[Veritas-bu] Migrate Backup Exec to NetBackup
Hi All, I have plan to migrate our Backup Exec 11 to NetBackup 7. Any one of you have an experience to do that? I very appreciate if you share it to me. Thanks. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Oracle Backup Problem
The name is fmspdb3. Btw, I've decided to increase the required_client_timeout base on the error status = 54. Have you or any one ever customize the setting mentioned above ? Please kindly share your experience. Rgds, Moehatdee On Tue, May 25, 2010 at 12:52 PM, Marianne Van Den Berg mvdb...@stortech.co.za wrote: Please send dbclient log? Please confirm – which name is configured in policy? Which client name is sent from media server/client? Is this client name hard-coded in script? Does it correspond with client name in policy? Please check bprd log file on master. Look for incoming request from Media server/client ip address. See in same log if master server resolves ip address to correct client name as per the policy. Regards M. *From:* veritas-bu-boun...@mailman.eng.auburn.edu [mailto: veritas-bu-boun...@mailman.eng.auburn.edu] *On Behalf Of *moehatdee *Sent:* 25 May 2010 05:44 AM *To:* Martin, Jonathan *Cc:* veritas-bu@mailman.eng.auburn.edu *Subject:* Re: [Veritas-bu] Oracle Backup Problem Yes, Oracle running on Media Server as a Oracle client and I have a scheduled backup configured in an Oracle policy for this client. This scheduled backup was running well before. It just happened in this last week. When backing up an Oracle for two hours, it shown a message said that failed. Moehatdee On Tue, May 25, 2010 at 9:11 AM, Martin, Jonathan jmart...@intersil.com wrote: By media, do you mean the source / oracle client? What does the client = line say on the oracle server? Do you have an automatic backup schedule configured in an ORACLE policy for this client? -Jonathan -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of moehatdee Sent: Monday, May 24, 2010 10:07 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Oracle Backup Problem Hi All, I have problem when scheduled back up Oracle database with the following error message: RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of backup command on ch05 channel at 05/20/2010 22:12:25 ORA-19506: failed to create sequential file, name=bk_8473_1_719531824, parms= ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: VxBSACreateObject: Failed with error: Server Status: Communication with the server has not been initiated or the server status has not been retrieved from the serve RMAN Recovery Manager complete. Below is the setting and configuration of NetBackup: - NetBackup 6.0MP7 - bp.conf in master SERVER = fmspdb3 - bp.conf in media SERVER = fmspdb3 - hosts entry in master 10.147.248.162fmspdb3 fmspdb3-common - hosts entry in media 10.147.248.162fmspdb3-common - traceroute from master using IP 10.147.248.162 - traceroute from media using IP 10.147.248.162 - ping to each other was successfull. - backing up file system is running well. Please give your experience to solving my problem with the clue mentioned above. Any help and suggestion is really appreciate. Thanks. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Oracle Backup Problem
Hi All, I have problem when scheduled back up Oracle database with the following error message: RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of backup command on ch05 channel at 05/20/2010 22:12:25 ORA-19506: failed to create sequential file, name=bk_8473_1_719531824, parms= ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: VxBSACreateObject: Failed with error: Server Status: Communication with the server has not been initiated or the server status has not been retrieved from the serve RMAN Recovery Manager complete. Below is the setting and configuration of NetBackup: - NetBackup 6.0MP7 - bp.conf in master SERVER = fmspdb3 - bp.conf in media SERVER = fmspdb3 - hosts entry in master 10.147.248.162fmspdb3 fmspdb3-common - hosts entry in media 10.147.248.162fmspdb3-common - traceroute from master using IP 10.147.248.162 - traceroute from media using IP 10.147.248.162 - ping to each other was successfull. - backing up file system is running well. Please give your experience to solving my problem with the clue mentioned above. Any help and suggestion is really appreciate. Thanks. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Oracle Backup Problem
Yes, Oracle running on Media Server as a Oracle client and I have a scheduled backup configured in an Oracle policy for this client. This scheduled backup was running well before. It just happened in this last week. When backing up an Oracle for two hours, it shown a message said that failed. Moehatdee On Tue, May 25, 2010 at 9:11 AM, Martin, Jonathan jmart...@intersil.comwrote: By media, do you mean the source / oracle client? What does the client = line say on the oracle server? Do you have an automatic backup schedule configured in an ORACLE policy for this client? -Jonathan -Original Message- From: veritas-bu-boun...@mailman.eng.auburn.edu [mailto:veritas-bu-boun...@mailman.eng.auburn.edu] On Behalf Of moehatdee Sent: Monday, May 24, 2010 10:07 PM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Oracle Backup Problem Hi All, I have problem when scheduled back up Oracle database with the following error message: RMAN-00571: === RMAN-00569: === ERROR MESSAGE STACK FOLLOWS === RMAN-00571: === RMAN-03009: failure of backup command on ch05 channel at 05/20/2010 22:12:25 ORA-19506: failed to create sequential file, name=bk_8473_1_719531824, parms= ORA-27028: skgfqcre: sbtbackup returned error ORA-19511: Error received from media manager layer, error text: VxBSACreateObject: Failed with error: Server Status: Communication with the server has not been initiated or the server status has not been retrieved from the serve RMAN Recovery Manager complete. Below is the setting and configuration of NetBackup: - NetBackup 6.0MP7 - bp.conf in master SERVER = fmspdb3 - bp.conf in media SERVER = fmspdb3 - hosts entry in master 10.147.248.162fmspdb3 fmspdb3-common - hosts entry in media 10.147.248.162fmspdb3-common - traceroute from master using IP 10.147.248.162 - traceroute from media using IP 10.147.248.162 - ping to each other was successfull. - backing up file system is running well. Please give your experience to solving my problem with the clue mentioned above. Any help and suggestion is really appreciate. Thanks. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Disk Staging With Operation Status = 0
Dear All, I have configured DSSU (Disk Staging Storage Unit) and FSU (Final Destination Storage Unit) on NetBackup 6.0MP7 running on Solaris 10 Media Server. When the capacity reached 100% of capacity, the schedule was running but the data cannot be stagged or moved to tape. Would you like to share your experience how to solve this problem. Appreciate for your helping. Below is the detail job status: - requesting resource .NBU_CLIENT.MAXJOBS.X - requesting resource .NBU_POLICY.MAXJOB_DSSU_POLICY__dssu_01 - granted resource .NBU_CLIENT.MAXJOBS. - granted resource .NBU_POLICYMAXJOBS_DSSU_POLICY_ - begin Parent Job - begin Disk Staging: Execute Script - Started process bpbrm (pid=95890) - end writing Operation Status: 0 - end Disk Staging: Execute Script, elapsed time 0:00:02 - begin Disk Staging: Validate Image - Operation Status: 0 - end Disk Staging: Validate Image; elapsed time 0:00:00 - end Parent Job: elapsed time 0:00:02 the requested operation was successfully completed. Detail configuration is: 1. Disk Storage Unit properties: - High low Water Mark are default (98% and 80%) - Enable Temporary Storage Area is checked. 2. Disk Staging schedule properties: - priority of relocation jobs started from this schedule : 9 - final destination storage unit : sl8000 - final destination volume : test - schedule type : calendar - Start Window : Sunday 12:00:00 - Sunday 16:00:00 - calendar schedule : Sunday-Saturday, are cheched. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Redirect Restore Oracle
Hi All, Currently we are using NetBackup 6.0 and Oracle 10. The configuration is including: - NetBackup Master Server (6.0MP7) - NetBackup Media Server (6.0MP7) and Oracle Agent (source backup) - NetBackup Agent (6.0MP7) and Oracle Agent (destination restore) The Oracle backup in Media Server is working fine and using RMAN. Then I need to restore the Oracle of source backed up into another Oracle Agent (destination restore). Anyone has ever performing alternate restore to another agent, please kindly share your experience to me how to customize the RMAN script and requirements in the NetBackup side. Your help is appreciated. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Run a script for restoring Oracle database
Hi All, The Oracle database has backed up properly using RMAN. And then I need to restore to another Oracle server machine. Please give me advise: 1. If I put the script in the backup selection list of NetBackup Policy, let say restore.sh, does it work for restoring Oracle ? Just right click the policy name and select backup manual. 2. Do you have best practice to alternate restore ? Thanks for your advise. Regards, Muhadi ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] NetBackup Master Server is older than NetBackup client version
Hi all, I want to redirect restore an oracle database using RMAN. I have three SUN machines that configured like this: 1 machine as Master Server wiht NetBackup 6.0MP7 1 machine as Client with NetBackup and Oracle Agent 6.0MP7 1 machine as Client with NetBackup and Oracle Agent 6.5 My Question are: - Does it work if Master Server is NetBackp 6.0 and the client is NetBackup 6.5 ? - Can we redirect restore a Oracle database from NetBackup 6.0 to NetBackup 6.5 ? I very appreciate for your advise. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] LTO-4
I have a plan to upgrade my library from ADIC scalari100 to Scalari2000 and LTO-4. Currently I used NetBackup 6.0 MP4. Can you inform me please which version of NetBackup software that support LTO-4? I'am waiting for your information. Thanks. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] clone or duplicate tape
Hi Dears, Does NetBackup 6.5 able to clone a tape automatically after completing a backup as EMC NetWorker did?. As EMC NetWorker we can configure in the Group properties by clicking the clone box option. Clone will run automatically when Group is completed. In NetBackup 6.5, how to do it? Please kindly share your experience. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Upgrade Media Server 6.5 on Tru64 is failed.
Hi NetBackup Experts, I have tried to upgrade NetBackup Media Server version 6.0 to 6.5 on Tru64, but it was failed with the following error message Unknown platform type: nosupport. . Below is the detail upgrade process and error message: # /mnt/install Symantec Installation Script Copyright 1993 - 2007 Symantec Corporation, All Rights Reserved. Installing NetBackup Server Software NOTE: To install only NetBackup Client software locally on this machine or to load additional UNIX client software on this server, insert the NetBackup UNIX Clients cdrom. Do you wish to continue? [y,n] (y) The NetBackup and Media Manager software is built for use on ALPHA hardware. NetBackup is currently at release level 6.0MP4. This package will install release level 6.5. Do you want to reinstall NetBackup and Media Manager? [y,n] (y) Done executing NB.inst. If you ran NB.inst instead of cdrom_path/install, you must run /usr/openv/netbackup/bin/install_bp to initiate NetBackup. Running /usr/openv/netbackup/bin/install_bp -p /mnt Unknown platform type: nosupport. File /usr/openv/tmp/install_trace.464407 contains a trace of this install. That file can be deleted after you are sure the install was successful. # # Please kindly give us an advance. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] About NetBackup 6.0 license
Hi All, I have three Unix boxes running HP-UX 11.0, one library with 4 drives, all are connected to SAN. I'm using NetBackup software version 6.0. I configured my backup system as the following: 1. Master EMM Server - HP-UX 11.0 - shared drive - Oracle 9i 2. Media Server - HP UX 11.0 - shared drive - Oracle 8 3. Media Server - HP UX 11.0 - shared drive - Oracle 10g My questions are: - which licenses should I provide for this configuration. - which licenses should be applied on each Master Server and Media Servers. Thanks for your help. Regards, Moehatdee ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Upgrade NetBackup 6.0 to 6.5
I have plan to upgrade NetBackup 6.0 to 6.5. - master server : HP-UX, 11.0 - media server : Tru64, 5.1B and Agent for Oracle - client server ; Tru64,5.1B Maybe any one of you have ever performed upgrade NetBackup 6.0 to 6.5 on HP-UX. Could you share to me please? Regards, Muhadi ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
