Re: [vpp-dev] How to enable RSS in VPP
No I was not because I was testing VPP bridging. After enabling more flows I could see multiple queues receiving traffic. Thanks Dave. -Nitin From: Dave Barach (dbarach) <dbar...@cisco.com> Sent: Tuesday, November 28, 2017 10:21 PM To: Saxena, Nitin; vpp-dev@lists.fd.io Cc: Athreya, Narayana Prasad Subject: RE: How to enable RSS in VPP You are sending traffic with more than one flow, correct? From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Saxena, Nitin Sent: Tuesday, November 28, 2017 11:45 AM To: vpp-dev@lists.fd.io Cc: Athreya, Narayana Prasad <narayanaprasad.athr...@cavium.com> Subject: [vpp-dev] How to enable RSS in VPP HI, I am using ConnectX-4 NIC which has Rx RSS support however I can see VPP is not using RSS feature with this NIC. NIC is getting traffic from 1 queue only? Is this can be fixed in VPP? If yes how? Output from show hardware detail == UnknownEthernet32/0/0 1 up UnknownEthernet32/0/0 Ethernet address 24:8a:07:a4:6b:78 Mellanox ConnectX-4 Family carrier up full duplex speed 4 mtu 9216 promisc pci id:device 15b3:1013 subsystem 15b3:0008 pci address: :32:00.00 max rx packet len: 65536 max num of queues: rx 65535 tx 65535 promiscuous: unicast on all-multicast on vlan offload: strip off filter off qinq off rx offload caps: vlan-strip ipv4-cksum udp-cksum tcp-cksum tx offload caps: vlan-insert ipv4-cksum udp-cksum tcp-cksum outer-ipv4-cksum rss active:ipv4-udp rss supported: none rx queues 4, rx desc 1024, tx queues 5, tx desc 1024 cpu socket 0 tx frames ok 31003987272 tx bytes ok1860239236320 rx frames ok 63884415232 rx bytes ok3833064913920 extended stats: rx good packets63884415232 tx good packets31003987272 rx good bytes3833064913920 tx good bytes1860239236320 rx errors0 tx errors0 rx mbuf allocation errors0 rx q0packets 0 rx q0bytes 0 rx q0errors 0 rx q1packets 0 rx q1bytes 0 rx q1errors 0 rx q2packets 0 rx q2bytes 0 rx q2errors 0 rx q3packets 63884415232 rx q3bytes 3833064913920 rx q3errors 0 tx q0packets 0 tx q0bytes 0 tx q1packets 31003987272 tx q1bytes 1860239236320 tx q2packets 0 tx q2bytes 0 tx q3packets 0 tx q3bytes 0 tx q4packets 0 tx q4bytes 0 Regards, Nitin ___ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
Re: [vpp-dev] How to enable RSS in VPP
You are sending traffic with more than one flow, correct? From: vpp-dev-boun...@lists.fd.io [mailto:vpp-dev-boun...@lists.fd.io] On Behalf Of Saxena, Nitin Sent: Tuesday, November 28, 2017 11:45 AM To: vpp-dev@lists.fd.io Cc: Athreya, Narayana Prasad <narayanaprasad.athr...@cavium.com> Subject: [vpp-dev] How to enable RSS in VPP HI, I am using ConnectX-4 NIC which has Rx RSS support however I can see VPP is not using RSS feature with this NIC. NIC is getting traffic from 1 queue only? Is this can be fixed in VPP? If yes how? Output from show hardware detail == UnknownEthernet32/0/0 1 up UnknownEthernet32/0/0 Ethernet address 24:8a:07:a4:6b:78 Mellanox ConnectX-4 Family carrier up full duplex speed 4 mtu 9216 promisc pci id:device 15b3:1013 subsystem 15b3:0008 pci address: :32:00.00 max rx packet len: 65536 max num of queues: rx 65535 tx 65535 promiscuous: unicast on all-multicast on vlan offload: strip off filter off qinq off rx offload caps: vlan-strip ipv4-cksum udp-cksum tcp-cksum tx offload caps: vlan-insert ipv4-cksum udp-cksum tcp-cksum outer-ipv4-cksum rss active:ipv4-udp rss supported: none rx queues 4, rx desc 1024, tx queues 5, tx desc 1024 cpu socket 0 tx frames ok 31003987272 tx bytes ok1860239236320 rx frames ok 63884415232 rx bytes ok3833064913920 extended stats: rx good packets63884415232 tx good packets31003987272 rx good bytes3833064913920 tx good bytes1860239236320 rx errors0 tx errors0 rx mbuf allocation errors0 rx q0packets 0 rx q0bytes 0 rx q0errors 0 rx q1packets 0 rx q1bytes 0 rx q1errors 0 rx q2packets 0 rx q2bytes 0 rx q2errors 0 rx q3packets 63884415232 rx q3bytes 3833064913920 rx q3errors 0 tx q0packets 0 tx q0bytes 0 tx q1packets 31003987272 tx q1bytes 1860239236320 tx q2packets 0 tx q2bytes 0 tx q3packets 0 tx q3bytes 0 tx q4packets 0 tx q4bytes 0 Regards, Nitin ___ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
[vpp-dev] How to enable RSS in VPP
HI, I am using ConnectX-4 NIC which has Rx RSS support however I can see VPP is not using RSS feature with this NIC. NIC is getting traffic from 1 queue only? Is this can be fixed in VPP? If yes how? Output from show hardware detail == UnknownEthernet32/0/0 1 up UnknownEthernet32/0/0 Ethernet address 24:8a:07:a4:6b:78 Mellanox ConnectX-4 Family carrier up full duplex speed 4 mtu 9216 promisc pci id:device 15b3:1013 subsystem 15b3:0008 pci address: :32:00.00 max rx packet len: 65536 max num of queues: rx 65535 tx 65535 promiscuous: unicast on all-multicast on vlan offload: strip off filter off qinq off rx offload caps: vlan-strip ipv4-cksum udp-cksum tcp-cksum tx offload caps: vlan-insert ipv4-cksum udp-cksum tcp-cksum outer-ipv4-cksum rss active:ipv4-udp rss supported: none rx queues 4, rx desc 1024, tx queues 5, tx desc 1024 cpu socket 0 tx frames ok 31003987272 tx bytes ok1860239236320 rx frames ok 63884415232 rx bytes ok3833064913920 extended stats: rx good packets63884415232 tx good packets31003987272 rx good bytes3833064913920 tx good bytes1860239236320 rx errors0 tx errors0 rx mbuf allocation errors0 rx q0packets 0 rx q0bytes 0 rx q0errors 0 rx q1packets 0 rx q1bytes 0 rx q1errors 0 rx q2packets 0 rx q2bytes 0 rx q2errors 0 rx q3packets 63884415232 rx q3bytes 3833064913920 rx q3errors 0 tx q0packets 0 tx q0bytes 0 tx q1packets 31003987272 tx q1bytes 1860239236320 tx q2packets 0 tx q2bytes 0 tx q3packets 0 tx q3bytes 0 tx q4packets 0 tx q4bytes 0 Regards, Nitin ___ vpp-dev mailing list vpp-dev@lists.fd.io https://lists.fd.io/mailman/listinfo/vpp-dev
