Re: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout
https://xdevs.com/fix/d1281/ On Sun, Feb 7, 2016 at 6:43 PM, wrote: > Hi Todd, > have tried to find the information @ xDevs. No luck. > Is there a link you can share? > > BR > PeLuLe > > > > Gesendet: Sonntag, 07. Februar 2016 um 21:59 Uhr > > Von: "Todd Micallef" > > An: "Discussion of precise voltage measurement" > > Betreff: Re: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for > CALRAM-Readout > > > > PeLuLe, > > > > I am currently working on two 1281's. If you have anything you would like > > me to try, let me know. I am certain my cal constants are not good on one > > of them. The battery was just changed a few days ago and it appears to be > > the original from '87. I also had some intermittent NVRAM errors. > > > > Replacing caps worked for the first 1281 and cleared the DCV 2182 error. > > The project is a WIP and everything is being documented on xDevs. > > > > Also, please post your FW versions. Both of mine are at different revs > and > > I would like to know the different versions from Datron/Wavetek > > > > On Sun, Feb 7, 2016 at 2:33 PM, wrote: > > > > > > > > > > > > Gesendet: Sonntag, 07. Februar 2016 um 18:30 Uhr > > > > Von: ludger.len...@gmx.de > > > > An: volt-nuts-boun...@febo.com > > > > Cc: "Adrian Bernhard" > > > > Betreff: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout > > > > > > > > Hi volt-nuts > > > > > > > > I like to backup the Datron 1281 CAL RAM data. Mine need to be > > > refurbished (caps replacement, case cleaning...) > > > > The 1281 quite good in cal (~3ppm difference to my 3458A which had > last > > > cal 2014/OCT), which I don't want to risk. > > > > In any case this migh a helful knowledge for all of us. > > > > > > > > I am lucky having another 1281 "for part" without a Display- and > > > DC-Assembly but a wokring Digital Board. > > > > I dumped the ROM to have a deep look into the GPIB commands and > searched > > > for potential undocumented existing > > > > (like it was done for the 3458A already). > > > > > > > > I found following, in the service and user manual not documented, > > > potential commands (?): > > > > RAM = may a RAM command, seems to be the best chance > > > > PRIM = may a subfunction of RAM for primary RAM > > > > SECN = may a subfunction of RAM for secondary RAM > > > > > > > > IPZ = no glue yet > > > > > > > > YEUK = command to set something, no glue yet about function > > > > YEUK? = query comand of the YEUK command > > > > > > > > CALISS? = seems to be a qery for calibration purpose > > > > > > > > To (hopefully) save some of the allways limited private time, I would > > > like to aks, if some of you have seen that commands (?) or have more > > > details on them. They may used at other Daltron tools also... > > > > Next I will start with the debugging of the unknown remaining > commands > > > on processor board level. > > > > > > > > Thanks for help already in advance. > > > > BR > > > > PeLuLe > > > > > > > > > > > > > > > ___ > > > volt-nuts mailing list -- volt-nuts@febo.com > > > To unsubscribe, go to > > > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > > and follow the instructions there. > > > > > ___ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > and follow the instructions there. > > > ___ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > ___ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
Re: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout
Hi Todd, have tried to find the information @ xDevs. No luck. Is there a link you can share? BR PeLuLe > Gesendet: Sonntag, 07. Februar 2016 um 21:59 Uhr > Von: "Todd Micallef" > An: "Discussion of precise voltage measurement" > Betreff: Re: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for > CALRAM-Readout > > PeLuLe, > > I am currently working on two 1281's. If you have anything you would like > me to try, let me know. I am certain my cal constants are not good on one > of them. The battery was just changed a few days ago and it appears to be > the original from '87. I also had some intermittent NVRAM errors. > > Replacing caps worked for the first 1281 and cleared the DCV 2182 error. > The project is a WIP and everything is being documented on xDevs. > > Also, please post your FW versions. Both of mine are at different revs and > I would like to know the different versions from Datron/Wavetek > > On Sun, Feb 7, 2016 at 2:33 PM, wrote: > > > > > > > > Gesendet: Sonntag, 07. Februar 2016 um 18:30 Uhr > > > Von: ludger.len...@gmx.de > > > An: volt-nuts-boun...@febo.com > > > Cc: "Adrian Bernhard" > > > Betreff: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout > > > > > > Hi volt-nuts > > > > > > I like to backup the Datron 1281 CAL RAM data. Mine need to be > > refurbished (caps replacement, case cleaning...) > > > The 1281 quite good in cal (~3ppm difference to my 3458A which had last > > cal 2014/OCT), which I don't want to risk. > > > In any case this migh a helful knowledge for all of us. > > > > > > I am lucky having another 1281 "for part" without a Display- and > > DC-Assembly but a wokring Digital Board. > > > I dumped the ROM to have a deep look into the GPIB commands and searched > > for potential undocumented existing > > > (like it was done for the 3458A already). > > > > > > I found following, in the service and user manual not documented, > > potential commands (?): > > > RAM = may a RAM command, seems to be the best chance > > > PRIM = may a subfunction of RAM for primary RAM > > > SECN = may a subfunction of RAM for secondary RAM > > > > > > IPZ = no glue yet > > > > > > YEUK = command to set something, no glue yet about function > > > YEUK? = query comand of the YEUK command > > > > > > CALISS? = seems to be a qery for calibration purpose > > > > > > To (hopefully) save some of the allways limited private time, I would > > like to aks, if some of you have seen that commands (?) or have more > > details on them. They may used at other Daltron tools also... > > > Next I will start with the debugging of the unknown remaining commands > > on processor board level. > > > > > > Thanks for help already in advance. > > > BR > > > PeLuLe > > > > > > > > > > > ___ > > volt-nuts mailing list -- volt-nuts@febo.com > > To unsubscribe, go to > > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > > and follow the instructions there. > > > ___ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > ___ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
Re: [volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout
PeLuLe, I am currently working on two 1281's. If you have anything you would like me to try, let me know. I am certain my cal constants are not good on one of them. The battery was just changed a few days ago and it appears to be the original from '87. I also had some intermittent NVRAM errors. Replacing caps worked for the first 1281 and cleared the DCV 2182 error. The project is a WIP and everything is being documented on xDevs. Also, please post your FW versions. Both of mine are at different revs and I would like to know the different versions from Datron/Wavetek On Sun, Feb 7, 2016 at 2:33 PM, wrote: > > > > Gesendet: Sonntag, 07. Februar 2016 um 18:30 Uhr > > Von: ludger.len...@gmx.de > > An: volt-nuts-boun...@febo.com > > Cc: "Adrian Bernhard" > > Betreff: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout > > > > Hi volt-nuts > > > > I like to backup the Datron 1281 CAL RAM data. Mine need to be > refurbished (caps replacement, case cleaning...) > > The 1281 quite good in cal (~3ppm difference to my 3458A which had last > cal 2014/OCT), which I don't want to risk. > > In any case this migh a helful knowledge for all of us. > > > > I am lucky having another 1281 "for part" without a Display- and > DC-Assembly but a wokring Digital Board. > > I dumped the ROM to have a deep look into the GPIB commands and searched > for potential undocumented existing > > (like it was done for the 3458A already). > > > > I found following, in the service and user manual not documented, > potential commands (?): > > RAM = may a RAM command, seems to be the best chance > > PRIM = may a subfunction of RAM for primary RAM > > SECN = may a subfunction of RAM for secondary RAM > > > > IPZ = no glue yet > > > > YEUK = command to set something, no glue yet about function > > YEUK? = query comand of the YEUK command > > > > CALISS? = seems to be a qery for calibration purpose > > > > To (hopefully) save some of the allways limited private time, I would > like to aks, if some of you have seen that commands (?) or have more > details on them. They may used at other Daltron tools also... > > Next I will start with the debugging of the unknown remaining commands > on processor board level. > > > > Thanks for help already in advance. > > BR > > PeLuLe > > > > > > > ___ > volt-nuts mailing list -- volt-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts > and follow the instructions there. > ___ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
[volt-nuts] Fw: Just uploaded to KO4BB: Datron 1281 User Manual & Service Manual
volt-nuts@febo.com > Gesendet: Sonntag, 07. Februar 2016 um 19:52 Uhr > Von: ludger.len...@gmx.de > An: volt-nuts , "VOLT NUTS" > Betreff: Just uploaded to KO4BB: Datron 1281 User Manual & Service Manual > > Hi folks, > > as the owner of the Datron manuals copyright has stopped the business and has > given all docs and rigths to the "Internet Archive", I am now free to upload > some documents to Didier great site (KO4BB). > I uploaded 3 files: > 1. an optimzed/better version of user manual (with bookmarks & quick links) > 2. HQ scan of the complete service manuals Vol1&Vol2 (including drawings & > schematics) > 3. HQ scan of the drawing out of service manual Vol2 (only drawings & > schematics) > Hope it is of interest. > > Remark: it's a lot of data (compession/zipping did just minor reduction thus > haven't done it). > > BR > PeLuLe > ___ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.
[volt-nuts] Fw: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout
> Gesendet: Sonntag, 07. Februar 2016 um 18:30 Uhr > Von: ludger.len...@gmx.de > An: volt-nuts-boun...@febo.com > Cc: "Adrian Bernhard" > Betreff: Datron 1281 / 1271 secret GPIB cmds for CALRAM-Readout > > Hi volt-nuts > > I like to backup the Datron 1281 CAL RAM data. Mine need to be refurbished > (caps replacement, case cleaning...) > The 1281 quite good in cal (~3ppm difference to my 3458A which had last cal > 2014/OCT), which I don't want to risk. > In any case this migh a helful knowledge for all of us. > > I am lucky having another 1281 "for part" without a Display- and DC-Assembly > but a wokring Digital Board. > I dumped the ROM to have a deep look into the GPIB commands and searched for > potential undocumented existing > (like it was done for the 3458A already). > > I found following, in the service and user manual not documented, potential > commands (?): > RAM = may a RAM command, seems to be the best chance > PRIM = may a subfunction of RAM for primary RAM > SECN = may a subfunction of RAM for secondary RAM > > IPZ = no glue yet > > YEUK = command to set something, no glue yet about function > YEUK? = query comand of the YEUK command > > CALISS? = seems to be a qery for calibration purpose > > To (hopefully) save some of the allways limited private time, I would like to > aks, if some of you have seen that commands (?) or have more details on them. > They may used at other Daltron tools also... > Next I will start with the debugging of the unknown remaining commands on > processor board level. > > Thanks for help already in advance. > BR > PeLuLe > > > ___ volt-nuts mailing list -- volt-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/volt-nuts and follow the instructions there.