On date Wednesday 2007-11-07 12:16:34 +0100, Stefano Sabatini wrote:
> On date Wednesday 2007-11-07 12:00:49 +0100, Stefano Sabatini wrote:
> > On date Wednesday 2007-11-07 11:06:47 +0100, Stefano Sabatini wrote:
> > > Greetings to all virtualbox users,
> > > this is my first post here.
> > >
> > > I'm using virtualbox-ose 1.5.2 on a Debian Lenny system.
> > >
> > > I settep up an Ubuntu server and I would like to get it work as a
> > > gateway between the host and a windows machine, whic I settep up as a
> > > VM with virtualbox and connected to the internal lan.
> > >
> > > My problem is that I can't get the host interface on the guest
> > > recognized.
> > >
> > > This is my situation:
> > >
> > > [EMAIL PROTECTED] ~> ifconfig
> > > br0 Link encap:Ethernet HWaddr 00:1A:4B:5C:8E:D5
> > > inet addr:10.88.3.67 Bcast:10.88.3.255 Mask:255.255.255.0
> > > inet6 addr: fe80::21a:4bff:fe5c:8ed5/64 Scope:Link
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:3800 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:2944 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:1823702 (1.7 MiB) TX bytes:325693 (318.0 KiB)
> > >
> > > eth1 Link encap:Ethernet HWaddr 00:1A:4B:5C:8E:D5
> > > inet6 addr: fe80::21a:4bff:fe5c:8ed5/64 Scope:Link
> > > UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
> > > RX packets:10459 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:8926 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:1000
> > > RX bytes:6108811 (5.8 MiB) TX bytes:1068324 (1.0 MiB)
> > > Interrupt:16
> > >
> > > loLink encap:Local Loopback
> > > inet addr:127.0.0.1 Mask:255.0.0.0
> > > inet6 addr: ::1/128 Scope:Host
> > > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > > RX packets:5530 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:5530 errors:0 dropped:0 overruns:0 carrier:0
> > > collisions:0 txqueuelen:0
> > > RX bytes:3657503 (3.4 MiB) TX bytes:3657503 (3.4 MiB)
> > >
> > > tap0 Link encap:Ethernet HWaddr 00:FF:6A:31:29:CA
> > > inet addr:10.88.3.50 Bcast:10.255.255.255 Mask:255.0.0.0
> > > inet6 addr: fe80::2ff:6aff:fe31:29ca/64 Scope:Link
> > > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > > RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > TX packets:2 errors:0 dropped:45 overruns:1 carrier:0
> > > collisions:0 txqueuelen:500
> > > RX bytes:0 (0.0 b) TX bytes:460 (460.0 b)
> > >
> > > [EMAIL PROTECTED] ~> brctl show br0
> > > bridge name bridge id STP enabled interfaces
> > > br0 8000.001a4b5c8ed5 no eth1
> > > tap0
> > >
> > > I created the tap0 interface with tunctl, then I added it to the br0
> > > bridge, and I marked tap0 in the network setup mask, so now I have for
> > > the ubuntu host:
> > >
> > > Network
> > > Adapter 0: intnet
> > > Adapter 1: tap0
> > >
> > > The internal interface is recognized without problems with ifconfig,
> > > but then I can't recognize the internal interface, only the lo and
> > > eth0 interfaces are detected.
> > >
> > > In the manual (which is missing in the Debian package) I also noticed
> > > that it recommends to call the host interfaces with names like vbox0,
> > > vbox1 ... etc, could be this the issue?
> >
> > I replaced tap0 with vbox0 following this procedure (in the host):
> > tunctl -t vbox0 -u
> > brctl addbr br0 vbox0
> > ifconfig vbox0 up
> >
> > then I changed the name of the adapter1 for the guest network
> > interface, then I booted the guest again... no luck, still can't
> > recognize the host network interface :-(.
> >
> > > Just another thing: the VBoxAddIF and VBoxDelIF commands mentioned in
> > > the manual are missing in the Debian package, so I created the tun
> > > interface with tunctl from the uml-utilities package.
> > > Is it the right way to startup them (and why the VBoxAddIF and
> > > VBoxDelIF commands are missing in Debian?)?
> > >
> > > Many virtual thanks in advance, I'm starting just now with
> > > virtualization and I'm very puzzled.
>
> Ehm... I tried to swap the internal adapter and the host interface
> adapter, now the situation is this...
>
> eth0 is correctly detected and corresponds to the host network
> interface, so I can happily ping the host machine connected to it...
> the problem is that now there isn't the interface for the internal
> network.
>
> I can see in the window popping up when the cursor floats over the
> network icon in the host window:
> Adapter 0 (Host Interface): cable connected
> Adapter 1 (Internal Network): cable connected
>
> The problem se