Re: [vpp-dev] vpp vpp v22.10-rc0~177-g563d34ba9 lcp create unknown input `' problem

2022-09-09 Thread Pim van Pelt 
Hoi Pawel,

On Fri, Sep 9, 2022 at 2:12 AM Paweł Staszewski 
wrote:

> Currently i stuct with other thing - can't configure more than one sub
> interface as vlan all because after configuring one vlan second one always
> has error:
>
> vpp# create sub BondEthernet0 4070
> BondEthernet0.4070
> vpp# lcp create BondEthernet0.4070 host-if be0.4070
> lcp create: lcp pair creation failed (-73)
>
To create a sub-interface in LCP, you must also create its parent, in your
case:
vpp# lcp create BondEthernet0 host-if be0
vpp# create sub BondEthernet0 4070
vpp# lcp create BondEthernet0.4070 host-if be0.4070

Incidentally, VPP can also auto-create the sub-interfaces in LCP, if you
wish. To enable this:
vpp# lcp lcp-auto-subint on

Then the second 'lcp create' above is not necessary. If you have 'lcp
lcp-auto-subint off' (the default), then you'll have to create LCP pairs
for each sub-interface. Another handy command is:
vpp# show lcp

Hope that helps,
Pim

-- 
Pim van Pelt 
PBVP1-RIPE - http://www.ipng.nl/

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#21865): https://lists.fd.io/g/vpp-dev/message/21865
Mute This Topic: https://lists.fd.io/mt/93536468/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

Re: [vpp-dev] vpp vpp v22.10-rc0~177-g563d34ba9 lcp create unknown input `' problem

2022-09-08 Thread Paweł Staszewski 
ok looks like I was typing it wrong... host-if is not host-if it is some 
if :)




Currently i stuct with other thing - can't configure more than one sub 
interface as vlan all because after configuring one vlan second one 
always has error:


vpp# create sub BondEthernet0 4070
BondEthernet0.4070
vpp# lcp create BondEthernet0.4070 host-if be0.4070
lcp create: lcp pair creation failed (-73)
vpp# create sub m1rdma1 4070
m1rdma1.4070
vpp# lcp create m1rdma1.4070 host-if e1.4070
lcp create: lcp pair creation failed (-2)
vpp#


depends if on bond or ethernet there is -2 or -73 error

Below show int

vpp# show interface
  Name   Idx    State  MTU 
(L3/IP4/IP6/MPLS) Counter  Count
BondEthernet0 5  up 1500/0/0/0 rx 
packets    178335
    rx 
bytes    17330109
    tx 
packets  1283
    tx 
bytes  100691

drops 173937
tx-error   1
BondEthernet0.2846    7  up 1500/0/0/0 rx 
packets  9234
    rx 
bytes 5108541
    tx 
packets  1274
    tx 
bytes   99705

drops   5676
ip4 3553
BondEthernet0.4070    9 down 1500/0/0/0
local0    0 down 0/0/0/0
loop0 1  up 9000/0/0/0 tx 
packets    20
    tx 
bytes    2464

drops 10
ip6   10
m0rdma0   4  up 1500/0/0/0 rx 
packets 94762
    rx 
bytes 6814573
    tx 
packets    22
    tx 
bytes    2648

drops    424
m1rdma1   3  up 1500/0/0/0 rx 
packets 83573
    rx 
bytes    10515536
    tx 
packets  1288
    tx 
bytes  101521

drops    425
m1rdma1.4070  11    down 0/0/0/0
tap1  2  up 9000/0/0/0 rx 
packets 8
    rx 
bytes 952

ip6    8
tap5  6  up 1500/0/0/0 rx 
packets   962
    rx 
bytes   68107
    tx 
packets  3242
    tx 
bytes 4701759

drops  1
ip6    9
tap5.2846 8  up 1500/0/0/0 rx 
packets   953
    rx 
bytes   67141
    tx 
packets  3242
    tx 
bytes 4701759

ip4  942
ip6    7
tap5.4070 10 up 1500/0/0/0


On 9/8/22 10:20 PM, Paweł Staszewski wrote:


Hi


So here is output of show int and int creation of rdma mellanox nic

ip a
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN 
group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: ens2f0np0:  mtu 1500 qdisc mq 
state DOWN group default qlen 1000

    link/ether 04:3f:72:dc:36:9c brd ff:ff:ff:ff:ff:ff
    altname enp101s0f0np0
3: ens2f1np1:  mtu 1500 qdisc mq 
state DOWN group default qlen 1000

    link/ether 04:3f:72:dc:36:9d brd ff:ff:ff:ff:ff:ff
    altname enp101s0f1np1
4: ens1f0np0:  mtu 1500 qdisc mq 
state UP group default qlen 1000

    link/ether 04:3f:72:dc:1e:84 brd ff:ff:ff:ff:ff:ff
 

Re: [vpp-dev] vpp vpp v22.10-rc0~177-g563d34ba9 lcp create unknown input `' problem

2022-09-08 Thread Paweł Staszewski 

Hi


So here is output of show int and int creation of rdma mellanox nic

ip a
1: lo:  mtu 65536 qdisc noqueue state UNKNOWN 
group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
   valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: ens2f0np0:  mtu 1500 qdisc mq 
state DOWN group default qlen 1000

    link/ether 04:3f:72:dc:36:9c brd ff:ff:ff:ff:ff:ff
    altname enp101s0f0np0
3: ens2f1np1:  mtu 1500 qdisc mq 
state DOWN group default qlen 1000

    link/ether 04:3f:72:dc:36:9d brd ff:ff:ff:ff:ff:ff
    altname enp101s0f1np1
4: ens1f0np0:  mtu 1500 qdisc mq state 
UP group default qlen 1000

    link/ether 04:3f:72:dc:1e:84 brd ff:ff:ff:ff:ff:ff
    altname enp179s0f0np0
    inet6 fe80::63f:72ff:fedc:1e84/64 scope link
   valid_lft forever preferred_lft forever
5: ens1f1np1:  mtu 1500 qdisc mq state 
UP group default qlen 1000

    link/ether 04:3f:72:dc:1e:85 brd ff:ff:ff:ff:ff:ff
    altname enp179s0f1np1
    inet6 fe80::63f:72ff:fedc:1e85/64 scope link
   valid_lft forever preferred_lft forever

Create rdma interface:

vppctl create int rdma host-if ens1f1np1 name rdma-1

Show int from vpp:

vppctl show int
  Name   Idx    State  MTU 
(L3/IP4/IP6/MPLS) Counter  Count

local0    0 down 0/0/0/0
loop0 1  up 9000/0/0/0 tx 
packets    18
    tx 
bytes    2164

drops  9
ip6    9
rdma-1    3 down 9000/0/0/0
tap1  2  up 9000/0/0/0 rx 
packets 8
    rx 
bytes 952

ip6    8


And some lcp create commands that fails

~/src/vpp# vppctl lcp create M1 host-if e1
lcp create: unknown input `'
~/src/vpp# vppctl lcp create M1 host-if rdma-1
lcp create: unknown input `'
~/src/vpp#




On 9/8/22 3:03 PM, Matthew Smith via lists.fd.io wrote:

Hi,

The help text can be displayed with '?' rather than 'help':
vpp# lcp create ?
  lcp create                               lcp create 
| host-if  netns  [tun]


When you ran 'lcp create 1', you got a different error message than 
you did with the rest of your commands. That suggests that 1 is a 
valid sw_if_index. The command 'lcp create 1 host-if ens1f1np1' may 
work. Since you got an error when you tried other commands using 'e0', 
e0 is probably not a valid interface in your VPP instance. What 
interfaces are displayed by 'show interface'?


Thanks,
-Matt


On Wed, Sep 7, 2022 at 5:32 PM Paweł Staszewski > wrote:


Hi


Was trying linux-cp vpp and the problem is that i cant create any
interface with lcp because any command is like this:

vpp# lcp create
vpp# lcp create help
lcp create: unknown input `'
vpp# lcp create default
lcp create: unknown input `'
vpp# lcp create
vpp# lcp create1
lcp: unknown input `create1'
vpp# lcp create
vpp# lcp create  1
lcp create: host interface name required
vpp# lcp create  e0 host-if ens1f1np1
lcp create: unknown input `'
vpp# lcp create  e0 host-if
lcp create: unknown input `'
vpp# lcp create  e0 host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create "e0"
lcp create: unknown input `'
vpp# lcp create 'e0'
lcp create: unknown input `'
vpp# lcp create 'e0' host-if 'abc'
lcp create: unknown input `'
vpp# lcp create  e0 host-if ens1f1np1
lcp create: unknown input `'








--
Paweł Staszewski
CEO at ITCare

Cell:+48 609911040
pstaszew...@itcare.pl

This message (including any attachments) contains confidential information 
intended
for a specific individual and purpose, and is protected by law.  If you are not 
the
intended recipient, you should delete this message.  Any disclosure, copying, or
distribution of this message, or the taking of any action based on it, is 
strictly
prohibited.

-

Wiadomość ta jest przeznaczona jedynie dla osoby lub podmiotu będącego jej 
adresatem i
może zawierać poufne lub uprzywilejowane informacje. Zakazane jest przeglądanie,
przesyłanie, rozpowszechnianie lub inne wykorzystywanie tych informacji, jak 
również
podejmowanie działań na ich podstawie, przez osoby lub podmioty inne niż 
zamierzony
adresat. Jeśli otrzymali Państwo tę wiadomość przez pomyłkę, prosimy o 
poinformowanie
nadawcy i usunięcie jej z komputera.

Re: [vpp-dev] vpp vpp v22.10-rc0~177-g563d34ba9 lcp create unknown input `' problem

2022-09-08 Thread Matthew Smith via lists.fd.io 
Hi,

The help text can be displayed with '?' rather than 'help':
vpp# lcp create ?
  lcp create   lcp create
| host-if  netns  [tun]

When you ran 'lcp create 1', you got a different error message than you did
with the rest of your commands. That suggests that 1 is a valid
sw_if_index. The command 'lcp create 1 host-if ens1f1np1' may work. Since
you got an error when you tried other commands using 'e0', e0 is probably
not a valid interface in your VPP instance. What interfaces are displayed
by 'show interface'?

Thanks,
-Matt


On Wed, Sep 7, 2022 at 5:32 PM Paweł Staszewski 
wrote:

> Hi
>
>
> Was trying linux-cp vpp and the problem is that i cant create any
> interface with lcp because any command is like this:
>
> vpp# lcp create
> vpp# lcp create help
> lcp create: unknown input `'
> vpp# lcp create default
> lcp create: unknown input `'
> vpp# lcp create
> vpp# lcp create1
> lcp: unknown input `create1'
> vpp# lcp create
> vpp# lcp create  1
> lcp create: host interface name required
> vpp# lcp create  e0 host-if ens1f1np1
> lcp create: unknown input `'
> vpp# lcp create  e0 host-if
> lcp create: unknown input `'
> vpp# lcp create  e0 host-if
> lcp create: unknown input `'
> vpp# lcp create  e0  host-if
> lcp create: unknown input `'
> vpp# lcp create  e0  host-if
> lcp create: unknown input `'
> vpp# lcp create  e0  host-if
> lcp create: unknown input `'
> vpp# lcp create "e0"
> lcp create: unknown input `'
> vpp# lcp create 'e0'
> lcp create: unknown input `'
> vpp# lcp create 'e0' host-if 'abc'
> lcp create: unknown input `'
> vpp# lcp create  e0 host-if ens1f1np1
> lcp create: unknown input `'
>
>
> 
>
>

-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#21861): https://lists.fd.io/g/vpp-dev/message/21861
Mute This Topic: https://lists.fd.io/mt/93536468/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-

[vpp-dev] vpp vpp v22.10-rc0~177-g563d34ba9 lcp create unknown input `' problem

2022-09-07 Thread Paweł Staszewski 

Hi


Was trying linux-cp vpp and the problem is that i cant create any 
interface with lcp because any command is like this:


vpp# lcp create
vpp# lcp create help
lcp create: unknown input `'
vpp# lcp create default
lcp create: unknown input `'
vpp# lcp create
vpp# lcp create1
lcp: unknown input `create1'
vpp# lcp create
vpp# lcp create  1
lcp create: host interface name required
vpp# lcp create  e0 host-if ens1f1np1
lcp create: unknown input `'
vpp# lcp create  e0 host-if
lcp create: unknown input `'
vpp# lcp create  e0 host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create  e0  host-if
lcp create: unknown input `'
vpp# lcp create "e0"
lcp create: unknown input `'
vpp# lcp create 'e0'
lcp create: unknown input `'
vpp# lcp create 'e0' host-if 'abc'
lcp create: unknown input `'
vpp# lcp create  e0 host-if ens1f1np1
lcp create: unknown input `'


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#21860): https://lists.fd.io/g/vpp-dev/message/21860
Mute This Topic: https://lists.fd.io/mt/93536468/21656
Group Owner: vpp-dev+ow...@lists.fd.io
Unsubscribe: https://lists.fd.io/g/vpp-dev/leave/1480452/21656/631435203/xyzzy 
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-