Re: [ovirt-users] OVN between two different datacenters with different networks
Very big thanks, In your solution I want fix only one... " tunneling-IP is IP-of-host-of-engine-2" For me - works variant is IP of host2 , which can provides access to engine1 Василий Ламыкин Старший инженер по эксплуатации сетевых сервисов Центра управления сетью Столица Единый Центр управления сетью +7 (925) 696-1032 -Original Message- From: Dominik Holler [mailto:dhol...@redhat.com] Sent: Tuesday, April 10, 2018 6:08 PM To: Vasily Lamykin (GNOC) Cc: users@ovirt.org Subject: Re: [ovirt-users] OVN between two different datacenters with different networks On Tue, 10 Apr 2018 11:48:50 + Vasily Lamykin wrote: > Hi, all > I try to configure ovn in engine, what I do by step: > 1.Created network test1 with external ovn provider on engine1 > 2.Created subnet for this network 3.Connect engine2 to engine1 ovn > provider(through “add provider”) 4.Successfully imported network test1 > on engine2 5.I see subnet’s on all engines 6.Created 2 VM with nic in > network test1 on both engines 7.Assigned ips from one > subnet(192.168.10.0/24) to all VMs > The subnet is used to configure OVN's internal DHCP server. This means you use DHCP to assign IPs to the vNICs, which is already a good test if the VM is connected as expected. > Expected results: VM from engine1 can ping VM from engine2 in same > subnet in ovn network test1 > > Now, I don’t have ping ability between two VMs > > ovn-nbctl show > switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) > port b580d44d-e616-42dd-9e17-63983d0f91e5 > addresses: ["00:1a:4a:16:01:01 dynamic"] > port cfd5f32c-00a7-419e-8bbe-27518a4c74dc > addresses: ["00:1a:4a:16:01:00 dynamic"] > > node from engine1 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever preferred_lft > forever > > node from engine2 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever preferred_lft > forever > > How can I do ovn connection? What I did wrong? > Please note that per host only a single OVN central is supported! Please check via sudo ovn-sbctl show on engine1 if both hosts are connected to OVN central engine1. Probably the host of engine2 is configured to use engine2 as it's OVN central. Probable the host of engine2 has to be connected to OVN central engine1 and the tunneling interface might require some configuration. Both is handled by executing /usr/libexec/ovirt-provider-ovn/setup_ovn_controller.sh \ IP-central tunneling-IP key_file cert_file ca_file on the host. Probably IP-central is IP-of-engine1 tunneling-IP is IP-of-host-of-engine-2 and key_file cert_file ca_file has to be stolen from host of engine1 and copied in a new location on host2 and configured on host2. > > > Информация в этом сообщении предназначена исключительно для конкретных > лиц, которым она адресована. В сообщении может содержаться > конфиденциальная информация, которая не может быть раскрыта или > использована кем-либо, кроме адресатов. Если вы не адресат этого > сообщения, то использование, переадресация, копирование или > распространение содержания сообщения или его части незаконно и > запрещено. Если Вы получили это сообщение ошибочно, пожалуйста, > незамедлительно сообщите отправителю об этом и удалите со всем > содержимым само сообщение и любые возможные его копии и приложения. > > The information contained in this communication is intended solely for > the use of the individual or entity to whom it is addressed and others > authorized to receive it. It may contain confidential or legally > privileged information. The contents may not be disclosed or used by > anyone other than the addressee. If you are not the intended > recipient(s), any use, disclosure, copying, distribution or any action > taken or omitted to be taken in reliance on it is prohibited and may > be unlawful. If you have received this communication in error please > notify us immediately by responding to this email and then delete the > e-mail and all attachments and any copies thereof. > > - ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] OVN between two different datacenters with different networks
On Tue, 10 Apr 2018 11:48:50 + Vasily Lamykin wrote: > Hi, all > I try to configure ovn in engine, what I do by step: > 1.Created network test1 with external ovn provider on engine1 > 2.Created subnet for this network > 3.Connect engine2 to engine1 ovn provider(through “add provider”) > 4.Successfully imported network test1 on engine2 > 5.I see subnet’s on all engines > 6.Created 2 VM with nic in network test1 on both engines > 7.Assigned ips from one subnet(192.168.10.0/24) to all VMs > The subnet is used to configure OVN's internal DHCP server. This means you use DHCP to assign IPs to the vNICs, which is already a good test if the VM is connected as expected. > Expected results: VM from engine1 can ping VM from engine2 in same > subnet in ovn network test1 > > Now, I don’t have ping ability between two VMs > > ovn-nbctl show > switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) > port b580d44d-e616-42dd-9e17-63983d0f91e5 > addresses: ["00:1a:4a:16:01:01 dynamic"] > port cfd5f32c-00a7-419e-8bbe-27518a4c74dc > addresses: ["00:1a:4a:16:01:00 dynamic"] > > node from engine1 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever > preferred_lft forever > > node from engine2 with testVM > vnet0: mtu 1500 qdisc pfifo_fast > master ovs-system state UNKNOWN qlen 1000 link/ether > fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 > fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever > preferred_lft forever > > How can I do ovn connection? What I did wrong? > Please note that per host only a single OVN central is supported! Please check via sudo ovn-sbctl show on engine1 if both hosts are connected to OVN central engine1. Probably the host of engine2 is configured to use engine2 as it's OVN central. Probable the host of engine2 has to be connected to OVN central engine1 and the tunneling interface might require some configuration. Both is handled by executing /usr/libexec/ovirt-provider-ovn/setup_ovn_controller.sh \ IP-central tunneling-IP key_file cert_file ca_file on the host. Probably IP-central is IP-of-engine1 tunneling-IP is IP-of-host-of-engine-2 and key_file cert_file ca_file has to be stolen from host of engine1 and copied in a new location on host2 and configured on host2. > > > Информация в этом сообщении предназначена исключительно для > конкретных лиц, которым она адресована. В сообщении может содержаться > конфиденциальная информация, которая не может быть раскрыта или > использована кем-либо, кроме адресатов. Если вы не адресат этого > сообщения, то использование, переадресация, копирование или > распространение содержания сообщения или его части незаконно и > запрещено. Если Вы получили это сообщение ошибочно, пожалуйста, > незамедлительно сообщите отправителю об этом и удалите со всем > содержимым само сообщение и любые возможные его копии и приложения. > > The information contained in this communication is intended solely > for the use of the individual or entity to whom it is addressed and > others authorized to receive it. It may contain confidential or > legally privileged information. The contents may not be disclosed or > used by anyone other than the addressee. If you are not the intended > recipient(s), any use, disclosure, copying, distribution or any > action taken or omitted to be taken in reliance on it is prohibited > and may be unlawful. If you have received this communication in error > please notify us immediately by responding to this email and then > delete the e-mail and all attachments and any copies thereof. > > - ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] OVN between two different datacenters with different networks
Hi, all I try to configure ovn in engine, what I do by step: 1.Created network test1 with external ovn provider on engine1 2.Created subnet for this network 3.Connect engine2 to engine1 ovn provider(through “add provider”) 4.Successfully imported network test1 on engine2 5.I see subnet’s on all engines 6.Created 2 VM with nic in network test1 on both engines 7.Assigned ips from one subnet(192.168.10.0/24) to all VMs Expected results: VM from engine1 can ping VM from engine2 in same subnet in ovn network test1 Now, I don’t have ping ability between two VMs ovn-nbctl show switch 54beaa3c-de8f-435f-b132-8542ddeb4b4b (test-ovn-phys) port b580d44d-e616-42dd-9e17-63983d0f91e5 addresses: ["00:1a:4a:16:01:01 dynamic"] port cfd5f32c-00a7-419e-8bbe-27518a4c74dc addresses: ["00:1a:4a:16:01:00 dynamic"] node from engine1 with testVM vnet0: mtu 1500 qdisc pfifo_fast master ovs-system state UNKNOWN qlen 1000 link/ether fe:1a:4a:16:01:01 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc1a:4aff:fe16:101/64 scope link valid_lft forever preferred_lft forever node from engine2 with testVM vnet0: mtu 1500 qdisc pfifo_fast master ovs-system state UNKNOWN qlen 1000 link/ether fe:1a:4a:16:01:00 brd ff:ff:ff:ff:ff:ff inet6 fe80::fc1a:4aff:fe16:100/64 scope link valid_lft forever preferred_lft forever How can I do ovn connection? What I did wrong? Информация в этом сообщении предназначена исключительно для конкретных лиц, которым она адресована. В сообщении может содержаться конфиденциальная информация, которая не может быть раскрыта или использована кем-либо, кроме адресатов. Если вы не адресат этого сообщения, то использование, переадресация, копирование или распространение содержания сообщения или его части незаконно и запрещено. Если Вы получили это сообщение ошибочно, пожалуйста, незамедлительно сообщите отправителю об этом и удалите со всем содержимым само сообщение и любые возможные его копии и приложения. The information contained in this communication is intended solely for the use of the individual or entity to whom it is addressed and others authorized to receive it. It may contain confidential or legally privileged information. The contents may not be disclosed or used by anyone other than the addressee. If you are not the intended recipient(s), any use, disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this communication in error please notify us immediately by responding to this email and then delete the e-mail and all attachments and any copies thereof. - ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users