Re: Can not connect with cqlsh to something different than localhost
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM
to localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers', {'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
Two things:
1. Try telnet 192.168.111.136 9042 and see if it connects?
2. check for hostname in /etc/hosts, if it is mapped correctly.
-Vivek
On Mon, Dec 8, 2014 at 4:19 PM, Richard Snowden richard.t.snow...@gmail.com
wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM to
localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers', {'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
Listen address needs the actual address, not the interface. This is best
accomplished by setting up proper hostnames for each machine (through DNS
or hosts file) and leaving listen_address blank, as it will pick the
external ip. Otherwise, you'll need to set the listen address to the IP of
the machine you want on each machine. I find the former to be less of a
pain to manage.
On Mon Dec 08 2014 at 2:49:55 AM Richard Snowden
richard.t.snow...@gmail.com wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM to
localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers', {'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
I left listen_address blank - still I can't connect (connection refused).
cqlsh - OK
cqlsh ubuntu - fail (ubuntu is my hostname)
cqlsh 192.168.111.136 - fail
telnet 192.168.111.136 9042 from outside the VM gives me a connection
refused.
I just started a Tomcat in my VM and did a telnet 192.168.111.136 8080
from outside the VM - and got the expected result (Connected to
192.168.111.136. Escape character is '^]'.
So what's so special in Cassandra?
On Mon, Dec 8, 2014 at 12:18 PM, Jonathan Haddad j...@jonhaddad.com wrote:
Listen address needs the actual address, not the interface. This is best
accomplished by setting up proper hostnames for each machine (through DNS
or hosts file) and leaving listen_address blank, as it will pick the
external ip. Otherwise, you'll need to set the listen address to the IP of
the machine you want on each machine. I find the former to be less of a
pain to manage.
On Mon Dec 08 2014 at 2:49:55 AM Richard Snowden
richard.t.snow...@gmail.com wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM to
localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers',
{'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
The difference is what interface your service is listening on. What is the
output of
$ netstat -ntl | grep 9042
On Mon, 8 Dec 2014 07:21 Richard Snowden richard.t.snow...@gmail.com
wrote:
I left listen_address blank - still I can't connect (connection refused).
cqlsh - OK
cqlsh ubuntu - fail (ubuntu is my hostname)
cqlsh 192.168.111.136 - fail
telnet 192.168.111.136 9042 from outside the VM gives me a connection
refused.
I just started a Tomcat in my VM and did a telnet 192.168.111.136 8080
from outside the VM - and got the expected result (Connected to
192.168.111.136. Escape character is '^]'.
So what's so special in Cassandra?
On Mon, Dec 8, 2014 at 12:18 PM, Jonathan Haddad j...@jonhaddad.com
wrote:
Listen address needs the actual address, not the interface. This is best
accomplished by setting up proper hostnames for each machine (through DNS
or hosts file) and leaving listen_address blank, as it will pick the
external ip. Otherwise, you'll need to set the listen address to the IP of
the machine you want on each machine. I find the former to be less of a
pain to manage.
On Mon Dec 08 2014 at 2:49:55 AM Richard Snowden
richard.t.snow...@gmail.com wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM to
localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection
refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers',
{'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
rpc_address (or rpc_interface) is used for client connections,
listen_address is for inter-node communication.
On 8 December 2014 at 19:21, Richard Snowden richard.t.snow...@gmail.com
wrote:
$ netstat -ntl | grep 9042
tcp6 0 0 127.0.0.1:9042 :::*
LISTEN
(listen_address not set in cassandra.yaml)
Even with listen_address: 192.168.111.136 I get:
$ netstat -ntl | grep 9042
tcp6 0 0 127.0.0.1:9042 :::*
LISTEN
All I want to do is to access Cassandra from outside my VM. Is this really
that hard?
On Mon, Dec 8, 2014 at 7:30 PM, Michael Dykman mdyk...@gmail.com wrote:
The difference is what interface your service is listening on. What is
the output of
$ netstat -ntl | grep 9042
On Mon, 8 Dec 2014 07:21 Richard Snowden richard.t.snow...@gmail.com
wrote:
I left listen_address blank - still I can't connect (connection refused).
cqlsh - OK
cqlsh ubuntu - fail (ubuntu is my hostname)
cqlsh 192.168.111.136 - fail
telnet 192.168.111.136 9042 from outside the VM gives me a connection
refused.
I just started a Tomcat in my VM and did a telnet 192.168.111.136 8080
from outside the VM - and got the expected result (Connected to
192.168.111.136. Escape character is '^]'.
So what's so special in Cassandra?
On Mon, Dec 8, 2014 at 12:18 PM, Jonathan Haddad j...@jonhaddad.com
wrote:
Listen address needs the actual address, not the interface. This is
best accomplished by setting up proper hostnames for each machine (through
DNS or hosts file) and leaving listen_address blank, as it will pick the
external ip. Otherwise, you'll need to set the listen address to the IP of
the machine you want on each machine. I find the former to be less of a
pain to manage.
On Mon Dec 08 2014 at 2:49:55 AM Richard Snowden
richard.t.snow...@gmail.com wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM to
localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need
to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection
refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers',
{'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last
error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
Ah! That did the trick!
Thanks Sam!
On Mon, Dec 8, 2014 at 8:49 PM, Sam Tunnicliffe s...@beobal.com wrote:
rpc_address (or rpc_interface) is used for client connections,
listen_address is for inter-node communication.
On 8 December 2014 at 19:21, Richard Snowden richard.t.snow...@gmail.com
wrote:
$ netstat -ntl | grep 9042
tcp6 0 0 127.0.0.1:9042 :::*
LISTEN
(listen_address not set in cassandra.yaml)
Even with listen_address: 192.168.111.136 I get:
$ netstat -ntl | grep 9042
tcp6 0 0 127.0.0.1:9042 :::*
LISTEN
All I want to do is to access Cassandra from outside my VM. Is this
really that hard?
On Mon, Dec 8, 2014 at 7:30 PM, Michael Dykman mdyk...@gmail.com wrote:
The difference is what interface your service is listening on. What is
the output of
$ netstat -ntl | grep 9042
On Mon, 8 Dec 2014 07:21 Richard Snowden richard.t.snow...@gmail.com
wrote:
I left listen_address blank - still I can't connect (connection
refused).
cqlsh - OK
cqlsh ubuntu - fail (ubuntu is my hostname)
cqlsh 192.168.111.136 - fail
telnet 192.168.111.136 9042 from outside the VM gives me a
connection refused.
I just started a Tomcat in my VM and did a telnet 192.168.111.136
8080 from outside the VM - and got the expected result (Connected to
192.168.111.136. Escape character is '^]'.
So what's so special in Cassandra?
On Mon, Dec 8, 2014 at 12:18 PM, Jonathan Haddad j...@jonhaddad.com
wrote:
Listen address needs the actual address, not the interface. This is
best accomplished by setting up proper hostnames for each machine (through
DNS or hosts file) and leaving listen_address blank, as it will pick the
external ip. Otherwise, you'll need to set the listen address to the IP
of
the machine you want on each machine. I find the former to be less of a
pain to manage.
On Mon Dec 08 2014 at 2:49:55 AM Richard Snowden
richard.t.snow...@gmail.com wrote:
This did not work either. I changed /etc/cassandra.yaml and restarted
Cassandra (I even restarted the machine to make 100% sure).
What I tried:
1) listen_address: localhost
- connection OK (but of course I can't connect from outside the VM
to localhost)
2) Set listen_interface: eth0
- connection refused
3) Set listen_address: 192.168.111.136
- connection refused
What to do?
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely
need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection
refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers',
{'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last
error:
Connection refused)})
What to do?
Can not connect with cqlsh to something different than localhost
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers', {'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
Re: Can not connect with cqlsh to something different than localhost
Try:
$ netstat -lnt
and see which interface port 9042 is listening on. You will likely need to
update cassandra.yaml to change the interface. By default, Cassandra is
listening on localhost so your local cqlsh session works.
On Sun, 7 Dec 2014 23:44 Richard Snowden richard.t.snow...@gmail.com
wrote:
I am running Cassandra 2.1.2 in an Ubuntu VM.
cqlsh or cqlsh localhost works fine.
But I can not connect from outside the VM (firewall, etc. disabled).
Even when I do cqlsh 192.168.111.136 in my VM I get connection refused.
This is strange because when I check my network config I can see that
192.168.111.136 is my IP:
root@ubuntu:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:02:e0:de
inet addr:192.168.111.136 Bcast:192.168.111.255
Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fe02:e0de/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16042 errors:0 dropped:0 overruns:0 frame:0
TX packets:8638 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:21307125 (21.3 MB) TX bytes:709471 (709.4 KB)
loLink encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:550 errors:0 dropped:0 overruns:0 frame:0
TX packets:550 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:148053 (148.0 KB) TX bytes:148053 (148.0 KB)
root@ubuntu:~# cqlsh 192.168.111.136 9042
Connection error: ('Unable to connect to any servers', {'192.168.111.136':
error(111, Tried connecting to [('192.168.111.136', 9042)]. Last error:
Connection refused)})
What to do?
