RE: cannot mount disk with hammer file system
Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot From: users-err...@crater.dragonflybsd.org [mailto:users-err...@crater.dragonflybsd.org] On Behalf Of Úlfar Ellenarson Sent: Tuesday, February 22, 2011 12:35 PM To: users@crater.dragonflybsd.org Subject: cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. kær kveðju/kind regards, Úlfar Ellenarson SAP ráðgjafi / SAP Consultant [cid:image001.jpg@01CBD350.3E0599F0] Borgartúni 37 105 Reykjavík, Ísland T: +354 563 6226 E: u...@applicon.ismailto:h...@applicon.is W: www.applicon.ishttp://www.applicon.is/ inline: image001.jpg
Re: cannot mount disk with hammer file system
Hi Úlfar, Boot the livecd and mount the disk where DFly is installed in, then provide this: - Do a 'ls -l /dev/serno' - fstab of the installed system (not the LiveCD) - loader.conf from the installed system (it should be in the boot directory) Thanks, Antonio Huete 2011/2/23 Úlfar Ellenarson u...@applicon.is Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot *From:* users-err...@crater.dragonflybsd.org [mailto: users-err...@crater.dragonflybsd.org] *On Behalf Of *Úlfar Ellenarson *Sent:* Tuesday, February 22, 2011 12:35 PM *To:* users@crater.dragonflybsd.org *Subject:* cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. *kær kveðju/kind regards,* * * *Úlfar Ellenarson* SAP ráðgjafi / SAP Consultant [image: cid:image001.jpg@01CAE862.EFF59A90] Borgartúni 37 105 Reykjavík, Ísland *T: *+354 563 6226 *E: * u...@applicon.is h...@applicon.is *W:* www.applicon.is image001.jpg
RE: cannot mount disk with hammer file system
HI Antonio. Thank you for your posts and help. I have taken a screenshot of the mounted etc/fstab or better said /mnt/etc/fstab and I have also ls -l /mnt/dev/serno. The only thing is I have not looked into the loader.conf which I reckon is mostly likely either in /boot or /etc. I think the problem is that dragonflybsd is not creating the devices upon boot because I have moved the system from vmware workstation 6.5 to virtualbox 4.04. I have looked into the man 8 boot page, however there is considerably less information about dragonfly bsd on the web than linux. I have converted linux physical machines using rsync, cpio, and netcat to vmware, but I have little experience with dragonfly. Kind regards, Úlfar Ellenson From: Antonio Huete Jimenez [mailto:ahuete.de...@gmail.com] Sent: Wednesday, February 23, 2011 12:14 PM To: Úlfar Ellenarson Cc: users@crater.dragonflybsd.org Subject: Re: cannot mount disk with hammer file system Hi Úlfar, Boot the livecd and mount the disk where DFly is installed in, then provide this: - Do a 'ls -l /dev/serno' - fstab of the installed system (not the LiveCD) - loader.conf from the installed system (it should be in the boot directory) Thanks, Antonio Huete 2011/2/23 Úlfar Ellenarson u...@applicon.ismailto:u...@applicon.is Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot From: users-err...@crater.dragonflybsd.orgmailto:users-err...@crater.dragonflybsd.org [mailto:users-err...@crater.dragonflybsd.orgmailto:users-err...@crater.dragonflybsd.org] On Behalf Of Úlfar Ellenarson Sent: Tuesday, February 22, 2011 12:35 PM To: users@crater.dragonflybsd.orgmailto:users@crater.dragonflybsd.org Subject: cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. kær kveðju/kind regards, Úlfar Ellenarson SAP ráðgjafi / SAP Consultant [cid:image001.jpg@01CBD354.CA06FBC0] Borgartúni 37 105 Reykjavík, Ísland T: +354 563 6226 E: u...@applicon.ismailto:h...@applicon.is W: www.applicon.ishttp://www.applicon.is/ inline: image001.jpg
Re: cannot mount disk with hammer file system
The issue boils down to VirtualBox not having the same serial numbers for disks as vmware does. You should be able to figure out which one the right one is by listing the da* and ad* devices in /dev from a live CD. Alternatively, if VirtualBox supports disk serial numbers, doing ls /dev/serno will yield the information, as others have told you. By the way, if you have attached screenshots, they definitely haven't arrived here Can you please repost them somehow, possibly on imageshack or so and providing a link? Kind Regards, Alex Hornung On 23 February 2011 12:27, Úlfar Ellenarson u...@applicon.is wrote: HI Antonio. Thank you for your posts and help. I have taken a screenshot of the mounted etc/fstab or better said /mnt/etc/fstab and I have also ls –l /mnt/dev/serno. The only thing is I have not looked into the loader.conf which I reckon is mostly likely either in /boot or /etc. I think the problem is that dragonflybsd is not creating the devices upon boot because I have moved the system from vmware workstation 6.5 to virtualbox 4.04. I have looked into the man 8 boot page, however there is considerably less information about dragonfly bsd on the web than linux. I have converted linux physical machines using rsync, cpio, and netcat to vmware, but I have little experience with dragonfly. Kind regards, Úlfar Ellenson *From:* Antonio Huete Jimenez [mailto:ahuete.de...@gmail.com] *Sent:* Wednesday, February 23, 2011 12:14 PM *To:* Úlfar Ellenarson *Cc:* users@crater.dragonflybsd.org *Subject:* Re: cannot mount disk with hammer file system Hi Úlfar, Boot the livecd and mount the disk where DFly is installed in, then provide this: - Do a 'ls -l /dev/serno' - fstab of the installed system (not the LiveCD) - loader.conf from the installed system (it should be in the boot directory) Thanks, Antonio Huete 2011/2/23 Úlfar Ellenarson u...@applicon.is Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot *From:* users-err...@crater.dragonflybsd.org [mailto: users-err...@crater.dragonflybsd.org] *On Behalf Of *Úlfar Ellenarson *Sent:* Tuesday, February 22, 2011 12:35 PM *To:* users@crater.dragonflybsd.org *Subject:* cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. *kær kveðju/kind regards,* * * *Úlfar Ellenarson* SAP ráðgjafi / SAP Consultant [image: cid:image001.jpg@01CAE862.EFF59A90] Borgartúni 37 105 Reykjavík, Ísland *T: *+354 563 6226 *E: * u...@applicon.is h...@applicon.is *W:* www.applicon.is image001.jpg
RE: cannot mount disk with hammer file system
Thanks Alex. I will definitely add the screenshots. However, being at work now I will not be able to post them until later today. I have not used imageshack before, but I reckon it can not be too difficult to use. I do not know if VirtualBox supports disk serial numbers, but I will mark that down as things to do today. From: Alex Hornung [mailto:ahorn...@gmail.com] Sent: Wednesday, February 23, 2011 1:45 PM To: Úlfar Ellenarson Cc: users@crater.dragonflybsd.org Subject: Re: cannot mount disk with hammer file system The issue boils down to VirtualBox not having the same serial numbers for disks as vmware does. You should be able to figure out which one the right one is by listing the da* and ad* devices in /dev from a live CD. Alternatively, if VirtualBox supports disk serial numbers, doing ls /dev/serno will yield the information, as others have told you. By the way, if you have attached screenshots, they definitely haven't arrived here Can you please repost them somehow, possibly on imageshack or so and providing a link? Kind Regards, Alex Hornung On 23 February 2011 12:27, Úlfar Ellenarson u...@applicon.ismailto:u...@applicon.is wrote: HI Antonio. Thank you for your posts and help. I have taken a screenshot of the mounted etc/fstab or better said /mnt/etc/fstab and I have also ls -l /mnt/dev/serno. The only thing is I have not looked into the loader.conf which I reckon is mostly likely either in /boot or /etc. I think the problem is that dragonflybsd is not creating the devices upon boot because I have moved the system from vmware workstation 6.5 to virtualbox 4.04. I have looked into the man 8 boot page, however there is considerably less information about dragonfly bsd on the web than linux. I have converted linux physical machines using rsync, cpio, and netcat to vmware, but I have little experience with dragonfly. Kind regards, Úlfar Ellenson From: Antonio Huete Jimenez [mailto:ahuete.de...@gmail.commailto:ahuete.de...@gmail.com] Sent: Wednesday, February 23, 2011 12:14 PM To: Úlfar Ellenarson Cc: users@crater.dragonflybsd.orgmailto:users@crater.dragonflybsd.org Subject: Re: cannot mount disk with hammer file system Hi Úlfar, Boot the livecd and mount the disk where DFly is installed in, then provide this: - Do a 'ls -l /dev/serno' - fstab of the installed system (not the LiveCD) - loader.conf from the installed system (it should be in the boot directory) Thanks, Antonio Huete 2011/2/23 Úlfar Ellenarson u...@applicon.ismailto:u...@applicon.is Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot From: users-err...@crater.dragonflybsd.orgmailto:users-err...@crater.dragonflybsd.org [mailto:users-err...@crater.dragonflybsd.orgmailto:users-err...@crater.dragonflybsd.org] On Behalf Of Úlfar Ellenarson Sent: Tuesday, February 22, 2011 12:35 PM To: users@crater.dragonflybsd.orgmailto:users@crater.dragonflybsd.org Subject: cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. kær kveðju/kind regards, Úlfar Ellenarson SAP ráðgjafi / SAP Consultant [cid:image001.jpg@01CBD360.476B8120] Borgartúni 37 105 Reykjavík, Ísland T: +354 563 6226 E: u...@applicon.ismailto:h...@applicon.is W: www.applicon.ishttp://www.applicon.is/ inline: image001.jpg
Re: SV: cannot mount disk with hammer file system
Thanks, but serno.jpg is missing the most important bit; the window had a scrollbar and the last bit of every line was cut. Can you please resend without the scrollbar? Regards, Alex On 23/02/11 21:31, Úlfar Ellenarson wrote: Hi Alex. Here is a screenshot of /mnt/boot/loader.conf/mnt/dev/serno/mnt/dev/ad1s* and /mnt/etc/fstab sent as an attachment. *Frá:* Alex Hornung [ahorn...@gmail.com] *Sent:* 23. febrúar 2011 13:44 *Viðtakandi:* Úlfar Ellenarson *Afrit:* users@crater.dragonflybsd.org *Efni:* Re: cannot mount disk with hammer file system The issue boils down to VirtualBox not having the same serial numbers for disks as vmware does. You should be able to figure out which one the right one is by listing the da* and ad* devices in /dev from a live CD. Alternatively, if VirtualBox supports disk serial numbers, doing ls /dev/serno will yield the information, as others have told you. By the way, if you have attached screenshots, they definitely haven't arrived here Can you please repost them somehow, possibly on imageshack or so and providing a link? Kind Regards, Alex Hornung On 23 February 2011 12:27, Úlfar Ellenarson u...@applicon.is mailto:u...@applicon.is wrote: HI Antonio. Thank you for your posts and help. I have taken a screenshot of the mounted etc/fstab or better said /mnt/etc/fstab and I have also ls –l /mnt/dev/serno. The only thing is I have not looked into the loader.conf which I reckon is mostly likely either in /boot or /etc. I think the problem is that dragonflybsd is not creating the devices upon boot because I have moved the system from vmware workstation 6.5 to virtualbox 4.04. I have looked into the man 8 boot page, however there is considerably less information about dragonfly bsd on the web than linux. I have converted linux physical machines using rsync, cpio, and netcat to vmware, but I have little experience with dragonfly. Kind regards, Úlfar Ellenson *From:*Antonio Huete Jimenez [mailto:ahuete.de...@gmail.com mailto:ahuete.de...@gmail.com] *Sent:* Wednesday, February 23, 2011 12:14 PM *To:* Úlfar Ellenarson *Cc:* users@crater.dragonflybsd.org mailto:users@crater.dragonflybsd.org *Subject:* Re: cannot mount disk with hammer file system Hi Úlfar, Boot the livecd and mount the disk where DFly is installed in, then provide this: - Do a 'ls -l /dev/serno' - fstab of the installed system (not the LiveCD) - loader.conf from the installed system (it should be in the boot directory) Thanks, Antonio Huete 2011/2/23 Úlfar Ellenarson u...@applicon.is mailto:u...@applicon.is Added information regarding boot problem. The message upon boot is: Mounting root from hammer:serno/1.s1d tryroot serno/01.s1d no disk named 'serno/001.s1d' hammer_mountroot: can't find devvp boot mount failed: 6 mountroot *From:*users-err...@crater.dragonflybsd.org mailto:users-err...@crater.dragonflybsd.org [mailto:users-err...@crater.dragonflybsd.org mailto:users-err...@crater.dragonflybsd.org] *On Behalf Of *Úlfar Ellenarson *Sent:* Tuesday, February 22, 2011 12:35 PM *To:* users@crater.dragonflybsd.org mailto:users@crater.dragonflybsd.org *Subject:* cannot mount disk with hammer file system Hi. My first time posting on this list. My problem in a nutshell is I installed dragonfly bsd 2.8 in vmware workstation. I reinstalled the host system that vmware workstation was on and decided on using virtualbox. I imported my dragonfly bsd vmware workstatation vmdk files into virtualbox. Upon boot in virtualbox I run into the problem of mounting the disk. I am prompted at the boot prompt to detect the disk that the system resides on. I have tried hammer:ad0s1, hammer:ad0s1a, hammer:ad0s1d and just ad0s1. I am however not able to boot the system. I have also booted from the live iso image and mounted the system manually into /mnt using mount_hammer /dev/ad0s1a /mnt and took a screenshot of /etc/fstab. I however ask if there is a simple way to fix my mount problem. Any information needed in regards to solving this problem will be gladly appended. *kær kveðju/kind regards,* ** *Úlfar Ellenarson* SAP ráðgjafi / SAP Consultant cid:image001.jpg@01CAE862.EFF59A90 Borgartúni 37 105 Reykjavík, Ísland *T: *+354 563 6226 *E: *u...@applicon.is mailto:h...@applicon.is *W:*www.applicon.is http://www.applicon.is/
