Re: Failure to build (possibly a 3rd party issue)
I made a mistake there. After the next release (0.22) then support for GCC 4.4 will be dropped. 0.21 and 0.22 should be compatible with GCC 4.4 - 4.9 (Excluding gcc 4.7, although hopefully that will be resolved before 0.22). On all these compilers we compile with C++11 support. Different code paths using more of C++11 are enabled when gcc 4.8+ is used. On Sat, Dec 27, 2014 at 10:11 AM, Cody Maloney c...@mesosphere.io wrote: Actually back to GCC 4.4 is going to be supported for Mesos 0.21. Post 0.21 the plan is currently GCC 4.6 at a minimum, 4.7 if we can get that working well (There are some issues in how Future is currently implemented), so that a Debian Wheezy stable compiler will work. On Sat, Dec 27, 2014 at 12:09 AM, Tomas Barton barton.to...@gmail.com wrote: Hi, Mesos = 0.21 requires GCC = 4.8 for building https://issues.apache.org/jira/browse/MESOS-1044 Tomas On 18 December 2014 at 07:38, Ritwik ritwik.ya...@gmail.com wrote: Thanks Michael for your reply. *I was able to resolve the issue by upgrading from GCC 4.6 to GCC 4.8* It seems to work perfectly now, however, not knowing what caused the problem might prove to be bad in the long run. Thanks again for all the help. On 18 December 2014 at 01:40, Michael Park mcyp...@gmail.com wrote: Hi Ritwik, I've seen this problem before but haven't had time to look into it. We made C++11 a requirement so the Makefile actually isn't the issue here. I can look into it though, Thanks for bringing it up! MPark On 17 December 2014 at 07:44, Ritwik ritwik.ya...@gmail.com wrote: I dug around the error message a bit. I see the compilation being done using: -std=c++0x The error message seems to be related to creating rvalue references which is a new feature of C++11. Does the make file need an update? On 17 December 2014 at 15:42, Ritwik ritwik.ya...@gmail.com wrote: Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav* -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik
Re: Failure to build (possibly a 3rd party issue)
Hi, Mesos = 0.21 requires GCC = 4.8 for building https://issues.apache.org/jira/browse/MESOS-1044 Tomas On 18 December 2014 at 07:38, Ritwik ritwik.ya...@gmail.com wrote: Thanks Michael for your reply. *I was able to resolve the issue by upgrading from GCC 4.6 to GCC 4.8* It seems to work perfectly now, however, not knowing what caused the problem might prove to be bad in the long run. Thanks again for all the help. On 18 December 2014 at 01:40, Michael Park mcyp...@gmail.com wrote: Hi Ritwik, I've seen this problem before but haven't had time to look into it. We made C++11 a requirement so the Makefile actually isn't the issue here. I can look into it though, Thanks for bringing it up! MPark On 17 December 2014 at 07:44, Ritwik ritwik.ya...@gmail.com wrote: I dug around the error message a bit. I see the compilation being done using: -std=c++0x The error message seems to be related to creating rvalue references which is a new feature of C++11. Does the make file need an update? On 17 December 2014 at 15:42, Ritwik ritwik.ya...@gmail.com wrote: Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav* -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik
Re: Failure to build (possibly a 3rd party issue)
Actually back to GCC 4.4 is going to be supported for Mesos 0.21. Post 0.21 the plan is currently GCC 4.6 at a minimum, 4.7 if we can get that working well (There are some issues in how Future is currently implemented), so that a Debian Wheezy stable compiler will work. On Sat, Dec 27, 2014 at 12:09 AM, Tomas Barton barton.to...@gmail.com wrote: Hi, Mesos = 0.21 requires GCC = 4.8 for building https://issues.apache.org/jira/browse/MESOS-1044 Tomas On 18 December 2014 at 07:38, Ritwik ritwik.ya...@gmail.com wrote: Thanks Michael for your reply. *I was able to resolve the issue by upgrading from GCC 4.6 to GCC 4.8* It seems to work perfectly now, however, not knowing what caused the problem might prove to be bad in the long run. Thanks again for all the help. On 18 December 2014 at 01:40, Michael Park mcyp...@gmail.com wrote: Hi Ritwik, I've seen this problem before but haven't had time to look into it. We made C++11 a requirement so the Makefile actually isn't the issue here. I can look into it though, Thanks for bringing it up! MPark On 17 December 2014 at 07:44, Ritwik ritwik.ya...@gmail.com wrote: I dug around the error message a bit. I see the compilation being done using: -std=c++0x The error message seems to be related to creating rvalue references which is a new feature of C++11. Does the make file need an update? On 17 December 2014 at 15:42, Ritwik ritwik.ya...@gmail.com wrote: Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav* -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik
Failure to build (possibly a 3rd party issue)
Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav*
Re: Failure to build (possibly a 3rd party issue)
I dug around the error message a bit. I see the compilation being done using: -std=c++0x The error message seems to be related to creating rvalue references which is a new feature of C++11. Does the make file need an update? On 17 December 2014 at 15:42, Ritwik ritwik.ya...@gmail.com wrote: Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav* -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik
Re: Failure to build (possibly a 3rd party issue)
Thanks Michael for your reply. *I was able to resolve the issue by upgrading from GCC 4.6 to GCC 4.8* It seems to work perfectly now, however, not knowing what caused the problem might prove to be bad in the long run. Thanks again for all the help. On 18 December 2014 at 01:40, Michael Park mcyp...@gmail.com wrote: Hi Ritwik, I've seen this problem before but haven't had time to look into it. We made C++11 a requirement so the Makefile actually isn't the issue here. I can look into it though, Thanks for bringing it up! MPark On 17 December 2014 at 07:44, Ritwik ritwik.ya...@gmail.com wrote: I dug around the error message a bit. I see the compilation being done using: -std=c++0x The error message seems to be related to creating rvalue references which is a new feature of C++11. Does the make file need an update? On 17 December 2014 at 15:42, Ritwik ritwik.ya...@gmail.com wrote: Hi, I was trying to build Mesos using 'make'. Here is what I got: http://code.stypi.com/pw3146dx Is this a known issue? It would be great if someone could suggest a workaround. Thanks. Best Regards, -- *Ritwik Yadav* -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik -- *Ritwik Yadav* Department of Computer Science and Engineering, Indian Institute of Technology, Kharagpur. Cell: +91-9635-152346 Twitter: @iRitwik https://twitter.com/#%21/iRitwik
