCoreplayer music on QNAP TS419p via NFS* iThingys/iPeng/Tablets/Jogglers *Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s *Office* - Pi -> Sony TA FE320 -> Celestion F10s / Pi & SB3 -> Onkyo CRN 755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=107790 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer + LMS + players sync = music stops after > 10s
Jeff07971 wrote: > As bpa said: > Are any/all wired/wireless ? Sure - all of them are wireless. But is shouldn't be an issue, my WiFi is stable as rock for one thing, the other is that this error was repeatable and also very expectable (15 seconds more or less and music stops). >From other side - max2play was also wireless and no such problems. For now I've set up LMS server separately on my RPi2, didn't have too much time to test but it works fine for now (all players wireless, LMS also wireless). We'll see how it goes, I don't mind dedicating one device for LMS (seems like a waste of resources but if it saves my time on debugging - I'm fine with it). I'll let you know the result after using this setup for week or more. TroLoo's Profile: http://forums.slimdevices.com/member.php?userid=67040 View this thread: http://forums.slimdevices.com/showthread.php?t=107767 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer - As a LMS server (See how-to here - work in progress)???
romanempire wrote: > Hi all. > > despite searching and a lot of reading, I can't find anything > definitive (probably buried deep in a long thread :confused: ). > > So the steps would be:- > > 1.Download piCorePlayer, burn it to a SD-card. > 2.Insert the SD-card a LAN cable and apply power. > 3.Connect to management webpage. > 4.Optional - set static IP (from 'Main Page' in Beta mode). > 5.Optional - set host name (from 'Tweaks' page). > 6.Setup dedicated share on NAS > > > > 7.Install and Enable additional FileSystems (from 'LMS' page in > Advanced mode). I think this is required so LMS can use the NAS storage. > 8.Reboot. > 9.Setup Network Disk Mount (from 'LMS' page in Advanced mode). Use > 'CIFS' share type with relevant account details. 'Share Name' is > what you called the share when you created it on the NAS. > 'Mount Point' is how pCP refers to the resource? > Tick the 'Enabled' checkbox > > > *** This is where its not working. I keep getting a disk mount error > with the offer to reboot. *** > > > > > Paul Well, I'm not hurt at all http://forums.slimdevices.com/showthread.php?107755-A-simple-how-to-for-quot-Spotty-quot-and-pCP > Install and Enable additional FileSystems (from 'LMS' page in Advanced > mode). I think this is required so LMS can use the NAS storage. On my Qnap TS121 .ext4 is the default format, so this step is not required. > Setup Network Disk Mount (from 'LMS' page in Advanced mode). Use 'CIFS' > share type with relevant account details. Again, my default is NFS, so that is what I use. MOUNT POINT: Call this whatever you like, you will see in under ... IP ADDRESS: of the NAS obviously SHARE NAME: My music file on the nas is is called Squeezebox SHARE TYPE: NFS USERNAME AND PASSWORD: are for the NAS oviously tick the enable box and tick SET NET MOUNT. When mounted go to the LMS web gui Settings page>Basic Settings>Media Folders>Browse and the share name should be under "mnt" Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=107790 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
ralphy wrote: > Sounds like the Defeat destructive Touch-To-Play in player setting. > Have you recently upgraded from an older version of LMS as the default > behaviour was changed. > > Try changing the setting to Do not defeat in the webgui. Thanks for the suggestion Ralphy! ...but no go. I was previously running 7.7 of LMS due to bugs I had experienced in more recent community versions, but just updated to 7.91 to see if would help with this issue. Unfortunately setting player to Do Not Defeat (or any other destructive Touch-To-Play setting) did not make any difference; I tested settings by changing another item on the player page - Play Other Songs in Album - and yes, the PiCorePlayer responded to the change. It seems to me that the problem is related to the selected song holding touch focus during and after the confirmation "Song Added" dialogue box appears, so that a subsequent touch on the Now Playing button, while detected, does not refocus the touched area on the Now Playing button - but instead is interpreted as if the song selection was touched again. What also makes it fairly obvious this is occurring is when selecting the Now Playing button in the sequence described, the -song selection momentarily highlights -as if touched. I wonder why defeating destructive touch does not seem to be working? While it wouldn't fix the bug, it would at least keep my playlist intact. SteveLazer's Profile: http://forums.slimdevices.com/member.php?userid=67202 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Persistent network mount possible?
If it's working why worry any further. It could have been something as simple as a dodgy Ethernet cable which you have inadvertently fixed by swapping things around. It did sound like a networking issue. The first rule of networking is "check the cables". The second rule is also "check the cables" You'd be surprised how many times a loose cable has been the cause of a problem in my experience. *Pi3 with piCoreplayer music on QNAP TS419p via NFS* iThingys/iPeng/Tablets/Jogglers *Living Room* - Joggler & SB3 -> Onkyo TS606 - > Celestion Ditton F20s *Office* - Pi -> Sony TA FE320 -> Celestion F10s / Pi & SB3 -> Onkyo CRN 755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - SB Touch -> Topping TP21 -> AKG Headphones d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=107720 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] PiCorePlayer - As a LMS server (See how-to here - work in progress)???
Please take this as constructive criticism 3. How do you find the IP address? There are lots of ways. Many that don't require a monitor. 4. For a Server it should always be a static (or reserved) IP and it should always be wired. Ok it will work with a dhcp address and sometimes it will work wirelessly but neither is advised or indeed good practise. 9. Possible fix. Mounting a NAS folder (Linux) requires exactly the right syntax e.g Music is not the same as music in Linux terms. d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=107790 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
ralphy wrote: > Upon further investigations, I found that those 2 files don't have all > their mp4 atoms at the beginning of the file. > > The specific ffmpeg library error is 'moov atom not found' > > This has always been the case with alac and aac files and Triode talked > about it many times first when he added those decoders to squeezelite. > > When that's the case, squeezelite can't play the file, it needs to find > the moov atom before the audio stream. > > The alac files convert to wav using ffmpeg -i file.m4a file.wav as > ffmpeg can seek to the end of the file to read the atoms and then seek > back to the audio stream. > > I've encounter this before and fixed it using the mp4file program from > 'mp4v2 2.0.0' > (https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/mp4v2/mp4v2-2.0.0.tar.bz2) > > The files play fine after running > > mp4file --optimize filename.m4a > > I can upload the "fixed" files, however you're likely to run into this > problem again in the future and I'd suggest installing mp4v2 2.0+ or > build it from source. Thank you Ralph for you efforts ! I'll try the mp4v2 thing. Also to be completely honest, these two files where converted from flac to alac by foobar (I use itunes to manage my music library and itunes does not support flac). So I guess foobar has a flawed alac converter? 'Cambridge Audio 851D-S' (https://www.cambridgeaudio.com/products/851/851d) -> 'Focal MP1200' (http://www.mp1200.co.nf/) -> 'Focal Electra 1028 Be' (http://www.focal.com/en/electra-1000-be-2/209-electra-1028-be-3544053695099.html) 1 x SB Boom, 1 x SB Radio, 1 x SB Touch and 2 x RPI 2B 1 x SB3 and 1 x SB Touch in storage ReadyNAS NVX running LMS 7.9.0. iPeng on iPhone, SqueezePad & iPeng on iPad. http://www.last.fm/user/phibon Pascal Hibon's Profile: http://forums.slimdevices.com/member.php?userid=7969 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Persistent network mount possible?
9 days so far, share still connected. Will add the last PcP with another internet stream. So LMS is now controlling 6 player's with all different internet stream's. Let's see. *SqueezeBoxes:* 2x SB2 (Living room and study), 1x Radio (Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch (Bedroom) *Server:* LMS1 7.7.3 on windows, LMS2 7.9.1. on PcP 3.20 *Network:* AVM Fritzbox, D-Link Smart Switch 24p, 3x Ubiquity edwin2006's Profile: http://forums.slimdevices.com/member.php?userid=66926 View this thread: http://forums.slimdevices.com/showthread.php?t=107720 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
Pascal Hibon wrote: > Hi Ralphy, > > Since I only found two files who won't play, I prefer option 3. > I have send you a PM. Upon further investigations, I found that those 2 files don't have all their mp4 atoms at the beginning of the file. The specific ffmpeg library error is 'moov atom not found' This has always been the case with alac and aac files and Triode talked about it many times first when he added those decoders to squeezelite. When that's the case, squeezelite can't play the file, it needs to find the moov atom before the audio stream. The alac files convert to wav using ffmpeg -i file.m4a file.wav as ffmpeg can seek to the end of the file to read the atoms and then seek back to the audio stream. I've encounter this before and fixed it using the mp4file program from 'mp4v2 2.0.0' (https://storage.googleapis.com/google-code-archive-downloads/v2/code.google.com/mp4v2/mp4v2-2.0.0.tar.bz2) The files play fine after running mp4file --optimize filename.m4a I can upload the "fixed" files, however you're likely to run into this problem again in the future and I'd suggest installing mp4v2 2.0+ or build it from source. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeezeplay and Linux Mint 18.2 - streams drops, program crashes
Hello Ralphy. Many thanks again for your response. I have removed the package as per your instructions and then reinstalled. Regrettably it would appear that the Pulse package is not compatable with Mint as it failed to run as shown by console output at the foot of this post. Building from source is beyond my Linux technical capabilities at present. More worryingly I appear to have lost sound output on my box - local music files whilst apparently running in the default music player produce no sound Obviously I have messed up somewhere along the way. Anyway that's not your concern - thanks for your help in getting me this far. Cheers Alan # Console Output ## casper@ghost ~/Downloads/PulseAudio $ sudo dpkg -i squeezeplay-pulse_7.8.0~996_amd64.deb Selecting previously unselected package squeezeplay. (Reading database ... 205233 files and directories currently installed.) Preparing to unpack squeezeplay-pulse_7.8.0~996_amd64.deb .. . Unpacking squeezeplay (7.8.0~996) ... Setting up squeezeplay (7.8.0~996) ... casper@ghost ~/Downloads/PulseAudio $ /opt/squeezeplay/bin/squeezeplay.sh jive: src/common/pa_front.c:235: InitializeHostApis: Assertion `hostApi->info.defaultInputDevice < hostApi->info.deviceCount' failed. /opt/squeezeplay/bin/squeezeplay.sh: line 58: 3240 Aborted ./jive casper@ghost ~/Downloads/PulseAudio $ farrina's Profile: http://forums.slimdevices.com/member.php?userid=65601 View this thread: http://forums.slimdevices.com/showthread.php?t=107770 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
epoch1970 wrote: > Not sure this is specifically related to PCP but here goes. > > I'm running a PCP player and an LMS server within a VLAN. > There is nothing else (well 2 mostly inactive :) desktops) on that > network. > Player boot is ok, not very fast (~1.6MB mydata.tgz). The player doesn't > know it belongs to a VLAN, this is set in the switch (a MAC Vlan, BTW) > The LMS server has a DHCP server, it handles the expected IP address. In > the LMS server machine the ARP table is correct. There are 2 interfaces > on the server, one is a bridge (tied to the VLAN), the other is a simple > physical interface. LMS listens to both interfaces, but the non VLAN one > is filtered. > > When PCP boots, squeezelite reports or LMS registers a nil player ID. If > I restart squeezelite the hardware MAC address is correctly acquired by > LMS. > If I use the -m option in squeezelite, the MAC address is correctly > acquired by LMS. > > Any idea where to look in order to debug this? > Thanks in advance. This happens when no network interfaces are available when squeezelite starts. Here's the code the initially sets the mac address to all zeros just before "probing the nics" with sockets. https://github.com/ralph-irving/squeezelite/blob/master/utils.c#L141 Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Jivelite for piCorePlayer
SteveLazer wrote: > Wanted to report a bug that I believe is in Jivelite. When you long > press on a music selection, and then select Play Next or Add to End on > the popup menu, a confirmation dialogue confirming it was added to the > playlist appears. If you then select the Now Playing button (upper right > arrow button) before the dialogue times out and disappears, instead of > going to the Now Playing screen, the last music selection highlights and > Jivelite treats your selection as a "Play" wiping out your current > playlist. > > If you wait for the dialogue to disappear and select the Now Playing > button, there is no action at all on the first tap, and requires an > additional press to go to Now Playing. Sounds like the Defeat destructive Touch-To-Play in player setting. Have you recently upgraded from an older version of LMS as the default behaviour was changed. Try changing the setting to Do not defeat in the webgui. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=103330 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Squeezeplay and Linux Mint 18.2 - streams drops, program crashes
Unfortunately, those additional instructions on the download page are for the standard alsa version and an not required for the pulseaudio version. Start by removing squeezplay sudo apt-get purge squeezeplay cd /opt sudo rm -rf squeezeplay The rm command may fail and that's okay. Revert any changes you made to ld.config and well as any other files you might have changed trying to get the alsa version to work then reboot. Reinstall sudo dpkg -i squeezeplay-pulse_7.8.0~996_amd64.deb Then open a terminal and run /opt/squeezeplay/bin/squeezeplay.sh Do not prefix with sudo. Do you still have the same problem? If yes, then it's likely that the debian 8 build doesn't work with mint and you'll need to build from source. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=107770 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Picoreplayer + Jivelite loses screensavers on power cycle
Thank you. All good now. tkr001's Profile: http://forums.slimdevices.com/member.php?userid=23180 View this thread: http://forums.slimdevices.com/showthread.php?t=107784 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
