Re: [SOGo] Can't do a working install

[Jonathan Mathews]

Hi Slávek

I have tried Openchange Zentyal fork and am getting the following error:

Linking bin/openchangeclient
libocpf.so.2.3: undefined reference to `yyunput'
collect2: error: ld returned 1 exit status
Makefile:1198: recipe for target 'bin/openchangeclient' failed
make: *** [bin/openchangeclient] Error 1

I presume that there is something missing from the source code.

Sincerely,
Jonathan

On Mon, Sep 12, 2016 at 6:39 PM, Slávek Banko <users@sogo.nu> wrote:

> Dne po 12. září 2016 Jonathan Mathews napsal(a):
> > Hi All
> >
> > I have been trying to install SOGo with OpenChange for the past couple
> > of months now and have not been successful.
> >
> > I have tried a few different installation guides, but none of them have
> > helped.
> >
> > I have managed to get further this time, but every time I start apache
> > I keep getting the following error:
> >
> > Job for apache2.service failed because the control process exited with
> > error code.
> >
> > I have attached a document with all the commands that I have used to
> > setup the server., if someone could look through it and advise where I
> > went wrong or if  I am missing a few steps.
> >
> > I am still learning and would appreciate any advice you could give me.
> >
> > Sincerely,
> > Jonathan
>
> I see there one possible complication: You're manually building OpenChange
> from the original OpenChange source, instead of Zentyal fork - see
> https://github.com/zentyal/openchange
>
> At the same time I do not understand that you have installed openchange
> packages using apt-get, but then you built OpenChange from source?
>
> Note: If apache2 service crashes, I suppose that to error.log could dump
> some useful information. Please look for them to let us know?
>
> Cheers
> --
> Slávek
> --
> users@sogo.nu
> https://inverse.ca/sogo/lists
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] Can't do a working install

[Jonathan Mathews]

Hi All

I have been trying to install SOGo with OpenChange for the past couple of
months now and have not been successful.

I have tried a few different installation guides, but none of them have
helped.

I have managed to get further this time, but every time I start apache I
keep getting the following error:

Job for apache2.service failed because the control process exited with
error code.

I have attached a document with all the commands that I have used to setup
the server., if someone could look through it and advise where I went wrong
or if  I am missing a few steps.

I am still learning and would appreciate any advice you could give me.

Sincerely,
Jonathan
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

SOGo Installation steps.docx
Description: MS-Word 2007 document

Re: [SOGo] ANN: SOGo v3.1 released!

[Jonathan Mathews]

Hi Ludovic

Does this mean that downloading and installing SAMBA4 and OpenChange will
work correctly?

Thanks
Jonathan
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] SOGo - Openchange issue

[Jonathan Mathews]

Hi Ludovic

Will OpenChange also be updated?

Thanks
Jonathan

On 05 May 2016 7:36 PM, "Ludovic Marcotte" <users@sogo.nu> wrote:
>
> On 2016-05-05 13:29, Jonathan Mathews (jm3185...@gmail.com) wrote:
>>
>> In your opinion, what would be the best way to SOGo to connect to
Outlook 2010,  I need to make sure that the calendar is able to sync.
>
> We will soon update the Samba packages - 2-3 weeks time frame.
>
> More news to come regarding this real soon.
>
> Thanks,
>
> --
> Ludovic Marcotte
> lmarco...@inverse.ca  ::  +1.514.755.3630  ::  http://inverse.ca
> Inverse inc. :: Leaders behind SOGo (http://sogo.nu) and PacketFence (
http://packetfence.org)
>
> --
> users@sogo.nu
> https://inverse.ca/sogo/lists
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

Re: [SOGo] SOGo - Openchange issue

[Jonathan Mathews]

Hi Rowland

Thank you for the information, it explains a lot.

In your opinion, what would be the best way to SOGo to connect to Outlook
2010,  I need to make sure that the calendar is able to sync.

Thanks
Jonathan

On 05 May 2016 6:59 PM, "Rowland Penny" <users@sogo.nu> wrote:
>
> On 05/05/16 16:42, Jonathan Mathews (jm3185...@gmail.com) wrote:
>>
>> Hi
>>
>> Hope someone could assist me.
>>
>> I am interested in using SOGo as my email server, but have been
experiencing some issues.
>>
>> I have been trying to install SOGo with OpenChange, as some of the users
prefer to use Outlook 2010.
>>
>> So I have a CentOS 6.7 server, with epel repo and rpmforge, and have
been following the installation guide on the website, and also the
following guide which is for Ubuntu
>>
>>
https://github.com/DigitalOcean-User-Projects/Articles-and-Tutorials/blob/master/sogo_an_MS_exchange_alt.md
>>
>> So, when I do yum install samba4, it only installs two packages, samba4
and samba4-common, so when you run samba-tool, you get a command not found.
I eventually found out that you have to purchase it from sernet, which
gives you all the dependencies to run samba-tool.
>>
>> I then added the SOGo repo and ran yum install sogo*, the install went
perfect. Then the next step is to install OpenChange, I used the following
instructions:
>>
>> http://www.openchange.org/download/el.html
>>
>> So when I ran yum install openchange sogo-openchange-backend
openchange-ocsmanager openchange-rpcproxy
>>
>> I get openchange-ocsmanager openchange-rpcproxy packages does not exist.
>>
>> I am not sure if I am doing something wrong, but I followed the
instructions. To me it looks like it is a repo issue, yet I have given the
exact repo that the webstie points me to.
>>
>> I would apriceate any advice anyone can give me.
>>
>>
>>
>
> For various reasons, Openchange development seems to have stalled and
Openchange will only work with Samba version 4.1.18 at latest. This version
of Samba is now EOL and is possibly subject to MITM attacks, so I wouldn't
use it. If I remember correctly, there was also a problem building
ocsmanager on later versions.
>
> All in all, I think, for the time being anyway, you should not consider
using Openchange.
>
> Rowland
>
> --
> users@sogo.nu
> https://inverse.ca/sogo/lists
-- 
users@sogo.nu
https://inverse.ca/sogo/lists

[SOGo] SOGo - Openchange issue

[Jonathan Mathews]

Hi

Hope someone could assist me.

I am interested in using SOGo as my email server, but have been
experiencing some issues.

I have been trying to install SOGo with OpenChange, as some of the users
prefer to use Outlook 2010.

So I have a CentOS 6.7 server, with epel repo and rpmforge, and have been
following the installation guide on the website, and also the following
guide which is for Ubuntu

https://github.com/DigitalOcean-User-Projects/Articles-and-Tutorials/blob/master/sogo_an_MS_exchange_alt.md

So, when I do yum install samba4, it only installs two packages, samba4 and
samba4-common, so when you run samba-tool, you get a command not found. I
eventually found out that you have to purchase it from sernet, which gives
you all the dependencies to run samba-tool.

I then added the SOGo repo and ran yum install sogo*, the install went
perfect. Then the next step is to install OpenChange, I used the following
instructions:

http://www.openchange.org/download/el.html

So when I ran yum install openchange sogo-openchange-backend
openchange-ocsmanager openchange-rpcproxy

I get openchange-ocsmanager openchange-rpcproxy packages does not exist.

I am not sure if I am doing something wrong, but I followed the
instructions. To me it looks like it is a repo issue, yet I have given the
exact repo that the webstie points me to.

I would apriceate any advice anyone can give me.

Many thanks
Jonathan


Virus-free.
www.avast.com

<#DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
-- 
users@sogo.nu
https://inverse.ca/sogo/lists