Re: intr 11 livelock limit messages
Sepherosa Ziehau wrote: On Sun, Jul 31, 2011 at 12:49 AM, Mark Doe mark.doe.p...@gmail.com wrote: Edward M. wrote: On 07/30/11 06:05, Pang Yan Han wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed It alternates between the above 2 messages and occurs without stop, even after I've logged in. May I know what is causing this and how can I solve it? Thanks. I was also getting getting the same messages, but they stop, when i switched from 32bit to 64 bit DragonFlyBSD.install. Regards, Edward I am still getting this messages on a 64Bit box (2.11-DEVEL). They start when i plugin a network card (doesnt matter which one, tested with 4 different brands) AND running on IDE mode instead of AHCI. Please post the boot_verbose dmesg, vmstat -iv, acpidump -t and acpidump -v Best Regards, sephe please review vmstat -iv, acpidump -t and acpidump -v http://paste.kde.org/104041/ and the dmesg.boot -v http://paste.kde.org/104059/
Re: intr 11 livelock limit messages
Sepherosa Ziehau wrote: On Sun, Jul 31, 2011 at 12:49 AM, Mark Doe mark.doe.p...@gmail.com wrote: Edward M. wrote: On 07/30/11 06:05, Pang Yan Han wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed It alternates between the above 2 messages and occurs without stop, even after I've logged in. May I know what is causing this and how can I solve it? Thanks. I was also getting getting the same messages, but they stop, when i switched from 32bit to 64 bit DragonFlyBSD.install. Regards, Edward I am still getting this messages on a 64Bit box (2.11-DEVEL). They start when i plugin a network card (doesnt matter which one, tested with 4 different brands) AND running on IDE mode instead of AHCI. Please post the boot_verbose dmesg, vmstat -iv, acpidump -t and acpidump -v Best Regards, sephe the normal dmesg reveals that livelock starts immediately after getting networkcard em0 (doesnt matter which brand here) active! dmesg | tail -150 snip ar0: 1907739MB FreeBSD PseudoRAID RAID0+1 (stripe 128 KB) status: READY ar0: 3907049984 sectors [46594C/255H/63S] subdisks defined as: ar0: disk0 READY (master) using ad8 at ata4-master ar0: disk1 READY (master) using ad10 at ata5-master ar0: disk2 READY (mirror) using ad12 at ata6-master ar0: disk3 READY (mirror) using ad14 at ata7-master ** ATA PseudoRAID ar1 Metadata ** = format Intel MatrixRAID typeRAID1 flags 0x01 1READY magic_0 0x4e318ed5 magic_1 0x generation 1 total_sectors 976773165 offset_sectors 0 heads 255 sectors 63 cylinders 60801 width 1 interleave 8 total_disks 2 disk 0: flags = 0x0b bONLINE,ASSIGNED,PRESENT ad16: sectors 976773165 disk 1: flags = 0x0b bONLINE,ASSIGNED,PRESENT ad18: sectors 976773165 = No policy for ar1 specified, or policy not found disk scheduler: set policy of ar1 to noop ar1: 476940MB Intel MatrixRAID RAID1 status: READY ar1: 976773165 sectors [60801C/255H/63S] subdisks defined as: ar1: disk0 READY (master) using ad16 at ata8-master ar1: disk1 READY (mirror) using ad18 at ata9-master ar0: Found GPT in slice #1 Mounting root from hammer:serno/WD-WCAV9L391158.s1d tryroot serno/WD-WCAV9L391158.s1d HAMMER(ROOT) recovery check seqno=01341e57 HAMMER(ROOT) recovery range 3000136c4a30-3000136c4a30 HAMMER(ROOT) recovery nexto 3000136c4a30 endseqno=01341e58 HAMMER(ROOT) mounted clean, no recovery needed Mounting devfs start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 6/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 3/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 3/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 404/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 404/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at
Re: intr 11 livelock limit messages
Hi Sepherosa, Turns out it's me using a UP kernel when I'm supposed to be using a SMP one. Sorry for the noise. On Sun, Jul 31, 2011 at 7:07 PM, Mark Doe mark.doe.p...@gmail.com wrote: Sepherosa Ziehau wrote: On Sun, Jul 31, 2011 at 12:49 AM, Mark Doe mark.doe.p...@gmail.com wrote: Edward M. wrote: On 07/30/11 06:05, Pang Yan Han wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed It alternates between the above 2 messages and occurs without stop, even after I've logged in. May I know what is causing this and how can I solve it? Thanks. I was also getting getting the same messages, but they stop, when i switched from 32bit to 64 bit DragonFlyBSD.install. Regards, Edward I am still getting this messages on a 64Bit box (2.11-DEVEL). They start when i plugin a network card (doesnt matter which one, tested with 4 different brands) AND running on IDE mode instead of AHCI. Please post the boot_verbose dmesg, vmstat -iv, acpidump -t and acpidump -v Best Regards, sephe the normal dmesg reveals that livelock starts immediately after getting networkcard em0 (doesnt matter which brand here) active! dmesg | tail -150 snip ar0: 1907739MB FreeBSD PseudoRAID RAID0+1 (stripe 128 KB) status: READY ar0: 3907049984 sectors [46594C/255H/63S] subdisks defined as: ar0: disk0 READY (master) using ad8 at ata4-master ar0: disk1 READY (master) using ad10 at ata5-master ar0: disk2 READY (mirror) using ad12 at ata6-master ar0: disk3 READY (mirror) using ad14 at ata7-master ** ATA PseudoRAID ar1 Metadata ** = format Intel MatrixRAID typeRAID1 flags 0x01 1READY magic_0 0x4e318ed5 magic_1 0x generation 1 total_sectors 976773165 offset_sectors 0 heads 255 sectors 63 cylinders 60801 width 1 interleave 8 total_disks 2 disk 0: flags = 0x0b bONLINE,ASSIGNED,PRESENT ad16: sectors 976773165 disk 1: flags = 0x0b bONLINE,ASSIGNED,PRESENT ad18: sectors 976773165 = No policy for ar1 specified, or policy not found disk scheduler: set policy of ar1 to noop ar1: 476940MB Intel MatrixRAID RAID1 status: READY ar1: 976773165 sectors [60801C/255H/63S] subdisks defined as: ar1: disk0 READY (master) using ad16 at ata8-master ar1: disk1 READY (mirror) using ad18 at ata9-master ar0: Found GPT in slice #1 Mounting root from hammer:serno/WD-WCAV9L391158.s1d tryroot serno/WD-WCAV9L391158.s1d HAMMER(ROOT) recovery check seqno=01341e57 HAMMER(ROOT) recovery range 3000136c4a30-3000136c4a30 HAMMER(ROOT) recovery nexto 3000136c4a30 endseqno=01341e58 HAMMER(ROOT) mounted clean, no recovery needed Mounting devfs start_init: trying /sbin/init em0: Link is up 1000 Mbps Full Duplex intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 6/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 3/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 4/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 5/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 0/2 hz, livelock removed intr 19 at 40001/4 hz, livelocked limit engaged! intr 19 at 3/2 hz, livelock
Re: intr 11 livelock limit messages
On 07/30/11 06:05, Pang Yan Han wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed It alternates between the above 2 messages and occurs without stop, even after I've logged in. May I know what is causing this and how can I solve it? Thanks. I was also getting getting the same messages, but they stop, when i switched from 32bit to 64 bit DragonFlyBSD.install. Regards, Edward
Re: intr 11 livelock limit messages
Edward M. wrote: On 07/30/11 06:05, Pang Yan Han wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed It alternates between the above 2 messages and occurs without stop, even after I've logged in. May I know what is causing this and how can I solve it? Thanks. I was also getting getting the same messages, but they stop, when i switched from 32bit to 64 bit DragonFlyBSD.install. Regards, Edward I am still getting this messages on a 64Bit box (2.11-DEVEL). They start when i plugin a network card (doesnt matter which one, tested with 4 different brands) AND running on IDE mode instead of AHCI. :-( The messages are really annoying.
Re: intr 11 livelock limit messages
On Sat, Jul 30, 2011 at 9:05 PM, Pang Yan Han pangyan...@gmail.com wrote: Hi guys, I've just installed DragonFlyBSD 2.10.1 and kept seeing the below messages at some point of booting: intr 11 at 40001/4 hz, livelocked limit engaged! intr 11 at x/2 hz, livelock removed Please test 2.11, and post the boot_verbose dmesg, vmstat -iv, acpidump -t and acpidump -v Thanks. Best Regards, sephe -- Tomorrow Will Never Die
