Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
Il 01/10/2014 02:42, Nir Soffer ha scritto: - Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Tuesday, September 30, 2014 5:46:15 PM Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go Il 29/09/2014 08:34, Sandro Bonazzola ha scritto: Hi, We were supposed to start composing oVirt 3.5.0 GA today 2014-09-29 but we still have 3 blockers. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC3 tag. - Please provide ETA for new blockers for rescheduling an RC4 and a GA release. The bug tracker [1] shows 3 blockers: Bug ID Whiteboard Status Summary 1147085 storage POSTMemory volumes not deleted when removing a vm with snapshots 1146073 sla POSTFailing to Attach a Storage Domain without Disk Profiles to a Data Center 3.5 1127460 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage Today we have: Bug ID Whiteboard Status Summary 1127460 storage POSTVM abnormal stop after LV refreshing when using thin provisioning on block storage Basically this is an issue with systemd, not with ovirt. However we have a workaround that we can consume in the short term. Patch for RHEL7: http://gerrit.ovirt.org/33492 We believe that we can get the real fix for the underlying component for Fedora quickly. If not, we have a patch ready for enabling the workaround on Fedora. Patch for Fedora: http://http://gerrit.ovirt.org/33555 Just to be sure, what happens if the workaround is in place and the fix on systemd is provided? If everything still continue to work, please merge both patches on 3.5 and move the bug to modified so we can try to start composing RC4 as soon as the following is closed too: 1147971 storage NEW Snapshot locked after successful live storage migration This is an ifra issue, handled by Ravi. ETA? Dan? I've seen it has been moved to POST and infra. Can we get it verified and moved to modified in a couple of hours? Nir -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] outage: www.ovirt.org was down
fyi, www.ovirt.org was down and is now back up. actions taken: - ctl_app restart (restarted php mysql services). cause: - couldn't find an older mysql.log with errors.. michael - can you assist debugging the cause of this downtime? Eyal. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
- Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Tuesday, September 30, 2014 5:46:15 PM Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go Il 29/09/2014 08:34, Sandro Bonazzola ha scritto: Hi, We were supposed to start composing oVirt 3.5.0 GA today 2014-09-29 but we still have 3 blockers. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC3 tag. - Please provide ETA for new blockers for rescheduling an RC4 and a GA release. The bug tracker [1] shows 3 blockers: Bug ID Whiteboard Status Summary 1147085 storage POSTMemory volumes not deleted when removing a vm with snapshots 1146073 sla POSTFailing to Attach a Storage Domain without Disk Profiles to a Data Center 3.5 1127460 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage Today we have: Bug IDWhiteboard Status Summary 1127460 storage POSTVM abnormal stop after LV refreshing when using thin provisioning on block storage The proposed VDSM patch should work, but it does not resolve the situation properly wrt selinux. A proper fix should be provided to the underlying layers (see BZ 1147923 for EL and BZ 1147910 for Fedora). I'd like to hear more voices here, but IMHO, not supporting enabled selinux envs on EL7/F20 is a no-go for GA. 1147971 storage NEW Snapshot locked after successful live storage migration This bug requires two (simple) patches, both of which are acked and verified on upstream/master. I think they can be backported and merged by EOD, unless Daniel or Ravi (the respective patch authors) see a problem I don't. ETA? The following bugs are keyworded as Regression and not marked as blockers[10] Bug ID Whiteboard Status Summary 1142647 gluster NEW supervdsm leaks memory when using glusterfs 1138144 storage NEW Failed to autorecover storage domain after unblocking connection with host We're unable to confirm this issue (seems as though it's caused by a bug that was there since 3.1, at least). It's targeted for 3.5.1, and should not block the GA. 1147085 storage POSTMemory volumes not deleted when removing a vm with snapshots This is already MODIFIED. 1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError This is an edge case of an edge case. Although this technically is a regression, there's no real-world situation that would lead to this, and it should not block 3.5.0 Feature freeze is now effective, and branch has been created. All new patches must be backported to 3.5 branch too. Features completed are marked in green on Features Status Table [2] There are still 69 bugs [3] targeted to 3.5.0. Excluding node and documentation bugs we still have 46 bugs [4] targeted to 3.5.0. More in detail [5]: Whiteboard NEW ASSIGNEDPOSTTotal docs13 1 0 14 gluster 4 0 2 6 i18n0 0 1 1 infra 1 0 0 1 integration 0 0 1 1 node9 4 0 13 ppc 2 0 4 6 sla 10 0 3 13 storage 2 1 3 6 I did some scrubbing here. The only two remaining storage issues are the ones mentioned above, that are indeed blockers. virt3 1 4 8 Total 44 7 18 69 Maintainers / Assignee: - Please ensure that completed features are marked in green on Features Status Table [2] - If you find a blocker bug please remember to add it to the tracker [1] - Please fill release notes, the page has been created here [6] - Please review results from Third Test Day on the etherpad [7] and on the mailing lists - Please update the target to 3.5.1 or later for bugs that won't be in 3.5.0: it will ease gathering the blocking bugs for next releases. Community: - You're welcome to join us testing last release candidate or nightly builds and getting involved in oVirt Quality Assurance[8] [1] http://bugzilla.redhat.com/1073943
[ovirt-users] API -- Do I need to use templates? Can I change network for the nic?
Hi, Trying to remotely spawn a large amount of VM's. It would appear I can only use templates...which would have a NIC stuck to one network vlan. It doesn't appear that I can change that vlan remotely. Is there any easy way I can get this done? Thanks, Morgan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] API -- Do I need to use templates? Can I change network for the nic?
Hi Morgan, I'm not sure if you want all VMs to use the same network or not. If you do, the best way would be to create a template with one interface, and the relevant network (profile) attached. If you want certain VMs to be connected to other networks, once you create the VM you can send a PUT request on /api/vms/{id}/nics/{id}/ and update it with the relevant network (profile). Hope this helps! Let us know please :) Yours, Lior. On 01/10/14 10:32, Morgan McLean wrote: Hi, Trying to remotely spawn a large amount of VM's. It would appear I can only use templates...which would have a NIC stuck to one network vlan. It doesn't appear that I can change that vlan remotely. Is there any easy way I can get this done? Thanks, Morgan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] engine-backup
Hello List, i am trying to restore my ovirt-engine on a fresh installed machine. I followed: http://www.ovirt.org/Ovirt-engine-backup So i did: - yum install ovirt-engine - engine-setup - engine-cleanup su - postgres -c createdb -U postgres engine as postgres i also set my original passwort for the engine postgres user: alter role engine ENCRYPTED PASSWORD 'foo\bar'; My Restore Command was: engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password [root@ovirt ~]# engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password Enter Engine database password: Preparing to restore: - Setting credentials for Engine database 'engine' - Unpacking file 'backup' Restoring: - Files - Engine database 'engine' FATAL: Errors while restoring database engine ... SET CREATE TABLE ALTER TABLE CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_for_search does not exist ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_with_hosts_view does not exist CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fnsplitteruuid(text) does not exist ZEILE 2: (SELECT users.user_id, fnsplitteruuid(users.group_ids) A... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. Any ideas what i did wrong and why it wont restore the DB? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] engine-backup
- Original Message - From: ml ml mliebher...@googlemail.com To: users@ovirt.org Sent: Wednesday, October 1, 2014 12:07:59 PM Subject: [ovirt-users] engine-backup Hello List, i am trying to restore my ovirt-engine on a fresh installed machine. I followed: http://www.ovirt.org/Ovirt-engine-backup So i did: - yum install ovirt-engine - engine-setup - engine-cleanup su - postgres -c createdb -U postgres engine Should be : su - postgres -c psql -d template1 -c \create database engine owner engine;\ please do : dropdb -U postgres engine and retry using the above command for db creation as postgres i also set my original passwort for the engine postgres user: alter role engine ENCRYPTED PASSWORD 'foo\bar'; My Restore Command was: engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password [root@ovirt ~]# engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password Enter Engine database password: Preparing to restore: - Setting credentials for Engine database 'engine' - Unpacking file 'backup' Restoring: - Files - Engine database 'engine' FATAL: Errors while restoring database engine ... SET CREATE TABLE ALTER TABLE CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_for_search does not exist ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_with_hosts_view does not exist CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fnsplitteruuid(text) does not exist ZEILE 2: (SELECT users.user_id, fnsplitteruuid(users.group_ids) A... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. Any ideas what i did wrong and why it wont restore the DB? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Updated Event Invitation: Deep Dive 3.5.0 - SLA Resource Capping
BEGIN:VCALENDAR PRODID:-//Mozilla.org/NONSGML Mozilla Calendar V1.1//EN VERSION:2.0 METHOD:REQUEST BEGIN:VTIMEZONE TZID:Asia/Jerusalem X-LIC-LOCATION:Asia/Jerusalem BEGIN:DAYLIGHT TZOFFSETFROM:+0200 TZOFFSETTO:+0300 TZNAME:IDT DTSTART:20130329T02 RRULE:FREQ=YEARLY;BYDAY=FR;BYMONTHDAY=23,24,25,26,27,28,29;BYMONTH=3 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+0300 TZOFFSETTO:+0200 TZNAME:IST DTSTART:20131027T02 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 END:STANDARD BEGIN:STANDARD TZOFFSETFROM:+022054 TZOFFSETTO:+022040 TZNAME:JMT DTSTART:18800101T00 RDATE;VALUE=DATE-TIME:18800101T00 END:STANDARD BEGIN:STANDARD TZOFFSETFROM:+022040 TZOFFSETTO:+0200 TZNAME:IST DTSTART:19180101T00 RDATE;VALUE=DATE-TIME:19180101T00 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+0200 TZOFFSETTO:+0300 TZNAME:IDT DTSTART:19400601T00 RDATE;VALUE=DATE-TIME:19400601T00 RDATE;VALUE=DATE-TIME:19430401T02 RDATE;VALUE=DATE-TIME:19440401T00 RDATE;VALUE=DATE-TIME:19450416T00 RDATE;VALUE=DATE-TIME:19460416T02 RDATE;VALUE=DATE-TIME:19490501T00 RDATE;VALUE=DATE-TIME:19500416T00 RDATE;VALUE=DATE-TIME:19510401T00 RDATE;VALUE=DATE-TIME:19520420T02 RDATE;VALUE=DATE-TIME:19530412T02 RDATE;VALUE=DATE-TIME:19540613T00 RDATE;VALUE=DATE-TIME:19550611T02 RDATE;VALUE=DATE-TIME:19560603T00 RDATE;VALUE=DATE-TIME:19570429T02 RDATE;VALUE=DATE-TIME:19740707T00 RDATE;VALUE=DATE-TIME:19750420T00 RDATE;VALUE=DATE-TIME:19850414T00 RDATE;VALUE=DATE-TIME:19860518T00 RDATE;VALUE=DATE-TIME:19870415T00 RDATE;VALUE=DATE-TIME:19880410T00 RDATE;VALUE=DATE-TIME:19890430T00 RDATE;VALUE=DATE-TIME:19900325T00 RDATE;VALUE=DATE-TIME:19910324T00 RDATE;VALUE=DATE-TIME:19920329T00 RDATE;VALUE=DATE-TIME:19930402T00 RDATE;VALUE=DATE-TIME:19940401T00 RDATE;VALUE=DATE-TIME:19950331T00 RDATE;VALUE=DATE-TIME:19960315T00 RDATE;VALUE=DATE-TIME:19970321T00 RDATE;VALUE=DATE-TIME:19980320T00 RDATE;VALUE=DATE-TIME:19990402T02 RDATE;VALUE=DATE-TIME:2414T02 RDATE;VALUE=DATE-TIME:20010409T01 RDATE;VALUE=DATE-TIME:20020329T01 RDATE;VALUE=DATE-TIME:20030328T01 RDATE;VALUE=DATE-TIME:20040407T01 RDATE;VALUE=DATE-TIME:20050401T02 RDATE;VALUE=DATE-TIME:20060331T02 RDATE;VALUE=DATE-TIME:20070330T02 RDATE;VALUE=DATE-TIME:20080328T02 RDATE;VALUE=DATE-TIME:20090327T02 RDATE;VALUE=DATE-TIME:20100326T02 RDATE;VALUE=DATE-TIME:20110401T02 RDATE;VALUE=DATE-TIME:20120330T02 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+0300 TZOFFSETTO:+0200 TZNAME:IST DTSTART:19421101T00 RDATE;VALUE=DATE-TIME:19421101T00 RDATE;VALUE=DATE-TIME:19431101T00 RDATE;VALUE=DATE-TIME:19441101T00 RDATE;VALUE=DATE-TIME:19451101T02 RDATE;VALUE=DATE-TIME:19461101T00 RDATE;VALUE=DATE-TIME:19481101T02 RDATE;VALUE=DATE-TIME:19491101T02 RDATE;VALUE=DATE-TIME:19500915T03 RDATE;VALUE=DATE-TIME:1951T03 RDATE;VALUE=DATE-TIME:19521019T03 RDATE;VALUE=DATE-TIME:19530913T03 RDATE;VALUE=DATE-TIME:19540912T00 RDATE;VALUE=DATE-TIME:19550911T00 RDATE;VALUE=DATE-TIME:19560930T03 RDATE;VALUE=DATE-TIME:19570922T00 RDATE;VALUE=DATE-TIME:19741013T00 RDATE;VALUE=DATE-TIME:19750831T00 RDATE;VALUE=DATE-TIME:19850915T00 RDATE;VALUE=DATE-TIME:19860907T00 RDATE;VALUE=DATE-TIME:19870913T00 RDATE;VALUE=DATE-TIME:19880904T00 RDATE;VALUE=DATE-TIME:19890903T00 RDATE;VALUE=DATE-TIME:19900826T00 RDATE;VALUE=DATE-TIME:19910901T00 RDATE;VALUE=DATE-TIME:19920906T00 RDATE;VALUE=DATE-TIME:19930905T00 RDATE;VALUE=DATE-TIME:19940828T00 RDATE;VALUE=DATE-TIME:19950903T00 RDATE;VALUE=DATE-TIME:19960916T00 RDATE;VALUE=DATE-TIME:19970914T00 RDATE;VALUE=DATE-TIME:19980906T00 RDATE;VALUE=DATE-TIME:19990903T02 RDATE;VALUE=DATE-TIME:20001006T01 RDATE;VALUE=DATE-TIME:20010924T01 RDATE;VALUE=DATE-TIME:20021007T01 RDATE;VALUE=DATE-TIME:20031003T01 RDATE;VALUE=DATE-TIME:20040922T01 RDATE;VALUE=DATE-TIME:20051009T02 RDATE;VALUE=DATE-TIME:20061001T02 RDATE;VALUE=DATE-TIME:20070916T02 RDATE;VALUE=DATE-TIME:20081005T02 RDATE;VALUE=DATE-TIME:20090927T02 RDATE;VALUE=DATE-TIME:20100912T02 RDATE;VALUE=DATE-TIME:20111002T02 RDATE;VALUE=DATE-TIME:20120923T02 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+0200 TZOFFSETTO:+0400 TZNAME:IDDT DTSTART:19480523T00 RDATE;VALUE=DATE-TIME:19480523T00 END:DAYLIGHT BEGIN:DAYLIGHT TZOFFSETFROM:+0400 TZOFFSETTO:+0300 TZNAME:IDT DTSTART:19480901T00 RDATE;VALUE=DATE-TIME:19480901T00 END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT LAST-MODIFIED:20141001T091722Z DTSTAMP:20141001T091722Z UID:b622ce76-3a58-4862-81ca-17a23bb1e4d2 SUMMARY:Deep Dive 3.5.0 - SLA Resource Capping STATUS:CONFIRMED ORGANIZER;CN=Roy Golan;SENT-BY=mailto:rgo...@redhat.com:mailto:rgolan@re dhat.com ATTENDEE;RSVP=TRUE;PARTSTAT=NEEDS-ACTION;ROLE=REQ-PARTICIPANT:mailto:devel @ovirt.org
Re: [ovirt-users] engine-backup
Thanks, that did the trick. Its mentioned in the engine-backup --help dialog. But maybe we should add it to the http://www.ovirt.org/Ovirt-engine-backup page, too? On Wed, Oct 1, 2014 at 11:16 AM, Eli Mesika emes...@redhat.com wrote: - Original Message - From: ml ml mliebher...@googlemail.com To: users@ovirt.org Sent: Wednesday, October 1, 2014 12:07:59 PM Subject: [ovirt-users] engine-backup Hello List, i am trying to restore my ovirt-engine on a fresh installed machine. I followed: http://www.ovirt.org/Ovirt-engine-backup So i did: - yum install ovirt-engine - engine-setup - engine-cleanup su - postgres -c createdb -U postgres engine Should be : su - postgres -c psql -d template1 -c \create database engine owner engine;\ please do : dropdb -U postgres engine and retry using the above command for db creation as postgres i also set my original passwort for the engine postgres user: alter role engine ENCRYPTED PASSWORD 'foo\bar'; My Restore Command was: engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password [root@ovirt ~]# engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password Enter Engine database password: Preparing to restore: - Setting credentials for Engine database 'engine' - Unpacking file 'backup' Restoring: - Files - Engine database 'engine' FATAL: Errors while restoring database engine ... SET CREATE TABLE ALTER TABLE CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_for_search does not exist ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_with_hosts_view does not exist CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fnsplitteruuid(text) does not exist ZEILE 2: (SELECT users.user_id, fnsplitteruuid(users.group_ids) A... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. Any ideas what i did wrong and why it wont restore the DB? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
Hello List, i have just tried to backup and replace my ovirt-engine. My ovir-engine also provides the NFS share for the ISO Images. However, if i take that nfs share away my ovirt-nodes and cluster seems to fall apart. I get those typical NFS stale file handle symthoms. I can not umount or remount the NFS dirs anymore. Any idea how i can fix this or better: protect myself from such an NFS failure? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [New Documentation] oVirt Administrator's Guide (Please Review!)
Hello Brian, great work! Thank you.NowI do not need to refer to RHEV docs any more;) On 01.10.2014 03:01, Brian Proffitt wrote: After several weeks of conversion and updating, I would like to announce the posting of a new page on the oVirt site: the oVirt Administrator's Guide[1]. This guide, adapted to MediaWiki form with the help of Red Hat's Content Services team, should be up to date as of oVirt 3.4. Given the impending release of oVirt 3.5, I invite everyone to take start poking at this documentation once oVirt 3.5 is released and people get familiar with the new release to identify procedures that have changed, and new features that must be added. Please use Bugzilla to assign bugs in this document to me. Up next: an oVirt User's Guide that focuses on the User Portal, followed by a revised Quick Start Guide. Eventually, we hope to have more dedicated resources devoted to oVirt's documentation, and this new set of documents will be a good starting point. [1] http://www.ovirt.org/OVirt_Administration_Guide Peace, Brian -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [hosted-engine-ha] restart-loop
Hello Jirka, On 01.10.2014 09:10, Jiri Moskovcak wrote: Hi Daniel, from the logs it seems like you ran into [1]. It should be fixed in ovirt-hosted-engine-ha-1.1.5 (part of oVirt 3.4.2). I am running 3.4.4 - and from hosted-engine --vm-status both hosts had a score of 2400... --Jirka [1] https://bugzilla.redhat.com/show_bug.cgi?id=1093366 On 09/27/2014 12:40 PM, Daniel Helgenberger wrote: Hello, before filing a BZ against 3.4 branch I wanted to get some input on the following issue: Steps, root shell on one engine-ha hosts, using hosted-engine cmd: 1. set global maintenance 2. shutdown hosted-engine vm (do some work) 3. disable global maintenance Result: My engine was started and immediately powered down again, in a loop. I could only manually brake this with: 1. enable global mt. gain 2. start engine 3. disable global mt. I attached the hosts' engine-ha broker logs as well as agent logs, from today 12:00 to 12:27, right after I 'fixed' this. Note, the engine was started on nodehv02 automatically after i disabled global mt. @ about 12:05 Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ?3.4: VDSM Memory consumption
On 30.09.2014 17:09, Sandro Bonazzola wrote: Il 30/09/2014 17:03, Dan Kenigsberg ha scritto: On Tue, Sep 30, 2014 at 10:23:47AM +, Daniel Helgenberger wrote: On 30.09.2014 11:57, Piotr Kliczewski wrote: - Original Message - From: Daniel Helgenberger daniel.helgenber...@m-box.de To: Piotr Kliczewski pklic...@redhat.com, Dan Kenigsberg dan...@redhat.com Cc: Francesco Romani from...@redhat.com, users@ovirt.org Sent: Tuesday, September 30, 2014 11:50:28 AM Subject: Re: [ovirt-users]?3.4: VDSM Memory consumption Hello Piotr, On 30.09.2014 08:37, Piotr Kliczewski wrote: - Original Message - From: Dan Kenigsberg dan...@redhat.com To: Daniel Helgenberger daniel.helgenber...@m-box.de, pklic...@redhat.com Cc: Francesco Romani from...@redhat.com, users@ovirt.org Sent: Tuesday, September 30, 2014 1:11:42 AM Subject: Re: [ovirt-users]?3.4: VDSM Memory consumption On Mon, Sep 29, 2014 at 09:02:19PM +, Daniel Helgenberger wrote: Hello Francesco, -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv On 29.09.2014, at 22:19, Francesco Romani from...@redhat.com wrote: - Original Message - From: Daniel Helgenberger daniel.helgenber...@m-box.de To: Francesco Romani from...@redhat.com Cc: Dan Kenigsberg dan...@redhat.com, users@ovirt.org Sent: Monday, September 29, 2014 2:54:13 PM Subject: Re: [ovirt-users]3.4: VDSM Memory consumption Hello Francesco, On 29.09.2014 13:55, Francesco Romani wrote: - Original Message - From: Daniel Helgenberger daniel.helgenber...@m-box.de To: Dan Kenigsberg dan...@redhat.com Cc: users@ovirt.org Sent: Monday, September 29, 2014 12:25:22 PM Subject: Re: [ovirt-users]3.4: VDSM Memory consumption Dan, I just reply to the list since I do not want to clutter BZ: While migrating VMs is easy (and the sampling is already running), can someone tell me the correct polling port to block with iptables? Thanks, Hi Daniel, there is indeed a memory profiling patch under discussion: http://gerrit.ovirt.org/#/c/32019/ but for your case we'll need a backport to 3.4.x and clearer install instructions, which I'll prepare as soon as possible. I updated the BZ (and are now blocking 54321/tcp on one of my hosts). and verified it is not reachable. As general info: This system I am using is my LAB / Test / eval setup for a final deployment for ovirt (then 3.5) in production; so it will go away some time in the future (a few weeks / months). If I am the only one experiencing this problem then you might be better of allocating resources elsewhere ;) Thanks for your understanding :) Unfortunately it is true that developer resources aren't so abundant, but it is also true that memleaks should never be discarded easily and without due investigation, considering the nature and the role of VDSM. So, I'm all in for further investigation regarding this issue. As for your question: if I understood correctly what you are asking (still catching up the thread), if you are trying to rule out the stats polling made by Engine to this bad leak, one simple way to test is just to shutdown Engine, and let VDSMs run unguarded on hypervisors. You'll be able to command these VDSMs using vdsClient or restarting Engine. As I said in my BZ comment this is not an option right now, but if understand the matter correctly IPTABLES reject should ultimately do the same? Definitely yes! Just do whatever it is more convenient for you. As you might have already seen in the BZ comment the leak stopped after blocking the port. Though this is clearly no permanent option - please let me know if I can be of any more assistance! The immediate suspect in this situation is M2Crypto. Could you verify that by re-opening the firewall and setting ssl=False in vdsm.conf? You should disable ssl on Engine side and restart both Engine and Vdsm (too bad I do not recall how that's done on Engine: Piotr, can you help?). In vdc_options table there is option EncryptHostCommunication. Please confirm the following procedure is correct: 1. Change Postgres table value: # sudo -u postgres psql -U postgres engine -c update vdc_options set option_value = 'false' where option_name = 'EncryptHostCommunication'; engine=# SELECT * from vdc_options where option_name='EncryptHostCommunication'; option_id | option_name| option_value | version ---+--+--+- 335 | EncryptHostCommunication | false| general (1 row) 2. Restart engine 3. On the hosts; grep ssl /etc/vdsm/vdsm.conf #ssl = true ssl = false 4. restart VDSM I assume I have to set 'ssl = false' this on on all hosts? Please to set it to false and restart the engine. I believe that you need to update a bit more on vdsm side. Please follow [1] section Configure
Re: [ovirt-users] [hosted-engine-ha] restart-loop
On 10/01/2014 01:17 PM, Daniel Helgenberger wrote: Hello Jirka, On 01.10.2014 09:10, Jiri Moskovcak wrote: Hi Daniel, from the logs it seems like you ran into [1]. It should be fixed in ovirt-hosted-engine-ha-1.1.5 (part of oVirt 3.4.2). I am running 3.4.4 - and from hosted-engine --vm-status both hosts had a score of 2400... - doesn't seem like it from the logs, I can see the transition from EngineStart to EngineUp and directly to EngineUpBadHealth, if you have the latest version it should go to the EngineStarting before it's EngineUp, are you sure you've restarted the services (broker and agent) after update? Please provide output of rpm -q ovirt-hosted-engine-ha. Thanks, Jirka --Jirka [1] https://bugzilla.redhat.com/show_bug.cgi?id=1093366 On 09/27/2014 12:40 PM, Daniel Helgenberger wrote: Hello, before filing a BZ against 3.4 branch I wanted to get some input on the following issue: Steps, root shell on one engine-ha hosts, using hosted-engine cmd: 1. set global maintenance 2. shutdown hosted-engine vm (do some work) 3. disable global maintenance Result: My engine was started and immediately powered down again, in a loop. I could only manually brake this with: 1. enable global mt. gain 2. start engine 3. disable global mt. I attached the hosts' engine-ha broker logs as well as agent logs, from today 12:00 to 12:27, right after I 'fixed' this. Note, the engine was started on nodehv02 automatically after i disabled global mt. @ about 12:05 Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
Hello Mario, you can set the ISO_DOMAIN to maintenance and then detach it from the cluster. All nodes will umount this NFS share when detaching it. You can do your backup etc. regards Michael Am 01.10.2014 um 12:50 schrieb ml ml: Hello List, i have just tried to backup and replace my ovirt-engine. My ovir-engine also provides the NFS share for the ISO Images. However, if i take that nfs share away my ovirt-nodes and cluster seems to fall apart. I get those typical NFS stale file handle symthoms. I can not umount or remount the NFS dirs anymore. Any idea how i can fix this or better: protect myself from such an NFS failure? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users mkeller@psi.de-certificate-1.pem Description: Binary data smime.p7s Description: S/MIME cryptographic signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] engine-backup
- Original Message - From: ml ml mliebher...@googlemail.com To: Eli Mesika emes...@redhat.com Cc: users@ovirt.org Sent: Wednesday, October 1, 2014 12:54:13 PM Subject: Re: [ovirt-users] engine-backup Thanks, that did the trick. Its mentioned in the engine-backup --help dialog. But maybe we should add it to the http://www.ovirt.org/Ovirt-engine-backup page, too? I have added the correct empty DB creation command to the wiki page. On Wed, Oct 1, 2014 at 11:16 AM, Eli Mesika emes...@redhat.com wrote: - Original Message - From: ml ml mliebher...@googlemail.com To: users@ovirt.org Sent: Wednesday, October 1, 2014 12:07:59 PM Subject: [ovirt-users] engine-backup Hello List, i am trying to restore my ovirt-engine on a fresh installed machine. I followed: http://www.ovirt.org/Ovirt-engine-backup So i did: - yum install ovirt-engine - engine-setup - engine-cleanup su - postgres -c createdb -U postgres engine Should be : su - postgres -c psql -d template1 -c \create database engine owner engine;\ please do : dropdb -U postgres engine and retry using the above command for db creation as postgres i also set my original passwort for the engine postgres user: alter role engine ENCRYPTED PASSWORD 'foo\bar'; My Restore Command was: engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password [root@ovirt ~]# engine-backup --mode=restore --file=backup --log=LOG_FILE --change-db-credentials --db-host=localhost --db-user=engine --db-name=engine --db-password Enter Engine database password: Preparing to restore: - Setting credentials for Engine database 'engine' - Unpacking file 'backup' Restoring: - Files - Engine database 'engine' FATAL: Errors while restoring database engine ... SET CREATE TABLE ALTER TABLE CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_for_search does not exist ERROR: function fn_get_disk_commited_value_by_storage(uuid) does not exist ZEILE 2: ...disk_size, storage_domain_dynamic.used_disk_size, fn_get_dis... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. ERROR: relation public.storage_domains_with_hosts_view does not exist CREATE VIEW ALTER TABLE CREATE VIEW ALTER TABLE ERROR: function fnsplitteruuid(text) does not exist ZEILE 2: (SELECT users.user_id, fnsplitteruuid(users.group_ids) A... ^ TIP: No function matches the given name and argument types. You might need to add explicit type casts. Any ideas what i did wrong and why it wont restore the DB? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
Hello Michael, On Wed, Oct 1, 2014 at 1:39 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, you can set the ISO_DOMAIN to maintenance and then detach it from the cluster. All nodes will umount this NFS share when detaching it. You can do your backup etc. unfortunatelly this does not help if my ovirt-engine dies over sudden. If i turn of my ovirt-engine the NFS ISO Domain goes down and i can not set it to maintaince mode anymore. Any other ideas? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [hosted-engine-ha] restart-loop
On 01.10.2014 13:33, Jiri Moskovcak wrote: On 10/01/2014 01:17 PM, Daniel Helgenberger wrote: Hello Jirka, On 01.10.2014 09:10, Jiri Moskovcak wrote: Hi Daniel, from the logs it seems like you ran into [1]. It should be fixed in ovirt-hosted-engine-ha-1.1.5 (part of oVirt 3.4.2). I am running 3.4.4 - and from hosted-engine --vm-status both hosts had a score of 2400... - doesn't seem like it from the logs, I can see the transition from EngineStart to EngineUp and directly to EngineUpBadHealth, if you have the latest version it should go to the EngineStarting before it's EngineUp, are you sure you've restarted the services (broker and agent) after update? Please provide output of rpm -q ovirt-hosted-engine-ha. here you go: rpm -q ovirt-hosted-engine-ha ovirt-hosted-engine-ha-1.1.5-1.el6.noarch also, I upgraded to 3.4.3 prior to 3.4.4. I cannot recall whatevter I restarted ovirt-ha-agent; but it is highly likely. Here system reboots after kernel updates: reboot system boot 2.6.32-431.29.2. Tue Sep 30 21:46 - 14:36 (16:50) reboot system boot 2.6.32-431.29.2. Mon Sep 29 12:19 - 21:44 (1+09:24) reboot system boot 2.6.32-431.29.2. Fri Sep 12 08:47 - 12:17 (17+03:30) reboot system boot 2.6.32-431.20.3. Mon Sep 1 17:48 - 08:44 (10+14:56) Thanks, Jirka --Jirka [1] https://bugzilla.redhat.com/show_bug.cgi?id=1093366 On 09/27/2014 12:40 PM, Daniel Helgenberger wrote: Hello, before filing a BZ against 3.4 branch I wanted to get some input on the following issue: Steps, root shell on one engine-ha hosts, using hosted-engine cmd: 1. set global maintenance 2. shutdown hosted-engine vm (do some work) 3. disable global maintenance Result: My engine was started and immediately powered down again, in a loop. I could only manually brake this with: 1. enable global mt. gain 2. start engine 3. disable global mt. I attached the hosts' engine-ha broker logs as well as agent logs, from today 12:00 to 12:27, right after I 'fixed' this. Note, the engine was started on nodehv02 automatically after i disabled global mt. @ about 12:05 Thanks ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
Hello Mario, do it before you turn of your engine and leave it detached, because normally it is not needed all the time. Or create a new ISO_DOMAIN storage at a more save place. Regards Michael Am 01.10.2014 um 14:21 schrieb ml ml: Hello Michael, On Wed, Oct 1, 2014 at 1:39 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, you can set the ISO_DOMAIN to maintenance and then detach it from the cluster. All nodes will umount this NFS share when detaching it. You can do your backup etc. unfortunatelly this does not help if my ovirt-engine dies over sudden. If i turn of my ovirt-engine the NFS ISO Domain goes down and i can not set it to maintaince mode anymore. Any other ideas? mkeller@psi.de-certificate-1.pem Description: Binary data smime.p7s Description: S/MIME cryptographic signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
Hello Michael, this cant be the answer. Maybe NFS is the wrong tool for the wrong purpose in this case then. I am talking about disaster recovery, but you only have soft failures in mind. On Wed, Oct 1, 2014 at 2:40 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, do it before you turn of your engine and leave it detached, because normally it is not needed all the time. Or create a new ISO_DOMAIN storage at a more save place. Regards Michael Am 01.10.2014 um 14:21 schrieb ml ml: Hello Michael, On Wed, Oct 1, 2014 at 1:39 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, you can set the ISO_DOMAIN to maintenance and then detach it from the cluster. All nodes will umount this NFS share when detaching it. You can do your backup etc. unfortunatelly this does not help if my ovirt-engine dies over sudden. If i turn of my ovirt-engine the NFS ISO Domain goes down and i can not set it to maintaince mode anymore. Any other ideas? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Falsely detected network device status
Hi All, I've encountered a network device that is being falsely detected as down. On adding a new network to a 3.4 hosted engine, one of the two hosts is displaying a component interface as down with the webadmin console. Ethtool confirms the link status as up and connectivity through the corresponding interfaces of the network has been proven. Shortly after adding the network I noted that the node with the falsely detected iface status, was set Non-Operational. All running VM's evacuated. The engine.log showing... INFO [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (DefaultQuartzScheduler_Worker-33) [2daa7788] Correlation ID: null, Call Stack: null, Custom Event ID: -1, Message: Host hosted_engine_2 moved to Non-Operational state because interfaces 'eth1' are down but are needed by networks 'EVD_DMZ' in the current cluster 2 other interfaces for ovirtmgmt and another VM network on this same host have long functioned perfectly well. When assigning the network to the interface I see the following in messages... Oct 1 20:57:39 lx004 kernel: ADDRCONF(NETDEV_UP): eth1: link is not ready Oct 1 20:57:39 lx004 kernel: 8021q: adding VLAN 0 to HW filter on device eth1 Oct 1 20:57:39 lx004 kernel: device eth1 entered promiscuous mode Oct 1 20:57:40 lx004 kernel: igb: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX Oct 1 20:57:40 lx004 kernel: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Oct 1 20:57:40 lx004 kernel: EVD_DMZ: port 1(eth1) entering forwarding state Looks as it should to me, brctl also shows the bridge is as it should be. # brctl show bridge name bridge id STP enabled interfaces ;vdsmdummy; 8000. no EVD_DMZ 8000.0025901abc49 no eth1 PXE 8000.0007e9a5a197 no eth3 ovirtmgmt 8000.0025901abc48 no eth0 Not able to see anything relevant in vdsm.log vdsClient -s 0 getVdsStats does not list the new network, but instead lists an older deleted one. Has any one encountered an event like this or have any clues on how this might be failing? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Weekly Meeting Minutes -- 2014-10-01
Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-10-01-14.04.html Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-10-01-14.04.txt Log: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-10-01-14.04.log.html If you're on CC- see action items below. = #ovirt: oVirt Weekly Sync = Meeting started by doron at 14:04:43 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-10-01-14.04.log.html . Meeting summary --- * Agenda and roll Call (doron, 14:04:44) * infra update (doron, 14:04:46) * 3.4.z updates (doron, 14:04:47) * 3.5 status (doron, 14:04:49) * conferences and workshops (doron, 14:04:50) * other topics (doron, 14:04:52) * infra update (doron, 14:05:25) * infra update: soon to start creation of all the slaves that will replace the rackspace ones in phx (doron, 14:07:04) * infra update: soon to start creation of the vm and the disk that will hold the repositories (still not in place) to replace or at least leverage linode01 (doron, 14:07:58) * thanks to sbonazzo we have vdsm rpms built entirely on mock, and replaced the old jobs (doron, 14:08:23) * 3.4.z updates (doron, 14:08:44) * 3.4.4 released last week. No additional 3.4.z expected. (doron, 14:09:50) * 3.5 status (doron, 14:13:33) * 3.5.0 status: currently no blockers. RC4 expected tomorrow. (doron, 14:15:23) * 3.5.0 status: If no blockers in RC4 GA should be expected on Monday. (doron, 14:15:46) * ACTION: sbonazzo danken create 3.5.1 branch (doron, 14:21:31) * ACTION: lvernia amureini doron mskrivanek awels fabiand sahina oved__ push all current 3.5.0 bugz to 3.5.1 or later (doron, 14:22:34) * conferences and workshops (doron, 14:23:19) * kudus to ECS in Brisbane for the admin guide! (doron, 14:24:35) * : kvm forum passes: from now on all should be paid for. (doron, 14:25:04) * ovirt workshop (free) registration: https://www.regonline.com/Register/Checkin.aspx?EventID=1625495 (doron, 14:25:54) * following Düsseldorf events bkp will be speaking about oVirt at All Things Open in Raleigh on Oct. 21 and OpenWorldForum in Paris on Oct. 31. (doron, 14:26:46) * alitke will be making an oVirt presentation to the Central PA Open Source event in Pennsylvania on Nov. 1. (doron, 14:27:03) * LISA 14 will be from Nov. 9-14 in Seattle. CentOS is hosting a dojo on Nov. 10, which bkp may attend (doron, 14:27:23) * FOSDEM'15 is Jan 31-Feb 1 bkp applied for a Main Track talk and a stand-alone booth for oVirt. Developer rooms should be announced today, and the deadline for the Main Track talks are today as well. (doron, 14:27:57) * other topics (doron, 14:28:39) * There's a new Administrator's Guide on the site (http://www.ovirt.org/OVirt_Administration_Guide). It is a bootstrapped revision of the RHEV 3.4 Admin Guide, so we need two things: a complete check on converting rhev/rhevm mentions to oVirt (I got most, but not all) and an update as soon as possible to oVirt 3.5. (doron, 14:29:31) * bkp can work on the screenshots for 3.5, but if people can go in and ID/fix the rhev parts and start sending me features new to 3.5, we can start working on it. (doron, 14:29:53) * bkp expected in the Ra'anana office (Oct. 26-30) for a work week of touching base/catching up. (doron, 14:31:01) Meeting ended at 14:32:45 UTC. Action Items * sbonazzo danken create 3.5.1 branch * lvernia amureini doron mskrivanek awels fabiand sahina oved__ push all current 3.5.0 bugz to 3.5.1 or later Action Items, by person --- * doron * lvernia amureini doron mskrivanek awels fabiand sahina oved__ push all current 3.5.0 bugz to 3.5.1 or later * lvernia * lvernia amureini doron mskrivanek awels fabiand sahina oved__ push all current 3.5.0 bugz to 3.5.1 or later * oved__ * lvernia amureini doron mskrivanek awels fabiand sahina oved__ push all current 3.5.0 bugz to 3.5.1 or later * sbonazzo * sbonazzo danken create 3.5.1 branch * **UNASSIGNED** * (none) People Present (lines said) --- * doron (68) * sbonazzo (22) * bkp (18) * evilissimo (14) * sp33t (8) * dcaro (5) * oved__ (4) * sp34t (3) * lvernia (2) * karimb (2) * ovirtbot (2) Generated by `MeetBot`_ 0.1.4 .. _`MeetBot`: http://wiki.debian.org/MeetBot ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [Gluster-users] Raid-5 like gluster method?
use 3.6 disperse feature, but it is beta2 now, you could use it when it is GA On Wed, Sep 24, 2014 at 2:55 PM, Sahina Bose sab...@redhat.com wrote: [+gluster-users] On 09/24/2014 11:59 AM, Demeter Tibor wrote: Hi, Is there any method in glusterfs, like raid-5? I have three node, each node has 5 TB of disk. I would like utilize all of space with redundancy, like raid-5. If it not possible, can I make raid-6 like redundanci within three node? (two brick/node?). Thanks in advance, Tibor ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users ___ Gluster-users mailing list gluster-us...@gluster.org http://supercolony.gluster.org/mailman/listinfo/gluster-users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] glusterfs domains and libgfapi?
Is glusterfs w/ libgfapi working for anyone? Is this still a feature of oVirt? Thanks, Jason ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] LDAP_Quick_Start on CentOS 6.5
Hello, the LDAP_Quick_Start guid from http://www.ovirt.org/LDAP_Quick_Start does not work for me on CentOS 6.5 i get this error at step 3.): - # ldapadd -H ldapi:/// -Y EXTERNAL -f memberof.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry cn={0}module,cn=config ldap_add: Naming violation (64) Step 2) showed some duplicated errors, too: -- [root@ovirt ~]# ldapadd -H ldapi:/// -Y EXTERNAL -f /etc/openldap/schema/cosine.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry cn=cosine,cn=schema,cn=config ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: 0.9.2342.19200300.100.1.2 [root@ovirt ~]# ldapadd -H ldapi:/// -Y EXTERNAL -f /etc/openldap/schema/inetorgperson.ldif SASL/EXTERNAL authentication started SASL username: gidNumber=0+uidNumber=0,cn=peercred,cn=external,cn=auth SASL SSF: 0 adding new entry cn=inetorgperson,cn=schema,cn=config ldap_add: Other (e.g., implementation specific) error (80) additional info: olcAttributeTypes: Duplicate attributeType: 2.16.840.1.113730.3.1.1 Any idea how to fix this? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable)
I had the same challenge and ended up taking the service off my hosted-engine and putting it elsewhere as a workaround. But if I remember right you can still set maintenance mode when the hosted-engine is down, just can't run vm-status? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of ml ml Sent: October-01-14 7:03 AM To: Michael Keller Cc: users@ovirt.org Subject: Re: [ovirt-users] ISO_DOMAIN by NFS behavior (if NFS is unavailable) Hello Michael, this cant be the answer. Maybe NFS is the wrong tool for the wrong purpose in this case then. I am talking about disaster recovery, but you only have soft failures in mind. On Wed, Oct 1, 2014 at 2:40 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, do it before you turn of your engine and leave it detached, because normally it is not needed all the time. Or create a new ISO_DOMAIN storage at a more save place. Regards Michael Am 01.10.2014 um 14:21 schrieb ml ml: Hello Michael, On Wed, Oct 1, 2014 at 1:39 PM, Michael Keller mkel...@psi.de wrote: Hello Mario, you can set the ISO_DOMAIN to maintenance and then detach it from the cluster. All nodes will umount this NFS share when detaching it. You can do your backup etc. unfortunatelly this does not help if my ovirt-engine dies over sudden. If i turn of my ovirt-engine the NFS ISO Domain goes down and i can not set it to maintaince mode anymore. Any other ideas? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] glusterfs domains and libgfapi?
On 10/01/2014 06:23 PM, Jason Brooks wrote: Is glusterfs w/ libgfapi working for anyone? Is this still a feature of oVirt? Thanks, Jason ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users it was disabled due to gaps in libvirt currently fixed. a patch to enable it should be written for folks to test. it should work out of the box for a patched vdsm for gluster storage domains. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Is it possible to add ISCSI over iser?
sorry,I never used hosted-engine. On Wed, Oct 1, 2014 at 3:44 AM, Trey Dockendorf treyd...@gmail.com wrote: I don't. My oVirt engine is bare-metal. - Trey On Tue, Sep 30, 2014 at 7:22 AM, Doron Fediuck dfedi...@redhat.com wrote: - Original Message - From: Trey Dockendorf treyd...@gmail.com To: Arman Khalatyan arm2...@gmail.com Cc: users users@ovirt.org Sent: Tuesday, September 30, 2014 5:24:27 AM Subject: Re: [ovirt-users] Is it possible to add ISCSI over iser? Arman, One of my storage domains is iSCSI using iSER. You need the following in vdsm.conf: [irs] iscsi_default_ifaces = iser,default I believe the proper way to set that so it's preserved during node updates is the following # cat /etc/ovirt-host-deploy.conf.d/40-custom-vdsm-config.conf [environment:enforce] VDSM_CONFIG/irs/iscsi_default_ifaces=str:iser,default The filename I believe can be changed, just requires .conf extension Once VDSM is configured to use iser you can add the domain in the GUI using the IPoIB IP address to initiate iSER. ovirtnode01 # iscsiadm -m session iser: [3] 192.168.211.245:3260,1 iqn.2014-04.DOMAIN.vmstore1:ovirt-data_iscsi - Trey On Wed, Sep 24, 2014 at 6:42 AM, Arman Khalatyan arm2...@gmail.com wrote: Hi, I am trying to attach my new storage domain over iser. My server always gets that request is tcp/ip not rdma. Simple work around is login from hosts over iser. Would be good to add a possibility to select the protocol of iscsi:tcp/iser/srp. Thanks, Arman PS for those who was struggling with same trouble: 1) on hosts: add lines in /etc/rdma/rdma.conf # Load iSER module ISER_LOAD=YES 2) service rdma restart (or modprobe ib_iser 3) iscsiadm -m discovery -t st -p 10.10.10.31 -I iser 4) iscsiadm -m node --login 5) check if disks are there iscsiadm -m session -o show lssci [1228:0:0:0] storage IET Controller 0001 - [1228:0:0:1] diskIET VIRTUAL-DISK 0001 /dev/sde lsblk /dev/sde NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sde8:64 0 36.4T 0 disk ââ100090001 (dm-8) 253:8 0 36.4T 0 mpath ââ18b70b0d--4944--4c73--970d--87a1af353b9f-metadata (dm-9) 253:9 0 512M 0 lvm ââ18b70b0d--4944--4c73--970d--87a1af353b9f-ids (dm-10) 253:10 0 128M 0 lvm ââ18b70b0d--4944--4c73--970d--87a1af353b9f-leases (dm-11) 253:11 0 2G 0 lvm ââ18b70b0d--4944--4c73--970d--87a1af353b9f-outbox (dm-12) 253:12 0 128M 0 lvm ââ18b70b0d--4944--4c73--970d--87a1af353b9f-inbox (dm-13) 253:13 0 128M 0 lvm ââ18b70b0d--4944--4c73--970d--87a1af353b9f-master (dm-14) 253:14 0 1G 0 lvm Thanks for the info, guys. Does any of you use hosted engine with iSER? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [New Documentation] oVirt Administrator's Guide (Please Review!)
I second that opinion. Thanks a million. Sent from my iPad On 01 Oct 2014, at 13:03, Daniel Helgenberger daniel.helgenber...@m-box.de wrote: Hello Brian, great work! Thank you.NowI do not need to refer to RHEV docs any more;) On 01.10.2014 03:01, Brian Proffitt wrote: After several weeks of conversion and updating, I would like to announce the posting of a new page on the oVirt site: the oVirt Administrator's Guide[1]. This guide, adapted to MediaWiki form with the help of Red Hat's Content Services team, should be up to date as of oVirt 3.4. Given the impending release of oVirt 3.5, I invite everyone to take start poking at this documentation once oVirt 3.5 is released and people get familiar with the new release to identify procedures that have changed, and new features that must be added. Please use Bugzilla to assign bugs in this document to me. Up next: an oVirt User's Guide that focuses on the User Portal, followed by a revised Quick Start Guide. Eventually, we hope to have more dedicated resources devoted to oVirt's documentation, and this new set of documents will be a good starting point. [1] http://www.ovirt.org/OVirt_Administration_Guide Peace, Brian -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [Request for Mentors] oVirt Outreach Program for Women
All: Since my Sept. 19 request for mentors for the GNOME OPW project[1], I have had no responses from anyone to lend an effort on mentoring potential applicants. The application process has been opened and I know we have had at least one potential candidate[2] interested, and I would hate to turn people away because we did not have mentor(s) to assist them. The application deadline for OPW is Oct. 22, but because potential applicants are required to get involved with the community before they formally apply, it is very important we have some mentors in place as soon as possible. oVirt has an excellent community in place, and here's another chance to show that off! Peace, Brian [1] http://lists.ovirt.org/pipermail/devel/2014-September/008829.html [2] http://lists.ovirt.org/pipermail/devel/2014-September/008896.html -- Brian Proffitt Community Liaison oVirt Open Source and Standards, Red Hat - http://community.redhat.com Phone: +1 574 383 9BKP IRC: bkp @ OFTC ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] oVirt Newsletter: September 2014 Updates
Events are probably the big news in this month's newsletter, with oVirt community members making presentations and booth appearances in no less than eight shows between now and mid-November. October 16 will see the biggest event on the oVirt community calendar: the 2014 KVM Forum oVirt Workshop in Düsseldorf, Germany (http://www.ovirt.org/KVM_Forum_Workshop_Oct_2014). Register for this free event now and learn more about your favorite virtual data center management platform as well as meet fellow oVirt community members! Other upcoming 2014 events for oVirt include: * LinuxCon EU, Düsseldorf, Germany, Oct. 13-15 (http://events.linuxfoundation.org/events/linuxcon-europe) * CloudOpen Europe, Düsseldorf, Germany, Oct. 13-15 (http://events.linuxfoundation.org/events/cloudopen-europe) * KVM Forum, Düsseldorf, Germany, Oct. 14-16 (http://events.linuxfoundation.org/events/kvm-forum) * All Things Open, Raleigh, North Carolina, Oct. 22-23 (http://allthingsopen.org/) * Open World Forum 2014, Paris, France, Oct. 30-31 (http://www.openworldforum.paris/en/) * Central Pennsylvania Open Source Conference, Lancaster, Pennsylvania (http://www.cposc.org/) * LISA 14, Seattle, Washington, Nov. 9-14 (https://www.usenix.org/conference/lisa14) And, mark your calendars now for FOSDEM'15 in Brussels, Belgium on Jan. 31-Feb. 1, 2015! In the Community oVirt is very happy to announce its participation in the GNOME Foundation's Outreach Program for Women (http://www.ovirt.org/Outreach_Program_for_Women). Learn more today! Our community is always one of our biggest strengths, and we wanted to start celebrating them (http://community.redhat.com/blog/2014/09/ovirt-community-list/). Our new Users and Providers page does just that (http://www.ovirt.org/Users_and_Providers)! This month's case study features Nimbus Concept, a Madrid consultancy that combines oVirt and other open source tools to deliver cloud-based solutions to its customers (http://www.ovirt.org/Nimbus_Concept_Case_Study). oVirt user IT Novum recently had their work highlighted in the German press as they deliver effective solutions using oVirt (http://www.it-director.de/home/a/open-source-fuer-das-rz.html). UDS Enterprise is another downstream product based on the open source oVirt project (https://www.udsenterprise.com/media/filer_public/2c/98/2c980716-2810-42a3-9471-fbe603ff1d82/uds_enterprise_virtual_desktops_on_ovirt.pdf)! oVirt Software Milestones The journey to oVirt 3.5 continued in September, with RC2 released Sept. 12, and RC3 (http://www.ovirt.org/OVirt_3.5_Release_Notes) on Sept. 23. There were also two great test days (http://www.ovirt.org/OVirt_3.5_TestDay), where many bugs were discovered and repaired. If you want to see more of 3.5 before its final release, break out the popcorn and watch our 3.5 video preview series (http://community.redhat.com/blog/2014/09/a-cinematic-peek-at-ovirt-3-5/)! Meanwhile, the 3.4 branch keeps rolling along, with the release of oVirt 3.4.4 on Sept. 24 (http://www.ovirt.org/OVirt_3.4.4_Release_Notes). GoVirt, a.k.a. libgovirt, is a GObject wrapper for the oVirt REST API. libgovirt 0.3.1 was rolled out on Sept. 3 (http://lists.ovirt.org/pipermail/users/2014-September/027142.html)! Deep Dives and Technical Discussions Robb Hamilton and Greg Sheremeta take a video tour at NCDevCon of how Bootstrap was used to created the new PatternFly interface, which will unify different community projects' interfaces, including oVirt 3.5 and above (http://textiles.online.ncsu.edu/online/Play/f962e776fb0b41968c8ff1a715a8ddef1d?catalog=f3393fc7-f068-4b21-84cd-23d1cebcd014). Ravi Nori takes a Deep Dive into the Command Coordinator and Command Executor frameworks in the oVirt back end (http://youtu.be/V-mEttpaGL4). Alon Bar-Lev hosts this Google Hangout to highlight the new Authentication, Authorization and Accounting features in the upcoming oVirt 3.5 (http://youtu.be/aavmOAw7Fa8). Anmol Babu examines Monitoring Gluster Deployment (UI plugin Integrated with Nagios Monitoring) (http://youtu.be/gvLGwFfqKOo). Paul Heinlein ran into obstacles getting oVirt 3.3 VNC console sessions to launch in Mac OS X, so he set to work and now has a description of the problem and a workaround solution posted on GitHub (https://github.com/heinlein/ovirt-console). Interested in Docker? The Gluster community has posted a quick how to containerize oVirt within Docker article (http://blog.gluster.org/2014/07/ovirt-docker/). If you need to migrate VMware machines to KVM, then life is going to be better for you, according to Richard WM Jones (http://rwmj.wordpress.com/2014/08/29/virt-v2v-better-living-through-new-technology/). Here's an additional V2V tutorial for shifting VMware machines to oVirt and RHEV (http://sp4wnr0ot.blogspot.com.br/2014/09/v2v-rhev-from-vmware-55-with.html). What does persistence really mean for oVirt Node? Fabian Deutsch examines the question
Re: [ovirt-users] [ovirt-announce] oVirt Newsletter: September 2014 Updates
Hi Brian I also gave a deep dive on Host Power Management in oVirt http://youtu.be/IuRPGU7nF1E Thanks Eli Mesika - Original Message - From: Brian Proffitt bprof...@redhat.com To: users users@ovirt.org, board bo...@ovirt.org Cc: annou...@ovirt.org Sent: Wednesday, October 1, 2014 10:55:18 PM Subject: [ovirt-announce] oVirt Newsletter: September 2014 Updates Events are probably the big news in this month's newsletter, with oVirt community members making presentations and booth appearances in no less than eight shows between now and mid-November. October 16 will see the biggest event on the oVirt community calendar: the 2014 KVM Forum oVirt Workshop in Düsseldorf, Germany (http://www.ovirt.org/KVM_Forum_Workshop_Oct_2014). Register for this free event now and learn more about your favorite virtual data center management platform as well as meet fellow oVirt community members! Other upcoming 2014 events for oVirt include: * LinuxCon EU, Düsseldorf, Germany, Oct. 13-15 (http://events.linuxfoundation.org/events/linuxcon-europe) * CloudOpen Europe, Düsseldorf, Germany, Oct. 13-15 (http://events.linuxfoundation.org/events/cloudopen-europe) * KVM Forum, Düsseldorf, Germany, Oct. 14-16 (http://events.linuxfoundation.org/events/kvm-forum) * All Things Open, Raleigh, North Carolina, Oct. 22-23 (http://allthingsopen.org/) * Open World Forum 2014, Paris, France, Oct. 30-31 (http://www.openworldforum.paris/en/) * Central Pennsylvania Open Source Conference, Lancaster, Pennsylvania (http://www.cposc.org/) * LISA 14, Seattle, Washington, Nov. 9-14 (https://www.usenix.org/conference/lisa14) And, mark your calendars now for FOSDEM'15 in Brussels, Belgium on Jan. 31-Feb. 1, 2015! In the Community oVirt is very happy to announce its participation in the GNOME Foundation's Outreach Program for Women (http://www.ovirt.org/Outreach_Program_for_Women). Learn more today! Our community is always one of our biggest strengths, and we wanted to start celebrating them (http://community.redhat.com/blog/2014/09/ovirt-community-list/). Our new Users and Providers page does just that (http://www.ovirt.org/Users_and_Providers)! This month's case study features Nimbus Concept, a Madrid consultancy that combines oVirt and other open source tools to deliver cloud-based solutions to its customers (http://www.ovirt.org/Nimbus_Concept_Case_Study). oVirt user IT Novum recently had their work highlighted in the German press as they deliver effective solutions using oVirt (http://www.it-director.de/home/a/open-source-fuer-das-rz.html). UDS Enterprise is another downstream product based on the open source oVirt project (https://www.udsenterprise.com/media/filer_public/2c/98/2c980716-2810-42a3-9471-fbe603ff1d82/uds_enterprise_virtual_desktops_on_ovirt.pdf)! oVirt Software Milestones The journey to oVirt 3.5 continued in September, with RC2 released Sept. 12, and RC3 (http://www.ovirt.org/OVirt_3.5_Release_Notes) on Sept. 23. There were also two great test days (http://www.ovirt.org/OVirt_3.5_TestDay), where many bugs were discovered and repaired. If you want to see more of 3.5 before its final release, break out the popcorn and watch our 3.5 video preview series (http://community.redhat.com/blog/2014/09/a-cinematic-peek-at-ovirt-3-5/)! Meanwhile, the 3.4 branch keeps rolling along, with the release of oVirt 3.4.4 on Sept. 24 (http://www.ovirt.org/OVirt_3.4.4_Release_Notes). GoVirt, a.k.a. libgovirt, is a GObject wrapper for the oVirt REST API. libgovirt 0.3.1 was rolled out on Sept. 3 (http://lists.ovirt.org/pipermail/users/2014-September/027142.html)! Deep Dives and Technical Discussions Robb Hamilton and Greg Sheremeta take a video tour at NCDevCon of how Bootstrap was used to created the new PatternFly interface, which will unify different community projects' interfaces, including oVirt 3.5 and above (http://textiles.online.ncsu.edu/online/Play/f962e776fb0b41968c8ff1a715a8ddef1d?catalog=f3393fc7-f068-4b21-84cd-23d1cebcd014). Ravi Nori takes a Deep Dive into the Command Coordinator and Command Executor frameworks in the oVirt back end (http://youtu.be/V-mEttpaGL4). Alon Bar-Lev hosts this Google Hangout to highlight the new Authentication, Authorization and Accounting features in the upcoming oVirt 3.5 (http://youtu.be/aavmOAw7Fa8). Anmol Babu examines Monitoring Gluster Deployment (UI plugin Integrated with Nagios Monitoring) (http://youtu.be/gvLGwFfqKOo). Paul Heinlein ran into obstacles getting oVirt 3.3 VNC console sessions to launch in Mac OS X, so he set to work and now has a description of the problem and a workaround solution posted on GitHub (https://github.com/heinlein/ovirt-console). Interested in Docker? The Gluster community has posted a quick how to containerize oVirt within Docker article (http://blog.gluster.org/2014/07/ovirt-docker/). If you need to migrate VMware machines to KVM, then life is
Re: [ovirt-users] LDAP_Quick_Start on CentOS 6.5
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi. which ovirt-engine version? kind regards Sven -BEGIN PGP SIGNATURE- Version: GnuPG v2 iQGcBAEBAgAGBQJULGoNAAoJEAq0kGAWDrqlT/sL/jHWfMbu7/PjtyeetklTmaWy QMAEHHLuK+I4ktvObITAs33Jm20aAqubuYAET+Xj/GFL7ORZQxZlHVdK+aNmhfSB 1QPAuyq7VhXSCO3UqWHE452p8BDSBhoKc1CqV9ElFr3lKUC/lMcngE9qAcq8E5jn LPnq9g41upzcjGSdAOkDLuwO5v4s7w1b24rPxr289T7xSL12BfKJCa+0A6JoXY8F vLzWybiMYnWlLjxw2gQHdLLQB6Un9B5G6Ym4jvqwCr1MjvxXn1HkE+uE3fwPlQrA Zua/FfZOYyiWh1mhfkWbHd13pfBGdnF7ovMICT0NpzTDCUkORFhJy4I3nO//gKzr k57JjC6d/p7iRMJIeHDA9KmO7f8sPfwJKW9KusuhQbt2euPLvguAhatoW5WerJPv fEjZJb3f0UZ6J+C8dLQkuLY5DmGD4YHLuZqHcRgg+JeObWOizbWey9oq9Aq9ARS+ iujaabsJE5/emw8SwSgp/Xa7m93stL2RTqCqaLpfTg== =xKN3 -END PGP SIGNATURE- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
On Tue, Sep 30, 2014 at 08:42:34PM -0400, Nir Soffer wrote: - Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Tuesday, September 30, 2014 5:46:15 PM Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go Il 29/09/2014 08:34, Sandro Bonazzola ha scritto: Hi, We were supposed to start composing oVirt 3.5.0 GA today 2014-09-29 but we still have 3 blockers. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC3 tag. - Please provide ETA for new blockers for rescheduling an RC4 and a GA release. The bug tracker [1] shows 3 blockers: Bug IDWhiteboard Status Summary 1147085 storage POSTMemory volumes not deleted when removing a vm with snapshots 1146073 sla POSTFailing to Attach a Storage Domain without Disk Profiles to a Data Center 3.5 1127460 storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage Today we have: Bug ID Whiteboard Status Summary 1127460 storage POSTVM abnormal stop after LV refreshing when using thin provisioning on block storage Basically this is an issue with systemd, not with ovirt. However we have a workaround that we can consume in the short term. Patch for RHEL7: http://gerrit.ovirt.org/33492 We believe that we can get the real fix for the underlying component for Fedora quickly. If not, we have a patch ready for enabling the workaround on Fedora. Patch for Fedora: http://http://gerrit.ovirt.org/33555 1147971 storage NEW Snapshot locked after successful live storage migration This is an ifra issue, handled by Ravi. ETA? Dan? We still have nasty selinux-related issues on el7, such as 1142454 sanlock not allowed to send SIGTERM or SIGKILL signals and surprizes with el6.6 beta 1148467 Fail to start VM: libvirtError: Child quit during startup handshake: Input/output error 1148432 vdsm fails to start if there is a virbr0 that's attached to an interface but I've tagged vdsm v4.16.6 for rc4. Sandro could you take a snapshot based on it? (We still have an issue building 3.5's vdsm on Fedora for ARM) ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go
Il 02/10/2014 00:53, Dan Kenigsberg ha scritto: On Tue, Sep 30, 2014 at 08:42:34PM -0400, Nir Soffer wrote: - Original Message - From: Sandro Bonazzola sbona...@redhat.com To: Users@ovirt.org, de...@ovirt.org Sent: Tuesday, September 30, 2014 5:46:15 PM Subject: Re: [ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.0 status - Go / No Go Il 29/09/2014 08:34, Sandro Bonazzola ha scritto: Hi, We were supposed to start composing oVirt 3.5.0 GA today 2014-09-29 but we still have 3 blockers. Maintainers: - Please be sure that 3.5 snapshot satisfy release criteria[9] - Please be sure that no pending patches are going to block the release - If any patch must block the GA release please raise the issue as soon as possible. - If any packages need a rebase please raise the issue as soon as possible. - Be aware that packages that doesn't need a rebase must be re-built with final release versioning from the RC3 tag. - Please provide ETA for new blockers for rescheduling an RC4 and a GA release. The bug tracker [1] shows 3 blockers: Bug ID Whiteboard Status Summary 1147085storage POSTMemory volumes not deleted when removing a vm with snapshots 1146073sla POSTFailing to Attach a Storage Domain without Disk Profiles to a Data Center 3.5 1127460storage NEW VM abnormal stop after LV refreshing when using thin provisioning on block storage Today we have: Bug ID Whiteboard Status Summary 1127460 storage POSTVM abnormal stop after LV refreshing when using thin provisioning on block storage Basically this is an issue with systemd, not with ovirt. However we have a workaround that we can consume in the short term. Patch for RHEL7: http://gerrit.ovirt.org/33492 We believe that we can get the real fix for the underlying component for Fedora quickly. If not, we have a patch ready for enabling the workaround on Fedora. Patch for Fedora: http://http://gerrit.ovirt.org/33555 1147971 storage NEW Snapshot locked after successful live storage migration This is an ifra issue, handled by Ravi. ETA? Dan? We still have nasty selinux-related issues on el7, such as 1142454 sanlock not allowed to send SIGTERM or SIGKILL signals and surprizes with el6.6 beta 1148467 Fail to start VM: libvirtError: Child quit during startup handshake: Input/output error 1148432 vdsm fails to start if there is a virbr0 that's attached to an interface but I've tagged vdsm v4.16.6 for rc4. Sandro could you take a snapshot based on it? (We still have an issue building 3.5's vdsm on Fedora for ARM) Ok, I'll take it, thanks -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users