[weewx-user] Re: Where do I download skins?

[Greg from Oz]

This is the one I use:
https://github.com/weewx/weewx/wiki/responsive


On Sunday, 15 April 2018 04:56:33 UTC+10, Praveen Chandrasekaran wrote:
>
> Hi,
>
> I see various skins being used by everyone here:
>
> http://www.weewx.com/showcase.html
>
> Where do I download these skins? 
>
> Regards,
> Praveen
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: FINE OFFSET WH2900 / Ambient Weather WS-2902

[Andy Kerekes]

Hello Thomas!!!

I see you are using an Ambient 2902 as I. I can not for the life of me get 
my 2902 to work with weewx. Is there a tread where I can find detailed info 
on getting this ws-2902 to work off the console or any method?

I get the same on my -tail -f /var/log/syslog as kan6526 above.

Andy

On Thursday, May 25, 2017 at 10:20:07 PM UTC-5, Thomas Keffer wrote:
>
> In addition to Gary's suggestions, I would add one more: your disk may be 
> failing.
>
> -tk
>
> On Thu, May 25, 2017 at 4:20 PM, gjr80  
> wrote:
>
>> Hi,
>>
>> This is likely why you are seeing the error message:
>>
>> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 14 
>>> files for report StandardReport in 1038.33 seconds
>>>
>>
>> 1038 seconds is roughly 17 minutes. I don't know what your archive 
>> interval is but if it is anything less than 20 minutes this would cause 
>> problems. The report cycle is triggered at the end of an archive period and 
>> each report cycle is run in its own thread. If a new report thread is 
>> created before the old one is complete then you will run into the sort of 
>> errors you see above - ie files the old thread is expecting to use no 
>> longer exist because the new report thread has taken over. If this is a 
>> one-off situation things will come good after an archive period or 2, but 
>> if it is an ongoing problem your report threads will not generate (some or 
>> all) reports and what you will see are your pages not being updated.
>>
>> A few things to look at:
>> 1. What is your archive period? You should see it mentioned explicitly in 
>> the log when weeWX starts. If its less than 5 minutes then it is possible 
>> you are asking weeWX to do too much (ie generate too many or too complex 
>> reports).
>> 2. What skins are you running? Just the Standard skin or some others? If 
>> your PC cannot generate all of the reports in each skin within an archive 
>> period you will experience the problem you describe.
>> 3. Is the error you posted above happening regularly, ie every archive 
>> period, or just now and then. If now and then it may be a case of something 
>> else loading your PC causing weeWX to be unable to complete reports in a 
>> timely manner. If it's occurring regularly then you may be 'overloading' 
>> weeWX.
>>
>> Gary
>>
>> On Friday, 26 May 2017 01:45:26 UTC+10, kan6526 wrote:
>>>
>>>
>>> WeeWX generates HTML pages, but it does not update them
>>>
>>>
>>> ---stop weewx 
>>>  
>>> msg
>>>  weewx[7366]: interceptor: MainThread: unrecognized parameter 
>>> absbaromin=29.78
>>>
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]: File 
>>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 330, in generate
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]:   os.rename(tmpname, 
>>> _fullname)
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]:   OSError: [Errno 2] 沒有此一檔案或目錄
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 14 
>>> files for report StandardReport in 1038.33 seconds
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]:   Traceback (most recent call 
>>> last):
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]: File 
>>> "/usr/share/weewx/weewx/cheetahgenerator.py", line 330, in generate
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]:   os.rename(tmpname, 
>>> _fullname)
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]:   OSError: [Errno 2] 沒有此一檔案或目錄
>>> May 25 23:37:01 GA-8IEXRR weewx[7366]: cheetahgenerator: Generated 7 
>>> files for report StandardReport in 270.15 seconds
>>> May 25 23:37:03 GA-8IEXRR weewx[7366]: imagegenerator: Generated 12 
>>> images for StandardReport in 1.29 seconds
>>> May 25 23:37:03 GA-8IEXRR weewx[7366]: copygenerator: copied 0 files to 
>>> /var/www/weewx
>>> May 25 23:37:03 GA-8IEXRR weewx[7366]: imagegenerator: Generated 12 
>>> images for StandardReport in 1.30 seconds
>>> May 25 23:37:03 GA-8IEXRR weewx[7366]: copygenerator: copied 9 files to 
>>> /var/www/weewx
>>>
>>>  --weewx start msg --
>>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Initializing weewx 
>>> version 3.7.1
>>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Using Python 2.6.6 
>>> (r266:84292, Dec 27 2010, 00:02:40) #012[GCC 4.4.5]
>>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Platform 
>>> Linux-2.6.32-5-686-i686-with-debian-6.0.10
>>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: Locale is 'zh_TW.UTF-8'
>>> May 25 23:43:35 GA-8IEXRR weewx[7638]: engine: pid file is 
>>> /var/run/weewx.pid
>>> May 25 23:43:35 GA-8IEXRR weewx[7643]: engine: Using configuration file 
>>> /etc/weewx/weewx.conf
>>> May 25 23:43:35 GA-8IEXRR weewx[7643]: engine: Loading station type 
>>> Interceptor (user.interceptor)
>>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: driver 
>>> version is 0.30
>>> May 25 23:43:35 GA-8IEXRR weewx[7643]: interceptor: MainThread: device 

Re: [weewx-user] Re: Steel Guages and driver update question

[Steve2Q]

Hi Gary..I did the upgrade to 3.8.0 and so far all is well. I will have to 
check the clock on my console (Peet Bros Ultimeter) after 24 hours or so to 
see if the autocorrection in the driver is working. Up till now, I have 
been using an older version of the Ultimeter driver as the newer ones did 
not update the clock. Lets see if the one included with the upgrade works.

Next I have to start reading up on how to include some forecasts. I did try 
to put WU on the Steel Gauges scrolling banner, but that did not work 
possibly because; a. I had to do more than just set enable = true under 
[[WU]] in weewx.conf and/or b. WU is not accepting my API.

Thanks again,  Steve

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Cydia pomonella

[CRhode]

I'm sorry.  I don't really speak German.  I mistook the word "zurück" for "
Zürich."

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Cydia pomonella

[CRhode]

>
>  finally have a look at http://wetter.hes61.de/index1.html the y-scale is 
> degree_C


Vielen Dank!  I'm thrilled that the Centigrade conversion works.  Is your 
C_pomonella.html automatic?

I'm surprised you grow apples in Zurich because of the altitude.  Does your 
codling moth forecast match the university predictions there?  -ccr-

>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: WU API ?

[John Patrick Hoke]

According to the WU support thread the free tier is gone (no new signups)
and existing will go away at some point



On Sat, May 19, 2018 at 12:05 AM Craig Thom  wrote:

> The free API key is good for a maximum of 10 calls per minute and 500 per
> day.  That's not enough for commercial use, or at least commercial use that
> could justify paying for a higher tier.
>
> On Friday, May 18, 2018 at 4:01:56 AM UTC-4, Andrew Milner wrote:
>>
>> I shall wait and see.  I would expect them to continue to allow use of
>> api for your own weather station, but I can understand the reasons for
>> limitations (as there always have been) on the uses which used to be part
>> of other plans.  I am sure there are many 'users' who are really commercial
>> who are ripping off WU with there requests for data and trying to get the
>> data for free when they shouldn't be.
>>
>> So I'm not panicking just yet
>>
>>
>>
>> On Friday, 18 May 2018 10:49:36 UTC+3, gjr80 wrote:
>>>
>>> Andrew,
>>>
>>> You need to log out of WU, for non-WU user that page was the entry into
>>> the WU API, for logged in WU users it takes you to your analytics page. The
>>> non-WU users it now gives a blurb about The Weather Company 'series of data
>>> packages'. They are light on detail and whilst the don't indicate they are
>>> paid for they certainly don't indicate they are free either.
>>>
>>> Other links of interest:
>>>
>>> The wxforum.net thread:  http://www.wxforum.net/index.php?topic=34403.0
>>>
>>> Thread in WU API Community forum:
>>> https://apicommunity.wunderground.com/weatherapi/topics/weather-underground-api-changes
>>>
>>> See there is something in the API community thread about the smallest
>>> data package being $850 per month.
>>>
>>>
>>> Gary
>>>
>>> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.
>
-- 
John P. Hoke
j...@hoke.org
https://hoke.org/john /
Random Non-Sequiturs & Photography

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [weewx-user] Re: Realtime updates for custom display

[mwall]

bruce,

you could do this using weewx, influxdb, and grafana.

use the weewx-influx extension to send data to an influxdb server.  set 
weewx-influx to send loop data, not just archive data.

then display the data from influx using grafana

you will see data as soon as the airmar sends it

no programming required, but you do have to install and configure influxdb 
and grafana.  both of those are really easy now (they have come a long way 
in the past two years).

m 

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Ambient WS-2902

[Andy Kerekes]

Hello!!!

Can someone please point me to the correct area or post. I installed weewx 
on a raspberry pi 3 and all seemed to install correctly until I came to the 
driver. I do not have a USB setup instead I have an Ambient ObserverIP and 
a meteobridge running a meteotemplate v17 setup correctly at 
www.nicomaparkweather.com but am really interested in running the weewx 
setup also. I am somewhat confused on the setup and do not see an option 
for my ws-2902 but as far as I can tell the WH2900 is the same. Is there a 
forum showing this particular setup that anyone has run across? I have 
searched these user groups and have not fount this particular setup.

Andy

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.