Re: [weewx-user] Installation issues on Synology DS918+ -- No module named configobj

[Ivan Schrooyen]

Hello,

Thanks for your fast answer.

I have actually run all installation as root user.
In order to do that on Synology, I had to issue the command "sudo -i" 
before hand.

In any case, I have tried both options mentioned in your last post a couple 
of seconds ago, and I am still stuck with the same error message.

Is there anything else you recommend me to try?

Thanks in advance,
Ivan 

>  
>>
> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "weewx-user" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to weewx...@googlegroups.com .
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/weewx-user/378728d5-fe58-4bdc-acb6-102dcbeac6fe%40googlegroups.com
>>  
>> 
>> .
>>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/d8fa1e74-11f1-4068-9128-e9aa5fa19898%40googlegroups.com.

Re: [weewx-user] Installation issues on Synology DS918+ -- No module named configobj

[Thomas Keffer]

Because you installed configobj using pip, but *without root privileges*,
pip did what's called a "user" install. Because "sudo" was not specified,
it could not install configobj in the system directories, so, instead, it
installed in a subdirectory (usually ".local") of your home directory.

Then, when you ran setup.py, it either used a different version of python,
or it used the wrong PYTHONPATH.

There are two possible solutions:

   1. Do the pip installs using "sudo". E.g., "sudo python2 -m pip install
   configobj"
   2. Use the same version of Python when running setup.py:

*python2 setup.py build*

See if that helps.

-tk

On Wed, Mar 18, 2020 at 5:21 AM Ivan Schrooyen 
wrote:

> Hello,
>
> I would like to become a new user of Weewx and install it on my Synology
> NAS (DS918+).
>
> The NAS is running the latest OS from Synology: DSM 6.2.2-24922.
>
> The installation procedure to be followed is according to me the one with
> python.
>
> The NAS has 2 versions of python installed: 2.7.12 (python2) and 3.5.1
> (python3).
>
> I have done the prerequisites:
> - python2 -m pip install configobj
> - python2 -m pip install Cheetah
> - python2 -m pip install pillow
> - python2 -m pip install pyserial
> - python2 -m pip install pyusb
>
> I have downloaded the package (3.9.2), then uncompressed, and I am finally
> stuck at the "./setup.py build" command that does not run.
>
> The error message is the following:
> root@NAS:~/weewx/weewx-3.9.2# ./setup.py build
> Traceback (most recent call last):
>   File "./setup.py", line 19, in 
> import configobj
> ImportError: No module named configobj
>
> For information, the installation of configobj returns the following:
> root@NAS:~/weewx/weewx-3.9.2# python2 -m pip install configobj
> DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020.
> Please upgrade your Python as Python 2.7 is no longer maintained. A future
> version of pip will drop support for Python 2.7. More details about Python
> 2 support in pip, can be found at
> https://pip.pypa.io/en/latest/development/release-process/#python-2-support
> Processing
> /root/.cache/pip/wheels/c1/12/7a/c676d85d30d1aa17f3882dab925a777ab1f651c4072cccefd7/configobj-5.0.6-py2-none-any.whl
> Requirement already satisfied: six in /usr/lib/python2.7/site-packages
> (from configobj) (1.12.0)
> Installing collected packages: configobj
> Successfully installed configobj-5.0.6
>
> Does anyone know what I should do or try?
>
> Thanks in advance,
> Ivan
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "weewx-user" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to weewx-user+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/weewx-user/378728d5-fe58-4bdc-acb6-102dcbeac6fe%40googlegroups.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/CAPq0zECzAAvrsf-g%3DWEjjuLiWuTru2Kd_eD-t_Z3HKfkagh9mQ%40mail.gmail.com.

[weewx-user] Installation issues on Synology DS918+ -- No module named configobj

[Ivan Schrooyen]

Hello,

I would like to become a new user of Weewx and install it on my Synology 
NAS (DS918+).

The NAS is running the latest OS from Synology: DSM 6.2.2-24922.

The installation procedure to be followed is according to me the one with 
python.

The NAS has 2 versions of python installed: 2.7.12 (python2) and 3.5.1 
(python3).

I have done the prerequisites: 
- python2 -m pip install configobj
- python2 -m pip install Cheetah
- python2 -m pip install pillow
- python2 -m pip install pyserial
- python2 -m pip install pyusb

I have downloaded the package (3.9.2), then uncompressed, and I am finally 
stuck at the "./setup.py build" command that does not run.

The error message is the following:
root@NAS:~/weewx/weewx-3.9.2# ./setup.py build
Traceback (most recent call last):
  File "./setup.py", line 19, in 
import configobj
ImportError: No module named configobj

For information, the installation of configobj returns the following:
root@NAS:~/weewx/weewx-3.9.2# python2 -m pip install configobj
DEPRECATION: Python 2.7 reached the end of its life on January 1st, 2020. 
Please upgrade your Python as Python 2.7 is no longer maintained. A future 
version of pip will drop support for Python 2.7. More details about Python 
2 support in pip, can be found at 
https://pip.pypa.io/en/latest/development/release-process/#python-2-support
Processing 
/root/.cache/pip/wheels/c1/12/7a/c676d85d30d1aa17f3882dab925a777ab1f651c4072cccefd7/configobj-5.0.6-py2-none-any.whl
Requirement already satisfied: six in /usr/lib/python2.7/site-packages 
(from configobj) (1.12.0)
Installing collected packages: configobj
Successfully installed configobj-5.0.6

Does anyone know what I should do or try?

Thanks in advance,
Ivan



-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/378728d5-fe58-4bdc-acb6-102dcbeac6fe%40googlegroups.com.