Re: [vpp-dev] [vpp] VXLAN arp response packet is dropped

2018-07-25 Thread

Hi neale-san,

I'm sorry for the delay in replying your e-mail.
We analyzed, it was found that NIC driver doesn't support.
So, We will try the other NIC.

Thank you for your support in your busy time.

Thanks
Satomi

On 2018/07/18 19:48, Neale Ranns (nranns) wrote:

Hi Satomi,

That’s a big trace. Can you point to an example of a packet drop that is 
causing you problems.

Thanks
neale



-Original Message-
From: 井上里美 
Date: Wednesday, 18 July 2018 at 10:58
To: "Neale Ranns (nranns)" , "vpp-dev@lists.fd.io" 

Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML , 
小柳達也様 , N転P_西岡孟朗様 
Subject: [WARNING :  MESSAGE ENCRYPTED] Re: [vpp] VXLAN arp response packet is 
dropped

 Hi, neale san,
 
 Thank you for your reply.

 Sure!
 
 Satomi
 
 On 2018/07/18 17:27, Neale Ranns (nranns) wrote:

 > Can I see the packet trace?
 >
 > /neale
 >
 > -Original Message-
 > From: 井上里美 
 > Date: Wednesday, 18 July 2018 at 09:54
 > To: "Neale Ranns (nranns)" , "vpp-dev@lists.fd.io" 

 > Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML 
, 小柳達也様 , N転P_西岡孟朗様 

 > Subject: [vpp] VXLAN arp response packet is dropped
 >
 >  Hi neale san,
 >
 >  Thank you for your reply.
 >  We used a vpp packet trace.
 >  show trace is no error but on the caputure device,ARP request 
packet is
 >  droped.
 >  It happend the same event even L2.
 >
 >  Could you give me some advice?
 >
 >  【Architecture】
 >    __
 >  |    |→caputure device→IXIA(port 2)
 >  |VPP|
 >  |   |←IXIA(port 1)
 >  |__|
 >
 >  On 2018/07/06 21:39, Neale Ranns (nranns) wrote:
 >  > Hi Satomi
 >  >
 >  > Debugging packet loss is much easier with a VPP packet trace…
 >  >
 >  > Regards,
 >  > neale
 >  >
 >  > -Original Message-
 >  > From:  on behalf of 井上里美 

 >  > Date: Friday, 6 July 2018 at 12:38
 >  > To: "vpp-dev@lists.fd.io" 
 >  > Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML 
, 小柳達也様 , N転P_西岡孟朗様 

 >  > Subject: [vpp-dev] [pw] [vpp] VXLAN arp response packet is dropped
 >  >
 >  >  The password is here.
 >  >  1j^?iKvC]C;%
 >  >
 >  >  On 2018/07/06 19:37, 井上里美 wrote:
 >  >  > Hi VPP Team,
 >  >  >
 >  >  > I'm Satomi Inoue and I belong to NTT laboratories.
 >  >  > Could you tell me why ARP response packet is dropped?
 >  >  >
 >  >  > We set up vxlan while looking at
 >  >  > ”Using_VPP_as_a_VXLAN_Tunnel_Terminator”manual.
 >  >  > The procedure is as follows.
 >  >  >
 >  >  > [The result]
 >  >  > ・ARP request packet : IXIA(port2)→VPP→IXIA(port1):OK
 >  >  > ・ARP response packet : IXIA(port1)→VPP→IXIA(port2):NG
 >  >  >  →We checked it by trace command. Loopback interface in 
VPP drop the
 >  >  > ARP response packet.
 >  >  >
 >  >  > [set up vxlan]
 >  >  > 1. Create sub-interface
 >  >  > vpp# create sub-interfaces 
VirtualFunctionEthernet0/9/0 1
 >  >  > vpp# set interface state 
VirtualFunctionEthernet0/9/0.1 up
 >  >  >
 >  >  > 2. Create bridge-domain
 >  >  > create bridge-domain 10001 learn 1 forward 1 uu-flood 
1 arp-term 0
 >  >  >
 >  >  > 3. Create Loopback interface
 >  >  > vpp# loopback create mac 1a:2b:3c:4d:5e:6f
 >  >  > vpp# set interface state loop0 up
 >  >  > vpp# set interface ip address loop0 1.1.1.1/32
 >  >  > vpp# set interface ip table loop0 7
 >  >  >
 >  >  > 4. Apply loopback interface to bride-domain
 >  >  > vpp# set interface l2 bridge loop0 10001 bvi
 >  >  >
 >  >  > 5.Apply sub-interface to bride-domain
 >  >  > vpp# set interface l2 bridge 
VirtualFunctionEthernet0/9/0.1 10001 0
 >  >  >
 >  >  > 6.Create VXLAN tunnel
 >  >  > vpp# 

Re: [vpp-dev] [vpp] VXLAN arpresponse packet is dropped

2018-07-19 Thread

Hi Chris,

It's embarrassing, but I did not think well enough.
I won't use zip files from now on.

Satomi,

On 2018/07/18 21:23, Luke, Chris wrote:

Satomi,

Please consider using services like pastebin or gist for posting text files. 
Attachments like zip files, and especially password protected ones,  don't 
really belong on mailing lists.

Not least because my security people get excited and delete such messages on 
sight (antivirus can't scan inside), but they're wasteful when you consider 
everyone on the list gets a copy.

Thanks,
Chris.


-Original Message-
From: vpp-dev@lists.fd.io [mailto:vpp-dev@lists.fd.io] On Behalf Of 
Sent: Wednesday, July 18, 2018 5:00 AM
To: Neale Ranns (nranns) ; vpp-dev@lists.fd.io
Cc: Norimasa Asai (noasai) ; エッジ仮想化hcoML
; 小柳達也様
; N転P_西岡孟朗様

Subject: [EXTERNAL] Re: [vpp-dev] (nten-vedge-ml 357) Re: [vpp] VXLAN arp
response packet is dropped

The password is here.

E!(k,g

On 2018/07/18 17:58, 井上里美 wrote:

Hi, neale san,

Thank you for your reply.
Sure!

Satomi

On 2018/07/18 17:27, Neale Ranns (nranns) wrote:

Can I see the packet trace?

/neale

-Original Message-
From: 井上里美 
Date: Wednesday, 18 July 2018 at 09:54
To: "Neale Ranns (nranns)" , "vpp-dev@lists.fd.io"

Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML
, 小柳達也様
, N転P_西岡孟朗様

Subject: [vpp] VXLAN arp response packet is dropped

  Hi neale san,
      Thank you for your reply.
  We used a vpp packet trace.
  show trace is no error but on the caputure device,ARP request
packet is
  droped.
  It happend the same event even L2.
      Could you give me some advice?
      【Architecture】
    __
  |    |→caputure device→IXIA(port 2)
  |VPP|
  |   |←IXIA(port 1)
  |__|
      On 2018/07/06 21:39, Neale Ranns (nranns) wrote:
  > Hi Satomi
  >
  > Debugging packet loss is much easier with a VPP packet trace…
  >
  > Regards,
  > neale
  >
  > -----Original Message-
  > From:  on behalf of 井上里美

  > Date: Friday, 6 July 2018 at 12:38
  > To: "vpp-dev@lists.fd.io" 
  > Cc: "Norimasa Asai (noasai)" , エッジ仮想化

hcoML

, 小柳達也様
, N転P_西岡孟朗様

  > Subject: [vpp-dev] [pw] [vpp] VXLAN arp response packet is
dropped
  >
  >      The password is here.
  >  1j^?iKvC]C;%
  >
  >  On 2018/07/06 19:37, 井上里美 wrote:
  >  > Hi VPP Team,
  >  >
  >  > I'm Satomi Inoue and I belong to NTT laboratories.
  >  > Could you tell me why ARP response packet is dropped?
  >  >
  >  > We set up vxlan while looking at
  >  > ”Using_VPP_as_a_VXLAN_Tunnel_Terminator”manual.
  >  > The procedure is as follows.
  >  >
  >  > [The result]
  >  > ・ARP request packet : IXIA(port2)→VPP→IXIA(port1):OK
  >  > ・ARP response packet : IXIA(port1)→VPP→IXIA(port2):NG
  >  >  →We checked it by trace command. Loopback interface in
VPP drop the
  >  > ARP response packet.
  >  >
  >  > [set up vxlan]
  >  > 1. Create sub-interface
  >  > vpp# create sub-interfaces
VirtualFunctionEthernet0/9/0 1
  >  > vpp# set interface state
VirtualFunctionEthernet0/9/0.1 up
  >  >
  >  > 2. Create bridge-domain
  >  > create bridge-domain 10001 learn 1 forward 1
uu-flood 1 arp-term 0
  >  >
  >  > 3. Create Loopback interface
  >  > vpp# loopback create mac 1a:2b:3c:4d:5e:6f
  >  > vpp# set interface state loop0 up
  >  > vpp# set interface ip address loop0 1.1.1.1/32
  >  > vpp# set interface ip table loop0 7
  >  >
  >  > 4. Apply loopback interface to bride-domain
  >  > vpp# set interface l2 bridge loop0 10001 bvi
  >  >
  >  > 5.Apply sub-interface to bride-domain
  >  > vpp# set interface l2 bridge
VirtualFunctionEthernet0/9/0.1 10001 0
  >  >
  >  > 6.Create VXLAN tunnel
  >  > vpp# create vxlan tunnel src 1.1.1.1 dst 20.10.0.1
vni 10001
  >  > encap-vrf-id 7 decap-next l2
  >  > vpp# set interface l2 bridge vxlan_tunnel0 10001 1
  >  >
  >  > Regards,
  >  > Satomi
  >
  >  --
  >
  >
  >
  >
  >
      --
  -
      井上里美(Satomi Inoue)
  〒180-8585 東京都武蔵野市緑町3-9-11
  PHONE:0422-59-4151
  E-MAIL:inoue.sat...@lab.ntt.co.jp


--
-

Re: [vpp-dev] (nten-vedge-ml 357) Re: [vpp] VXLAN arp response packet is dropped

2018-07-18 Thread

The password is here.

E!(k,g

On 2018/07/18 17:58, 井上里美 wrote:

Hi, neale san,

Thank you for your reply.
Sure!

Satomi

On 2018/07/18 17:27, Neale Ranns (nranns) wrote:

Can I see the packet trace?

/neale

-Original Message-
From: 井上里美 
Date: Wednesday, 18 July 2018 at 09:54
To: "Neale Ranns (nranns)" , "vpp-dev@lists.fd.io" 

Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML 
, 小柳達也様 
, N転P_西岡孟朗様 


Subject: [vpp] VXLAN arp response packet is dropped

 Hi neale san,
     Thank you for your reply.
 We used a vpp packet trace.
 show trace is no error but on the caputure device,ARP request 
packet is

 droped.
 It happend the same event even L2.
     Could you give me some advice?
     【Architecture】
   __
 |    |→caputure device→IXIA(port 2)
 |VPP|
 |   |←IXIA(port 1)
 |__|
     On 2018/07/06 21:39, Neale Ranns (nranns) wrote:
 > Hi Satomi
 >
 > Debugging packet loss is much easier with a VPP packet trace…
 >
 > Regards,
 > neale
 >
 > -----Original Message-
 > From:  on behalf of 井上里美 


 > Date: Friday, 6 July 2018 at 12:38
 > To: "vpp-dev@lists.fd.io" 
 > Cc: "Norimasa Asai (noasai)" , エッジ仮想化hcoML 
, 小柳達也様 
, N転P_西岡孟朗様 

 > Subject: [vpp-dev] [pw] [vpp] VXLAN arp response packet is 
dropped

 >
 >      The password is here.
 >  1j^?iKvC]C;%
 >
 >  On 2018/07/06 19:37, 井上里美 wrote:
 >  > Hi VPP Team,
 >  >
 >  > I'm Satomi Inoue and I belong to NTT laboratories.
 >  > Could you tell me why ARP response packet is dropped?
 >  >
 >  > We set up vxlan while looking at
 >  > ”Using_VPP_as_a_VXLAN_Tunnel_Terminator”manual.
 >  > The procedure is as follows.
 >  >
 >  > [The result]
 >  > ・ARP request packet : IXIA(port2)→VPP→IXIA(port1):OK
 >  > ・ARP response packet : IXIA(port1)→VPP→IXIA(port2):NG
 >  >  →We checked it by trace command. Loopback interface in 
VPP drop the

 >  > ARP response packet.
 >  >
 >  > [set up vxlan]
 >  > 1. Create sub-interface
 >  > vpp# create sub-interfaces 
VirtualFunctionEthernet0/9/0 1
 >  > vpp# set interface state 
VirtualFunctionEthernet0/9/0.1 up

 >  >
 >  > 2. Create bridge-domain
 >  > create bridge-domain 10001 learn 1 forward 1 
uu-flood 1 arp-term 0

 >  >
 >  > 3. Create Loopback interface
 >  > vpp# loopback create mac 1a:2b:3c:4d:5e:6f
 >  > vpp# set interface state loop0 up
 >  > vpp# set interface ip address loop0 1.1.1.1/32
 >  > vpp# set interface ip table loop0 7
 >  >
 >  > 4. Apply loopback interface to bride-domain
 >  > vpp# set interface l2 bridge loop0 10001 bvi
 >  >
 >  > 5.Apply sub-interface to bride-domain
 >  > vpp# set interface l2 bridge 
VirtualFunctionEthernet0/9/0.1 10001 0

 >  >
 >  > 6.Create VXLAN tunnel
 >  > vpp# create vxlan tunnel src 1.1.1.1 dst 20.10.0.1 
vni 10001

 >  > encap-vrf-id 7 decap-next l2
 >  > vpp# set interface l2 bridge vxlan_tunnel0 10001 1
 >  >
 >  > Regards,
 >  > Satomi
 >
 >  --
 >
 >
 >
 >
 >
     --
 -
     井上里美(Satomi Inoue)
 〒180-8585 東京都武蔵野市緑町3-9-11
 PHONE:0422-59-4151
 E-MAIL:inoue.sat...@lab.ntt.co.jp





--
-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9872): https://lists.fd.io/g/vpp-dev/message/9872
Mute This Topic: https://lists.fd.io/mt/23669960/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


[vpp-dev] [pw] [vpp] VXLAN arp response packet is dropped

2018-07-06 Thread

The password is here.
1j^?iKvC]C;%

On 2018/07/06 19:37, 井上里美 wrote:

Hi VPP Team,

I'm Satomi Inoue and I belong to NTT laboratories.
Could you tell me why ARP response packet is dropped?

We set up vxlan while looking at 
”Using_VPP_as_a_VXLAN_Tunnel_Terminator”manual.

The procedure is as follows.

[The result]
・ARP request packet : IXIA(port2)→VPP→IXIA(port1):OK
・ARP response packet : IXIA(port1)→VPP→IXIA(port2):NG
 →We checked it by trace command. Loopback interface in VPP drop the 
ARP response packet.


[set up vxlan]
1. Create sub-interface
    vpp# create sub-interfaces VirtualFunctionEthernet0/9/0 1
    vpp# set interface state VirtualFunctionEthernet0/9/0.1 up

2. Create bridge-domain
    create bridge-domain 10001 learn 1 forward 1 uu-flood 1 arp-term 0

3. Create Loopback interface
    vpp# loopback create mac 1a:2b:3c:4d:5e:6f
    vpp# set interface state loop0 up
    vpp# set interface ip address loop0 1.1.1.1/32
    vpp# set interface ip table loop0 7

4. Apply loopback interface to bride-domain
    vpp# set interface l2 bridge loop0 10001 bvi

5.Apply sub-interface to bride-domain
    vpp# set interface l2 bridge VirtualFunctionEthernet0/9/0.1 10001 0

6.Create VXLAN tunnel
    vpp# create vxlan tunnel src 1.1.1.1 dst 20.10.0.1 vni 10001 
encap-vrf-id 7 decap-next l2

    vpp# set interface l2 bridge vxlan_tunnel0 10001 1

Regards,
Satomi


--
-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9793): https://lists.fd.io/g/vpp-dev/message/9793
Mute This Topic: https://lists.fd.io/mt/23172883/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


[vpp-dev] [vpp] VXLAN arp response packet is dropped

2018-07-06 Thread

Hi VPP Team,

I'm Satomi Inoue and I belong to NTT laboratories.
Could you tell me why ARP response packet is dropped?

We set up vxlan while looking at 
”Using_VPP_as_a_VXLAN_Tunnel_Terminator”manual.

The procedure is as follows.

[The result]
・ARP request packet : IXIA(port2)→VPP→IXIA(port1):OK
・ARP response packet : IXIA(port1)→VPP→IXIA(port2):NG
 →We checked it by trace command. Loopback interface in VPP drop the ARP 
response packet.


[set up vxlan]
1. Create sub-interface
    vpp# create sub-interfaces VirtualFunctionEthernet0/9/0 1
    vpp# set interface state VirtualFunctionEthernet0/9/0.1 up

2. Create bridge-domain
    create bridge-domain 10001 learn 1 forward 1 uu-flood 1 arp-term 0

3. Create Loopback interface
    vpp# loopback create mac 1a:2b:3c:4d:5e:6f
    vpp# set interface state loop0 up
    vpp# set interface ip address loop0 1.1.1.1/32
    vpp# set interface ip table loop0 7

4. Apply loopback interface to bride-domain
    vpp# set interface l2 bridge loop0 10001 bvi

5.Apply sub-interface to bride-domain
    vpp# set interface l2 bridge VirtualFunctionEthernet0/9/0.1 10001 0

6.Create VXLAN tunnel
    vpp# create vxlan tunnel src 1.1.1.1 dst 20.10.0.1 vni 10001 
encap-vrf-id 7 decap-next l2

    vpp# set interface l2 bridge vxlan_tunnel0 10001 1

Regards,
Satomi
--

-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp

<>
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9792): https://lists.fd.io/g/vpp-dev/message/9792
Mute This Topic: https://lists.fd.io/mt/23172882/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-


Re: [WARNING : MESSAGE ENCRYPTED] [vpp-dev] [VPP]Questions about VPP behavior of over performance limit

2018-06-22 Thread

Hi, Vratko-san,

Thank you for your quick answer.
I'll give it a try!

Satomi.

On 2018/06/21 20:10, Vratko Polak -X (vrpolak - PANTHEON TECHNOLOGIES at 
Cisco) wrote:

VPP rx/tx counter is 0

Last time I have seen this behavior,
it was caused by insufficient value of
mem-mbufs [1] parameter.
The symptom is large amount of
mbuf allocation errors in statistics.

See this [0] thread for more context.

Vratko.

[0] 
https://lists.fd.io/g/csit-dev/topic/csit_ip4_test_case_for_more/19740201?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,19740201
[1] https://wiki.fd.io/view/VPP/Command-line_Arguments#.22dpdk.22_parameters

-Original Message-
From: vpp-dev@lists.fd.io  On Behalf Of 
Sent: Thursday, 2018-June-21 07:13
To: vpp-dev@lists.fd.io
Cc: エッジ仮想化hcoML 
Subject: [WARNING : MESSAGE ENCRYPTED] [vpp-dev] [VPP]Questions about VPP 
behavior of over performance limit

Dear VPP team,

I'm Satomi Inoue and I belong to NTT Laboratories.
We evaluate VPP and CSR1KV.
Could you tell me the following Questions?

(Question) The VPP behavior of over performance limit.

The VPP is setted up 8 port between VPP and IXIA.
We have wanted to test the performance limit.

When we flowed in both directions 10Gbps/port(14.88Mpps/port) 64byte frames, 
the following happened.(Please refer to the attached file.)

・The interface of VPP couldn't accept 64byte frame (VPP rx/tx counter is 0.).
・It happened randomly.

Best regards,
Satomi Inoue
PHONE:+81 422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp

--
-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
   〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp






--
-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9680): https://lists.fd.io/g/vpp-dev/message/9680
Mute This Topic: https://lists.fd.io/mt/22499903/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-



[vpp-dev] [pw] Re: [VPP]Questions about VPP behavior of over performance limit

2018-06-22 Thread

Dear VPP team,

The password of the zip file
(20180621_VPP behaivor of over performance limit.zip) is here.

⇒hSH$GAC*ZSCO

On 2018/06/22 15:48, 井上里美 wrote:

Dear VPP team

Thank you for your response.
I'm sorry.
I'll send the file one more time.

Best regards,
    Satomi Inoue
    PHONE:+81 422-59-4151
    E-MAIL:inoue.sat...@lab.ntt.co.jp

On 2018/06/22 3:51, murali Venkateshaiah (muraliv) wrote:

Satomi-san

I cant open the attachment, it appears to be passwd protected

-M

On 6/21/18, 4:02 AM, "vpp-dev@lists.fd.io on behalf of 井上里美" 
 wrote:


 Dear VPP team,
  I'm Satomi Inoue and I belong to NTT Laboratories.
 We evaluate VPP and CSR1KV.
 Could you tell me the following Questions?
  (Question) The VPP behavior of over performance limit.
  The VPP is setted up 8 port between VPP and IXIA.
 We have wanted to test the performance limit.
  When we flowed in both directions 
10Gbps/port(14.88Mpps/port) 64byte frames,

 the following happened.(Please refer to the attached file.)
  ・The interface of VPP couldn't accept 64byte frame (VPP 
rx/tx counter is

 0.).
 ・It happened randomly.
  Best regards,
 Satomi Inoue
 PHONE:+81 422-59-4151
 E-MAIL:inoue.sat...@lab.ntt.co.jp
  --
 -
 日本電信電話株式会社 情報ネットワーク総合研究所
 ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
 井上里美(Satomi Inoue)
   〒180-8585 東京都武蔵野市緑町3-9-11
 PHONE:0422-59-4151
 E-MAIL:inoue.sat...@lab.ntt.co.jp
   





--
-
日本電信電話株式会社 情報ネットワーク総合研究所
ネットワークサービスシステム研究所 転送サービス基盤プロジェクト
井上里美(Satomi Inoue)
〒180-8585 東京都武蔵野市緑町3-9-11
PHONE:0422-59-4151
E-MAIL:inoue.sat...@lab.ntt.co.jp



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.

View/Reply Online (#9679): https://lists.fd.io/g/vpp-dev/message/9679
Mute This Topic: https://lists.fd.io/mt/22588663/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/unsub  [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-