I'm not sure whether users on this list prefer top or bottom posting, so
I've included the verbose dmesg below. I'll try disabling ACPI, and see
if that makes a difference.
Thanks for your help!
Andre
Simon 'corecode' Schubert wrote:
Andre LeClaire wrote:
The only problem I've experienced is that the floppy drive is no
longer recognized. It's configured in the kernel, but I get "fdc0:
cannot reserve I/O port range" in dmesg. I know floppies are antique,
but it would be nice if I could get it to work again. Can anybody give
any clues?
Not that I have a solution, but just to add another data point: are you
using ACPI? what happens if you don't/do? Could you please post a
verbose dmesg, i.e. boot -v at loader?
Thanks
simon
Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.10.1-RELEASE #0: Mon Aug 27 18:01:07 EDT 2007
[EMAIL PROTECTED]:/usr/src/sys/compile/FAROUT
Calibrating clock(s) ... TSC clock: 870288686 Hz, i8254 clock: 1193084 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel Pentium III (870.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff
real memory = 268419072 (262128K bytes)
Physical memory chunk(s):
0x1000 - 0x0009efff, 647168 bytes (158 pages)
0x004d1000 - 0x0ffebfff, 263303168 bytes (64283 pages)
avail memory = 252559360 (246640K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f9140
bios32: Entry = 0xf06a0 (c00f06a0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x6d0
pnpbios: Found PnP BIOS data at 0xc00fc110
pnpbios: Entry = f:c140 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc04a4000.
Preloaded elf module "/modules/acpi.ko" at 0xc04a41e8.
crypto:
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1):mode 1 addr port (0x0cf8) is 0x805c
pci_open(1a): mode1res=0x8000 (0x8000)
pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=25018086)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f0c90
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded0 30A 0x60 3 4 5 7 9 10 11 12
embedded0 30B 0x61 3 4 5 7 9 10 11 12
embedded0 30C 0x62 3 4 5 7 9 10 11 12
embedded0 30D 0x63 3 4 5 7 9 10 11 12
slot 1 28A 0x60 3 4 5 7 9 10 11 12
slot 1 28B 0x61 3 4 5 7 9 10 11 12
slot 1 28C 0x62 3 4 5 7 9 10 11 12
slot 1 28D 0x63 3 4 5 7 9 10 11 12
slot 2 29A 0x61 3 4 5 7 9 10 11 12
slot 2 29B 0x62 3 4 5 7 9 10 11 12
slot 2 29C 0x63 3 4 5 7 9 10 11 12
slot 2 29D 0x60 3 4 5 7 9 10 11 12
slot 3 2 10A 0x62 3 4 5 7 9 10 11 12
slot 3 2 10B 0x63 3 4 5 7 9 10 11 12
slot 3 2 10C 0x60 3 4 5 7 9 10 11 12
slot 3 2 10D 0x61 3 4 5 7 9 10 11 12
slot 4 2 11A 0x63 3 4 5 7 9 10 11 12
slot 4 2 11B 0x60 3 4 5 7 9 10 11 12
slot 4 2 11C 0x61 3 4 5 7 9 10 11 12
slot 4 2 11D 0x62 3 4 5 7 9 10 11 12
slot 5 2 14A 0x62 3 4 5 7 9 10 11 12
slot 5 2 14B 0x63 3 4 5 7 9 10 11 12
slot 5 2 14C 0x60 3 4 5 7 9 10 11 12
slot 5 2 14D 0x61 3 4 5 7 9 10 11 12
embedded0 31A 0x60 3 4 5 7 9 10 11 12
embedded0 31B 0x61 3 4 5 7 9 10 11 12
embedded0 31C 0x62 3 4 5 7 9 10 11 12
embedded0 31D 0x63 3 4 5 7 9 10 11 12
embedded01A 0x60 3 4 5 7 9 10 11 12
embedded01B 0x61 3 4 5 7 9 10 11 12
embedded01C 0x62 3 4 5 7 9 10 11 12
embedded01D 0x63 3 4 5 7 9 10 11 12
ACPI: RSDP @ 0x0xf5a20/0x0014 (v 0 ASUS )
ACPI: RSDT @ 0x0xfffc000/0x002C (v 1 ASUS P3C-2000 0x30303031 MSFT
0x31313031)
ACPI: FACP @ 0x0xfffc080/0x0074 (v 1 ASUS P3C-2000 0x30303031 MSFT
0x31313031)
ACPI: DSDT @ 0x0xfffc100/0x2CDF (v 1 ASUS P3C-2000 0x1000 MSFT
0x010B)
ACPI: FACS @ 0x0x000/0x0040
ACPI: BOOT @ 0x0xfffc040/0x0028 (v 1 ASUS P3C-2000 0x30303031 MSFT
0x31313031)
npx0.nexus0.root0
npx0: [tentative] on motherboard
npx0: INT 16 interface
Using MMX optimized bcopy/copyin/copyout
npx0: [attached!] on motherboard
acpi0.nexus0.root0
acpi0: [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min =