[ovirt-users] Re: error failed to execute stage 'misc configuration': failed to start service 'openvswitch'
On Fri, Mar 8, 2019 at 11:36 AM Dafna Ron wrote: > > infra list is for infra issues only. > forwarding to users group email which should be the correct address for your > question. > > On Thu, Mar 7, 2019 at 9:05 PM wrote: >> >> I'm starting in the world of ovirt, so I would appreciate the help >> I'm trying to install ovirt-engine and it gives me the following error >> >> error failed to execute stage 'misc configuration': failed to start service >> 'openvswitch' Please check/share the following logs on the engine machine: /var/log/ovirt-engine/setup/* /var/log/ovirt-engine/engine.log /var/log/messages Thanks and best regards, -- Didi ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PGAVDDDSZHZN6S2G6KSKVFSPZH76XORB/
[ovirt-users] "gluster-ansible-roles is not installed on Host" error on Cockpit
On a new 4.3.1 oVirt Node installation, when trying to deploy HCI
(also when trying adding a new gluster volume to existing clusters)
using Cockpit, an error is displayed "gluster-ansible-roles is not
installed on Host. To continue deployment, please install
gluster-ansible-roles on Host and try again". There is no package
named gluster-ansible-roles in the repositories:
[root@localhost ~]# yum install gluster-ansible-roles
Loaded plugins: enabled_repos_upload, fastestmirror, imgbased-persist,
package_upload, product-id, search-disabled-repos,
subscription-manager, vdsmupgrade
This system is not registered with an entitlement server. You can use
subscription-manager to register.
Loading mirror speeds from cached hostfile
* ovirt-4.3-epel: mirror.horizon.vn
No package gluster-ansible-roles available.
Error: Nothing to do
Uploading Enabled Repositories Report
Cannot upload enabled repos report, is this client registered?
This is due to check introduced here:
https://gerrit.ovirt.org/#/c/98023/1/dashboard/src/helpers/AnsibleUtil.js
Changing the line from:
[ "rpm", "-qa", "gluster-ansible-roles" ], { "superuser":"require" }
to
[ "rpm", "-qa", "gluster-ansible" ], { "superuser":"require" }
resolves the issue. The above code snippet is installed at
/usr/share/cockpit/ovirt-dashboard/app.js on oVirt node and can be
patched by running "sed -i 's/gluster-ansible-roles/gluster-ansible/g'
/usr/share/cockpit/ovirt-dashboard/app.js && systemctl restart
cockpit"
___
Users mailing list -- users@ovirt.org
To unsubscribe send an email to users-le...@ovirt.org
Privacy Statement: https://www.ovirt.org/site/privacy-policy/
oVirt Code of Conduct:
https://www.ovirt.org/community/about/community-guidelines/
List Archives:
https://lists.ovirt.org/archives/list/users@ovirt.org/message/243QJOXO2KTWYU5CDH3OC7WJ6Z2EL4CG/
[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent
Hello again, Latest update: the engine is up and running (or at least the login portal). [root@ovirt1 ~]# hosted-engine --check-livelinessHosted Engine is up! I have found online the xml for the network: [root@ovirt1 ~]# cat ovirtmgmt_net.xml vdsm-ovirtmgmt Sadly, I had to create a symbolic link to the main disk in /var/run/vdsm/storage , as it was missing. So, what's next. Issues up to now:2 OVF - 0 bytesProblem with local copy of the HostedEngine config - used xml from an old vdsm logMissing vdsm-ovirtmgmt definitionNo link for the main raw disk in /var/run/vdsm/storage . Can you hint me how to recover the 2 OVF tars now ? Best Regards,Strahil Nikolov ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/57QC4DEXCVF6AEIDFDLDBYSPZQIYJGOR/
[ovirt-users] OKD / Openshift under oVirt
I have ovirt currently running with 3 hyper-converged nodes, and loving it. I've had some issues with kubernetes and would prefer to try out openshift / OKD, but the trick is i'd like to do it in a fault-tolerant way, with a load balancer, 2 masters and 3 works, but I can't seem to find a good way to do it, is there anyone that can offer help? I tried using what was posted to the blog, but it was a single-node install and was never updated with part 2. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/R2A43PIZKFD4HZNB4OTETBXGCBAI5JRP/
[ovirt-users] Re: Timestamp offset in engine.log
> Le 7 mars 2019 à 15:26, Ian Fraser a écrit : > > Hello, > > I am trying to follow the instructions for installing the metrics store > and a prerequisite is ensuring the timestamps in /var/log/ovirt- > engine/engine.log include a UTC offset (at bottom of this page: > https://www.ovirt.org/documentation/metrics-install-guide/Introduction.html > ). Mine currently do not (i.e. they look like "2019-03-07 > 14:14:23,223Z"). Z is a UTC offset, it's an alias to +00:00 ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/H6M5SHE24MIVXWHQ6YVKPRZS4KLPV5M4/
[ovirt-users] Re: Windows 10 - Ovirt 4.3 - EPYC
This is what I'm experiencing. https://bugzilla.redhat.com/show_bug.cgi?id=1592276 On Sat, Feb 2, 2019, 4:39 AM Dominik Holler wrote: > On Fri, 1 Feb 2019 17:37:30 -0500 > Darin Schmidt wrote: > > > [root@ovirt ~]# rpm -qa kernel > > kernel-3.10.0-957.1.3.el7.x86_64 > > kernel-3.10.0-862.el7.x86_64 > > [root@ovirt ~]# uname -a > > Linux ovirt 3.10.0-957.1.3.el7.x86_64 #1 SMP Thu Nov 29 14:49:43 UTC 2018 > > https://bugzilla.redhat.com/1638835 looks like there is at least > kernel 3.10.0-957.3.1.el7.x86_64 required. > Can you please check if upgrading to kernel solves the issue for you? > I expectect at least kernel 3.10.0-957.5.1 to be availible. > > > x86_64 x86_64 x86_64 GNU/Linux > > [root@ovirt ~]# rpm -qa qemu-kvm-ev > > qemu-kvm-ev-2.12.0-18.el7_6.3.1.x86_64 > > [root@ovirt ~]# rpm -qa libvirt > > libvirt-4.5.0-10.el7_6.3.x86_64 > > > here is the vdsm > > > > contains: > Hyper-V SynIC is not supported by kernel > > > > On Fri, Feb 1, 2019 at 3:05 PM Dominik Holler > > wrote: > > > > > On Fri, 1 Feb 2019 11:48:51 -0500 > > > Darin Schmidt wrote: > > > > > > > I have successfully setup a centos vm, its up and running. Now I > > > > need to setup a windows 10 VM and I cant seem to get anything to > > > > work. > > > > > > > > Ive tried setting the OS type to other or Windows 10 64bit. With > > > > Windows 64bit, it fails to startup at all When I select > > > > OtherOS it will allow me to start to run the Windows ISO, but > > > > then fails after a few seconds as well. Is there something I'm > > > > not correctly configuring? > > > > > > Would you please share vdsm.log, and the output of > > > rpm -qa kernel > > > uname -a > > > rpm -qa qemu-kvm-ev > > > rpm -qa libvirt > > > from of the host, and the relevant part of engine.log? > > > > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QVR3TFBZ57FFIV2BWC52DUHVNBP2MDHW/
[ovirt-users] Re: Ovirt 4.3.1 problem with HA agent
Hi Simone,
and thanks for your help.
So far I found out that there is some problem with the local copy of the
HostedEngine config (see attached part of vdsm.log).
I have found out an older xml configuration (in an old vdsm.log) and defining
the VM works, but powering it on reports:
[root@ovirt1 ~]# virsh define hosted-engine.xmlDomain HostedEngine defined from
hosted-engine.xml
[root@ovirt1 ~]# virsh list --all Id Name
State - HostedEngine
shut off
[root@ovirt1 ~]# virsh start HostedEngineerror: Failed to start domain
HostedEngineerror: Network not found: no network with matching name
'vdsm-ovirtmgmt'
[root@ovirt1 ~]# virsh net-list --all Name State Autostart
Persistent--
;vdsmdummy; active no no default inactive
no yes
[root@ovirt1 ~]# brctl showbridge name bridge id STP enabled
interfaces;vdsmdummy; 8000. noovirtmgmt
8000.bc5ff467f5b3 no enp2s0
[root@ovirt1 ~]# ip a s1: lo: mtu 65536 qdisc noqueue
state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever
preferred_lft forever inet6 ::1/128 scope host valid_lft forever
preferred_lft forever2: enp2s0: mtu 9000
qdisc mq master ovirtmgmt state UP group default qlen 1000 link/ether
bc:5f:f4:67:f5:b3 brd ff:ff:ff:ff:ff:ff3: ovs-system: mtu
1500 qdisc noop state DOWN group default qlen 1000 link/ether
f6:78:c7:2d:32:f9 brd ff:ff:ff:ff:ff:ff4: br-int: mtu
1500 qdisc noop state DOWN group default qlen 1000 link/ether
66:36:dd:63:dc:48 brd ff:ff:ff:ff:ff:ff20: ovirtmgmt:
mtu 9000 qdisc noqueue state UP group default
qlen 1000 link/ether bc:5f:f4:67:f5:b3 brd ff:ff:ff:ff:ff:ff inet
192.168.1.90/24 brd 192.168.1.255 scope global ovirtmgmt valid_lft
forever preferred_lft forever inet 192.168.1.243/24 brd 192.168.1.255 scope
global secondary ovirtmgmt valid_lft forever preferred_lft forever
inet6 fe80::be5f:f4ff:fe67:f5b3/64 scope link valid_lft forever
preferred_lft forever21: ;vdsmdummy;: mtu 1500 qdisc noop
state DOWN group default qlen 1000 link/ether ce:36:8d:b7:64:bd brd
ff:ff:ff:ff:ff:ff
192.168.1.243/24 is the one of the IPs in ctdb..
So , now comes the question - is there an xml in the logs that defines the
network ?My hope is to power up the HostedEngine properly and hope that it will
push all the configurations to the right places ... maybe this is way too
optimistic.
At least I have learned a lot for oVirt.
Best Regards,Strahil Nikolov
В четвъртък, 7 март 2019 г., 17:55:12 ч. Гринуич+2, Simone Tiraboschi
написа:
On Thu, Mar 7, 2019 at 2:54 PM Strahil Nikolov wrote:
>The OVF_STORE volume is going to get periodically recreated by the engine so
>at least you need a running engine.
>In order to avoid this kind of issue we have two OVF_STORE disks, in your case:
>MainThread::INFO::2019-03-06
>06:50:02,391::ovf_store::120::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
> Found >OVF_STORE: imgUUID:441abdc8-6cb1-49a4-903f-a1ec0ed88429,
>volUUID:c3309fc0-8707-4de1-903d-8d4bbb024f81>MainThread::INFO::2019-03-06
>06:50:02,748::ovf_store::120::ovirt_hosted_engine_ha.lib.ovf.ovf_store.OVFStore::(scan)
> Found >OVF_STORE: imgUUID:94ade632-6ecc-4901-8cec-8e39f3d69cb0,
>volUUID:9460fc4b-54f3-48e3-b7b6-da962321ecf4
>Can you please check if you have at lest the second copy?
Second Copy is empty too:[root@ovirt1 ~]# ll
/rhev/data-center/mnt/glusterSD/ovirt1.localdomain:_engine/808423f9-8a5c-40cd-bc9f-2568c85b8c74/images/441abdc8-6cb1-49a4-903f-a1ec0ed88429
total 66561
-rw-rw. 1 vdsm kvm 0 Mar 4 05:23 c3309fc0-8707-4de1-903d-8d4bbb024f81
-rw-rw. 1 vdsm kvm 1048576 Jan 31 13:24
c3309fc0-8707-4de1-903d-8d4bbb024f81.lease
-rw-r--r--. 1 vdsm kvm 435 Mar 4 05:24
c3309fc0-8707-4de1-903d-8d4bbb024f81.meta
>And even in the case you lost both, we are storing on the shared storage the
>initial vm.conf:>MainThread::ERROR::2019-03-06
>>06:50:02,971::config_ovf::70::ovirt_hosted_engine_ha.agent.hosted_engine.HostedEngine.config.vm::>(_get_vm_conf_content_from_ovf_store)
> Failed extracting VM OVF from the OVF_STORE volume, falling back to initial
>vm.conf
>Can you please check what do you have in
>/var/run/ovirt-hosted-engine-ha/vm.conf ? It exists and has the following:
[root@ovirt1 ~]# cat /var/run/ovirt-hosted-engine-ha/vm.conf
# Editing the hosted engine VM is only possible via the manager UI\API
# This file was generated at Thu Mar 7 15:37:26 2019
vmId=8474ae07-f172-4a20-b516-375c73903df7
memSize=4096
display=vnc
devices={index:2,iface:ide,address:{ controller:0, target:0,unit:0, bus:1,
[ovirt-users] Bandwidth problem
Hello Everyone, I have 10Gb connections setup for all the hosts in the cluster, for both management/vm and gluster traffic ( separate network cards ) The problem is that i just cannot pass 1Gb/s traffic between vms ( even between vms running on the same hosts ! - which makes the things more weird... ). Traffic measured by using iperf tool. Is there a way I can check waht could be the problem ? Network card type, vm drivers, any suggestion ? I just do not know where to look for a possible cause. Thank you very much ! Leo -- Best regards, Leo David ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/IVBUE56TB5E3CNSKRGR7TCTTX6IKKHXJ/
[ovirt-users] Re: oVirt 4.3.1 with AD creates new user at every login
> I just did a clean install of oVirt 4.3.1 (engine and nodes). > > I setup AD authentication and gave an AD group permissions needed work with > VMs. I gave them PowerUserRole on the Cluster and Storage. > > Users in the AD group can login and create VMs but after they log out and > log back in they don't see any of the VMs created in the previous session. > > I noticed that in Administration -> Users a new row is created for each > user every time they login. All columns for each user are the same: same > first and last name, same user name, authorization provider, and so on but > the behavior looks very much like they are being treated as new user every > time they login. I have observed the same behaviour with oVirt 4.3.XY Delving deeper, in the oVirt engine 'users' table, external_id is *not* being set for AD users as documented in (e.g.) engines/packaging/dbscripts/common_sp.sql "The external identifier is the user identifier converted to an array of bytes:" ovirt 4.3.0 user@domain | f3de0b27-c2a0-463b-a2ff-d480bd88c77f | ece7b8c2-4983-4c1e-9a33-c28d58d40213 And under ovirt 4.2.8 for comparison: username | user_id| external_id user@domain | 364d176e-8813-4e67-bdd0-dc10b823d23c | af5bbg/eTkuktBPXW4Ak5g== Further information on replicating the issue: 1) Configure LDAP authentication: https://www.ovirt.org/documentation/admin-guide/chap-Users_and_Roles.html#configuring-an-external-ldap-provider 2) Add an LDAP group via the Administration Portal: Administration >> Users > 'Add' button, click 'Group' radio-button, select the relevant LDAP authorization select the relevant LDAP authorization provider in the drop-down list under 'Search', enter the LDAP group in the search text-box then click 'GO'. The found group should appear below. Select the toggle-button to the left of the group then click 'Add and Close'. 3) Add SuperUser system permission for the LDAP group. Back under Administration >> Users, click the 'Group' button if groups are not already displayed. Click on the LDAP group added in the previous step then click 'Permissions' -> 'Add System Permissions' 4) Log into the Administration Portal as an LDAP group member. Logout then log back into the Administration Portal as a member of the LDAP group specified above. Login should be successful because that user will inherit the SuperUser system permission but note the following issues below: - under Administration >> Users, note that a 'User' icon is displayed for the LDAP user rather than an 'Admin' icon. This is in contrast to 4.2.8, where an Admin icon would be displayed. 5) Repeat step 4 above. If you logout then log back into the Administration Portal as the same member of the LDAP group specified above then check Administration >> Users, an additional user entry appears: same First Name, Last Name, Authorization provider, Namespace and E-mail. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PC2JLU65QED36MLLN7I5BJEPYEADKUO2/
