Re: draftsight
Le 30/04/2018 à 15:25, Ed Greshko a écrit : > On 04/30/18 20:46, François Patte wrote: >> Le 30/04/2018 à 00:43, Ed Greshko a écrit : >>> On 04/30/18 03:37, Ed Greshko wrote: >>>> On 04/30/18 00:10, François Patte wrote: >>>>> So, my conclusion is that it does not like xfce... How can I find out >>>>> what is wrong in xfce for this program? >>>> I'll give xfce a try later today. >>>> >>>> >>> I tried draftsight with xfce in a VM just now. I used F28 since I was >>> already >>> testing that. And it works just fine. >> I am wondering if the problem is not related to the graphic card and its >> driver (nvidia gtx 1050 ti, driver nvidia): as another guy told me that >> this program worked fine under debian/xfce, I installed a vm with debian >> 9 and xfce. It works *but* if I enable the 3D acceleration for the guest >> (which, according to the virtualbox help, is supposed to transfer to the >> guest the 3D capabilities of the host), the program crashes as it does >> on the host. >> >> What can I do? Is it possible to disable the 3D capabilities of the >> nvidia driver/card only for one program? > > I don't know if that is possible. I kinda doubt it. > >> >>> I think you should run it from the command line "strace >>> /opt/dassault-systemes/DraftSight/Linux/DraftSight" and see what it tells >>> you. >> Too much ununderstandable (for me) information... >> > > You can post the output to a site for others to look at? That's a very long file... maybe someone can search a clue reading it. I am unable to do something like that! Many thanks to whom could do that. http://www.math-info.univ-paris5.fr/~patte/draftsight-log -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/30/18 20:46, François Patte wrote: > Le 30/04/2018 à 00:43, Ed Greshko a écrit : >> On 04/30/18 03:37, Ed Greshko wrote: >>> On 04/30/18 00:10, François Patte wrote: >>>> So, my conclusion is that it does not like xfce... How can I find out >>>> what is wrong in xfce for this program? >>> I'll give xfce a try later today. >>> >>> >> I tried draftsight with xfce in a VM just now. I used F28 since I was >> already >> testing that. And it works just fine. > I am wondering if the problem is not related to the graphic card and its > driver (nvidia gtx 1050 ti, driver nvidia): as another guy told me that > this program worked fine under debian/xfce, I installed a vm with debian > 9 and xfce. It works *but* if I enable the 3D acceleration for the guest > (which, according to the virtualbox help, is supposed to transfer to the > guest the 3D capabilities of the host), the program crashes as it does > on the host. > > What can I do? Is it possible to disable the 3D capabilities of the > nvidia driver/card only for one program? I don't know if that is possible. I kinda doubt it. > >> I think you should run it from the command line "strace >> /opt/dassault-systemes/DraftSight/Linux/DraftSight" and see what it tells >> you. > Too much ununderstandable (for me) information... > You can post the output to a site for others to look at? -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 30/04/2018 à 00:43, Ed Greshko a écrit : > On 04/30/18 03:37, Ed Greshko wrote: >> On 04/30/18 00:10, François Patte wrote: >>> So, my conclusion is that it does not like xfce... How can I find out >>> what is wrong in xfce for this program? >> >> I'll give xfce a try later today. >> >> > I tried draftsight with xfce in a VM just now. I used F28 since I was already > testing that. And it works just fine. I am wondering if the problem is not related to the graphic card and its driver (nvidia gtx 1050 ti, driver nvidia): as another guy told me that this program worked fine under debian/xfce, I installed a vm with debian 9 and xfce. It works *but* if I enable the 3D acceleration for the guest (which, according to the virtualbox help, is supposed to transfer to the guest the 3D capabilities of the host), the program crashes as it does on the host. What can I do? Is it possible to disable the 3D capabilities of the nvidia driver/card only for one program? > > I think you should run it from the command line "strace > /opt/dassault-systemes/DraftSight/Linux/DraftSight" and see what it tells you. Too much ununderstandable (for me) information... -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/2018 09:36 AM, François Patte wrote: nothing appears in the window when I open a file! LibreCAD is truly an adventure to use. I have had it open zoomed into a blank section of a drawing, making me think there was nothing in the drawing. Look for a "zoom auto" function somewhere. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/2018 06:27 PM, ToddAndMargo wrote: On 04/29/2018 09:36 AM, François Patte wrote: Le 29/04/2018 à 13:01, ToddAndMargo a écrit : On 04/29/2018 03:47 AM, ToddAndMargo wrote: On 04/29/2018 03:39 AM, ToddAndMargo wrote: On 04/28/2018 03:12 AM, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. Hi François, I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly under Wine Staging. Both are free. $ rpm -qa wine-common wine-common-3.6-1.fc27.noarch HTH, -T Make sure you install the 32 bit version of Wine Staging # dnf install wine.i686 LibreCAD (CAD program from hxll) "says" is supports DWG. It supports MAc, Linux, and that OS whose name I will not mention. There is a version of librecad in fedora repositories but this does not work with the dwg files I have: nothing appears in the window when I open a file! It requires a plug in https://www.gnu.org/software/libredwg/ ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/2018 09:36 AM, François Patte wrote: Le 29/04/2018 à 13:01, ToddAndMargo a écrit : On 04/29/2018 03:47 AM, ToddAndMargo wrote: On 04/29/2018 03:39 AM, ToddAndMargo wrote: On 04/28/2018 03:12 AM, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. Hi François, I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly under Wine Staging. Both are free. $ rpm -qa wine-common wine-common-3.6-1.fc27.noarch HTH, -T Make sure you install the 32 bit version of Wine Staging # dnf install wine.i686 LibreCAD (CAD program from hxll) "says" is supports DWG. It supports MAc, Linux, and that OS whose name I will not mention. There is a version of librecad in fedora repositories but this does not work with the dwg files I have: nothing appears in the window when I open a file! It requires a plug in ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/30/18 03:37, Ed Greshko wrote: > On 04/30/18 00:10, François Patte wrote: >> So, my conclusion is that it does not like xfce... How can I find out >> what is wrong in xfce for this program? > > I'll give xfce a try later today. > > I tried draftsight with xfce in a VM just now. I used F28 since I was already testing that. And it works just fine. I think you should run it from the command line "strace /opt/dassault-systemes/DraftSight/Linux/DraftSight" and see what it tells you. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/30/18 00:10, François Patte wrote: > So, my conclusion is that it does not like xfce... How can I find out > what is wrong in xfce for this program? I'll give xfce a try later today. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 29/04/2018 à 13:01, ToddAndMargo a écrit : > On 04/29/2018 03:47 AM, ToddAndMargo wrote: >> On 04/29/2018 03:39 AM, ToddAndMargo wrote: >>> On 04/28/2018 03:12 AM, François Patte wrote: >>>> Bonjour, >>>> >>>> Does anyone succed to have this software working under fedora 27? >>>> >>>> https://www.3ds.com/products-services/draftsight-cad-software/free-download/ >>>> >>>> >>>> It is supposed to read autocad files (.dwg) >>>> >>>> Thank you. >>> >>> >>> Hi François, >>> >>> I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly >>> under Wine Staging. Both are free. >>> >>> $ rpm -qa wine-common >>> wine-common-3.6-1.fc27.noarch >>> >>> HTH, >>> -T >> >> Make sure you install the 32 bit version of Wine Staging >> >> # dnf install wine.i686 > > LibreCAD (CAD program from hxll) "says" is supports DWG. > It supports MAc, Linux, and that OS whose name I will > not mention. There is a version of librecad in fedora repositories but this does not work with the dwg files I have: nothing appears in the window when I open a file! -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 29/04/2018 à 12:39, ToddAndMargo a écrit : > On 04/28/2018 03:12 AM, François Patte wrote: >> Bonjour, >> >> Does anyone succed to have this software working under fedora 27? >> >> https://www.3ds.com/products-services/draftsight-cad-software/free-download/ >> >> >> It is supposed to read autocad files (.dwg) >> >> Thank you. > > > Hi François, > > I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly > under Wine Staging. Both are free. Thank you for this information. I never had much success with wine... I'll try. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 29/04/2018 à 10:46, Ed Greshko a écrit : > On 04/29/18 15:37, François Patte wrote: >> Le 29/04/2018 à 04:47, Ed Greshko a écrit : >>> On 04/28/18 22:30, Ed Greshko wrote: >>>> So, I suppose, I could say it "works for me". >>> >>> I will add that today I tried running the same program in a VM running >>> GNOME under >>> Wayland. >>> >>> I was able to start the program, and activate it. However, when starting >>> after >>> activation the work window did show but it indicated an error/crash. >>> >>> So, it would seem, the program isn't Wayland capable. >> I use X11 and it crashes >> >> I use xfce and I will try to use kde on a vm. > > Are you saying you never even get to the point where you need to enter > registration > information? > > FWIW, I installed using "dnf install draftSight.rpm". Just to make sure > we're > installing the same rpm > > [root@f27k egreshko]# sha256sum draftSight.rpm > 12a75f492cd76acf1680d75c411a8fea0e0e704423b22d75006671e0cd3be668 > draftSight.rpm > > [root@f27k egreshko]# ll draftSight.rpm > -rw-rw-r--. 1 egreshko egreshko 619933672 Apr 28 22:03 draftSight.rpm > > One thing I found a bit odd is that the binary is > > [root@f27k Linux]# file DraftSight > DraftSight: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), > dynamically > linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.24, > BuildID[sha1]=81edf414c1f1186bee8f0fb9fd9f21d55a29ac1a, with debug_info, not > stripped > > Meaning 64-bit, the dependencies it pulled in were all 32-bit > > Install draftsight-2018.2.0.3072-1.x86_64 @@commandline > Install expat-2.2.5-1.fc27.i686 @updates > Install glibc-2.26-27.fc27.i686 @updates > Install libICE-1.0.9-11.fc27.i686 @fedora > Install libSM-1.2.2-7.fc27.i686 @fedora > Install libX11-1.6.5-4.fc27.i686 @fedora > Install libX11-xcb-1.6.5-4.fc27.i686 @fedora > Install libXau-1.0.8-9.fc27.i686 @fedora > Install libXdamage-1.1.4-11.fc27.i686 @fedora > Install libXext-1.3.3-7.fc27.i686 @fedora > Install libXfixes-5.0.3-4.fc27.i686 @fedora > Install libXt-1.1.5-6.fc27.i686 @fedora > Install libXxf86vm-1.1.4-6.fc27.i686 @fedora > Install libdrm-2.4.91-1.fc27.i686 @updates > Install libgcc-7.3.1-5.fc27.i686 @updates > Install libglvnd-1:1.0.0-1.fc27.i686 @updates > Install libglvnd-glx-1:1.0.0-1.fc27.i686 @updates > Install libpciaccess-0.13.4-6.fc27.i686 @fedora > Install libselinux-2.7-3.fc27.i686 @updates > Install libsepol-2.7-2.fc27.i686 @updates > Install libstdc++-7.3.1-5.fc27.i686 @updates > Install libuuid-2.30.2-3.fc27.i686 @updates > Install libxcb-1.12-5.fc27.i686 @fedora > Install libxshmfence-1.2-6.fc27.i686 @fedora > Install mesa-libGL-17.3.6-1.fc27.i686 @updates > Install mesa-libGLU-9.0.0-13.fc27.i686 @fedora > Install mesa-libglapi-17.3.6-1.fc27.i686 @updates > Install nas-libs-1.9.4-10.fc27.i686 @fedora > Install nas-libs-1.9.4-10.fc27.x86_64 @fedora > Install pcre2-10.31-4.fc27.i686 @updates > Install zlib-1.2.11-4.fc27.i686 @fedora > > Did these also get pulled in when you installed? Yes no problem for this. I installed an f27 with kde desktop on a vm and the program works So, my conclusion is that it does not like xfce... How can I find out what is wrong in xfce for this program? -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/2018 03:47 AM, ToddAndMargo wrote: On 04/29/2018 03:39 AM, ToddAndMargo wrote: On 04/28/2018 03:12 AM, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. Hi François, I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly under Wine Staging. Both are free. $ rpm -qa wine-common wine-common-3.6-1.fc27.noarch HTH, -T Make sure you install the 32 bit version of Wine Staging # dnf install wine.i686 LibreCAD (CAD program from hxll) "says" is supports DWG. It supports MAc, Linux, and that OS whose name I will not mention. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/2018 03:39 AM, ToddAndMargo wrote: On 04/28/2018 03:12 AM, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. Hi François, I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly under Wine Staging. Both are free. $ rpm -qa wine-common wine-common-3.6-1.fc27.noarch HTH, -T Make sure you install the 32 bit version of Wine Staging # dnf install wine.i686 ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/28/2018 03:12 AM, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. Hi François, I have "IGS Viewer" and "DWGSee Pro 2018" both working perfectly under Wine Staging. Both are free. $ rpm -qa wine-common wine-common-3.6-1.fc27.noarch HTH, -T ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/29/18 15:37, François Patte wrote: > Le 29/04/2018 à 04:47, Ed Greshko a écrit : >> On 04/28/18 22:30, Ed Greshko wrote: >>> So, I suppose, I could say it "works for me". >> >> I will add that today I tried running the same program in a VM running GNOME >> under >> Wayland. >> >> I was able to start the program, and activate it. However, when starting >> after >> activation the work window did show but it indicated an error/crash. >> >> So, it would seem, the program isn't Wayland capable. > I use X11 and it crashes > > I use xfce and I will try to use kde on a vm. Are you saying you never even get to the point where you need to enter registration information? FWIW, I installed using "dnf install draftSight.rpm". Just to make sure we're installing the same rpm [root@f27k egreshko]# sha256sum draftSight.rpm 12a75f492cd76acf1680d75c411a8fea0e0e704423b22d75006671e0cd3be668 draftSight.rpm [root@f27k egreshko]# ll draftSight.rpm -rw-rw-r--. 1 egreshko egreshko 619933672 Apr 28 22:03 draftSight.rpm One thing I found a bit odd is that the binary is [root@f27k Linux]# file DraftSight DraftSight: ELF 64-bit LSB executable, x86-64, version 1 (GNU/Linux), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.24, BuildID[sha1]=81edf414c1f1186bee8f0fb9fd9f21d55a29ac1a, with debug_info, not stripped Meaning 64-bit, the dependencies it pulled in were all 32-bit Install draftsight-2018.2.0.3072-1.x86_64 @@commandline Install expat-2.2.5-1.fc27.i686 @updates Install glibc-2.26-27.fc27.i686 @updates Install libICE-1.0.9-11.fc27.i686 @fedora Install libSM-1.2.2-7.fc27.i686 @fedora Install libX11-1.6.5-4.fc27.i686 @fedora Install libX11-xcb-1.6.5-4.fc27.i686 @fedora Install libXau-1.0.8-9.fc27.i686 @fedora Install libXdamage-1.1.4-11.fc27.i686 @fedora Install libXext-1.3.3-7.fc27.i686 @fedora Install libXfixes-5.0.3-4.fc27.i686 @fedora Install libXt-1.1.5-6.fc27.i686 @fedora Install libXxf86vm-1.1.4-6.fc27.i686 @fedora Install libdrm-2.4.91-1.fc27.i686 @updates Install libgcc-7.3.1-5.fc27.i686 @updates Install libglvnd-1:1.0.0-1.fc27.i686 @updates Install libglvnd-glx-1:1.0.0-1.fc27.i686 @updates Install libpciaccess-0.13.4-6.fc27.i686 @fedora Install libselinux-2.7-3.fc27.i686 @updates Install libsepol-2.7-2.fc27.i686 @updates Install libstdc++-7.3.1-5.fc27.i686 @updates Install libuuid-2.30.2-3.fc27.i686 @updates Install libxcb-1.12-5.fc27.i686 @fedora Install libxshmfence-1.2-6.fc27.i686 @fedora Install mesa-libGL-17.3.6-1.fc27.i686 @updates Install mesa-libGLU-9.0.0-13.fc27.i686 @fedora Install mesa-libglapi-17.3.6-1.fc27.i686 @updates Install nas-libs-1.9.4-10.fc27.i686 @fedora Install nas-libs-1.9.4-10.fc27.x86_64 @fedora Install pcre2-10.31-4.fc27.i686 @updates Install zlib-1.2.11-4.fc27.i686 @fedora Did these also get pulled in when you installed? -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 29/04/2018 à 04:47, Ed Greshko a écrit : > On 04/28/18 22:30, Ed Greshko wrote: >> So, I suppose, I could say it "works for me". > > > I will add that today I tried running the same program in a VM running GNOME > under > Wayland. > > I was able to start the program, and activate it. However, when starting > after > activation the work window did show but it indicated an error/crash. > > So, it would seem, the program isn't Wayland capable. I use X11 and it crashes I use xfce and I will try to use kde on a vm. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/28/18 22:30, Ed Greshko wrote: > So, I suppose, I could say it "works for me". I will add that today I tried running the same program in a VM running GNOME under Wayland. I was able to start the program, and activate it. However, when starting after activation the work window did show but it indicated an error/crash. So, it would seem, the program isn't Wayland capable. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 28/04/2018 à 16:05, spike a écrit : > On 28.04.2018 14:56, François Patte wrote: >> from the Applications menu: nothing happens >> >> from command line: a splash screen appears, then a little dialog box >> which disappears so quickly that you cannot read anything! >> >> After destroying all (?) files written by the software in .config and >> .cache directories, you may see the splash screen, then an information >> window claiming that an incident happened which has been reported > > Have you tried running > > env --unset=XDG_CURRENT_DESKTOP --unset=DESKTOP_SESSION > "/opt/dassault-systemes/DraftSight/Linux/DraftSight" > Got the splash screen. that's all! -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/28/18 22:04, Ed Greshko wrote: > OK. Rather late in the day for me. Will probably try it tomorrow. Well, I had a bit of time after all. I downloaded the "beta" from the website as mentioned in the original posting. Installed it on a fully updated F27 VM with "dnf install". I then started it from the menu (KDE in my case) and followed the "activation" instructions. After clicking on the link that was sent to me I started the application again and it started and displayed a screen that I've no idea how to use. :-) So, I suppose, I could say it "works for me". I am using KDE in F27 and Xorg. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/28/18 20:56, François Patte wrote: > I tried several times: > > from the Applications menu: nothing happens > > from command line: a splash screen appears, then a little dialog box > which disappears so quickly that you cannot read anything! > > After destroying all (?) files written by the software in .config and > .cache directories, you may see the splash screen, then an information > window claiming that an incident happened which has been reported > > From command line as root, I got that "something wrong happened and the > program was closed". > > That's all I can say > > Maybe someone else could get some other "information" > > As Philip said: nobody never answers to mails sent to the company... OK. Rather late in the day for me. Will probably try it tomorrow. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Ed, On 2018-04-28 22:05, Ed Greshko wrote: On 04/28/18 19:57, Philip Rhoades wrote: François, On 2018-04-28 20:12, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ I've tried the last few versions but with no success and I have tried getting support from the company in a few different locations but they don't respond . . It is supposed to read autocad files (.dwg) Yes, it would be nice if we could get it to work . . You may want to describe what the failure is? Frankly, I was thinking about trying/testing but since no clue other than "doesn't work" is given I decided not to. It was a while ago and I can't remember what the error was (I think it has been the same problem all along) - I haven't got time to look at it again now. I was going to wait until they released another version and have another shot at it then. Since it has come up here now, I will report more detail next time - success or failure . . P. -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: p...@pricom.com.au ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
Le 28/04/2018 à 14:05, Ed Greshko a écrit : > On 04/28/18 19:57, Philip Rhoades wrote: >> François, >> >> >> On 2018-04-28 20:12, François Patte wrote: >>> Bonjour, >>> >>> Does anyone succed to have this software working under fedora 27? >>> >>> https://www.3ds.com/products-services/draftsight-cad-software/free-download/ >> >> >> I've tried the last few versions but with no success and I have tried getting >> support from the company in a few different locations but they don't respond >> . . >> >> >>> It is supposed to read autocad files (.dwg) >> >> >> Yes, it would be nice if we could get it to work . . > > You may want to describe what the failure is? Frankly, I was thinking about > trying/testing but since no clue other than "doesn't work" is given I decided > not to. I tried several times: from the Applications menu: nothing happens from command line: a splash screen appears, then a little dialog box which disappears so quickly that you cannot read anything! After destroying all (?) files written by the software in .config and .cache directories, you may see the splash screen, then an information window claiming that an incident happened which has been reported From command line as root, I got that "something wrong happened and the program was closed". That's all I can say Maybe someone else could get some other "information" As Philip said: nobody never answers to mails sent to the company... -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
On 04/28/18 19:57, Philip Rhoades wrote: > François, > > > On 2018-04-28 20:12, François Patte wrote: >> Bonjour, >> >> Does anyone succed to have this software working under fedora 27? >> >> https://www.3ds.com/products-services/draftsight-cad-software/free-download/ > > > I've tried the last few versions but with no success and I have tried getting > support from the company in a few different locations but they don't respond > . . > > >> It is supposed to read autocad files (.dwg) > > > Yes, it would be nice if we could get it to work . . You may want to describe what the failure is? Frankly, I was thinking about trying/testing but since no clue other than "doesn't work" is given I decided not to. -- Conjecture is just a conclusion based on incomplete information. It isn't a fact. signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight
François, On 2018-04-28 20:12, François Patte wrote: Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ I've tried the last few versions but with no success and I have tried getting support from the company in a few different locations but they don't respond . . It is supposed to read autocad files (.dwg) Yes, it would be nice if we could get it to work . . Phil. Thank you. ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org -- Philip Rhoades PO Box 896 Cowra NSW 2794 Australia E-mail: p...@pricom.com.au ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
draftsight
Bonjour, Does anyone succed to have this software working under fedora 27? https://www.3ds.com/products-services/draftsight-cad-software/free-download/ It is supposed to read autocad files (.dwg) Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Re: draftsight and f27
On Sat, 2018-01-13 at 15:14 +0100, François Patte wrote: > Bonjour, > > I installed draftsight on a previous f25 installation abd it worked well. > > I upgraded to f27 and it is no more working... A splash screen appears, > then nothing happens and the only error message is: > > Could not parse stylesheet of object 0x2b89e90 > > What does it mean and where can I find some help? I see no such package in the standard repos, so start by stating where you got it from. poc ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
draftsight and f27
Bonjour, I installed draftsight on a previous f25 installation abd it worked well. I upgraded to f27 and it is no more working... A splash screen appears, then nothing happens and the only error message is: Could not parse stylesheet of object 0x2b89e90 What does it mean and where can I find some help? Thank you. -- François Patte UFR de mathématiques et informatique Laboratoire CNRS MAP5, UMR 8145 Université Paris Descartes 45, rue des Saints Pères F-75270 Paris Cedex 06 Tél. +33 (0)6 7892 5822 http://www.math-info.univ-paris5.fr/~patte signature.asc Description: OpenPGP digital signature ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org
Draftsight
http://www.3ds.com/it/products/draftsight/download-draftsight/ If you get to this page can you see the different options to download??? I am using latest Firefox 17.0.1 Tnx. -- Antonio M Skype: amontag52 Linux Fedora F17 (Beefy Miracle) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Draftsight
On 1/12/2013 5:38 PM, antonio wrote: http://www.3ds.com/it/products/draftsight/download-draftsight/ If you get to this page can you see the different options to download??? I am using latest Firefox 17.0.1 In Fedora 18 I can get there and no I can not see the download links. However in Windows 7 they are visible below the line reading Start using DraftSight now: . There are d/l links for Win 32, Win 64, Mac and betas for Fedora, Suse, Mandriva (rpm package) and Ubuntu (deb package). If you are seriously interested in this Antonio I would volunteer to download if for you and post a link. Here. Or to you privately. -- David -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Draftsight
On 1/12/2013 6:02 PM, antonio wrote: David ha scritto / said the followingil giorno/on 12/01/2013 23:56: On 1/12/2013 5:38 PM, antonio wrote: http://www.3ds.com/it/products/draftsight/download-draftsight/ If you get to this page can you see the different options to download??? I am using latest Firefox 17.0.1 In Fedora 18 I can get there and no I can not see the download links. However in Windows 7 they are visible below the line reading Start using DraftSight now: . There are d/l links for Win 32, Win 64, Mac and betas for Fedora, Suse, Mandriva (rpm package) and Ubuntu (deb package). If you are seriously interested in this Antonio I would volunteer to download if for you and post a link. Here. Or to you privately. ah, something is wrong in Linux thenI am already using Draftsight as I installed in the past and I could see the download links, now I don't understand why we can see in Windows but not in Linux - I didn't check on my windows machine, but I trust you :-) Something is wrong with the code?? are you using the same release of Firefox?? Tnx for help Sure. No problem. The Firefox that is (will be) in Fedora 18 is 17.0.1 also so yes it is the same one that you have. And it does not work with this site. As a test I just tried the .tar.bz of FF 17.0.1 gotten directly from Mozilla and it does not display the d/l links either. -- David -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Draftsight
David ha scritto / said the followingil giorno/on 13/01/2013 00:20: On 1/12/2013 6:02 PM, antonio wrote: David ha scritto / said the followingil giorno/on 12/01/2013 23:56: On 1/12/2013 5:38 PM, antonio wrote: http://www.3ds.com/it/products/draftsight/download-draftsight/ If you get to this page can you see the different options to download??? I am using latest Firefox 17.0.1 In Fedora 18 I can get there and no I can not see the download links. However in Windows 7 they are visible below the line reading Start using DraftSight now: . There are d/l links for Win 32, Win 64, Mac and betas for Fedora, Suse, Mandriva (rpm package) and Ubuntu (deb package). If you are seriously interested in this Antonio I would volunteer to download if for you and post a link. Here. Or to you privately. ah, something is wrong in Linux thenI am already using Draftsight as I installed in the past and I could see the download links, now I don't understand why we can see in Windows but not in Linux - I didn't check on my windows machine, but I trust you :-) Something is wrong with the code?? are you using the same release of Firefox?? Tnx for help Sure. No problem. The Firefox that is (will be) in Fedora 18 is 17.0.1 also so yes it is the same one that you have. And it does not work with this site. As a test I just tried the .tar.bz of FF 17.0.1 gotten directly from Mozilla and it does not display the d/l links either. we are using the same Firefox, but are you using same Firefox in Windows either?? And what is wrong, as in the past download links were shown as Drafsight is on my machines?? -- Antonio M Skype: amontag52 Linux Fedora F17 (Beefy Miracle) on Acer 5720 http://lugsaronno.altervista.org http://www.campingmonterosa.com -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Draftsight
On 1/12/2013 6:23 PM, antonio wrote: David ha scritto / said the followingil giorno/on 13/01/2013 00:20: On 1/12/2013 6:02 PM, antonio wrote: David ha scritto / said the followingil giorno/on 12/01/2013 23:56: On 1/12/2013 5:38 PM, antonio wrote: http://www.3ds.com/it/products/draftsight/download-draftsight/ If you get to this page can you see the different options to download??? I am using latest Firefox 17.0.1 In Fedora 18 I can get there and no I can not see the download links. However in Windows 7 they are visible below the line reading Start using DraftSight now: . There are d/l links for Win 32, Win 64, Mac and betas for Fedora, Suse, Mandriva (rpm package) and Ubuntu (deb package). If you are seriously interested in this Antonio I would volunteer to download if for you and post a link. Here. Or to you privately. ah, something is wrong in Linux thenI am already using Draftsight as I installed in the past and I could see the download links, now I don't understand why we can see in Windows but not in Linux - I didn't check on my windows machine, but I trust you :-) Something is wrong with the code?? are you using the same release of Firefox?? Tnx for help Sure. No problem. The Firefox that is (will be) in Fedora 18 is 17.0.1 also so yes it is the same one that you have. And it does not work with this site. As a test I just tried the .tar.bz of FF 17.0.1 gotten directly from Mozilla and it does not display the d/l links either. we are using the same Firefox, but are you using same Firefox in Windows either?? And what is wrong, as in the past download links were shown as Drafsight is on my machines?? I am not sure but something is obvioulsy being blocked. The actual link for the Fedora type .rpm is http://www.draftsight.com/download-linux-fedora I just ran an update on the Fedora 18 install and it updates Firefox to 18.0 which is the official release version. It still does not work. I installed the Firefox 18.0 Windows install, the official release, and it displays the d/l icons. I am, and have been for months, using the 'Nightly' Firefox builds, currently 21.a1 and that was the one that I tried when I first replied. A difference that i had not thought of but it appears does not make a difference. I see that you are using TB 17.0 BTW. There was a 17.0.1 bug fix update and the current, official release ia TB 18.0. IIWU? I would consider a post on Bugzilla. -- David -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
On Tuesday, December 06, 2011 03:15:14 PM Richard Shaw wrote: I didn't spend too much time trying to get it to work, it was probably some 32-bit library I was missing. I decided that using an open source program like FreeCAD which includes solid modeling If solid modeling isn't important, there's always QCAD. The fully open source version is included in Fedora, but it's a version behind the 'pro' version that costs a little bit. Just another option; I've used QCAD for a while and like it, but it is definitely 2D only. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Using Draftsight on a 64 bit system
Planning to switch some systems to 64 bit. Is anybody running on a 64 bit system?? What are the tricks to follow?? Tnx Antonio Montagnani Fedora 16 Verne (Linux) Alice webmail -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
R: Re: Using Draftsight on a 64 bit system
Messaggio originale Da: dario.s...@gmail.com Data: 6-dic-2011 16.03 A: antonio.montagn...@alice.it, Community support for Fedora users Ogg: Re: Using Draftsight on a 64 bit system Is anybody running on a 64 bit system?? I am... What are the tricks to follow?? like what?, cos all you really need to figure out is if your programs have a 64bit version... Tnx Are you using Draftsight (that is 32 bit application) on your 64 bit system?? -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
On Tue, Dec 6, 2011 at 8:53 AM, antonio.montagn...@alice.it antonio.montagn...@alice.it wrote: Planning to switch some systems to 64 bit. Is anybody running on a 64 bit system?? What are the tricks to follow?? I tried DraftSight many months ago while I was still running Fedora 14 x86_64 but never got it to run. I'm working on packaging FreeCAD[1]*** on RPM Fusion, however, it's a full solid modeling CAD, not just 2D. I'd be interested in beta-testers though. Richard [1] https://sourceforge.net/apps/mediawiki/free-cad/index.php?title=Main_Page *** Disclaimer: While FreeCAD itself it GPLv2+/LGPLv2+ licensed, it uses OpenCascasde which is non-free due to it's license, so FreeCAD if/when approved will have to go into the RPM Fusion non-free repository. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
Is anybody running on a 64 bit system?? I am... What are the tricks to follow?? like what?, cos all you really need to figure out is if your programs have a 64bit version... Tnx Antonio Montagnani Fedora 16 Verne (Linux) Alice webmail -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org -- OS: http://fedoraproject.org/es/ - http://www.linuxmint.com/ Graficos: http://www.blender.org - http://www.gimp.org Musica: http://www.jamendo.com - http://www.openoctave.org/ Recetas: http://www.recetas-sencillas.com/ - Politica: http://www.fsfla.org/svnwiki/ - http://www.gnu.org/ -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
On Tuesday, December 06, 2011 10:03:41 AM Richard Shaw wrote: I tried DraftSight many months ago while I was still running Fedora 14 x86_64 but never got it to run. I'm running Draftsight on F14 x86_64 now; it seems to work fine. I don't recall having to do anything particularly special, but it has been a while since I installed it. -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
On Tue, Dec 6, 2011 at 1:05 PM, Lamar Owen lo...@pari.edu wrote: On Tuesday, December 06, 2011 10:03:41 AM Richard Shaw wrote: I tried DraftSight many months ago while I was still running Fedora 14 x86_64 but never got it to run. I'm running Draftsight on F14 x86_64 now; it seems to work fine. I don't recall having to do anything particularly special, but it has been a while since I installed it. I didn't spend too much time trying to get it to work, it was probably some 32-bit library I was missing. I decided that using an open source program like FreeCAD which includes solid modeling (even if it uses some non-free components) is still better than using something completely proprietary. Richard -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
Re: Using Draftsight on a 64 bit system
you can also do ldd $(which draftsight) and see the missing libraries. Then do sudo yum whatprovides for each missing lib. Em Ter, 2011-12-06 às 14:15 -0600, Richard Shaw escreveu: On Tue, Dec 6, 2011 at 1:05 PM, Lamar Owen lo...@pari.edu wrote: On Tuesday, December 06, 2011 10:03:41 AM Richard Shaw wrote: I tried DraftSight many months ago while I was still running Fedora 14 x86_64 but never got it to run. I'm running Draftsight on F14 x86_64 now; it seems to work fine. I don't recall having to do anything particularly special, but it has been a while since I installed it. I didn't spend too much time trying to get it to work, it was probably some 32-bit library I was missing. I decided that using an open source program like FreeCAD which includes solid modeling (even if it uses some non-free components) is still better than using something completely proprietary. Richard -- users mailing list users@lists.fedoraproject.org To unsubscribe or change subscription options: https://admin.fedoraproject.org/mailman/listinfo/users Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines Have a question? Ask away: http://ask.fedoraproject.org
