Incoming & Sent SMS content decode in sent_sms table in sqlbox

[Rasika Udayanga]

Dear All,
Im using sqlbox for sending and receiving GSM and Unicode sms. In both cases 
msgdata stored in below format in sent_sms table in mysql database.

%0D%BB%0D%C3%0D%D2%0D%9A

I think above is UCS-2BE/ UTF-16BE encoded. Please assist me as to how I can 
get the original message by decoding this, preferably using a mysql function or 
a c# method.

Tried setting alt-charset to ucs-2/ utf-8 in smsc config and enabling 
mo-record. Non of them gave me the solution.

Appreciate your assistance in advance.

Thanks
Rasika Udayanga.

RE: 0x58 | Throttling error

[Rene Kluwen]

You could at the throughput configuration parameter in your group = smsc.

See the Kannel userguide.

 

== Rene

 

Van: users  Namens Robin C
Verzonden: maandag 23 september 2019 13:09
Aan: users@kannel.org
Onderwerp: 0x58 | Throttling error

 

Dear team we are getting error 0x58 . What is the reason for this error and how 
can i rectify this? 


 

-- 

 Thanks & Regards,

  

  Robin C



 

 

 

Disclaimer:  This message contains confidential information and is intended 
only for the individual named.  If you are not the named addressee you should 
not disseminate, distribute or copy this e-mail.  Please notify the sender 
immediately by e-mail if you have received this e-mail by mistake and delete 
this e-mail from your system.  E-mail transmission cannot be guaranteed to be 
secure or error-free as information could be intercepted, corrupted, lost, 
destroyed, arrive late or incomplete, or contain viruses.  The sender therefore 
does not accept liability for any errors or omissions in the contents of this 
message, which arise as a result of e-mail transmission.  If verification is 
required please request a hard-copy version.

7 Switch off as you go |q Recycle always | P Print only if absolutely necessary

0x58 | Throttling error

[Robin C]

Dear team we are getting error 0x58 . What is the reason for this error and
how can i rectify this?

-- 
 *Thanks & Regards,*



  Robin C






Disclaimer:  This message contains confidential information and is intended
only for the individual named.  If you are not the named addressee you
should not disseminate, distribute or copy this e-mail.  Please notify the
sender immediately by e-mail if you have received this e-mail by mistake
and delete this e-mail from your system.  E-mail transmission cannot be
guaranteed to be secure or error-free as information could be intercepted,
corrupted, lost, destroyed, arrive late or incomplete, or contain
viruses.  The sender therefore does not accept liability for any errors or
omissions in the contents of this message, which arise as a result of
e-mail transmission.  If verification is required please request a
hard-copy version.

*7* Switch off as you go |*q *Recycle always | P Print only if absolutely
necessary

Re: SMSC - Maximum retries for message exceeded, discarding it!

[Denis Lezgin]

alright, thanks for your help!

Best Regards,





On Mon, 23 Sep 2019 at 12:26, Rene Kluwen  wrote:

> If you want the message the be retried, then yes you can increase it.
>
> If you omit the option to begin with, it’s retried until the expiry time.
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 11:16
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> alright, that makes more sense now. our config set as following:
>
>
>
> sms-resend-retry = 1
>
>
>
> which means we should increase it?
>
>
>
> thanks
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 12:06, Rene Kluwen  wrote:
>
> It means that you have the configuration option sms-resend-retry set in
> your group = core from your Kannel config.
>
> It defines the number that bearerbox tries to deliver the message before
> giving up.
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 11:00
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> I see, the question is not regarding the 0x0008 error code as we know
> its description and how to process it but the question is regarding the
> "Maximum retries for message exceeded, discarding it!"
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 11:58, Rene Kluwen  wrote:
>
> No, the smsc returns error code 0x0008.
>
> Kannel calls it a “system error” but the real meaning depends on your smsc.
>
>
>
> == Rene Kluwen
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 10:56
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> Hi Rene,
>
>
>
> Thanks for quick response.
>
>
>
> You mean that the " Maximum retries for message exceeded, discarding it! "
> is coming from SMSC? as for me it looks like Kannel response.
>
>
>
> Thanks
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 11:54, Rene Kluwen  wrote:
>
> Hi Denis,
>
>
>
> It can mean different things. It’s best to inquire with your smsc
> themselves to ask them what this message means.
>
>
>
> Regards,
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* users  *Namens *Denis Lezgin
> *Verzonden:* maandag 23 september 2019 10:51
> *Aan:* users@kannel.org
> *Onderwerp:* SMSC - Maximum retries for message exceeded, discarding it!
>
>
>
> Hi guys,
>
>
>
> I noticed strange behavior of bearerbox (SMSC side of it) that most likely
> have been occurring for some long time but I just noticed it.
>
>
>
> In smsc log i see following warning message:
>
>
>
> "Maximum retries for message exceeded, discarding it!"
>
>
>
> and it comes right after submit_sm_resp that has an error from SMSC within
> it, for example:
>
>
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
> 0x8004
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
> 0x001c162f
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04
> 23 .#
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
> 0x0008 (System Error) in response to submit_sm PDU.
>
> 2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
> exceeded, discarding it!
>
>
>
> SMSC conf:
>
>
>
> group = smsc
> smsc = smpp
> smsc-id =
> smsc-admin-id =
> allowed-smsc-id =
> host =
> port =
> transceiver-mode = true
> throughput = 30
> smsc-username =
> smsc-password =
> interface-version = 34
> system-type = "ESME"
> source-addr-ton = 3
> source-addr-npi = 9
> dest-addr-ton = 1
> dest-addr-npi = 1
> reconnect-delay = 10
> enquire-link-interval = 60
> address-range = ""
> log-file = "/opt/kannel/var/log/smsc_.log"
> log-level = 0
> msg-id-type = 0x01
> source-addr-autodetect = yes
>
>
>
> The "0x0008 (System Error)" is ok, we know what this error means and
> how to process it.
>
>
>
> I searched a lot about this warning message over the internet but couldn't
> find anything.
>
>
>
> Is there anyway to overcome this issue 

RE: SMSC - Maximum retries for message exceeded, discarding it!

[Rene Kluwen]

If you want the message the be retried, then yes you can increase it.

If you omit the option to begin with, it’s retried until the expiry time.

 

Van: Denis Lezgin  
Verzonden: maandag 23 september 2019 11:16
Aan: Rene Kluwen 
CC: users@kannel.org
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

alright, that makes more sense now. our config set as following:

 

sms-resend-retry = 1

 

which means we should increase it?

 

thanks




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 12:06, Rene Kluwen mailto:rene.klu...@chimit.nl> > wrote:

It means that you have the configuration option sms-resend-retry set in your 
group = core from your Kannel config.

It defines the number that bearerbox tries to deliver the message before giving 
up.

 

Rene Kluwen

 

 

Van: Denis Lezgin  
Verzonden: maandag 23 september 2019 11:00
Aan: Rene Kluwen mailto:rene.klu...@chimit.nl> >
CC: users@kannel.org  
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

I see, the question is not regarding the 0x0008 error code as we know its 
description and how to process it but the question is regarding the "Maximum 
retries for message exceeded, discarding it!"




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 11:58, Rene Kluwen mailto:rene.klu...@chimit.nl> > wrote:

No, the smsc returns error code 0x0008.

Kannel calls it a “system error” but the real meaning depends on your smsc.

 

== Rene Kluwen

 

Van: Denis Lezgin mailto:de...@veoo.com> > 
Verzonden: maandag 23 september 2019 10:56
Aan: Rene Kluwen mailto:rene.klu...@chimit.nl> >
CC: users@kannel.org  
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi Rene,

 

Thanks for quick response.

 

You mean that the " Maximum retries for message exceeded, discarding it! " is 
coming from SMSC? as for me it looks like Kannel response.

 

Thanks 




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 11:54, Rene Kluwen mailto:rene.klu...@chimit.nl> > wrote:

Hi Denis,

 

It can mean different things. It’s best to inquire with your smsc themselves to 
ask them what this message means.

 

Regards,

 

Rene Kluwen

 

 

Van: users mailto:users-boun...@kannel.org> > Namens 
Denis Lezgin
Verzonden: maandag 23 september 2019 10:51
Aan: users@kannel.org  
Onderwerp: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi guys,

 

I noticed strange behavior of bearerbox (SMSC side of it) that most likely have 
been occurring for some long time but I just noticed it.

 

In smsc log i see following warning message:

 

"Maximum retries for message exceeded, discarding it!"

 

and it comes right after submit_sm_resp that has an error from SMSC within it, 
for example:

 

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:

2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 = 0x8004

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008

2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 = 0x001c162f

2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:

2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2

2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3

2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0

2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04 23
 .#

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.

2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code 
0x0008 (System Error) in response to submit_sm PDU.

2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message exceeded, 
discarding it!

 

SMSC conf:

 

group = smsc
smsc = smpp
smsc-id = 
smsc-admin-id =
allowed-smsc-id =
host = 
port = 
transceiver-mode = true
throughput = 30
smsc-username = 
smsc-password = 
interface-version = 34
system-type = "ESME"
source-addr-ton = 3
source-addr-npi = 9
dest-addr-ton = 1
dest-addr-npi = 1
reconnect-delay = 10
enquire-link-interval = 60
address-range = ""
log-file = "/opt/kannel/var/log/smsc_.log"
log-level = 0
msg-id-type = 0x01
source-addr-autodetect = yes

 

The "0x0008 (System Error)" is ok, we know what this error means and how to 
process it.

 

I searched a lot about this warning message over the internet but couldn't find 
anything.

 

Is there anyway to overcome this issue maybe?

 

 

Our system information:

Kannel bearerbox version `svn-r5180M'

OS: Ubuntu 14.04.4 LTS

 

 

Thanks in advance!



Best Regards,

 

 

Re: SMSC - Maximum retries for message exceeded, discarding it!

[Denis Lezgin]

alright, that makes more sense now. our config set as following:

sms-resend-retry = 1

which means we should increase it?

thanks

Best Regards,





On Mon, 23 Sep 2019 at 12:06, Rene Kluwen  wrote:

> It means that you have the configuration option sms-resend-retry set in
> your group = core from your Kannel config.
>
> It defines the number that bearerbox tries to deliver the message before
> giving up.
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 11:00
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> I see, the question is not regarding the 0x0008 error code as we know
> its description and how to process it but the question is regarding the
> "Maximum retries for message exceeded, discarding it!"
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 11:58, Rene Kluwen  wrote:
>
> No, the smsc returns error code 0x0008.
>
> Kannel calls it a “system error” but the real meaning depends on your smsc.
>
>
>
> == Rene Kluwen
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 10:56
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> Hi Rene,
>
>
>
> Thanks for quick response.
>
>
>
> You mean that the " Maximum retries for message exceeded, discarding it! "
> is coming from SMSC? as for me it looks like Kannel response.
>
>
>
> Thanks
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 11:54, Rene Kluwen  wrote:
>
> Hi Denis,
>
>
>
> It can mean different things. It’s best to inquire with your smsc
> themselves to ask them what this message means.
>
>
>
> Regards,
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* users  *Namens *Denis Lezgin
> *Verzonden:* maandag 23 september 2019 10:51
> *Aan:* users@kannel.org
> *Onderwerp:* SMSC - Maximum retries for message exceeded, discarding it!
>
>
>
> Hi guys,
>
>
>
> I noticed strange behavior of bearerbox (SMSC side of it) that most likely
> have been occurring for some long time but I just noticed it.
>
>
>
> In smsc log i see following warning message:
>
>
>
> "Maximum retries for message exceeded, discarding it!"
>
>
>
> and it comes right after submit_sm_resp that has an error from SMSC within
> it, for example:
>
>
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
> 0x8004
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
> 0x001c162f
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04
> 23 .#
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
> 0x0008 (System Error) in response to submit_sm PDU.
>
> 2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
> exceeded, discarding it!
>
>
>
> SMSC conf:
>
>
>
> group = smsc
> smsc = smpp
> smsc-id =
> smsc-admin-id =
> allowed-smsc-id =
> host =
> port =
> transceiver-mode = true
> throughput = 30
> smsc-username =
> smsc-password =
> interface-version = 34
> system-type = "ESME"
> source-addr-ton = 3
> source-addr-npi = 9
> dest-addr-ton = 1
> dest-addr-npi = 1
> reconnect-delay = 10
> enquire-link-interval = 60
> address-range = ""
> log-file = "/opt/kannel/var/log/smsc_.log"
> log-level = 0
> msg-id-type = 0x01
> source-addr-autodetect = yes
>
>
>
> The "0x0008 (System Error)" is ok, we know what this error means and
> how to process it.
>
>
>
> I searched a lot about this warning message over the internet but couldn't
> find anything.
>
>
>
> Is there anyway to overcome this issue maybe?
>
>
>
>
>
> Our system information:
>
> Kannel bearerbox version `svn-r5180M'
>
> OS: Ubuntu 14.04.4 LTS
>
>
>
>
>
> Thanks in advance!
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>

RE: SMSC - Maximum retries for message exceeded, discarding it!

[Rene Kluwen]

It means that you have the configuration option sms-resend-retry set in your 
group = core from your Kannel config.

It defines the number that bearerbox tries to deliver the message before giving 
up.

 

Rene Kluwen

 

 

Van: Denis Lezgin  
Verzonden: maandag 23 september 2019 11:00
Aan: Rene Kluwen 
CC: users@kannel.org
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

I see, the question is not regarding the 0x0008 error code as we know its 
description and how to process it but the question is regarding the "Maximum 
retries for message exceeded, discarding it!"




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 11:58, Rene Kluwen  wrote:

No, the smsc returns error code 0x0008.

Kannel calls it a “system error” but the real meaning depends on your smsc.

 

== Rene Kluwen

 

Van: Denis Lezgin mailto:de...@veoo.com> > 
Verzonden: maandag 23 september 2019 10:56
Aan: Rene Kluwen mailto:rene.klu...@chimit.nl> >
CC: users@kannel.org  
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi Rene,

 

Thanks for quick response.

 

You mean that the " Maximum retries for message exceeded, discarding it! " is 
coming from SMSC? as for me it looks like Kannel response.

 

Thanks 




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 11:54, Rene Kluwen mailto:rene.klu...@chimit.nl> > wrote:

Hi Denis,

 

It can mean different things. It’s best to inquire with your smsc themselves to 
ask them what this message means.

 

Regards,

 

Rene Kluwen

 

 

Van: users mailto:users-boun...@kannel.org> > Namens 
Denis Lezgin
Verzonden: maandag 23 september 2019 10:51
Aan: users@kannel.org  
Onderwerp: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi guys,

 

I noticed strange behavior of bearerbox (SMSC side of it) that most likely have 
been occurring for some long time but I just noticed it.

 

In smsc log i see following warning message:

 

"Maximum retries for message exceeded, discarding it!"

 

and it comes right after submit_sm_resp that has an error from SMSC within it, 
for example:

 

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:

2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 = 0x8004

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008

2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 = 0x001c162f

2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:

2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2

2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3

2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0

2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04 23
 .#

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.

2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code 
0x0008 (System Error) in response to submit_sm PDU.

2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message exceeded, 
discarding it!

 

SMSC conf:

 

group = smsc
smsc = smpp
smsc-id = 
smsc-admin-id =
allowed-smsc-id =
host = 
port = 
transceiver-mode = true
throughput = 30
smsc-username = 
smsc-password = 
interface-version = 34
system-type = "ESME"
source-addr-ton = 3
source-addr-npi = 9
dest-addr-ton = 1
dest-addr-npi = 1
reconnect-delay = 10
enquire-link-interval = 60
address-range = ""
log-file = "/opt/kannel/var/log/smsc_.log"
log-level = 0
msg-id-type = 0x01
source-addr-autodetect = yes

 

The "0x0008 (System Error)" is ok, we know what this error means and how to 
process it.

 

I searched a lot about this warning message over the internet but couldn't find 
anything.

 

Is there anyway to overcome this issue maybe?

 

 

Our system information:

Kannel bearerbox version `svn-r5180M'

OS: Ubuntu 14.04.4 LTS

 

 

Thanks in advance!



Best Regards,

 

 

Re: SMSC - Maximum retries for message exceeded, discarding it!

[Denis Lezgin]

I see, the question is not regarding the 0x0008 error code as we know
its description and how to process it but the question is regarding the
"Maximum retries for message exceeded, discarding it!"

Best Regards,





On Mon, 23 Sep 2019 at 11:58, Rene Kluwen  wrote:

> No, the smsc returns error code 0x0008.
>
> Kannel calls it a “system error” but the real meaning depends on your smsc.
>
>
>
> == Rene Kluwen
>
>
>
> *Van:* Denis Lezgin 
> *Verzonden:* maandag 23 september 2019 10:56
> *Aan:* Rene Kluwen 
> *CC:* users@kannel.org
> *Onderwerp:* Re: SMSC - Maximum retries for message exceeded, discarding
> it!
>
>
>
> Hi Rene,
>
>
>
> Thanks for quick response.
>
>
>
> You mean that the " Maximum retries for message exceeded, discarding it! "
> is coming from SMSC? as for me it looks like Kannel response.
>
>
>
> Thanks
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>
>
>
>
> On Mon, 23 Sep 2019 at 11:54, Rene Kluwen  wrote:
>
> Hi Denis,
>
>
>
> It can mean different things. It’s best to inquire with your smsc
> themselves to ask them what this message means.
>
>
>
> Regards,
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* users  *Namens *Denis Lezgin
> *Verzonden:* maandag 23 september 2019 10:51
> *Aan:* users@kannel.org
> *Onderwerp:* SMSC - Maximum retries for message exceeded, discarding it!
>
>
>
> Hi guys,
>
>
>
> I noticed strange behavior of bearerbox (SMSC side of it) that most likely
> have been occurring for some long time but I just noticed it.
>
>
>
> In smsc log i see following warning message:
>
>
>
> "Maximum retries for message exceeded, discarding it!"
>
>
>
> and it comes right after submit_sm_resp that has an error from SMSC within
> it, for example:
>
>
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
> 0x8004
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
> 0x001c162f
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04
> 23 .#
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
> 0x0008 (System Error) in response to submit_sm PDU.
>
> 2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
> exceeded, discarding it!
>
>
>
> SMSC conf:
>
>
>
> group = smsc
> smsc = smpp
> smsc-id =
> smsc-admin-id =
> allowed-smsc-id =
> host =
> port =
> transceiver-mode = true
> throughput = 30
> smsc-username =
> smsc-password =
> interface-version = 34
> system-type = "ESME"
> source-addr-ton = 3
> source-addr-npi = 9
> dest-addr-ton = 1
> dest-addr-npi = 1
> reconnect-delay = 10
> enquire-link-interval = 60
> address-range = ""
> log-file = "/opt/kannel/var/log/smsc_.log"
> log-level = 0
> msg-id-type = 0x01
> source-addr-autodetect = yes
>
>
>
> The "0x0008 (System Error)" is ok, we know what this error means and
> how to process it.
>
>
>
> I searched a lot about this warning message over the internet but couldn't
> find anything.
>
>
>
> Is there anyway to overcome this issue maybe?
>
>
>
>
>
> Our system information:
>
> Kannel bearerbox version `svn-r5180M'
>
> OS: Ubuntu 14.04.4 LTS
>
>
>
>
>
> Thanks in advance!
>
> 
>
> Best Regards,
>
>
>
>
>
> [image: Afbeelding verwijderd door afzender.]
>
>

RE: SMSC - Maximum retries for message exceeded, discarding it!

[Rene Kluwen]

No, the smsc returns error code 0x0008.

Kannel calls it a “system error” but the real meaning depends on your smsc.

 

== Rene Kluwen

 

Van: Denis Lezgin  
Verzonden: maandag 23 september 2019 10:56
Aan: Rene Kluwen 
CC: users@kannel.org
Onderwerp: Re: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi Rene,

 

Thanks for quick response.

 

You mean that the " Maximum retries for message exceeded, discarding it! " is 
coming from SMSC? as for me it looks like Kannel response.

 

Thanks 




Best Regards,

 

 



 

 

On Mon, 23 Sep 2019 at 11:54, Rene Kluwen mailto:rene.klu...@chimit.nl> > wrote:

Hi Denis,

 

It can mean different things. It’s best to inquire with your smsc themselves to 
ask them what this message means.

 

Regards,

 

Rene Kluwen

 

 

Van: users mailto:users-boun...@kannel.org> > Namens 
Denis Lezgin
Verzonden: maandag 23 september 2019 10:51
Aan: users@kannel.org  
Onderwerp: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi guys,

 

I noticed strange behavior of bearerbox (SMSC side of it) that most likely have 
been occurring for some long time but I just noticed it.

 

In smsc log i see following warning message:

 

"Maximum retries for message exceeded, discarding it!"

 

and it comes right after submit_sm_resp that has an error from SMSC within it, 
for example:

 

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:

2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 = 0x8004

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008

2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 = 0x001c162f

2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:

2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2

2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3

2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0

2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04 23
 .#

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.

2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code 
0x0008 (System Error) in response to submit_sm PDU.

2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message exceeded, 
discarding it!

 

SMSC conf:

 

group = smsc
smsc = smpp
smsc-id = 
smsc-admin-id =
allowed-smsc-id =
host = 
port = 
transceiver-mode = true
throughput = 30
smsc-username = 
smsc-password = 
interface-version = 34
system-type = "ESME"
source-addr-ton = 3
source-addr-npi = 9
dest-addr-ton = 1
dest-addr-npi = 1
reconnect-delay = 10
enquire-link-interval = 60
address-range = ""
log-file = "/opt/kannel/var/log/smsc_.log"
log-level = 0
msg-id-type = 0x01
source-addr-autodetect = yes

 

The "0x0008 (System Error)" is ok, we know what this error means and how to 
process it.

 

I searched a lot about this warning message over the internet but couldn't find 
anything.

 

Is there anyway to overcome this issue maybe?

 

 

Our system information:

Kannel bearerbox version `svn-r5180M'

OS: Ubuntu 14.04.4 LTS

 

 

Thanks in advance!



Best Regards,

 

 

Re: SMSC - Maximum retries for message exceeded, discarding it!

[Denis Lezgin]

Hi Rene,

Thanks for quick response.

You mean that the " Maximum retries for message exceeded, discarding it! "
is coming from SMSC? as for me it looks like Kannel response.

Thanks

Best Regards,





On Mon, 23 Sep 2019 at 11:54, Rene Kluwen  wrote:

> Hi Denis,
>
>
>
> It can mean different things. It’s best to inquire with your smsc
> themselves to ask them what this message means.
>
>
>
> Regards,
>
>
>
> Rene Kluwen
>
>
>
>
>
> *Van:* users  *Namens *Denis Lezgin
> *Verzonden:* maandag 23 september 2019 10:51
> *Aan:* users@kannel.org
> *Onderwerp:* SMSC - Maximum retries for message exceeded, discarding it!
>
>
>
> Hi guys,
>
>
>
> I noticed strange behavior of bearerbox (SMSC side of it) that most likely
> have been occurring for some long time but I just noticed it.
>
>
>
> In smsc log i see following warning message:
>
>
>
> "Maximum retries for message exceeded, discarding it!"
>
>
>
> and it comes right after submit_sm_resp that has an error from SMSC within
> it, for example:
>
>
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
> 0x8004
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
> 0x001c162f
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04
> 23 .#
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.
>
> 2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
> 0x0008 (System Error) in response to submit_sm PDU.
>
> 2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
> exceeded, discarding it!
>
>
>
> SMSC conf:
>
>
>
> group = smsc
> smsc = smpp
> smsc-id =
> smsc-admin-id =
> allowed-smsc-id =
> host =
> port =
> transceiver-mode = true
> throughput = 30
> smsc-username =
> smsc-password =
> interface-version = 34
> system-type = "ESME"
> source-addr-ton = 3
> source-addr-npi = 9
> dest-addr-ton = 1
> dest-addr-npi = 1
> reconnect-delay = 10
> enquire-link-interval = 60
> address-range = ""
> log-file = "/opt/kannel/var/log/smsc_.log"
> log-level = 0
> msg-id-type = 0x01
> source-addr-autodetect = yes
>
>
>
> The "0x0008 (System Error)" is ok, we know what this error means and
> how to process it.
>
>
>
> I searched a lot about this warning message over the internet but couldn't
> find anything.
>
>
>
> Is there anyway to overcome this issue maybe?
>
>
>
>
>
> Our system information:
>
> Kannel bearerbox version `svn-r5180M'
>
> OS: Ubuntu 14.04.4 LTS
>
>
>
>
>
> Thanks in advance!
>
> 
>
> Best Regards,
>
>
>
>
>
>

RE: SMSC - Maximum retries for message exceeded, discarding it!

[Rene Kluwen]

Hi Denis,

 

It can mean different things. It’s best to inquire with your smsc themselves to 
ask them what this message means.

 

Regards,

 

Rene Kluwen

 

 

Van: users  Namens Denis Lezgin
Verzonden: maandag 23 september 2019 10:51
Aan: users@kannel.org
Onderwerp: SMSC - Maximum retries for message exceeded, discarding it!

 

Hi guys,

 

I noticed strange behavior of bearerbox (SMSC side of it) that most likely have 
been occurring for some long time but I just noticed it.

 

In smsc log i see following warning message:

 

"Maximum retries for message exceeded, discarding it!"

 

and it comes right after submit_sm_resp that has an error from SMSC within it, 
for example:

 

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:

2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 = 0x8004

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008

2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 = 0x001c162f

2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:

2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2

2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3

2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0

2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04 23
 .#

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.

2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code 
0x0008 (System Error) in response to submit_sm PDU.

2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message exceeded, 
discarding it!

 

SMSC conf:

 

group = smsc
smsc = smpp
smsc-id = 
smsc-admin-id =
allowed-smsc-id =
host = 
port = 
transceiver-mode = true
throughput = 30
smsc-username = 
smsc-password = 
interface-version = 34
system-type = "ESME"
source-addr-ton = 3
source-addr-npi = 9
dest-addr-ton = 1
dest-addr-npi = 1
reconnect-delay = 10
enquire-link-interval = 60
address-range = ""
log-file = "/opt/kannel/var/log/smsc_.log"
log-level = 0
msg-id-type = 0x01
source-addr-autodetect = yes

 

The "0x0008 (System Error)" is ok, we know what this error means and how to 
process it.

 

I searched a lot about this warning message over the internet but couldn't find 
anything.

 

Is there anyway to overcome this issue maybe?

 

 

Our system information:

Kannel bearerbox version `svn-r5180M'

OS: Ubuntu 14.04.4 LTS

 

 

Thanks in advance!



Best Regards,

 

 

  

 

SMSC - Maximum retries for message exceeded, discarding it!

[Denis Lezgin]

Hi guys,

I noticed strange behavior of bearerbox (SMSC side of it) that most likely
have been occurring for some long time but I just noticed it.

In smsc log i see following warning message:

"Maximum retries for message exceeded, discarding it!"

and it comes right after submit_sm_resp that has an error from SMSC within
it, for example:

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU 0x7f209a72a760 dump:

2019-09-23 08:29:03 [11913] [86] DEBUG:   type_name: submit_sm_resp

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_id: 2147483652 =
0x8004

2019-09-23 08:29:03 [11913] [86] DEBUG:   command_status: 8 = 0x0008

2019-09-23 08:29:03 [11913] [86] DEBUG:   sequence_number: 1840687 =
0x001c162f

2019-09-23 08:29:03 [11913] [86] DEBUG:   message_id:

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string at 0x7f209a78aba0:

2019-09-23 08:29:03 [11913] [86] DEBUG:  len:  2

2019-09-23 08:29:03 [11913] [86] DEBUG:  size: 3

2019-09-23 08:29:03 [11913] [86] DEBUG:  immutable: 0

2019-09-23 08:29:03 [11913] [86] DEBUG:  data: 04
23 .#

2019-09-23 08:29:03 [11913] [86] DEBUG:Octet string dump ends.

2019-09-23 08:29:03 [11913] [86] DEBUG: SMPP PDU dump ends.

2019-09-23 08:29:03 [11913] [86] ERROR: SMPP[]: SMSC returned error code
0x0008 (System Error) in response to submit_sm PDU.

2019-09-23 08:29:03 [11913] [86] WARNING: Maximum retries for message
exceeded, discarding it!


SMSC conf:


group = smsc
smsc = smpp
smsc-id =
smsc-admin-id =
allowed-smsc-id =
host =
port =
transceiver-mode = true
throughput = 30
smsc-username =
smsc-password =
interface-version = 34
system-type = "ESME"
source-addr-ton = 3
source-addr-npi = 9
dest-addr-ton = 1
dest-addr-npi = 1
reconnect-delay = 10
enquire-link-interval = 60
address-range = ""
log-file = "/opt/kannel/var/log/smsc_.log"
log-level = 0
msg-id-type = 0x01
source-addr-autodetect = yes


The "0x0008 (System Error)" is ok, we know what this error means and
how to process it.


I searched a lot about this warning message over the internet but couldn't
find anything.


Is there anyway to overcome this issue maybe?



Our system information:

Kannel bearerbox version `svn-r5180M'

OS: Ubuntu 14.04.4 LTS


Thanks in advance!

Best Regards,