[ovirt-users] Gluster deployment - Arbiter volume - different disk size - volumes sizes
Hello, I have one more question for the gluster deployment. I have three servers with different disk sizes : - server1 : 3 x SSD configured in raid 5 mode for a total capacity of 900 GB - server2 : 6 x SSD configurerd in raid 6 mode for a total capacity of 2,2 TB - server3 : same as server2 (2,2TB) Because my server1 has less capacity than the others I will use it as an arbiter volume (during the deployment I will declare it as the last host : host3). Is-it correct ? So I will create 4 volumes : - engine : 50 GB type replicated without arbiter - data : ?? - vmstore : ??? - iso : 15 GB replicated with arbiter volume Can someone tell me what are the differences between data and vmstore volume ? In the earlier version there was only information about data volume and export volume. I found nothing about vmstore volume. If the wmstore is, as its name suggests, the place where all vm files will be stored including vm disks images, I think I have to set most of the capacity for this volume. So at the end my 4 volumes will be : - engine : 50 GB type replicated without arbiter - data : 500 TB replicated with arbiter volume - vmstore : 1,5 TB replicated with arbiter volume - iso : 15 GB replicated with arbiter volume What do you think of this ? Thanks, Florent ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/S6Q7D734NCFDS3CU736ZI5SM3GSWKAUC/
[ovirt-users] Re: upload ISO from webui failed,"Paused by System"
Hi,
1. Please check whether you have downloaded the CA certificate in your
browser (This can be found when accessing your engine -> Downloads -> CA
Certificate.
2. Please ensure you are not trying to upload the image via a WIFI
connection (If you are you this will cause the operation to pause and you
will need to resume it mulitple times)
3. Try to Resume the operation by highlighting the paused operation and
from the menu select to resume it.
If all these don't help please file a bug in bugzilla and provide the
engine.log (/var/log/ovirt-engine/engine.log on your engine and the
vdsm.log on your vdsm host /var/log/vdsm/vdsm.log)
Regards,
Kevin
On Tue, Sep 11, 2018 at 9:39 AM, wrote:
> Hi,
> I can't upload iso image from webui,always got "Paused by System"
> system info:
> engine:4.2.6.4-1.el7
> vdsm:4.20.35-1.el7
> imageio-proxy:1.4.4-0.el7
> imageio-daemon:1.4.4-0.el7
>
> operation:
> 1、download and install ca to the browser
> 2、select iso file to upload
> 3、click test ，alert to installl ca
> 4、install ca again（optional）
> 5、upload
> 6、wait and got "Paused by System"
>
> log：
> engine：
> 2018-09-11 11:13:22,273+08 INFO [org.ovirt.engine.core.
> vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
> (EE-ManagedThreadFactory-engine-Thread-61)
> [02c871da-a599-4201-9dd5-92a468dee952] START, HSMClearTaskVDSCommand(HostName
> = 21,
> HSMTaskGuidBaseVDSCommandParameters:{hostId='68f27646-da12-480b-9887-42ada2911132',
> taskId='90541bd1-65e7-4185-a051-3d8d9c1e3a5f'}), log id: 3ff168d7
> 2018-09-11 11:13:22,278+08 INFO [org.ovirt.engine.core.
> vdsbroker.vdsbroker.HSMClearTaskVDSCommand]
> (EE-ManagedThreadFactory-engine-Thread-61)
> [02c871da-a599-4201-9dd5-92a468dee952] FINISH, HSMClearTaskVDSCommand,
> log id: 3ff168d7
> 2018-09-11 11:13:22,278+08 INFO [org.ovirt.engine.core.
> vdsbroker.irsbroker.SPMClearTaskVDSCommand]
> (EE-ManagedThreadFactory-engine-Thread-61)
> [02c871da-a599-4201-9dd5-92a468dee952] FINISH, SPMClearTaskVDSCommand,
> log id: 43d30861
> 2018-09-11 11:13:22,280+08 INFO
> [org.ovirt.engine.core.bll.tasks.SPMAsyncTask]
> (EE-ManagedThreadFactory-engine-Thread-61)
> [02c871da-a599-4201-9dd5-92a468dee952]
> BaseAsyncTask::removeTaskFromDB: Removed task
> '90541bd1-65e7-4185-a051-3d8d9c1e3a5f'
> from DataBase
> 2018-09-11 11:13:22,280+08 INFO
> [org.ovirt.engine.core.bll.tasks.CommandAsyncTask]
> (EE-ManagedThreadFactory-engine-Thread-61)
> [02c871da-a599-4201-9dd5-92a468dee952]
> CommandAsyncTask::HandleEndActionResult [within thread]: Removing
> CommandMultiAsyncTasks object for entity '4ff92f68-8353-40ac-a7c5-
> f0efbd054841'
> 2018-09-11 11:13:26,098+08 INFO [org.ovirt.engine.core.bll.
> storage.disk.image.TransferImageStatusCommand] (default task-8)
> [352651c9-ddde-4e1e-b95c-05ad967ed0b1] Running command:
> TransferImageStatusCommand internal: false. Entities affected : ID:
> aaa0----123456789aaa Type: SystemAction group CREATE_DISK
> with role type USER
> 2018-09-11 11:13:28,836+08 INFO [org.ovirt.engine.core.bll.
> ConcurrentChildCommandsExecutionCallback]
> (EE-ManagedThreadFactory-engineScheduled-Thread-55)
> [02c871da-a599-4201-9dd5-92a468dee952] Command 'AddDisk' id:
> '4b72410d-e5a0-4c43-b7db-a5324a32d012' child commands
> '[4ff92f68-8353-40ac-a7c5-f0efbd054841]' executions were completed,
> status 'SUCCEEDED'
> 2018-09-11 11:13:28,836+08 INFO [org.ovirt.engine.core.bll.
> ConcurrentChildCommandsExecutionCallback]
> (EE-ManagedThreadFactory-engineScheduled-Thread-55)
> [02c871da-a599-4201-9dd5-92a468dee952] Command 'AddDisk' id:
> '4b72410d-e5a0-4c43-b7db-a5324a32d012' Updating status to 'SUCCEEDED',
> The command end method logic will be executed by one of its parent commands.
> 2018-09-11 11:13:28,862+08 INFO [org.ovirt.engine.core.bll.
> storage.disk.image.TransferDiskImageCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-55)
> [02c871da-a599-4201-9dd5-92a468dee952] Successfully added Upload disk
> 'oVirt-toolsSetup-4.2-1.el7.centos.iso' (disk id:
> '97179509-65eb-4b45-ad8e-ce112cfd016a', image id:
> '6ca217cc-015e-4d00-872a-faf60a8954ac') for image transfer command
> '4cdff02c-7fe4-4000-9c92-8ef613597d13'
> 2018-09-11 11:13:28,892+08 INFO [org.ovirt.engine.core.
> vdsbroker.vdsbroker.PrepareImageVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-55)
> [02c871da-a599-4201-9dd5-92a468dee952] START, PrepareImageVDSCommand(HostName
> = 21,
> PrepareImageVDSCommandParameters:{hostId='68f27646-da12-480b-9887-42ada2911132'}),
> log id: 19407261
> 2018-09-11 11:13:28,901+08 INFO [org.ovirt.engine.core.
> vdsbroker.vdsbroker.PrepareImageVDSCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-55)
> [02c871da-a599-4201-9dd5-92a468dee952] FINISH, PrepareImageVDSCommand,
> return: PrepareImageReturn:{status='Status [code=0, message=Done]'}, log
> id: 19407261
> 2018-09-11 11:13:28,901+08 INFO [org.ovirt.engine.core.
> vdsbroker.irsbroker.SetVolumeLegalityVDSCommand]
>
[ovirt-users] Re: Gluster deployment - Arbiter volume - different disk size - volumes sizes
You don't really need a data and vmstore. Vmstore I believe iaeamt to be the new iso domain but even it is not needed as all data domains act the same. You can use a seperate data and vmstore domain because it will give you greater flexibility in terms of backing up thr volumes so you can choose to backup just the vm data and not images On Wed, Sep 12, 2018, 5:30 AM florentl, wrote: > Hello, > I have one more question for the gluster deployment. > I have three servers with different disk sizes : > - server1 : 3 x SSD configured in raid 5 mode for a total capacity of 900 > GB > - server2 : 6 x SSD configurerd in raid 6 mode for a total capacity of > 2,2 TB > - server3 : same as server2 (2,2TB) > Because my server1 has less capacity than the others I will use it as an > arbiter volume (during the deployment I will declare it as the last host > : host3). > Is-it correct ? > > So I will create 4 volumes : > - engine : 50 GB type replicated without arbiter > - data : ?? > - vmstore : ??? > - iso : 15 GB replicated with arbiter volume > > Can someone tell me what are the differences between data and vmstore > volume ? In the earlier version there was only information about data > volume and export volume. I found nothing about vmstore volume. > > If the wmstore is, as its name suggests, the place where all vm files > will be stored including vm disks images, I think I have to set most of > the capacity for this volume. > So at the end my 4 volumes will be : > - engine : 50 GB type replicated without arbiter > - data : 500 TB replicated with arbiter volume > - vmstore : 1,5 TB replicated with arbiter volume > - iso : 15 GB replicated with arbiter volume > > What do you think of this ? > > Thanks, > > Florent > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/S6Q7D734NCFDS3CU736ZI5SM3GSWKAUC/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2M24ZTMCX6R5OQX7ZJKLNE3S46XMQKY4/
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
Yes, i use same manual to change WebUI SSL.
ovirt-ca-file= is a same SSL file which use WebUI.
Yes, i restart ovirt-provider-ovn, i restart engine, i restart all what i can
restart. Nothing...
> 12 сент. 2018 г., в 16:11, Dominik Holler написал(а):
>
> On Wed, 12 Sep 2018 14:23:54 +0300
> "Mail SET Inc. Group" wrote:
>
>> Ok!
>
> Not exactly, please use users@ovirt.org for such questions.
> Other should benefit from this questions, too.
> Please write the next mail to users@ovirt.org and keep me in CC.
>
>> What i did:
>>
>> 1) install oVirt «from box» (4.2.5.2-1.el7);
>> 2) generate own ssl for my engine using my FreeIPA CA, Install it and
>
> What means "Install it"? You can use the doc from the following link
> https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_SSL_Certificate
>
> Ensure that ovirt-ca-file= in
> /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
> points to the correct file and ovirt-provider-ovn is restarted.
>
>> get tis issue;
>>
>>
>> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log
>> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED]
>> certificate verify failed (_ssl.c:579) Traceback (most recent call
>> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py",
>> line 133, in _handle_request method, path_parts, content
>> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py",
>> line 175, in handle_request return
>> self.call_response_handler(handler, content, parameters) File
>> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
>> call_response_handler return response_handler(content, parameters)
>> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py",
>> line 62, in post_tokens user_password=user_password) File
>> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
>> create_token return auth.core.plugin.create_token(user_at_domain,
>> user_password) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
>> 48, in create_token timeout=self._timeout()) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
>> in create_token username, password, engine_url, ca_file, timeout)
>> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line
>> 91, in _get_sso_token timeout=timeout File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54,
>> in wrapper response = func(*args, **kwargs) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47,
>> in wrapper raise BadGateway(e) BadGateway: [SSL:
>> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579)
>>
>>
>> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log
>> 2018-09-12 14:10:23,773+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
>> Acquired to object
>> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
>> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
>> Running command: SyncNetworkProviderCommand internal: true.
>> 2018-09-12 14:10:23,836+03 ERROR
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
>> Command
>> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand'
>> failed: EngineException: (Failed with error Bad Gateway and code
>> 5050) 2018-09-12 14:10:23,837+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
>> freed to object
>> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
>> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO
>> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default
>> task-6) [] User admin@internal successfully logged in with scopes:
>> ovirt-app-admin ovirt-app-api ovirt-app-portal
>> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all
>> ovirt-ext=token-info:authz-search
>> ovirt-ext=token-info:public-authz-search
>> ovirt-ext=token-info:validate ovirt-ext=token:password-access
>> 2018-09-12 14:14:12,587+03 INFO
>> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default
>> task-6) [1bf1b763] Running command: CreateUserSessionCommand
>> internal: false. 2018-09-12 14:14:12,628+03 INFO
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User
>> admin@internal-authz connecting from '10.0.3.61' using session
>> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg=='
>> logged in. 2018-09-12 14:14:30,972+03 INFO
[ovirt-users] Install failing at DNS resolution check (closing up).
I am trying to set up a small oVirt 4.2 cluster on CentOS with 2 hosts to do some testing with. I got the everything set up to the point where I am running the hosted-engine --deploy, but it fails with an error saying it was unable to resolve some host name or IP address (but it isn't very clear what one). I have tested on the same machine its ability resolve the hosts in the cluster both forward and reverse and they work fine with nslookup. That includes the DNS entry for the hosted-engine. I tried putting them all into the /etc/hosts files of each computer but it still fails at the same step. Thge log file it refers to does not seem very helpful. Maybe I'm just not sure what to look for. -- Kristian Petersen System Administrator BYU Dept. of Chemistry and Biochemistry ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/TUBRQYFFLRD2M7XIAJZ5V6BDW2CTRNIG/
[ovirt-users] Re: vm with disks on multiple glusterfs domains fails if a gluster host goes down
ok I think I figured out what is happening... I am currently running some redundancy tests on ovirt+replica2+arbiter glusterfs This is happening under small file 4k fio random write test. like this fio --randrepeat=1 --ioengine=libaio --direct=1 --gtod_reduce=1 --name=test --filename=test --bs=4k --iodepth=32 --size=5G --readwrite=randwrite I have raid 6 on all 3 gluster servers with capacitor backed raid cache. But it seems that write back cache is not a good option for vm's, when a gluster node went down vm became non responsive, and never recovered.. at some point the whole virtual disk became a mess and had to be deleted. Changing RAID controller cache to write-through and ping timeout on gluster volume network.ping-timeout to 10 seconds seems to improve things.. Still large shard block sizes (128MB and above) sometimes get the vm in a paused like situation like this.. kernel:NMI watchdog: BUG: soft lockup - CPU#4 stuck for 22s! [fio:3232] Small shard block sizes while being slower handling the situation a lot better.. almost no pausing of the vm and a consistent performance. It seems here that the only "safe" option after quite a lot of testing is to have shard block size at 8mb with all disks on one volume. It seems larger shard block sizes, and multiple disks on various volume get the vm non responding and disks trashed.. This setup seems to work for me for the max reliability I can get with libgfapi.. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/ELIQK2VCLHX7J6P2N7GOIUD4M3MZVE5J/
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
Yes, i use same manual to change WebUI SSL.
ovirt-ca-file= is a same SSL file which use WebUI.
Yes, i restart ovirt-provider-ovn, i restart engine, i restart all what i can
restart. Nothing...
> 12 сент. 2018 г., в 16:11, Dominik Holler написал(а):
>
> On Wed, 12 Sep 2018 14:23:54 +0300
> "Mail SET Inc. Group" wrote:
>
>> Ok!
>
> Not exactly, please use users@ovirt.org for such questions.
> Other should benefit from this questions, too.
> Please write the next mail to users@ovirt.org and keep me in CC.
>
>> What i did:
>>
>> 1) install oVirt «from box» (4.2.5.2-1.el7);
>> 2) generate own ssl for my engine using my FreeIPA CA, Install it and
>
> What means "Install it"? You can use the doc from the following link
> https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_SSL_Certificate
>
> Ensure that ovirt-ca-file= in
> /etc/ovirt-provider-ovn/conf.d/10-setup-ovirt-provider-ovn.conf
> points to the correct file and ovirt-provider-ovn is restarted.
>
>> get tis issue;
>>
>>
>> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log
>> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED]
>> certificate verify failed (_ssl.c:579) Traceback (most recent call
>> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py",
>> line 133, in _handle_request method, path_parts, content
>> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py",
>> line 175, in handle_request return
>> self.call_response_handler(handler, content, parameters) File
>> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
>> call_response_handler return response_handler(content, parameters)
>> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py",
>> line 62, in post_tokens user_password=user_password) File
>> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
>> create_token return auth.core.plugin.create_token(user_at_domain,
>> user_password) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
>> 48, in create_token timeout=self._timeout()) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
>> in create_token username, password, engine_url, ca_file, timeout)
>> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line
>> 91, in _get_sso_token timeout=timeout File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54,
>> in wrapper response = func(*args, **kwargs) File
>> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47,
>> in wrapper raise BadGateway(e) BadGateway: [SSL:
>> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579)
>>
>>
>> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log
>> 2018-09-12 14:10:23,773+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
>> Acquired to object
>> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
>> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
>> Running command: SyncNetworkProviderCommand internal: true.
>> 2018-09-12 14:10:23,836+03 ERROR
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
>> Command
>> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand'
>> failed: EngineException: (Failed with error Bad Gateway and code
>> 5050) 2018-09-12 14:10:23,837+03 INFO
>> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
>> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
>> freed to object
>> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
>> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO
>> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default
>> task-6) [] User admin@internal successfully logged in with scopes:
>> ovirt-app-admin ovirt-app-api ovirt-app-portal
>> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all
>> ovirt-ext=token-info:authz-search
>> ovirt-ext=token-info:public-authz-search
>> ovirt-ext=token-info:validate ovirt-ext=token:password-access
>> 2018-09-12 14:14:12,587+03 INFO
>> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default
>> task-6) [1bf1b763] Running command: CreateUserSessionCommand
>> internal: false. 2018-09-12 14:14:12,628+03 INFO
>> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
>> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User
>> admin@internal-authz connecting from '10.0.3.61' using session
>> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg=='
>> logged in. 2018-09-12 14:14:30,972+03
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
On Wed, 12 Sep 2018 14:42:15 -
m...@set-pro.net wrote:
> I have a same issue with OVN provider and SSL, but certificate
> changes not helps to resolve it. I use following
> https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_SSL_Certificate
> to replace my cert, and after reboot get this error.
> ovirt-ca-file= is a same SSL file which use WebUI.
> I restart ovirt-provider-ovn, i restart engine, i restart everything
> what i can restart. Nothing helps...
>
> Logs below.
>
> [root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log
> 2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED]
> certificate verify failed (_ssl.c:579) Traceback (most recent call
> last): File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py",
> line 133, in _handle_request method, path_parts, content
> File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py",
> line 175, in handle_request return
> self.call_response_handler(handler, content, parameters) File
> "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
> call_response_handler return response_handler(content, parameters)
> File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py",
> line 62, in post_tokens user_password=user_password) File
> "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
> create_token return auth.core.plugin.create_token(user_at_domain,
> user_password) File
> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line
> 48, in create_token timeout=self._timeout()) File
> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75,
> in create_token username, password, engine_url, ca_file, timeout)
> File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line
> 91, in _get_sso_token timeout=timeout File
> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54,
> in wrapper response = func(*args, **kwargs) File
> "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47,
> in wrapper raise BadGateway(e) BadGateway: [SSL:
> CERTIFICATE_VERIFY_FAILED] certificate verify failed (_ssl.c:579)
>
>
> [root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log
> 2018-09-12 14:10:23,773+03 INFO
> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
> Acquired to object
> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
> sharedLocks=''}' 2018-09-12 14:10:23,778+03 INFO
> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
> Running command: SyncNetworkProviderCommand internal: true.
> 2018-09-12 14:10:23,836+03 ERROR
> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685]
> Command
> 'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand'
> failed: EngineException: (Failed with error Bad Gateway and code
> 5050) 2018-09-12 14:10:23,837+03 INFO
> [org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
> (EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock
> freed to object
> 'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
> sharedLocks=''}' 2018-09-12 14:14:12,477+03 INFO
> [org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default
> task-6) [] User admin@internal successfully logged in with scopes:
> ovirt-app-admin ovirt-app-api ovirt-app-portal
> ovirt-ext=auth:sequence-priority=~ ovirt-ext=revoke:revoke-all
> ovirt-ext=token-info:authz-search
> ovirt-ext=token-info:public-authz-search
> ovirt-ext=token-info:validate ovirt-ext=token:password-access
> 2018-09-12 14:14:12,587+03 INFO
> [org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default
> task-6) [1bf1b763] Running command: CreateUserSessionCommand
> internal: false. 2018-09-12 14:14:12,628+03 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (default task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User
> admin@internal-authz connecting from '10.0.3.61' using session
> 's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg=='
> logged in. 2018-09-12 14:14:30,972+03 INFO
> [org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand]
> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running
> command: ImportProviderCertificateCommand internal: false. Entities
> affected : ID: aaa0----123456789aaa Type:
> SystemAction group CREATE_STORAGE_POOL with role type ADMIN
> 2018-09-12 14:14:30,982+03 INFO
> [org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector]
> (default task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] EVENT_ID:
> PROVIDER_CERTIFICATE_IMPORTED(213), Certificate for provider
>
[ovirt-users] Re: Host restarting for unknown reasons
Can you please attach also /var/log/sanlock.log and /var/log/messages for the relevant time frame? On Wed, Sep 12, 2018 at 1:59 PM wrote: > We originally noticed an issue when the host would restart at midnight on > Saturdays EST time. The other day it restarted at 10AM EST which was a > surprise. > > The system is under low load and no hardware issues were found in iDRAC > nor in kernel messages. > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/37CJPQ6G3V54K2NB2K7U6JKEOIO6YQZ5/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/JQLB2THJIRYIXETYQCLDEE6376D4RBUS/
[ovirt-users] Re: Gluster deployment - Arbiter volume - different disk size - volumes sizes
I just use engine and data in mine On Wed, Sep 12, 2018, 1:33 AM femi adegoke wrote: > For the engine, you will need at least 58 GB. I always use 62 just to be > on the safe side. If you use 50, your install will fail. > > You don't need an ISO domain. ISO files can be stored in "data" or > "vmstore". > > Each vm you create should have 2 disks, 1 for the o/s & 1 for the data. > The o/s disk goes in "vmstore", the data disk goes in "data". > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/XQ4AWPVS5GG263TFPLK67MHNBWRSSHI6/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/GUQZG2RNOL435GBCEV27W2MEXNERDPTR/
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
I found what happens with OVN. The wrong contents of a /etc/pki/ovirt-engine/apache-ca.pem I update it with my root-CA cert file and get a success test: "Test succeeded, managed to access provider." Thank's to all reply! ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/RLEGI6FRFXIJWJXWBDK6OFWBU35ZTPCR/
[ovirt-users] Re: Install failing at DNS resolution check (closing up).
Hi, you have detailed logs under /var/log/ovirt-hosted-engine-setup, can you please share that ones? On Wed, Sep 12, 2018 at 6:13 PM Kristian Petersen wrote: > I am trying to set up a small oVirt 4.2 cluster on CentOS with 2 hosts to > do some testing with. I got the everything set up to the point where I am > running the hosted-engine --deploy, but it fails with an error saying it > was unable to resolve some host name or IP address (but it isn't very clear > what one). I have tested on the same machine its ability resolve the hosts > in the cluster both forward and reverse and they work fine with nslookup. > That includes the DNS entry for the hosted-engine. I tried putting them > all into the /etc/hosts files of each computer but it still fails at the > same step. Thge log file it refers to does not seem very helpful. Maybe > I'm just not sure what to look for. > > -- > Kristian Petersen > System Administrator > BYU Dept. of Chemistry and Biochemistry > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/TUBRQYFFLRD2M7XIAJZ5V6BDW2CTRNIG/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/4KSUNHXOUXTBVD4H7HAKLGGWKYBXBZET/
[ovirt-users] Re: oVirt + gluster with JBOD
JBOD is on the drop down when you do the setup for the volumes On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral wrote: > Hi! > > I am thinking about using some spare servers I have for a > hyperconverged oVirt + gluster. Only problem with these servers is that > the RAID card is not specially good, so I am considering using gluster > in a JBOD configuration. JBOD is supported for recent versions of > gluster, but I am not sure if this configuration is supported by oVirt, > or if there are any special considerations I should take into account. > > Anyone running oVirt + gluster with JBOD who can comment on this? > > Thanks! > > -- > > Eduardo Mayoral. > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/
[ovirt-users] Re: migrate ovirt-engine to Self-hosted Engine
On Wed, Sep 12, 2018 at 3:46 PM Edoardo Mazza wrote: > Hi all, > my enviroment is composed to a standalone ovirt-engine and 3 host. > I would migrate my ovirt-engine to a self-hosted Engine enviroment, but I > don't found any guide for this procedure. > We have this: https://www.ovirt.org/develop/developer-guide/engine/migrate-to-hosted-engine/ it's still valid but please execute hosted-engine-setup with the vintage flow (adding --noansible) for this. > Con you help me? > Thank > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/BDWZQNZ22ERCHMCTR4XZKEMA7OKUH37L/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/R4TBPKEZILMM2BZ7EWQQ4HMCG27C22OF/
[ovirt-users] Question on gluster sharding maturity/stability
I'm currently running oVirt 4.1 (with gluster 3.8.15) and as this is a cluster which has been upgraded from (I believe) oVirt 3.5 originally, the storage volumes use old "Optimize for Virt Store" configuration of not enabling sharding. I see now that the oVirt 4.1 "optimize" configuration does enable sharding, but I am a bit wary after seeing some horror stories from about a year ago about corruptions and data loss caused by sharding in earlier gluster versions. Is the gluster associated with oVirt 4.1 now at a stable point that I can and should trust sharding? I plan on doing some simple experimenting first, but I see a great benefit to balancing distributed-replicated volumes and for healing times and I would like to take advantage of these benefits now. Since the ovirt engine is now 'recommending' the use of sharding for disk store volumes, this leads me to believe that it is trusted by the oVirt crew. Does this seem accurate? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XZEVEJ5VOY5R3QNCEPILHHGZOXNN/
[ovirt-users] Re: oVirt + gluster with JBOD
Should also note that I am using replica 3 configuration with no arbiter for extra redundancy. On Wed, Sep 12, 2018 at 3:53 PM Jayme wrote: > I am running a three server oVirt hyperconverged setup with JBOD disks. > Two 2TB SSDs in JBOD per server. The configuration is working very well > for me so far. > > > > On Wed, Sep 12, 2018 at 2:36 PM Donny Davis wrote: > >> JBOD is on the drop down when you do the setup for the volumes >> >> On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral wrote: >> >>> Hi! >>> >>> I am thinking about using some spare servers I have for a >>> hyperconverged oVirt + gluster. Only problem with these servers is that >>> the RAID card is not specially good, so I am considering using gluster >>> in a JBOD configuration. JBOD is supported for recent versions of >>> gluster, but I am not sure if this configuration is supported by oVirt, >>> or if there are any special considerations I should take into account. >>> >>> Anyone running oVirt + gluster with JBOD who can comment on this? >>> >>> Thanks! >>> >>> -- >>> >>> Eduardo Mayoral. >>> >>> ___ >>> Users mailing list -- users@ovirt.org >>> To unsubscribe send an email to users-le...@ovirt.org >>> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >>> oVirt Code of Conduct: >>> https://www.ovirt.org/community/about/community-guidelines/ >>> List Archives: >>> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/ >>> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/ >> > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5LAVPJGOFIITR67XAGVGCOPCVJWDCXVY/
[ovirt-users] Re: oVirt + gluster with JBOD
I am running a three server oVirt hyperconverged setup with JBOD disks. Two 2TB SSDs in JBOD per server. The configuration is working very well for me so far. On Wed, Sep 12, 2018 at 2:36 PM Donny Davis wrote: > JBOD is on the drop down when you do the setup for the volumes > > On Wed, Sep 12, 2018, 1:50 AM Eduardo Mayoral wrote: > >> Hi! >> >> I am thinking about using some spare servers I have for a >> hyperconverged oVirt + gluster. Only problem with these servers is that >> the RAID card is not specially good, so I am considering using gluster >> in a JBOD configuration. JBOD is supported for recent versions of >> gluster, but I am not sure if this configuration is supported by oVirt, >> or if there are any special considerations I should take into account. >> >> Anyone running oVirt + gluster with JBOD who can comment on this? >> >> Thanks! >> >> -- >> >> Eduardo Mayoral. >> >> ___ >> Users mailing list -- users@ovirt.org >> To unsubscribe send an email to users-le...@ovirt.org >> Privacy Statement: https://www.ovirt.org/site/privacy-policy/ >> oVirt Code of Conduct: >> https://www.ovirt.org/community/about/community-guidelines/ >> List Archives: >> https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/ >> > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: > https://www.ovirt.org/community/about/community-guidelines/ > List Archives: > https://lists.ovirt.org/archives/list/users@ovirt.org/message/YGQUVKGP3S34JRB4CPWIRXZ2YDR27NFQ/ > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KXKP5VHSJUR4ZOBIAPX6ICMP36BPT27E/
[ovirt-users] Re: Error installing ovirt node
I got the same error!! I installed the engine of version 4.2.6 use yum,and installed node use the official release iso iamge. when i add host to cluster,it alert install failed!!!, the engine.log puts the same error as above. btw,my node can't access the internet. how can i resolve it? ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/KLJ72S6ATR3GCND42T5KK3LT2ME5K3RY/
[ovirt-users] Re: Host restarting for unknown reasons
This is a stupid question, but how do I attach a file to this post? I am using the web form, as soon as I figure out this mailing list thing I will attach full logs (NB) Regardless, there are no logs before the reboot of Node1 in sanlock.log on that day. Node1 started coming back online at 10:04AM. 2018-09-08 09:19:38 3081 [1127]: s1 host 2 16 249 f9704a0b-9a09-42f4-819c-35055c1177af.node2. 2018-09-10 10:03:54 5 [1154]: sanlock daemon started 3.6.0 host edfe4d27-bdbe-45e3-9e4c-a4e02b2101bd.node1. Messages has more information, and when I figure out how to attach files I will post it. Here are the entries around the reboot time. The node rebooted between 09:58:52 and 10:00:01 Sep 10 09:58:52 node1 libvirtd: 2018-09-10 13:58:52.405+: 2513: error : qemuDomainAgentAvailable:6946 : Guest agent is not responding: QEMU guest agent is not connected Sep 10 09:58:52 node1 libvirtd: 2018-09-10 13:58:52.405+: 2514: error : qemuDomainAgentAvailable:6946 : Guest agent is not responding: QEMU guest agent is not connected Sep 10 10:00:01 node1 systemd: Started Session 353 of user root. Sep 10 10:00:01 node1 systemd: Starting Session 353 of user root. Sep 10 10:03:51 node1 kernel: microcode: microcode updated early to revision 0x42d, date = 2018-04-25 Sep 10 10:03:51 node1 kernel: Initializing cgroup subsys cpuset Sep 10 10:03:51 node1 kernel: Initializing cgroup subsys cpu Sep 10 10:03:51 node1 kernel: Initializing cgroup subsys cpuacct Sep 10 10:03:51 node1 kernel: Linux version 3.10.0-862.11.6.el7.x86_64 (buil...@kbuilder.dev.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-28) (GCC) ) #1 SMP Tue Aug 14 21:49:04 UTC 2018 Sep 10 10:03:51 node1 kernel: Command line: BOOT_IMAGE=/vmlinuz-3.10.0-862.11.6.el7.x86_64 root=/dev/mapper/centos-root ro crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet LANG=en_US.UTF-8 Sep 10 10:03:51 node1 kernel: e820: BIOS-provided physical RAM map: ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/I7I26QE6OC4QMHEKUJUFG3KFH7XUTN6X/
[ovirt-users] Re: Install oVirt node without Internet repository
I use the official release ovirt node iso intalled,but also can't add host to engine. errors： Yum can't queue package dmidecode：cannot retrieve metalink for repository ovirt-4.2-epel/x86_64 please verify its path and try again ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/5ANRAJEB4CM73XZH6WEUOUE5THDZECWY/
[ovirt-users] Re: Best way to update dns config of ovirt node
On Mon, Sep 10, 2018 at 5:53 PM, Gianluca Cecchi wrote: > Hello, > supposing to have ovirt-ng node 4.2.6 and that ovirtmgmt config regarding > DNS servers has to be updated, what is the correct way to proceed? > DNS should be editable from the network attachment window. They are applied only for the network which "owns" the default-route for that host. The values are added through ifcfg, therefore its logic of adding it to resolv.conf is used. > Thanks, > Gianluca > > ___ > Users mailing list -- users@ovirt.org > To unsubscribe send an email to users-le...@ovirt.org > Privacy Statement: https://www.ovirt.org/site/privacy-policy/ > oVirt Code of Conduct: https://www.ovirt.org/community/about/community- > guidelines/ > List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/ > message/KAYTA6Y34ONCP3YVXL6ST6NZY7WE32CW/ > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/PZQYHNJCEO5BSQPQL2OY7QRVGWND25X4/
[ovirt-users] Re: Gluster deployment - Arbiter volume - different disk size - volumes sizes
For the engine, you will need at least 58 GB. I always use 62 just to be on the safe side. If you use 50, your install will fail. You don't need an ISO domain. ISO files can be stored in "data" or "vmstore". Each vm you create should have 2 disks, 1 for the o/s & 1 for the data. The o/s disk goes in "vmstore", the data disk goes in "data". ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/XQ4AWPVS5GG263TFPLK67MHNBWRSSHI6/
[ovirt-users] oVirt + gluster with JBOD
Hi! I am thinking about using some spare servers I have for a hyperconverged oVirt + gluster. Only problem with these servers is that the RAID card is not specially good, so I am considering using gluster in a JBOD configuration. JBOD is supported for recent versions of gluster, but I am not sure if this configuration is supported by oVirt, or if there are any special considerations I should take into account. Anyone running oVirt + gluster with JBOD who can comment on this? Thanks! -- Eduardo Mayoral. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/2DTIGZ5VOKG52ZHCZTTCHGPT5NFKYSTP/
[ovirt-users] Guest OS Windows 2016 Server (standard and/or datacenter edition)
Hi, is there a road map for os guest windows server 2016? Regards ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/WY4CFMBVADU6NXUNCQCHNQMXVLCRXSST/
[ovirt-users] Re: Guest OS Windows 2016 Server (standard and/or datacenter edition)
I had no problems installing a vm with Windows Server 2016 or 2019. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QITZGXZ2IYVW7T2XOXSLT75UWYZXFC56/
[ovirt-users] Re: Host restarting for unknown reasons
We originally noticed an issue when the host would restart at midnight on Saturdays EST time. The other day it restarted at 10AM EST which was a surprise. The system is under low load and no hardware issues were found in iDRAC nor in kernel messages. ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/37CJPQ6G3V54K2NB2K7U6JKEOIO6YQZ5/
[ovirt-users] Re: Info about procedure to shutdown hosted engine VM
On Wed, Sep 12, 2018 at 10:03 AM Simone Tiraboschi
wrote:
>
>
>> Does it mean that I have to run the ansible-playbook command from an
>> external server and use as host in inventory the engine server, or does it
>> mean that the ansible-playbook command is to be run from within the server
>> where the ovirt-engine service is running and so keep intact the lines
>> inside the smple yal file:
>> "
>> - name: oVirt shutdown environment
>> hosts: localhost
>> connection: local
>> "
>>
>>
> Both options are valid.
>
Good! It seems it worked ok in shutdown mode (the default one) in a test
hosted engine based 4.2.6 environment, where I have 2 hosts (both are
hosted engine hosts), the hosted engine VM + 3 VMs
Initially ovnode2 is both SPM and hosts the HostedEngine VM
If I run the playbook from inside ovmgr42:
[root@ovmgr42 tests]# ansible-playbook test.yml
[WARNING]: provided hosts list is empty, only localhost is available. Note
that the implicit
localhost does not match 'all'
PLAY [oVirt shutdown environment]
**
TASK [oVirt.shutdown-env : Populate service facts]
*
ok: [localhost]
TASK [oVirt.shutdown-env : Enforce ovirt-engine machine]
***
skipping: [localhost]
TASK [oVirt.shutdown-env : Enforce ovirt-engine status]
skipping: [localhost]
TASK [oVirt.shutdown-env : Login to oVirt]
*
ok: [localhost]
TASK [oVirt.shutdown-env : Get hosts]
**
ok: [localhost]
TASK [oVirt.shutdown-env : set_fact]
***ok:
[localhost]
TASK [oVirt.shutdown-env : Enforce global maintenance mode]
skipping: [localhost]
TASK [oVirt.shutdown-env : Warn about HE global maintenace mode]
***
ok: [localhost] => {
"msg": "HE global maintenance mode has been set; you have to exit it to
get the engine VM started when needed\n"
}
TASK [oVirt.shutdown-env : Shutdown of HE hosts]
***
changed: [localhost] => (item= . . . u'name': u'ovnode1', . . . u'spm':
{u'priority': 5, u'status': u'none'}})
changed: [localhost] => (item= . . . u'name': u'ovnode2', . . . u'spm':
{u'priority': 5, u'status': u'spm'}})
TASK [oVirt.shutdown-env : Shutdown engine host/VM]
Connection to ovmgr42 closed by remote host.
Connection to ovmgr42 closed.
[g.cecchi@ope46 ~]$
At the end the 2 hosts (HP blades) are in power off state, as expected.
ILO event log of ovnode1:
Last Update Initial Update Count Description
09/12/2018 10:13 09/12/2018 10:13 1 Server power removed.
ILO event log of ovnode2:
Last Update Initial Update Count Description
09/12/2018 10:14 09/12/2018 10:14 1 Server power removed.
Actually due to time settings, they are to be intended as 11:13 and 11:14
my local time
In /var/log/libvirt/qemu/HostedEngine.log of node ovnode2
2018-09-11 17:04:16.388+: starting up libvirt version: 3.9.0, . . .
hostname: ovnode2
...
2018-09-12 09:11:29.641+: shutting down, reason=shutdown
Actually we are at 11:11 local time
For now I have then manually restarted all the env
I began starting from ovnode2 (that was SPM and with HostedEngine during
shutdown), keeping ovnode1 powered off, and it took some time because I
got some messages like this (to be read bottom up)
Host ovnode1 failed to recover. 9/12/18 2:30:21 PM
Host ovnode1 is non responsive. 9/12/18 2:30:21 PM
...
Host ovnode1 is not responding. It will stay in Connecting state for a
grace period of 60 seconds and after that an attempt to fence the host will
be issued. 9/12/18 2:27:40 PM
Failed to Reconstruct Master Domain for Data Center MYDC42. 9/12/18 2:27:34
PM
VDSM ovnode2 command ConnectStoragePoolVDS failed: Cannot find master
domain: u'spUUID=5af30d59-004c-02f2-01c9-00b8,
sdUUID=cbc308db-5468-4e6d-aabb-f9d133d05de2' 9/12/18 2:27:33 PM
Invalid status on Data Center MYDC42. Setting status to Non Responsive.
9/12/18 2:27:27 PM
...
ETL Service Started 9/12/18 2:26:27 PM
With ovnode1 still powered off, if I try to start it from the gui I get:
Trying to power on ovnode1 I get in events:
Host ovnode1 became non responsive. Fence operation skipped as the system
is still initializing and this is not a host where hosted engine was
running on previously. 9/12/18 2:30:21 PM
and as popup I get this "operation canceled" window:
https://drive.google.com/file/d/1IWXASJHRylZR6ePWtGUcKiLbYjg__eNS/view?usp=sharing
What's the meaning?
In the phrase "the system is still initializing and this is not a host
where hosted engine was running" the term THIS to which host is referred?
After some minutes I automatically get (to be read
[ovirt-users] Re: Info about procedure to shutdown hosted engine VM
On Wed, Sep 12, 2018 at 3:49 PM Gianluca Cecchi
wrote:
> On Wed, Sep 12, 2018 at 10:03 AM Simone Tiraboschi
> wrote:
>
>>
>>
>>> Does it mean that I have to run the ansible-playbook command from an
>>> external server and use as host in inventory the engine server, or does it
>>> mean that the ansible-playbook command is to be run from within the server
>>> where the ovirt-engine service is running and so keep intact the lines
>>> inside the smple yal file:
>>> "
>>> - name: oVirt shutdown environment
>>> hosts: localhost
>>> connection: local
>>> "
>>>
>>>
>> Both options are valid.
>>
>
> Good! It seems it worked ok in shutdown mode (the default one) in a test
> hosted engine based 4.2.6 environment, where I have 2 hosts (both are
> hosted engine hosts), the hosted engine VM + 3 VMs
> Initially ovnode2 is both SPM and hosts the HostedEngine VM
> If I run the playbook from inside ovmgr42:
>
> [root@ovmgr42 tests]# ansible-playbook test.yml
> [WARNING]: provided hosts list is empty, only localhost is available.
> Note that the implicit
> localhost does not match 'all'
>
> PLAY [oVirt shutdown environment]
> **
>
> TASK [oVirt.shutdown-env : Populate service facts]
> *
> ok: [localhost]
>
> TASK [oVirt.shutdown-env : Enforce ovirt-engine machine]
> ***
> skipping: [localhost]
>
> TASK [oVirt.shutdown-env : Enforce ovirt-engine status]
>
> skipping: [localhost]
>
> TASK [oVirt.shutdown-env : Login to oVirt]
> *
> ok: [localhost]
>
> TASK [oVirt.shutdown-env : Get hosts]
> **
> ok: [localhost]
>
> TASK [oVirt.shutdown-env : set_fact]
> ***ok:
> [localhost]
>
> TASK [oVirt.shutdown-env : Enforce global maintenance mode]
>
> skipping: [localhost]
>
> TASK [oVirt.shutdown-env : Warn about HE global maintenace mode]
> ***
> ok: [localhost] => {
> "msg": "HE global maintenance mode has been set; you have to exit it
> to get the engine VM started when needed\n"
> }
>
> TASK [oVirt.shutdown-env : Shutdown of HE hosts]
> ***
> changed: [localhost] => (item= . . . u'name': u'ovnode1', . . . u'spm':
> {u'priority': 5, u'status': u'none'}})
> changed: [localhost] => (item= . . . u'name': u'ovnode2', . . . u'spm':
> {u'priority': 5, u'status': u'spm'}})
>
>
> TASK [oVirt.shutdown-env : Shutdown engine host/VM]
>
> Connection to ovmgr42 closed by remote host.
> Connection to ovmgr42 closed.
> [g.cecchi@ope46 ~]$
>
> At the end the 2 hosts (HP blades) are in power off state, as expected.
>
> ILO event log of ovnode1:
> Last Update Initial Update Count Description
> 09/12/2018 10:13 09/12/2018 10:13 1 Server power removed.
>
> ILO event log of ovnode2:
> Last Update Initial Update Count Description
> 09/12/2018 10:14 09/12/2018 10:14 1 Server power removed.
>
> Actually due to time settings, they are to be intended as 11:13 and 11:14
> my local time
>
> In /var/log/libvirt/qemu/HostedEngine.log of node ovnode2
>
> 2018-09-11 17:04:16.388+: starting up libvirt version: 3.9.0, . . .
> hostname: ovnode2
> ...
> 2018-09-12 09:11:29.641+: shutting down, reason=shutdown
>
> Actually we are at 11:11 local time
>
> For now I have then manually restarted all the env
> I began starting from ovnode2 (that was SPM and with HostedEngine during
> shutdown), keeping ovnode1 powered off, and it took some time because I
> got some messages like this (to be read bottom up)
>
> Host ovnode1 failed to recover. 9/12/18 2:30:21 PM
> Host ovnode1 is non responsive. 9/12/18 2:30:21 PM
> ...
> Host ovnode1 is not responding. It will stay in Connecting state for a
> grace period of 60 seconds and after that an attempt to fence the host will
> be issued. 9/12/18 2:27:40 PM
> Failed to Reconstruct Master Domain for Data Center MYDC42. 9/12/18
> 2:27:34 PM
> VDSM ovnode2 command ConnectStoragePoolVDS failed: Cannot find master
> domain: u'spUUID=5af30d59-004c-02f2-01c9-00b8,
> sdUUID=cbc308db-5468-4e6d-aabb-f9d133d05de2' 9/12/18 2:27:33 PM
> Invalid status on Data Center MYDC42. Setting status to Non Responsive.
> 9/12/18 2:27:27 PM
> ...
> ETL Service Started 9/12/18 2:26:27 PM
>
> With ovnode1 still powered off, if I try to start it from the gui I get:
>
> Trying to power on ovnode1 I get in events:
> Host ovnode1 became non responsive. Fence operation skipped as the system
> is still initializing and this is not a host where hosted engine was
> running on previously. 9/12/18 2:30:21 PM
>
> and as popup I get this "operation canceled" window:
>
>
[ovirt-users] Re: Failed to synchronize networks of Provider ovirt-provider-ovn
I have a same issue with OVN provider and SSL, but certificate changes not
helps to resolve it.
I use following
https://access.redhat.com/documentation/en-us/red_hat_virtualization/4.2/html/administration_guide/appe-red_hat_enterprise_virtualization_and_ssl#Replacing_the_Manager_SSL_Certificate
to replace my cert, and after reboot get this error.
ovirt-ca-file= is a same SSL file which use WebUI.
I restart ovirt-provider-ovn, i restart engine, i restart everything what i can
restart. Nothing helps...
Logs below.
[root@engine ~]# tail -n 50 /var/log/ovirt-provider-ovn.log
2018-09-12 14:10:23,828 root [SSL: CERTIFICATE_VERIFY_FAILED] certificate
verify failed (_ssl.c:579)
Traceback (most recent call last):
File "/usr/share/ovirt-provider-ovn/handlers/base_handler.py", line 133, in
_handle_request
method, path_parts, content
File "/usr/share/ovirt-provider-ovn/handlers/selecting_handler.py", line 175,
in handle_request
return self.call_response_handler(handler, content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone.py", line 33, in
call_response_handler
return response_handler(content, parameters)
File "/usr/share/ovirt-provider-ovn/handlers/keystone_responses.py", line 62,
in post_tokens
user_password=user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugin_facade.py", line 26, in
create_token
return auth.core.plugin.create_token(user_at_domain, user_password)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/plugin.py", line 48,
in create_token
timeout=self._timeout())
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 75, in
create_token
username, password, engine_url, ca_file, timeout)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 91, in
_get_sso_token
timeout=timeout
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 54, in
wrapper
response = func(*args, **kwargs)
File "/usr/share/ovirt-provider-ovn/auth/plugins/ovirt/sso.py", line 47, in
wrapper
raise BadGateway(e)
BadGateway: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed
(_ssl.c:579)
[root@engine ~]# tail -n 20 /var/log/ovirt-engine/engine.log
2018-09-12 14:10:23,773+03 INFO
[org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock Acquired to
object
'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
sharedLocks=''}'
2018-09-12 14:10:23,778+03 INFO
[org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Running command:
SyncNetworkProviderCommand internal: true.
2018-09-12 14:10:23,836+03 ERROR
[org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Command
'org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand' failed:
EngineException: (Failed with error Bad Gateway and code 5050)
2018-09-12 14:10:23,837+03 INFO
[org.ovirt.engine.core.bll.provider.network.SyncNetworkProviderCommand]
(EE-ManagedThreadFactory-engineScheduled-Thread-47) [316db685] Lock freed to
object
'EngineLock:{exclusiveLocks='[14e4fb72-9764-4757-b37d-4d487995571a=PROVIDER]',
sharedLocks=''}'
2018-09-12 14:14:12,477+03 INFO
[org.ovirt.engine.core.sso.utils.AuthenticationUtils] (default task-6) [] User
admin@internal successfully logged in with scopes: ovirt-app-admin
ovirt-app-api ovirt-app-portal ovirt-ext=auth:sequence-priority=~
ovirt-ext=revoke:revoke-all ovirt-ext=token-info:authz-search
ovirt-ext=token-info:public-authz-search ovirt-ext=token-info:validate
ovirt-ext=token:password-access
2018-09-12 14:14:12,587+03 INFO
[org.ovirt.engine.core.bll.aaa.CreateUserSessionCommand] (default task-6)
[1bf1b763] Running command: CreateUserSessionCommand internal: false.
2018-09-12 14:14:12,628+03 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default
task-6) [1bf1b763] EVENT_ID: USER_VDC_LOGIN(30), User admin@internal-authz
connecting from '10.0.3.61' using session
's8jAm7BUJGlicthm6yZBA3CUM8QpRdtwFaK3M/IppfhB3fHFB9gmNf0cAlbl1xIhcJ2WX+ww7e71Ri+MxJSsIg=='
logged in.
2018-09-12 14:14:30,972+03 INFO
[org.ovirt.engine.core.bll.provider.ImportProviderCertificateCommand] (default
task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] Running command:
ImportProviderCertificateCommand internal: false. Entities affected : ID:
aaa0----123456789aaa Type: SystemAction group
CREATE_STORAGE_POOL with role type ADMIN
2018-09-12 14:14:30,982+03 INFO
[org.ovirt.engine.core.dal.dbbroker.auditloghandling.AuditLogDirector] (default
task-6) [ee3cc8a7-4485-4fdf-a0c2-e9d67b5cfcd3] EVENT_ID:
PROVIDER_CERTIFICATE_IMPORTED(213), Certificate for provider ovirt-provider-ovn
was imported. (User: admin@internal-authz)
2018-09-12 14:14:31,006+03 INFO
[ovirt-users] migrate ovirt-engine to Self-hosted Engine
Hi all, my enviroment is composed to a standalone ovirt-engine and 3 host. I would migrate my ovirt-engine to a self-hosted Engine enviroment, but I don't found any guide for this procedure. Con you help me? Thank ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/BDWZQNZ22ERCHMCTR4XZKEMA7OKUH37L/
[ovirt-users] Re: icons for custom defined OS
Am 2018-09-11 um 16:54 schrieb Matthias Leopold: Hi, I defined additional operating systems in my oVirt 4.2.6 installation according to https://www.ovirt.org/develop/release-management/features/virt/os-info/. Now i want to have custom default icons for use in VM portal for these new OS definitions. How can i do this? I only found a way to change the icon as individual VM portal user, this is nice, but not exactly what i want. I found it myself, creating appropriate icons in /usr/share/ovirt-engine/icons was sufficient, before that i thought I would have to fiddle with the vm_icon* tables matthias ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/Y3UKRQGPR2N7QNVUYUWAEOCZNGEM22GP/
[ovirt-users] Admin Portal
The redirection URI for client is not registered How to add a new host where i can use the adminportal. I found this. > Create a new conf file /etc/ovirt-engine/engine.conf.d/99-sso.conf and add: > SSO_CALLBACK_PREFIX_CHECK=false > > then > systemctl restart ovirt-engine > > This will turn off the additional security check for the callback prefix. But i want to keep the security and learn howto do it correct. Thanks ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/N2NQBMUMIEQLAGQBFAJ42HODLRF3BUFP/
[ovirt-users] Re: Info about procedure to shutdown hosted engine VM
On Tue, Sep 11, 2018 at 5:28 PM Gianluca Cecchi wrote: > On Sun, Sep 9, 2018 at 10:15 AM Simone Tiraboschi > wrote: > >> Now we have a specific ansible role for that: >> https://github.com/oVirt/ovirt-ansible-shutdown-env >> >> > Nice to see this Simone, thanks. > I'm reading the info to try on an hosted engine setup and find this: > " > This role has be designed to be run only against the machine > where ovirt-engine is running. > " > Does it mean that I have to run the ansible-playbook command from an > external server and use as host in inventory the engine server, or does it > mean that the ansible-playbook command is to be run from within the server > where the ovirt-engine service is running and so keep intact the lines > inside the smple yal file: > " > - name: oVirt shutdown environment > hosts: localhost > connection: local > " > > Both options are valid. > Thanks, > Gianluca > > ___ Users mailing list -- users@ovirt.org To unsubscribe send an email to users-le...@ovirt.org Privacy Statement: https://www.ovirt.org/site/privacy-policy/ oVirt Code of Conduct: https://www.ovirt.org/community/about/community-guidelines/ List Archives: https://lists.ovirt.org/archives/list/users@ovirt.org/message/QMMELKKNQWLKHWIVJWKLEZNZHWMXHZPY/
