Re: [ovirt-users] Optaplanner Problem
Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like...@cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users@ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ubuntu/Debian support?
- Original Message - From: Itamar Heim ih...@redhat.com To: users@ovirt.org Sent: Monday, November 17, 2014 9:41:32 AM Subject: [ovirt-users] Ubuntu/Debian support? So, a quick non-scientific poll... Motivation: It has been suggested that adding ubuntu or debian distro support could broaden the reach of the oVirt community. To date, there has been some work towards this goal, but it is not coming to a conclusion. Questions that comes to mind: 1) Is this still an issue? Define issue. iow, define what our goal is. If it's make it possible to easily run ovirt on debian, that's one thing, perhaps easily achieved by your points 4-5 below. If it's have ovirt packaged inside the Debian archive that's a considerably different issue. I think we should aim for the latter, the former is a start. 2) Can we afford to dilute the focus we have as it is hard enough to stabilize the currently supported distro's? is it worth the potential impact? imho yes. I agree with the other replies already posted. 3) Would it have maintainers catering to it so it won't be left behind / delay development? For Debian, generally speaking, it's up to us to support. AFAIK almost all Debian developers are volunteers, and do whatever they find interesting or need for their own use. So we should either try to contact existing such developers dealing with virtualisation-related packages there and see how interested they are in ovirt, or try to do this on our own. To get things into the archive you do not necessarily need to be a developer yourself, they have a system of mentors etc. for that. For Ubuntu, if Canonical is interested, they are of course more than welcome to help! This will obviously help also Debian, although AFAIK not necessarily every package that is accepted to the Ubuntu archive is automatically or easily accepted to Debian's. 4) Why bother with host support, ovirt-node can be used? As long as we see value in developing and supporting hosts based on el/fedora, this value also exists for Debian-based hosts. If we decide one day to support only ovirt-node, it's not as important what distro it's based on. 5) Why bother with engine support, a virtual appliance or a docker image could be used? Because many users will find it a higher barrier to implement, for various reasons. 6) if we do it, should we focus on Ubuntu or Debian distro first? IMO Debian, I agree with other replies already posted. 7) if we do it, should we focus on host or engine first? Not sure I can see a strong preference for one of them. I'd like to add my own question, since none of the replies so far replied to it: 8. Do we have here existing users that are interested in this? If it worked equally well, would you (re?)install on Debian? Because if the answer is 'No', we might be discussing this on the wrong list, and better approach Debian lists/forums/etc. -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ubuntu/Debian support?
On 11/18/2014 03:54 AM, Yedidyah Bar David wrote: Define issue. iow, define what our goal is. If it's make it possible to easily run ovirt on debian, that's one thing, perhaps easily achieved by your points 4-5 below. If it's have ovirt packaged inside the Debian archive that's a considerably different issue. I think we should aim for the latter, the former is a start. I'm fine with for not inside - that's the current status for fedora and we are not there yet even for centos. 8. Do we have here existing users that are interested in this? If it worked equally well, would you (re?)install on Debian? Because if the answer is 'No', we might be discussing this on the wrong list, and better approach Debian lists/forums/etc. that's one of the reasons i qualified this as a quick non-scientific poll... ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ubuntu/Debian support?
- Original Message - From: Itamar Heim ih...@redhat.com To: Yedidyah Bar David d...@redhat.com Cc: users@ovirt.org Sent: Tuesday, November 18, 2014 10:58:08 AM Subject: Re: [ovirt-users] Ubuntu/Debian support? On 11/18/2014 03:54 AM, Yedidyah Bar David wrote: Define issue. iow, define what our goal is. If it's make it possible to easily run ovirt on debian, that's one thing, perhaps easily achieved by your points 4-5 below. If it's have ovirt packaged inside the Debian archive that's a considerably different issue. I think we should aim for the latter, the former is a start. I'm fine with for not inside - that's the current status for fedora and we are not there yet even for centos. IIRC 3.1 was (is?) in the archive. The fact that recent versions aren't, is a different issue. oVirt is at least currently developing quite fast, and the release processes of distributions mean that users that use only stuff from the official archive will get older versions, which I think for oVirt wasn't very acceptable until recently, perhaps still is - I do not think anyone (here or elsewhere) would like to support 3.1, as recent versions are so much better. Even if we do not aim for inclusion in the official archive any time soon, we can still try to make our packages as nice as possible for that - including e.g. carefully checking the Debian policy documents and adhering to them, try to consult experienced Debian packagers for whatever pitfalls we should try to avoid, etc. All of this is not as important if you merely want to make using ovirt on Debian possible or easy. 8. Do we have here existing users that are interested in this? If it worked equally well, would you (re?)install on Debian? Because if the answer is 'No', we might be discussing this on the wrong list, and better approach Debian lists/forums/etc. that's one of the reasons i qualified this as a quick non-scientific poll... Not sure this question makes it any more scientific :-) -- Didi ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Optaplanner Problem
Hi, Please check the browser's debug console for error messages. Then check the firewall and jboss configuration on the Optimizer server. The JBoss log on the optimizer machine will tell you whether it does some computations (you will see score lines). Then try manually connecting (telnet) to optimizer:8080 from your machine (the same where the webadmin is running). We need more data to be able to give you more specific instructions. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - What is your web browser? In my case , if i use the Chrome then the status would be Waiting for data... forever, but when i use Firefox then everything is ok. by the way, please make sure that you optimizer can be connected from ovirt-engine firstly. e.g. if you use jboss, you need to run the following command: ./standalone.sh -b 0.0.0.0 if you have no -b option in your command line, then only localhost can access the optimizer. like...@cs2c.com.cn From: s k Date: 2014-11-18 16:34 To: Doron Fediuck CC: users@ovirt.org Subject: Re: [ovirt-users] Optaplanner Problem Network access is working both sides and i don't see any errors in the logs. You can see a screenshot of the tab in the below link: http://picpaste.com/Optimizer_1-9UdHfclq.png Date: Mon, 17 Nov 2014 11:14:16 -0500 From: dfedi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org; msi...@redhat.com Subject: Re: [ovirt-users] Optaplanner Problem - Original Message - From: s k sokratis1...@outlook.com To: users@ovirt.org Sent: Monday, November 17, 2014 1:52:42 PM Subject: [ovirt-users] Optaplanner Problem Hello, I upgraded oVirt to version 3.5.0 today and I also installed Optaplanner in a separate VM. While the installation was successful the Optimizer tab in oVirt Engine doesn't report the correct information. Although there are VMs that are shutdown and the hosts are not balanced in terms of memory usage the Optimized tab reports the following: SOLUTION STATUS Status: Waiting for data... Solution is being refreshed every 30 seconds. Freeze solution VMS THAT SHOULD BE STARTED No VM starts are requested at this moment. MIGRATION / START STEPS No migrations are needed at this moment. The state is stable. TARGET STATE host vm memory [all in GB] used available No information is displayed in TARGET STATE. Hi, it seems that the optimizer is not getting information from the engine DB, or the UI plugin cannot connect the Optimizer. Do you see any meaningful information in the UI? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
On 18-11-2014 10:25, Juan Pablo Lorier wrote: Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, The way I split this is using a split-dns solutions, either with bind or hosts files. This way engine sees the mgmt address and the gluster servers see their storage address. Regards, Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Non-Operational state because management interfaces down
htmlbodyHi, yes that's exactly what I tried to describe. Thanks Ekin. There is no switch between 2 hosts/nodes (for ovirtmgmt network). It's similar to situation when I tried just one host/node and put the ovirtmgmt network to not connected network interface (will connect it once we buy second host). Cheers, Luf Ekin Meroğlu píše v Út 18. 11. 2014 v 00:00 +0200: Hi Lior, If I'm not mistaken, on Luf's topology, there is no switch on the management bond (bond0) - just a cross or regular eth cable connecting physical interfaces on both nodes. So when one node is powered down, there is no link detected on the other node. Regards, On Mon, Nov 17, 2014 at 12:02 PM, Lior Vernia lver...@redhat.com wrote: Hi Luf, Apologies, I probably don't understand the details of your L2 toplogy; how come when you turn off one host it affects the link state of of the other one's interfaces?... Yours, Lior. On 14/11/14 11:43, Finstrle, Ludek wrote: Hi, I have 2-node ovirt cluster. Both machines has 4 interfaces. 2 interfaces in bond1 for data 2 interfaces in bond0 for management (short connected directly between servers) switch0 -\ /-\ /- switch0 node1 node2 switch1 -/ \-/ \- switch1 I setup everything as I want/expect but I hit one problem and I don't know how to fix it. The problem is when I switch off one of the machines for maintenance (node01.ovirt in this case). I get in ovirt engine this message: Host node02.ovirt moved to Non-Operational state because interfaces which are down are needed by required networks in the current cluster: 'bond0 (ovirtmgmt)'. Do you have any idea how to avoid it? I can't change physical architecture as I don't have 10Gb switch. BTW it's the same as if I want to start with only 1 node and separated data and mgmt networks: switch - host --(not connected iface for mgmt as I don't need it) Thanks, Luf NOTICE: This email and any attachments may contain confidential and proprietary information of NetSuite Inc. and is for the sole use of the intended recipient for the stated purpose. Any improper use or distribution is prohibited. If you are not the intended recipient, please notify the sender; do not review, copy or distribute; and promptly delete or destroy all transmitted information. Please note that all communications and information transmitted through this email system may be monitored and retained by NetSuite or its agents and that all incoming email is automatically scanned by a third party spam and filtering service which may result in deletion of a legitimate e-mail before it is read by the intended recipient. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Ekin Meroğlu Red Hat Certified Datacenter Specialist linuxera Özgür Yazılım Çözüm ve Hizmetleri T +90 (850) 22 LINUX GSM +90 (532) 137 77 04 NOTICE: This email and any attachments may contain confidential and proprietary information of NetSuite Inc. and is for the sole use of the intended recipient for the stated purpose. Any improper use or distribution is prohibited. If you are not the intended recipient, please notify the sender; do not review, copy or distribute; and promptly delete or destroy all transmitted information. Please note that all communications and information transmitted through this email system may be monitored by NetSuite or its agents and that all incoming email is automatically scanned by a third party spam and filtering service /body/html ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
htmlbodyDemeter Tibor píše v Po 17. 11. 2014 v 14:10 +0100: Hello, Thank you for the detailed reply. Yes, the vms are used an independent network/network interfaces for access the internet. So, in this case I could separate the high glusterfs traffic from ovirt management traffic when I disable vm network on ovirtmgmt interface. I will try-out this night this feature. Hi, you can try it only if you don't have hosted engine ;) Cheers, Luf Thanks a lot, Tibor - Eredeti üzenet - Hi Tibor, On 13/11/14 13:41, Demeter Tibor wrote: Hi, I have a 3 node gluster based cluster. There are 3x3 Nic with bonding. Sometimes the management is very slow because high gluster traffic. Is it possible to separate ovirtmgmt network from glusterfs traffic? I have only one interface (ovirtmgmt) for all of services (migration, etc). I just wondering I will make three VLANs for these services and use the QoS function. But how can specify glusterfs for use an other vlan for gluster traffic an a other one for management? This generally sounds like a good plan, but note that QoS on the host-level will only become available in oVirt 3.6 (it might become available soon on master, if you're feeling lucky...). VM-level QoS (available since 3.3) won't help you with administrative traffic (i.e. traffic that isn't going into / coming out of the VMs themselves). Also, I have more questions about this: - If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm afraid the nodes will lost the connection with each other nodes. If the switch allows this VLAN to reach all hosts, there shouldn't be a problem; since oVirt 3.4 the VLAN tagging should propagate to all active hosts. However, see my comment below concerning VM network. - Is it possible on a live system? What will happen with the mounted glustefs based datastores? I'm not knowledgeable about gluster specifics, but let's see if I can help. What's the current situation with the gluster network, is it already VLAN-tagged? If it is and you're not moving it to another interface on the hosts, I *think* things should be fine. - What does vm network mean on ovirtmgmt interface? Can I use this for seperate network traffic? This means that a bridge is created for this network on hosts. If VMs don't use this network (i.e. virtual interfaces are assigned profiles of ovirtmgmt), you can make it non-VM (with no VLAN tagging) and have it assigned to the same host interface as VLAN-tagged networks (I would say this is less risky than VLAN-tagging ovirtmgmt). My plan is - vlan.101 ovirtmgmt - vlan 102 glusterfs - vlan 103 migration - vlan 104 display What is the recommended procedure of this? Thanks in advance, Regards, Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users NOTICE: This email and any attachments may contain confidential and proprietary information of NetSuite Inc. and is for the sole use of the intended recipient for the stated purpose. Any improper use or distribution is prohibited. If you are not the intended recipient, please notify the sender; do not review, copy or distribute; and promptly delete or destroy all transmitted information. Please note that all communications and information transmitted through this email system may be monitored by NetSuite or its agents and that all incoming email is automatically scanned by a third party spam and filtering service /body/html ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Ubuntu/Debian support?
- Original Message - From: Itamar Heim ih...@redhat.com To: users@ovirt.org Sent: Monday, November 17, 2014 8:41:32 AM Subject: [ovirt-users] Ubuntu/Debian support? So, a quick non-scientific poll... Motivation: It has been suggested that adding ubuntu or debian distro support could broaden the reach of the oVirt community. To date, there has been some work towards this goal, but it is not coming to a conclusion. Questions that comes to mind: 1) Is this still an issue? On my opinion yes. 2) Can we afford to dilute the focus we have as it is hard enough to stabilize the currently supported distro's? is it worth the potential impact? Probably yes, it can help attracting new users. 3) Would it have maintainers catering to it so it won't be left behind / delay development? Yes, on a lower priority. 4) Why bother with host support, ovirt-node can be used? Yes, but for a new potential user it's probably easier, or at least more familiar, to take a look at the project running it on a distro he well know. 5) Why bother with engine support, a virtual appliance or a docker image could be used? As 4. 6) if we do it, should we focus on Ubuntu or Debian distro first? From Linux counter data ( http://linuxcounter.net/distributions.html ), Ubuntu seams to be today most popular distribution. I'm not really sure about the statistics value of that data cause the statistics base is really low and it doesn't distinct desktop usage from server one, but probably if the aim is to broader the user base it would be more interesting to start from Ubuntu. Maybe it would be also easier to involve somebody from Canonical. 7) if we do it, should we focus on host or engine first? Both, maybe focusing also on all-in-one setup which, of course is not the most enterprise grade setup, but it could be more interesting for Ubuntu target users. Thoughts? Thanks, Itamar ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Optaplanner Problem
Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4 trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6 createEventHandler/eventHandler/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2780:6 forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:330:10 createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4 } angular.js:9778 Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9 result.html:384 Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515 result.html:384 Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2 result.html:384 Updating host 18152471-55d8-4cc0-8846-2071f29290df result.html:384 Error: $scope.result.hosts is undefined $scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:354:13 $scope.refreshHostInfo/@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:387:17 $http/promise.success/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7946:11 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:26 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13 done@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8204:34 completeRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8412:7 createHttpBackend//xhr.onreadystatechange@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8351:1 angular.js:9778 Updating vm 315f674b-24da-42d7-9580-aeed5703c20c result.html:399 Updating vm e5074245-e3cc-4423-bc08-ddaa32f876d4 result.html:399 Updating vm f2c61fb9-ffd6-4b96-b7bc-645a328371b3 result.html:399 Updating vm 0c114b32-1d9f-43a1-bf75-723a4a3a4735 result.html:399 Updating vm b62219e2-59bd-4ee8-8ec9-fd3031403aa9 result.html:399 Updating vm dfabf11c-6ddf-4d36-a8b4-64dd8d7eb986 result.html:399 Updating vm 69536040-09be-40df-8a46-51a737edadb6 result.html:399 Updating vm 9b00724b-0719-4b3b-b5c1-e304e3d14428 result.html:399 Updating vm e980d298-6dfd-4daf-adfe-32ada4375815 result.html:399 Updating vm 0aa48214-3377-41eb-9f29-2e0d926ab929 result.html:399 Updating
Re: [ovirt-users] Optaplanner Problem
Hi, we do not support the newest versions of Firefox and other browsers yet. This is a known issue: http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined that can be solved by disabling one of the browser security checks before we implement the SSL version of the optimizer service. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4 trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6 createEventHandler/eventHandler/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2780:6 forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:330:10 createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4 } angular.js:9778 Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9 result.html:384 Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515 result.html:384 Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2 result.html:384 Updating host 18152471-55d8-4cc0-8846-2071f29290df result.html:384 Error: $scope.result.hosts is undefined $scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:354:13 $scope.refreshHostInfo/@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:387:17 $http/promise.success/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7946:11 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:26 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13 done@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8204:34 completeRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8412:7 createHttpBackend//xhr.onreadystatechange@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8351:1 angular.js:9778 Updating vm 315f674b-24da-42d7-9580-aeed5703c20c result.html:399 Updating vm e5074245-e3cc-4423-bc08-ddaa32f876d4 result.html:399 Updating vm f2c61fb9-ffd6-4b96-b7bc-645a328371b3
Re: [ovirt-users] Optaplanner Problem
Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? What about the server.log file? Why does it throw this error? How can I change the logging level? Thanks, Sokratis Date: Tue, 18 Nov 2014 07:32:47 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, we do not support the newest versions of Firefox and other browsers yet. This is a known issue: http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined that can be solved by disabling one of the browser security checks before we implement the SSL version of the optimizer service. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4 trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6 createEventHandler/eventHandler/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2780:6 forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:330:10 createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4 } angular.js:9778 Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9 result.html:384 Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515 result.html:384 Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2 result.html:384 Updating host 18152471-55d8-4cc0-8846-2071f29290df result.html:384 Error: $scope.result.hosts is undefined $scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:354:13 $scope.refreshHostInfo/@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:387:17 $http/promise.success/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7946:11 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:31 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:26 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:16 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:15 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:13
Re: [ovirt-users] Optaplanner Problem
Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? I have no idea about Chrome, but IE used to be OK. Is the issue there as well (meaning they finally included the security check)? What about the server.log file? Why does it throw this error? How can I change the logging level? Error? Do you mean the DEBUG message? You can configure JBoss logging in the standalone.xml file (if you use standalone). But I am not a JBoss expert. https://docs.jboss.org/author/display/AS71/Logging+Configuration It should be in /usr/share/ovirt-engine-jboss-as/ somewhere if you are using Cent OS 6. The location is different if you use Fedora or RHEL. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? What about the server.log file? Why does it throw this error? How can I change the logging level? Thanks, Sokratis Date: Tue, 18 Nov 2014 07:32:47 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, we do not support the newest versions of Firefox and other browsers yet. This is a known issue: http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined that can be solved by disabling one of the browser security checks before we implement the SSL version of the optimizer service. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4 trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6 createEventHandler/eventHandler/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2780:6 forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:330:10 createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4 } angular.js:9778 Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9 result.html:384 Updating host fd0ea29e-2022-4a0f-8a5a-30c9b4497515 result.html:384 Updating host 7c44018d-4517-4cda-8b21-cda31fc534d2 result.html:384 Updating host 18152471-55d8-4cc0-8846-2071f29290df result.html:384 Error: $scope.result.hosts is undefined $scope.recomputeResources@https://ovm/ovirt-engine/webadmin/plugin/oVirtOptimizer/result.html#0001-0001-0001-0001-00a1:354:13
Re: [ovirt-users] Optaplanner Problem
Hi, No it doesn't work on IE11. You can see a screenshot here: http://picpaste.com/Optimizer_IE11-JFreSHvp.png I managed to change the logging level to INFO (by modifying standalone.xml). Thanks a lot! Sokratis Date: Tue, 18 Nov 2014 08:29:31 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? I have no idea about Chrome, but IE used to be OK. Is the issue there as well (meaning they finally included the security check)? What about the server.log file? Why does it throw this error? How can I change the logging level? Error? Do you mean the DEBUG message? You can configure JBoss logging in the standalone.xml file (if you use standalone). But I am not a JBoss expert. https://docs.jboss.org/author/display/AS71/Logging+Configuration It should be in /usr/share/ovirt-engine-jboss-as/ somewhere if you are using Cent OS 6. The location is different if you use Fedora or RHEL. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? What about the server.log file? Why does it throw this error? How can I change the logging level? Thanks, Sokratis Date: Tue, 18 Nov 2014 07:32:47 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, we do not support the newest versions of Firefox and other browsers yet. This is a known issue: http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined that can be solved by disabling one of the browser security checks before we implement the SSL version of the optimizer service. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4 trigger@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2509:6 createEventHandler/eventHandler/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2780:6 forEach@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:330:10 createEventHandler/eventHandler@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:2779:4 } angular.js:9778 Updating host 1c3b7899-bd75-4e26-aaf6-983b54c54be9 result.html:384 Updating host
Re: [ovirt-users] Optaplanner Problem
Ah, the IE 11 issue seems to be something else. We use Angular JS for the page and the screenshot shows that the template fields weren't replaced by content. I found couple of references to issues with Angular and IE 11. Are you able to check if IE 10 is ok so we can isolate the issue? -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, No it doesn't work on IE11. You can see a screenshot here: http://picpaste.com/Optimizer_IE11-JFreSHvp.png I managed to change the logging level to INFO (by modifying standalone.xml). Thanks a lot! Sokratis Date: Tue, 18 Nov 2014 08:29:31 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? I have no idea about Chrome, but IE used to be OK. Is the issue there as well (meaning they finally included the security check)? What about the server.log file? Why does it throw this error? How can I change the logging level? Error? Do you mean the DEBUG message? You can configure JBoss logging in the standalone.xml file (if you use standalone). But I am not a JBoss expert. https://docs.jboss.org/author/display/AS71/Logging+Configuration It should be in /usr/share/ovirt-engine-jboss-as/ somewhere if you are using Cent OS 6. The location is different if you use Fedora or RHEL. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I disabled the security check in Firefox and it works now. Is there a similar workaround for Chrome and IE? What about the server.log file? Why does it throw this error? How can I change the logging level? Thanks, Sokratis Date: Tue, 18 Nov 2014 07:32:47 -0500 From: msi...@redhat.com To: sokratis1...@outlook.com CC: users@ovirt.org Subject: Re: Optaplanner Problem Hi, we do not support the newest versions of Firefox and other browsers yet. This is a known issue: http://www.ovirt.org/Features/Optaplanner#Data_refresh_failed:_undefined that can be solved by disabling one of the browser security checks before we implement the SSL version of the optimizer service. -- Martin Sivák msi...@redhat.com Red Hat Czech RHEV-M SLA / Brno, CZ - Original Message - Hi, I have modified standalone.xml and replaced 127.0.0.1 with the IP address of the server and the connection to optimizer:8080 works correctly. Using Chrome I get Waiting for data... Using Firefox I get Status: Data refresh failed: undefined I inspected the page and when I click on the tab I get the following errors: Blocked loading mixed active content http://optimizer:8080/ovirt-optimizer/result/0001-0001-0001-0001-00a1[Learn More] angular.js:8321 /ovirt-engine/api/hosts result.html:419 Exception { message: , result: 2153644038, name: , filename: https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js;, lineNumber: 8321, columnNumber: 0, inner: null, data: null, stack: createHttpBackend/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8321:6 sendReq@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:8180:0 $http/serverRequest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:7921:15 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/defer/deferred.promise.then/wrappedCallback@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11319:30 qFactory/ref/.then/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:11405:25 $RootScopeProvider/this.$get/Scope.prototype.$eval@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12412:15 $RootScopeProvider/this.$get/Scope.prototype.$digest@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12224:14 $RootScopeProvider/this.$get/Scope.prototype.$apply@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:12516:12 bootstrap/doBootstrap/@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1382:8 invoke@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:3869:13 bootstrap/doBootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1380:0 bootstrap@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1394:0 angularInit@https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:1307:4 @https://ajax.googleapis.com/ajax/libs/angularjs/1.2.16/angular.js:21459:4
[ovirt-users] Power Management - but no LO?
Hello, I am toying an idea involving using oVirt's PM capabilities (esp. the cluster power_saving policy) in conjuration with some consumer grate hosts for raw compute applications. Now, these hosts do not have any lights out or BMC capabilities. However, they could be started with WOL packets. Is there a way how this can be done in oVirt? Shutting down hosts with ssh and starting them with WOL? Thanks! -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to IPA
On Mon, 2014-11-17 at 16:48 -0500, Alon Bar-Lev wrote: - Original Message - From: Cameron Christensen cameron.christen...@uk2group.com To: Alon Bar-Lev alo...@redhat.com Cc: users@ovirt.org Sent: Monday, November 17, 2014 11:43:34 PM Subject: Re: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to IPA On Mon, 2014-11-17 at 14:39 -0500, Alon Bar-Lev wrote: - Original Message - From: Cameron Christensen cameron.christen...@uk2group.com To: users@ovirt.org Sent: Friday, November 14, 2014 5:39:54 PM Subject: [ovirt-users] Upgrade to Ovirt 3.5.0 Authentication Fails to IPA Hello, I upgraded to ovirt 3.5.0 and can no longer authenticate to IPA. Starting up ovrit-engine the extension manager fails to properly load the service that handles Kerberos/LDAP. This is probably a bug, can you please execute the following and paste result: # PGPASSWORD=@PASSWORD@ psql -U engine -d engine -c select * from vdc_options where option_name='LDAPSecurityAuthentication' option_id |option_name | option_value| version ---++---+- 165 | LDAPSecurityAuthentication | example.org:GSSAPI | general I replaced my domain name with 'example.org' I thought it will be empty... and it contains valid value. Yair? Looking through the vdc_options table I noticed that many of the LDAP* and Ad* settings use two different spellings for the Kerberos/LDAP domain. One in all upper case letters, EXAMPLE.ORG and one in all lower case, example.org. (I'm guessing this is to handle either spelling of the domain?) I updated LDAPSecurityAuthentication and set the option_value to use both the upper case and lower case domain name, 'EXAMPLE.ORG:GSSAPI,example.org:GSSAPI'. select * from vdc_options where option_name = 'LDAPSecurityAuthentication'; option_id |option_name |option_value | version ---++-+- 165 | LDAPSecurityAuthentication | EXAMPLE.ORG:GSSAPI,example.org:GSSAPI | general Using both domain names I am able to authenticate, authorize and pull account information from the IPA server once again. Thanks for pointing me at the right location. Cameron signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
On 18/11/14 06:25, Juan Pablo Lorier wrote: Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I think that the possibility to add a separate storage network is a must. It doesn't make sense Gluster support if you can't separate management network traffic of storage network traffic. In 3.5 you can define management/vm/display/migration interfaces but not storage interfaces. Why? I don't know. But I think that Gluster support is incomplete without exclusive storage networking. Regards Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Engine is still unreachable
Hi!, I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says: (1, 2, 3)[1]: 1 [ ERROR ] Engine is still unreachable Engine health status page is not yet reachable. To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup what should I do? how to fix this? Thanks in advance, sandvik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Status libgfapi support in oVirt
I'm replying to 'up' this as well as I'm most interested in this. I actually thought this was implemented and working too. On Mon, Nov 17, 2014 at 10:01 AM, Daniel Helgenberger daniel.helgenber...@m-box.de wrote: Hello Joop, thanks for raising the issue as it is one of the things I assumed are already implemented and working. Sadly I cannot provide any answer ... On 17.11.2014 09:39, Joop wrote: I have been trying to use libgfapi glusterfs support in oVirt but can't get it to work. After talks on IRC it seems I should apply a patch (http://gerrit.ovirt.org/33768) to enable libgf BUT I can't get it to work. Systems used: - hosts Centos7 or Fedora20 (so upto date qemu/libvirt/oVirt(3.5)) - glusterfs-3.6.1 - vdsm-4.16.0-524.gitbc618a4.el7.x86_64 (snapshot master 14-nov) - vdsm-4.16.7-1.gitdb83943.el7.x86_64 (official ovirt-3.5 vdsm, seems newer than master snapshot?? ) Just adding the patch to vdsm-4.16.7-1.gitdb83943.el7.x86_64 doesn't work, vdsm doesn't start anymore due to an error in virt/vm.py. Q1: what is de exact status of libgf and oVirt. Q2: how do I test that patch? Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Daniel Helgenberger m box bewegtbild GmbH P: +49/30/2408781-22 F: +49/30/2408781-10 ACKERSTR. 19 D-10115 BERLIN www.m-box.de www.monkeymen.tv Geschäftsführer: Martin Retschitzegger / Michaela Göllner Handeslregister: Amtsgericht Charlottenburg / HRB 112767 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] separate ovirtmgmt from glusterfs traffic
Hi, I think is a really good question, why does not possible sepereate storage network traffic like display, etc? This is not an easy task to set up, and it's more difficult on a live system. Tibor - Eredeti üzenet - On 18/11/14 06:25, Juan Pablo Lorier wrote: Hi, In my experience, having ovirt traffic on the same nic that gluster can make your platafrom unstable. I was using it for large file storage and gluster has so big traffic that ovirt got confused and started marking hosts as unavailable because of hi latency. I've opened an RFE over a year ago, but had no luck with the team to get it done. In the RFE I was asking to have a way in the UI to decide which nic to use for gluster other than the MGMT net that is the one ovirt lets you use. There's another way to do this and it's from outside ovirt. There you have to unregister and re register the bricks using gluster console commands. This way, when you register the bricks, you can specify the IP address of the spare NIC and then the traffic will not interfere with the mgmt. There's a step that I don't recall much, but ovirt is going to need to know that the bricks are no longer is the mgmt IP, maybe someone else in the list can help with this. I can tell you that if you search the list you'll see my posts about this and the replys of those who helped my back then. Regards, ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I think that the possibility to add a separate storage network is a must. It doesn't make sense Gluster support if you can't separate management network traffic of storage network traffic. In 3.5 you can define management/vm/display/migration interfaces but not storage interfaces. Why? I don't know. But I think that Gluster support is incomplete without exclusive storage networking. Regards Federico ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Recommendations for Storage Pool sizes
I've been looking around for any best practices/recommendations on how large a storage domain can be but can't seem to find anything. For example, right now I have a 3TB domain made up of 3 1TB luns. That domain has about 200 thin disks created from it. When I want to add more space, is there any reason I should not simply increase the existing pool? Or is it better to create a new pool? Thanks, Ryan ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Balloon driver unavailable
That works because you have effectively disabled ballooning for the VM, which is not really solving the underlying problem. regards, John On 18/11/14 10:02, Groten, Ryan wrote: I also recently started getting these errors. They started when I upgraded from 3.4.0 to 3.4.2. The error appears on certain VMs (but not all) consistently every 15 minutes. It doesn’t matter if the “Memory Balloon Device Enabled” checkbox checked or unchecked. I got the message to stop appearing by changing the value of Physical Memory Guaranteed to match the VMs configured memory. *From:*users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *On Behalf Of *John Gardeniers *Sent:* November-16-14 10:13 PM *To:* users@ovirt.org *Subject:* Re: [ovirt-users] Balloon driver unavailable Just an FYI. In my case the balloon driver was installed and it was running. The problem was eventually resolved by uninstalling the entire agent suite, rebooting and reinstalling it. Doing the same just for the balloon driver didn't work. regards, John On 13/11/14 07:35, John Gardeniers wrote: I'm seeing it for a VM that most definitely does have the balloon driver installed. Care to take another guess? regards, John On 12/11/14 20:04, Amedeo Salvati wrote: you receive this error because on your cluster configurations you have checked Enable Memory Balloon Optimization, and on some of your VMs there aren't balloon driver available; if you don't want anymore this warning messages you can uncheck this under Clusters - (select your cluster) edit - Optimization - uncheck Enable Memory Balloon Optimization Best Regards Amedeo Salvati Date: Wed, 12 Nov 2014 07:59:33 + From: Karli Sj?berg karli.sjob...@slu.se mailto:karli.sjob...@slu.se To: tdeme...@itsmart.hu mailto:tdeme...@itsmart.hu tdeme...@itsmart.hu mailto:tdeme...@itsmart.hu Cc: users@ovirt.org mailto:users@ovirt.org users@ovirt.org mailto:users@ovirt.org Subject: Re: [ovirt-users] Balloon driver unavailable Message-ID: 5F9E965F5A80BC468BE5F40576769F099DF97243@exchange2-1 Content-Type: text/plain; charset=utf-8 On Wed, 2014-11-12 at 08:35 +0100, Demeter Tibor wrote: Hi, I have a lot of centos 6 based vms and I have install ovirt guest agent for those vms. But two vm always say The balloon driver on xxxvm on hostX is requested but unavailable I did check the virtio_balloon module are loaded on vms. Anybody can me help? Thanks in advance Tibor I see that too, but only on Windows 2008 R2 guests... No one else ever said anything about it, so I thought it was just me:) __ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com __ ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users __ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com __ ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users __ This email has been scanned by the Symantec Email Security.cloud service. For more information please visit http://www.symanteccloud.com __ ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Gluster access tied to one node?
So this may be a dumb question, but here goes... I set up a replicated Gluster volume for VM disk image storage. I specified the path as node9:gluster1 (where node9 is one of the two nodes with a brick). However, when I shut down node9, the VM using that storage automatically gets paused. I thought the replicated storage was supposed to work even if one node was down. Is there some other way to specify the path (did I do that wrong)? -- Chris Adams c...@cmadams.net ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Engine is still unreachable
Hi, can you access Engine webadmin with this ERROR message? 2014-11-18 19:45 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi!, I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says: (1, 2, 3)[1]: 1 [ ERROR ] Engine is still unreachable Engine health status page is not yet reachable. To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup what should I do? how to fix this? Thanks in advance, sandvik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] How to Use VLAN?
Hi,all Recently I test the VLAN and have some problems. I configure the Logical network “testvlan” with “VLAN tagged” and assigned it to hosts’ NIC. Then I create a VM using “testvlan” and found the vm can’t get IP . Does anyone have some ideas about VLAN? p.s. I already configure the switch port as TRUNK mode and the vlan id is 1 (default value). ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] 答复: Engine is still unreachable
Hi, Chou It seems your rhevm is not setup successfully. I suggest you can think about the two possible root cause below: 1. your /etc/hosts about host/rhevm-vm is configured correctly? 2. your password set in hosted-engine –deploy and rhevm-setup is same ? If those are not your problem cause, Please provide more log about it. 发件人: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] 代表 Coffee Chou 发送时间: 2014年11月19日 10:08 收件人: Sandvik Agustin 抄送: users@ovirt.org 主题: Re: [ovirt-users] Engine is still unreachable Hi, can you access Engine webadmin with this ERROR message? 2014-11-18 19:45 GMT+08:00 Sandvik Agustin agustinsand...@gmail.commailto:agustinsand...@gmail.com: Hi!, I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says: (1, 2, 3)[1]: 1 [ ERROR ] Engine is still unreachable Engine health status page is not yet reachable. To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup what should I do? how to fix this? Thanks in advance, sandvik ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] 答复: Engine is still unreachable
Hi, Chao You may make a mistake, that's not my setup :-) But i don't think it's a problem of password. If the passwords were not the same, it will throw an ERROR of: [ ERROR ] Cannot automatically add the host to cluster None: HTTP Status 401 [ ERROR ] Failed to execute stage 'Closing up': Cannot add the host to cluster None so, i guess, maybe Sandvik's setup is still not accessable ? 2014-11-19 11:12 GMT+08:00 Xie, Chao xiec.f...@cn.fujitsu.com: Hi, Chou It seems your rhevm is not setup successfully. I suggest you can think about the two possible root cause below: 1. your /etc/hosts about host/rhevm-vm is configured correctly? 2. your password set in hosted-engine –deploy and rhevm-setup is same ? If those are not your problem cause, Please provide more log about it. *发件人:* users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] *代表 *Coffee Chou *发送时间:* 2014年11月19日 10:08 *收件人:* Sandvik Agustin *抄送:* users@ovirt.org *主题:* Re: [ovirt-users] Engine is still unreachable Hi, can you access Engine webadmin with this ERROR message? 2014-11-18 19:45 GMT+08:00 Sandvik Agustin agustinsand...@gmail.com: Hi!, I have install ovirt 3.4 on centos 6.6 following this documentation http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/ I have already completed the installation of ovirt engine inside of the vm, when going back to hosted-engine --deploy terminal and choosing 1 the hosted-engine --deploy says: (1, 2, 3)[1]: 1 [ ERROR ] Engine is still unreachable Engine health status page is not yet reachable. To continue make a selection from the options below: (1) Continue setup - engine installation is complete (2) Power off and restart the VM (3) Abort setup what should I do? how to fix this? Thanks in advance, sandvik ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION NEEDED] oVirt 3.5.1 RC status - branching
Hi, We're going to start composing oVirt 3.5.1 RC on *2014-11-25 08:00 UTC* from 3.5 branch. In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. Maintainers: - Please be sure that 3.5 snapshot allow to create VMs before *2014-11-24 15:00 UTC* - Please be sure that no pending patches are going to block the release before *2014-11-24 15:00 UTC* - If any patch must block the RC release please raise the issue as soon as possible. A bug tracker [1] has been opened and shows 2 open blocker: Bug ID Whiteboard Status Summary 1164218 POSTglfs_set_volfile_server() method causes segmentation fault when bad arguments are passed. 1159839 storage POSTNew FC LUNs are not detected on hypervisor without a reboot 1162640 gluster POSTsupervdsm segfault in libgfapi while querying volume status detail 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile The following bugs have been keyworded as Regression and not marked as blockers: Bug ID Whiteboard Status Summary 1162640 gluster POSTsupervdsm segfault in libgfapi while querying volume status detail 1164215 infra NEW vdsm sos plugin doesn't work 1159314 sla NEW Error accessing ha metadata while deploying second host 1138144 storage NEW [BLOCKED]Failed to autorecover storage domain after unblocking connection with host 1118349 storage NEW [vdsm] Creating DataCenter 3.5 using master domain V1 fails with InquireNotSupportedError There are still 150 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 123 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please review bugs marked as Regression and add to blocker if they're real regressions. - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Hi, Release criteria discussion started on 2014-10-22 and should have ended last week as per current release process [1]. Since oVirt sync meeting wasn't held last week, it has been postponed to today 2014-11-19. Current options are: 1) keeping the same release criteria we had for 3.5 [2] 2) review the proposed changes [3] and prepare new release criteria for 3.6 Release management for 3.6.0 has been created [4] The key milestones for this release must be scheduled: Key Milestones Release criteria discussion start: 2014-10-22 Release criteria ready: 2014-11-19 Feature freeze: 60 Days before release First Test Day: 45 days before release Release Candidate: 30 days before release Release: 6 months after oVirt 3.5.0 release External Project Schedules Fedora 21: 2014-12-09 Fedora 22: 2015-XX-XX GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 Two different proposals have been made about above scheduling [5]: 1) extend the cycle to 10 months for allowing to include a large feature set 2) reduce the cycle to less than 6 months and split features over 3.6 and 3.7 Feature proposed for 3.6.0 must now be collected in the 3.6 google doc [9] and reviewed by maintainers. A tracker bug for 3.6.0 has been created [6] and currently shows no blockers. There are 412 bugs [7] targeted to 3.6.0. Excluding node and documentation bugs we have 392 bugs [8] targeted to 3.6.0. [1] http://www.ovirt.org/Release_process [2] http://www.ovirt.org/OVirt_3.5_release-management#Release_Criteria [3] http://lists.ovirt.org/pipermail/devel/2014-September/008695.html [4] http://www.ovirt.org/OVirt_3.6_Release_Management [5] http://lists.ovirt.org/pipermail/users/2014-November/028875.html [6] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [7] http://goo.gl/zwkF3r [8] http://goo.gl/ZbUiMc [9] http://goo.gl/9X3G49 -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Gluster access tied to one node?
tried localhost:gluster1? On Tue, Nov 18, 2014 at 11:11 PM, Chris Adams c...@cmadams.net wrote: So this may be a dumb question, but here goes... I set up a replicated Gluster volume for VM disk image storage. I specified the path as node9:gluster1 (where node9 is one of the two nodes with a brick). However, when I shut down node9, the VM using that storage automatically gets paused. I thought the replicated storage was supposed to work even if one node was down. Is there some other way to specify the path (did I do that wrong)? -- Chris Adams c...@cmadams.net ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users