Re: [ovirt-users] Adding host for the first time - Power Management?

[Colin Coe]

If you log in to the blade enclosure OA (onboard administrator) via the web
interface:
- Expand Enclosure Information
- Expand Device Bays
- Expand the required server
- Click on iLO
- Click Web Administration link (a new browser window will appear)
- Expand Administration
- Select User Administration

At this point you should be able to add, remove, edit users including
resetting passwords and defining permissions.





On Sun, Sep 10, 2017 at 1:46 PM, Ling Ho  wrote:

> Hi Mark,
>
> I don't have experience with Gen 9 blade, but it might be the same as Gen
> 9 DL3xx servers.
>
> If you can log on to the host, you can run ipmitool to find out which user
> is set up.
>
> You will need ipmitool and OpenIPMI packages installed.
>
> then
>
> systemctl start ipmi
> or
> service ipmi start
>
> ipmitool user list 2
>
> Of course you can't retrieve the password, but you can check your password
> using this command:
>
> ipmitool user test  
>
> or reset the password
>
> ipmitool user set password  
>
> You can also use ipmitool to set the ip address of ILO if you do not wish
> to reboot the node and get to the ILO interface via console.
>
> ...
> ling
>
>
>
>
> On 9/8/17 3:38 AM, Mark Steele wrote:
>
> Hello,
>
> We have an existing 4 Host Ovirt 3.5 installation. I am adding two more HP
> Gen9 Blades to the configuration. I looked at how the power management is
> setup up in Ovirt for the first four blades and it appears to be configured
> for ilo4 using a user account that I cannot find documentation for anywhere
> within my infrastructure.
>
> Questions:
>
> - is this user / password defined on the blade somewhere (perhaps like an
> IPMI setup)?
> - is anyone familiar with where I set this up on an HP Blade?
>
> I'd like to get this configured before it goes into production as I assume
> this requires access to the blade bios / setup to properly configure.
>
> Best regards,
>
> ***
> *Mark Steele*
> CIO / VP Technical Operations | TelVue Corporation
> TelVue - We Share Your Vision
> 16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
> 800.885.8886 x128 <(800)%20885-8886> | mste...@telvue.com | http://
> www.telvue.com
> twitter: http://twitter.com/telvue | facebook: https://www.
> facebook.com/telvue
>
>
> ___
> Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Adding host for the first time - Power Management?

[Ling Ho]

Hi Mark,

I don't have experience with Gen 9 blade, but it might be the same as 
Gen 9 DL3xx servers.


If you can log on to the host, you can run ipmitool to find out which 
user is set up.


You will need ipmitool and OpenIPMI packages installed.

then

systemctl start ipmi
or
service ipmi start

ipmitool user list 2

Of course you can't retrieve the password, but you can check your 
password using this command:


ipmitool user test  

or reset the password

ipmitool user set password  

You can also use ipmitool to set the ip address of ILO if you do not 
wish to reboot the node and get to the ILO interface via console.


...
ling



On 9/8/17 3:38 AM, Mark Steele wrote:

Hello,

We have an existing 4 Host Ovirt 3.5 installation. I am adding two 
more HP Gen9 Blades to the configuration. I looked at how the power 
management is setup up in Ovirt for the first four blades and it 
appears to be configured for ilo4 using a user account that I cannot 
find documentation for anywhere within my infrastructure.


Questions:

- is this user / password defined on the blade somewhere (perhaps like 
an IPMI setup)?

- is anyone familiar with where I set this up on an HP Blade?

I'd like to get this configured before it goes into production as I 
assume this requires access to the blade bios / setup to properly 
configure.


Best regards,

***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
800.885.8886 x128 | mste...@telvue.com  | 
http://www.telvue.com 
twitter: http://twitter.com/telvue | facebook: 
https://www.facebook.com/telvue



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Adding host for the first time - Power Management?

[Mark Steele]

Hello,

We have an existing 4 Host Ovirt 3.5 installation. I am adding two more HP
Gen9 Blades to the configuration. I looked at how the power management is
setup up in Ovirt for the first four blades and it appears to be configured
for ilo4 using a user account that I cannot find documentation for anywhere
within my infrastructure.

Questions:

- is this user / password defined on the blade somewhere (perhaps like an
IPMI setup)?
- is anyone familiar with where I set this up on an HP Blade?

I'd like to get this configured before it goes into production as I assume
this requires access to the blade bios / setup to properly configure.

Best regards,

***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
16000 Horizon Way, Suite 100 | Mt. Laurel, NJ 08054
800.885.8886 x128 | mste...@telvue.com | http://www.telvue.com
twitter: http://twitter.com/telvue | facebook:
https://www.facebook.com/telvue
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users