subject:"\[weewx\-user\] Re\: BME280 Sensor Missing Inside Temp Readings"

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-14 Thread wxwatching

Sorry for the late follow-up. I changed the "must_have" lines to "outTemp" 
and all is working as expected.

Thanks,
Anthony

On Sunday, August 8, 2021 at 7:35:57 PM UTC-4 Gazza wrote:

> I had a similar issue in July last year and it was discussed in these 
> threads:
> https://groups.google.com/g/weewx-user/c/-azmKGA3q_U/m/j8i9ih20BwAJ
> https://groups.google.com/g/weewx-user/c/MycfgX74P1Y
>
> The  "*_must_have" lines need to contain the value of a valid sensor for 
> the bme280 readings to be added to the loop data. In my setup I use 
> "outTemp" from my rtlsdr in all of these lines and it works fine.
>
>
> The other Gary
>
>
> On Monday, August 9, 2021 at 12:30:33 AM UTC+10 mksm...@gmail.com wrote:
>
>> can you try this
>>
>> [Bme280wx]
>> i2c_port = 1
>> i2c_address = 0x76
>> usUnits = US
>> pressureKeys = pressure
>> pressure_must_have = outTemp
>> humidityKeys = inHumidity
>> humidity_must_have = outTemp
>> temperatureKeys = inTemp
>> temperature_must_have = outTemp
>>
>> On Sunday, August 8, 2021 at 3:49:48 PM UTC+3 gjr80 wrote:
>>
>>> OK. Let's put a bit more logging in bme280wx.py, we'll just look at 
>>> pressure for now. Move aside your existing 
>>> /usr/share/weewx/user/bme280wx.py by renaming it as bme280wx_orig.py. 
>>> Download the attached bme280wx.py and save it in it's place in the /
>>> usr/share/weewx/user directory. Leave debug = 1 and restart WeeWX. Post 
>>> the log including WeeWX startup and the first half dozen loop packets.
>>>
>>> Gary
>>> On Sunday, 8 August 2021 at 21:47:36 UTC+10 wxwatching wrote:
>>>
 Ok, here's the current section from config file:

 [Engine]

 # The following section specifies which services should be run and 
 in what order.
 [[Services]]
 prep_services = weewx.engine.StdTimeSynch
 data_services = user.bme280wx.Bme280wx,
 process_services = weewx.engine.StdConvert, 
 weewx.engine.StdCalibrate, weewx.engine.StdQC, 
 weewx.wxservices.StdWXCalculate
 xtype_services = weewx.wxxtypes.StdWXXTypes, 
 weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, 
 weewx.wxxtypes.StdDelta
 archive_services = weewx.engine.StdArchive
 restful_services = weewx.restx.StdStationRegistry, 
 weewx.restx.StdWunderground, weewx.restx.StdPWSweather, 
 weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
 report_services = weewx.engine.StdPrint, weewx.engine.StdReport

 [Bme280wx]
 i2c_port = 1
 i2c_address = 0x76
 usUnits = US
 pressureKeys = pressure
 pressure_must_have = ""
 humidityKeys = inHumidity
 humidity_must_have = ""
 temperatureKeys = inTemp
 temperature_must_have = ""

 New problem now is that the loop apparently hangs and WeeWX quits 
 reporting weather data.

 sudo weewxd
 LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
 cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
 outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, 
 windchill: 
 70.6, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
 cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
 outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, 
 windchill: 
 70.6, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
 cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
 outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, 
 windchill: 
 70.6, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
 maxSolarRad: None, outTempBatteryStatus: 0, rain: None, rainRate: 0, 
 rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
 LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
 maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
>>>

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-08 Thread Gazza

I had a similar issue in July last year and it was discussed in these 
threads:
https://groups.google.com/g/weewx-user/c/-azmKGA3q_U/m/j8i9ih20BwAJ
https://groups.google.com/g/weewx-user/c/MycfgX74P1Y

The  "*_must_have" lines need to contain the value of a valid sensor for 
the bme280 readings to be added to the loop data. In my setup I use 
"outTemp" from my rtlsdr in all of these lines and it works fine.


The other Gary


On Monday, August 9, 2021 at 12:30:33 AM UTC+10 mksm...@gmail.com wrote:

> can you try this
>
> [Bme280wx]
> i2c_port = 1
> i2c_address = 0x76
> usUnits = US
> pressureKeys = pressure
> pressure_must_have = outTemp
> humidityKeys = inHumidity
> humidity_must_have = outTemp
> temperatureKeys = inTemp
> temperature_must_have = outTemp
>
> On Sunday, August 8, 2021 at 3:49:48 PM UTC+3 gjr80 wrote:
>
>> OK. Let's put a bit more logging in bme280wx.py, we'll just look at 
>> pressure for now. Move aside your existing 
>> /usr/share/weewx/user/bme280wx.py by renaming it as bme280wx_orig.py. 
>> Download the attached bme280wx.py and save it in it's place in the /
>> usr/share/weewx/user directory. Leave debug = 1 and restart WeeWX. Post 
>> the log including WeeWX startup and the first half dozen loop packets.
>>
>> Gary
>> On Sunday, 8 August 2021 at 21:47:36 UTC+10 wxwatching wrote:
>>
>>> Ok, here's the current section from config file:
>>>
>>> [Engine]
>>>
>>> # The following section specifies which services should be run and 
>>> in what order.
>>> [[Services]]
>>> prep_services = weewx.engine.StdTimeSynch
>>> data_services = user.bme280wx.Bme280wx,
>>> process_services = weewx.engine.StdConvert, 
>>> weewx.engine.StdCalibrate, weewx.engine.StdQC, 
>>> weewx.wxservices.StdWXCalculate
>>> xtype_services = weewx.wxxtypes.StdWXXTypes, 
>>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, 
>>> weewx.wxxtypes.StdDelta
>>> archive_services = weewx.engine.StdArchive
>>> restful_services = weewx.restx.StdStationRegistry, 
>>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, 
>>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>>
>>> [Bme280wx]
>>> i2c_port = 1
>>> i2c_address = 0x76
>>> usUnits = US
>>> pressureKeys = pressure
>>> pressure_must_have = ""
>>> humidityKeys = inHumidity
>>> humidity_must_have = ""
>>> temperatureKeys = inTemp
>>> temperature_must_have = ""
>>>
>>> New problem now is that the loop apparently hangs and WeeWX quits 
>>> reporting weather data.
>>>
>>> sudo weewxd
>>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>>> 70.6, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>>> 70.6, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>>> 70.6, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>>> maxSolarRad: None, outTempBatteryStatus: 0, rain: None, rainRate: 0, 
>>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>>> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
>>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>>> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
>>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>>>
>>> And the output from the syslog is:
>>>
>

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-08 Thread Mks Mk

can you try this

[Bme280wx]
i2c_port = 1
i2c_address = 0x76
usUnits = US
pressureKeys = pressure
pressure_must_have = outTemp
humidityKeys = inHumidity
humidity_must_have = outTemp
temperatureKeys = inTemp
temperature_must_have = outTemp

On Sunday, August 8, 2021 at 3:49:48 PM UTC+3 gjr80 wrote:

> OK. Let's put a bit more logging in bme280wx.py, we'll just look at 
> pressure for now. Move aside your existing 
> /usr/share/weewx/user/bme280wx.py by renaming it as bme280wx_orig.py. 
> Download the attached bme280wx.py and save it in it's place in the /
> usr/share/weewx/user directory. Leave debug = 1 and restart WeeWX. Post 
> the log including WeeWX startup and the first half dozen loop packets.
>
> Gary
> On Sunday, 8 August 2021 at 21:47:36 UTC+10 wxwatching wrote:
>
>> Ok, here's the current section from config file:
>>
>> [Engine]
>>
>> # The following section specifies which services should be run and in 
>> what order.
>> [[Services]]
>> prep_services = weewx.engine.StdTimeSynch
>> data_services = user.bme280wx.Bme280wx,
>> process_services = weewx.engine.StdConvert, 
>> weewx.engine.StdCalibrate, weewx.engine.StdQC, 
>> weewx.wxservices.StdWXCalculate
>> xtype_services = weewx.wxxtypes.StdWXXTypes, 
>> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, 
>> weewx.wxxtypes.StdDelta
>> archive_services = weewx.engine.StdArchive
>> restful_services = weewx.restx.StdStationRegistry, 
>> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, 
>> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
>> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>>
>> [Bme280wx]
>> i2c_port = 1
>> i2c_address = 0x76
>> usUnits = US
>> pressureKeys = pressure
>> pressure_must_have = ""
>> humidityKeys = inHumidity
>> humidity_must_have = ""
>> temperatureKeys = inTemp
>> temperature_must_have = ""
>>
>> New problem now is that the loop apparently hangs and WeeWX quits 
>> reporting weather data.
>>
>> sudo weewxd
>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
>> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
>> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>> 70.6, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>> 70.6, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
>> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
>> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
>> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
>> 70.6, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>> maxSolarRad: None, outTempBatteryStatus: 0, rain: None, rainRate: 0, 
>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
>> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
>> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>>
>> And the output from the syslog is:
>>
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Initializing weewx 
>> version 4.5.1
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using Python 
>> 2.7.16 (default, Oct 10 2019, 22:02:15) #012[GCC 8.3.0]
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Platform 
>> Linux-5.10.52-v7+-armv7l-with-debian-10.10
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Locale is 
>> 'en_US.UTF-8'
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using 
>> configuration file /etc/weewx/weewx.conf
>> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Debug is 1
>> Aug  8

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-08 Thread gjr80

OK. Let's put a bit more logging in bme280wx.py, we'll just look at 
pressure for now. Move aside your existing /usr/share/weewx/user/bme280wx.py 
by renaming it as bme280wx_orig.py. Download the attached bme280wx.py and 
save it in it's place in the /usr/share/weewx/user directory. Leave debug = 
1 and restart WeeWX. Post the log including WeeWX startup and the first 
half dozen loop packets.

Gary
On Sunday, 8 August 2021 at 21:47:36 UTC+10 wxwatching wrote:

> Ok, here's the current section from config file:
>
> [Engine]
>
> # The following section specifies which services should be run and in 
> what order.
> [[Services]]
> prep_services = weewx.engine.StdTimeSynch
> data_services = user.bme280wx.Bme280wx,
> process_services = weewx.engine.StdConvert, 
> weewx.engine.StdCalibrate, weewx.engine.StdQC, 
> weewx.wxservices.StdWXCalculate
> xtype_services = weewx.wxxtypes.StdWXXTypes, 
> weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, 
> weewx.wxxtypes.StdDelta
> archive_services = weewx.engine.StdArchive
> restful_services = weewx.restx.StdStationRegistry, 
> weewx.restx.StdWunderground, weewx.restx.StdPWSweather, 
> weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
> report_services = weewx.engine.StdPrint, weewx.engine.StdReport
>
> [Bme280wx]
> i2c_port = 1
> i2c_address = 0x76
> usUnits = US
> pressureKeys = pressure
> pressure_must_have = ""
> humidityKeys = inHumidity
> humidity_must_have = ""
> temperatureKeys = inTemp
> temperature_must_have = ""
>
> New problem now is that the loop apparently hangs and WeeWX quits 
> reporting weather data.
>
> sudo weewxd
> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
> 13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
> 106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
> 70.6, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
> 70.6, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
> cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
> 72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
> outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
> 70.6, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
> maxSolarRad: None, outTempBatteryStatus: 0, rain: None, rainRate: 0, 
> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
> LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
> maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
> rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
>
> And the output from the syslog is:
>
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Initializing weewx 
> version 4.5.1
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using Python 2.7.16 
> (default, Oct 10 2019, 22:02:15) #012[GCC 8.3.0]
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Platform 
> Linux-5.10.52-v7+-armv7l-with-debian-10.10
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Locale is 
> 'en_US.UTF-8'
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using configuration 
> file /etc/weewx/weewx.conf
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Debug is 1
> Aug  8 07:36:23 raspberrypi weewx[2566] DEBUG __main__: Initializing engine
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO weewx.engine: Loading station 
> type SDR (user.sdr)
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO user.sdr: driver version is 
> 0.78
> Aug  8 07:36:23 raspberrypi weewx[2566] INFO user.sdr: sensor map is 
> {u'outTempBatteryStatus': u'battery.0222.AcuriteAtlasPacket', u'outTemp': 
> u'temperature.0222.AcuriteAtlasPack

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-08 Thread wxwatching

Ok, here's the current section from config file:

[Engine]

# The following section specifies which services should be run and in 
what order.
[[Services]]
prep_services = weewx.engine.StdTimeSynch
data_services = user.bme280wx.Bme280wx,
process_services = weewx.engine.StdConvert, 
weewx.engine.StdCalibrate, weewx.engine.StdQC, 
weewx.wxservices.StdWXCalculate
xtype_services = weewx.wxxtypes.StdWXXTypes, 
weewx.wxxtypes.StdPressureCooker, weewx.wxxtypes.StdRainRater, 
weewx.wxxtypes.StdDelta
archive_services = weewx.engine.StdArchive
restful_services = weewx.restx.StdStationRegistry, 
weewx.restx.StdWunderground, weewx.restx.StdPWSweather, 
weewx.restx.StdCWOP, weewx.restx.StdWOW, weewx.restx.StdAWEKAS
report_services = weewx.engine.StdPrint, weewx.engine.StdReport

[Bme280wx]
i2c_port = 1
i2c_address = 0x76
usUnits = US
pressureKeys = pressure
pressure_must_have = ""
humidityKeys = inHumidity
humidity_must_have = ""
temperatureKeys = inTemp
temperature_must_have = ""

New problem now is that the loop apparently hangs and WeeWX quits reporting 
weather data.

sudo weewxd
LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
LOOP:   2021-08-08 07:36:29 EDT (1628422589) dateTime: 1628422589, lux: 
13470, maxSolarRad: None, outTempBatteryStatus: 0, radiation: 
106.314127861, rainRate: 0, usUnits: 1, UV: 1, windSpeed: 0.0
LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
70.6, windSpeed: 0.0
LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
70.6, windSpeed: 0.0
LOOP:   2021-08-08 07:36:39 EDT (1628422599) appTemp: 78.5400076483, 
cloudbase: 229.659363466, dateTime: 1628422599, dewpoint: 70.6, heatindex: 
72.06, humidex: 86.4663612495, maxSolarRad: None, outHumidity: 100.0, 
outTemp: 70.6, outTempBatteryStatus: 0, rainRate: 0, usUnits: 1, windchill: 
70.6, windSpeed: 0.0
LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
maxSolarRad: None, outTempBatteryStatus: 0, rain: None, rainRate: 0, 
rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0
LOOP:   2021-08-08 07:36:49 EDT (1628422609) dateTime: 1628422609, 
maxSolarRad: None, outTempBatteryStatus: 0, rain: 0.0, rainRate: 0, 
rain_total: 2.07, usUnits: 1, windDir: None, windSpeed: 0.0

And the output from the syslog is:

Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Initializing weewx 
version 4.5.1
Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using Python 2.7.16 
(default, Oct 10 2019, 22:02:15) #012[GCC 8.3.0]
Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Platform 
Linux-5.10.52-v7+-armv7l-with-debian-10.10
Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Locale is 
'en_US.UTF-8'
Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Using configuration 
file /etc/weewx/weewx.conf
Aug  8 07:36:23 raspberrypi weewx[2566] INFO __main__: Debug is 1
Aug  8 07:36:23 raspberrypi weewx[2566] DEBUG __main__: Initializing engine
Aug  8 07:36:23 raspberrypi weewx[2566] INFO weewx.engine: Loading station 
type SDR (user.sdr)
Aug  8 07:36:23 raspberrypi weewx[2566] INFO user.sdr: driver version is 
0.78
Aug  8 07:36:23 raspberrypi weewx[2566] INFO user.sdr: sensor map is 
{u'outTempBatteryStatus': u'battery.0222.AcuriteAtlasPacket', u'outTemp': 
u'temperature.0222.AcuriteAtlasPacket', u'outHumidity': 
u'humidity.0222.AcuriteAtlasPacket', u'windSpeed': 
u'wind_speed.0222.AcuriteAtlasPacket', u'windDir': 
u'wind_dir.0222.AcuriteAtlasPacket', u'UV': u'uv.0222.AcuriteAtlasPacket', 
u'rain_total': u'rain_total.0222.AcuriteAtlasPacket', u'radiation': 
u'lux.0222.AcuriteAtlasPacket', u'strikes_total': 
u'strike_count.0222.AcuriteAtlasPacket', u'strike_distance': 
u'strike_distance.0222.AcuriteAtlasPacket', u'lux': 
u'lux.0222.AcuriteAtlasPacket', u'log_unknown_sensors': u'True', 
u'log_unmapped_sensors': u'True'}
Aug  8 07:36:23 raspberrypi weewx[2566] INFO user.sdr: deltas is {u'rain': 
u'rain_total', u'lightning_s

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-07 Thread gjr80

So if I understand correctly you are basically back to where you started? 
WeeWX runs without error but no inTemp or inHumidity data is present?

> In weewx.conf the BME280 section has inTemp and inHumidity. Is this 
correct considering the packet reports temp and humidity and not inTemp and 
inHumidity?
According to the Bme280wx readme configuration instructions you should set 
HumidityKeys and TemperatureKeys to the the WeeWX loop packet fields that 
you want the BME280 humidity and temperature data to appear. So inHumidity 
and inTemp are appropriate.

As for the way ahead, whilst troubleshooting I think it wise to set 
pressure_must_have, humidity_must_have and temperature_must_have to "", 
otherwise you are masking data from the BME280 and it just adds 
confusion/detracts from the overall picture. I suggest you make those 
changes to weewx.conf, stop WeeWX if it was running and then run WeeWX 
directly as per my earlier post. Then capture and post the LOOP:/REC: 
output mentioned earlier and post the log from startup. Would be helpful if 
the loop packet capture covers the same period as the log extract - makes 
it easier to reconcile the fields.

If things are still not working as they should we can put a few extra lines 
of code in the Bme280wx service to log a few values so we can see exactly 
what is going on.

Gary 

On Saturday, 7 August 2021 at 22:41:48 UTC+10 wxwatching wrote:

> Ok, solved the problem with remote I/O error with bme280 sensor. Found a 
> wire had come loose. Also the rtl_sdr is back working. However, still not 
> getting the inside temp and humidity to show in WeeWX webpage display. I do 
> see in syslog the following packet:
>
> Aug  7 08:31:34 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=935fa750-4b08-4483-8cf3-b40b5c059717, 
> timestamp=2021-08-07 08:31:34.908185, temp=27.590 °C, pressure=1009.86 hPa, 
> humidity=33.17 % rH)
>
> In weewx.conf the BME280 section has inTemp and inHumidity. Is this 
> correct considering the packet reports temp and humidity and not inTemp and 
> inHumidity?
>
> [Bme280wx]
> i2c_port = 1
> i2c_address = 0x76
> usUnits = US
> pressureKeys = pressure
> pressure_must_have = outTemp
> humidityKeys = inHumidity
> humidity_must_have = ""
> temperatureKeys = inTemp
> temperature_must_have = ""
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/bed52788-c814-4549-b007-71b552da64d7n%40googlegroups.com.

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-07 Thread wxwatching

Ok, solved the problem with remote I/O error with bme280 sensor. Found a 
wire had come loose. Also the rtl_sdr is back working. However, still not 
getting the inside temp and humidity to show in WeeWX webpage display. I do 
see in syslog the following packet:

Aug  7 08:31:34 raspberrypi weewxd: bme280: BME280 data 
compensated_reading(id=935fa750-4b08-4483-8cf3-b40b5c059717, 
timestamp=2021-08-07 08:31:34.908185, temp=27.590 °C, pressure=1009.86 hPa, 
humidity=33.17 % rH)

In weewx.conf the BME280 section has inTemp and inHumidity. Is this correct 
considering the packet reports temp and humidity and not inTemp and 
inHumidity?

[Bme280wx]
i2c_port = 1
i2c_address = 0x76
usUnits = US
pressureKeys = pressure
pressure_must_have = outTemp
humidityKeys = inHumidity
humidity_must_have = ""
temperatureKeys = inTemp
temperature_must_have = ""


>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/dad16b63-4893-4bc8-8868-97dbeb2fad9cn%40googlegroups.com.

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-07 Thread Greg Troxel

gjr80  writes:

> I'm afraid I know little when it comes to troubleshooting i2c issues. So 
> running a python script to access the BME280 independent of WeeWX gives the 
> same error. That would seem to indicate some sort of i2c issue. Sorry, not 
> much help dealing with the latest error, you probably need an i2c 
> experienced user.

Also not an i2c expert, but a datapoint: I have a BME280 hooked up to an
ESP8266 with nodemcu, and sometimes the BME280 goes out to lunch somehow
so I stop getting reports.  That leads to a watchdog reset after 15
minutes from not posting to MQTT (cleared in puback callback), but even
on reboot I don't get temp reports.  Power cycling does get it working
again.

I was earlier using automatic mode. I switched to forced mode, and I
think I've had a failure since.  I have hints that the problem is
provoked by power glitches and static electricity.  (The ESP8266 was
powered by an old phone charger, but one that is UL listed.)

I have several other ESP8266 that have Si7021 temperature/humidity
sensors and those have been reliable, flaky power and crazy low humidity
included.

I have been thinking that my particular BME280 is damaged somehow.

So I would suggest that the OP power cycle it and see if that changes
anything.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/rmi35rlmviv.fsf%40s1.lexort.com.

signature.asc
Description: PGP signature

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-06 Thread gjr80

I'm afraid I know little when it comes to troubleshooting i2c issues. So 
running a python script to access the BME280 independent of WeeWX gives the 
same error. That would seem to indicate some sort of i2c issue. Sorry, not 
much help dealing with the latest error, you probably need an i2c 
experienced user.

With rtl_433 did you still have WeeWX running? Perhaps there was a zombie 
WeeWX process that still held the USB port used by your sdr. Have a look at 
the list of running WeeWX processes using something like:

$ ps -aux|grep weewx

and kill any that are still there. Then try rtl_433.

Does WeeWX run without error as a daemon if you disable the BME280 service 
and just run your sdr driver?

Gary

On Friday, 6 August 2021 at 21:23:34 UTC+10 wxwatching wrote:

> And just in case this helpful, here's my i2c output:
>
> sudo i2cdetect -y 1
>  0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
> 00:  -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
> 60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- 
> 70: -- -- -- -- -- -- 76 -- 
>
>
>
>>
>>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/7fbda9d8-71f2-4fd1-8d08-ffde356baaabn%40googlegroups.com.

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-06 Thread wxwatching

And just in case this helpful, here's my i2c output:

sudo i2cdetect -y 1
 0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:  -- -- -- -- -- -- -- -- -- -- -- -- -- 
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 
60: -- -- -- -- -- -- -- -- UU -- -- -- -- -- -- -- 
70: -- -- -- -- -- -- 76 -- 



>
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/2898ae22-a908-4695-a594-8293d607956cn%40googlegroups.com.

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-06 Thread wxwatching

I tried running this command and got this output, although it was 
previously returning packets from my Acurite Atlas:

sudo rtl_433
rtl_433 version 21.05-57-g3c61f600 branch feat-atlas at 202107311123 inputs 
file rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for documentation.
Trying conf file at "rtl_433.conf"...
Trying conf file at "/root/.config/rtl_433/rtl_433.conf"...
Trying conf file at "/usr/local/etc/rtl_433/rtl_433.conf"...
Trying conf file at "/etc/rtl_433/rtl_433.conf"...
Registered 161 out of 190 device decoding protocols [ 1-4 8 11-12 15-17 
19-23 25-26 29-36 38-60 63 67-71 73-100 102-105 108-116 119 121 124-128 
130-149 151-161 163-168 170-175 177-190 ]
usb_claim_interface error -6

I have also run this command and got no return message:

pi@raspberrypi:~ $ sudo modprobe -r dvb_usb_rtl28xxu
pi@raspberrypi:~ $ 

I get these results in spite of having this file 
/etc/modprobe.d/blacklist.conf with these contents:

blacklist dvb_usb_rtl28xxu
blacklist dvb_usb_rtl28xxu
blacklist rtl2830
blacklist rtl2832
blacklist dvb_usb_rtl2832u

Back to the bme280 driver. Again, this was working, but now I get error 
when running this script:

import smbus2
import bme280

port = 1
address = 0x76
bus = smbus2.SMBus(port)

calibration_params = bme280.load_calibration_params(bus, address)

# the sample method will take a single reading and return a
# compensated_reading object
data = bme280.sample(bus, address, calibration_params)

# the compensated_reading class has the following attributes
print(data.id)
print(data.timestamp)
print(data.temperature)
print(data.pressure)
print(data.humidity)

# there is a handy string representation too
print(data)


*Error when running script:*

python3 bme280_test.py
Traceback (most recent call last):
  File "bme280_test.py", line 8, in 
calibration_params = bme280.load_calibration_params(bus, address)
  File "/usr/local/lib/python3.7/dist-packages/bme280/__init__.py", line 
153, in load_calibration_params
compensation_params.dig_T1 = read.unsigned_short(0x88)
  File "/usr/local/lib/python3.7/dist-packages/bme280/reader.py", line 40, 
in unsigned_short
return self._bus.read_word_data(self._address, register) & 0x
  File "/usr/local/lib/python3.7/dist-packages/smbus2/smbus2.py", line 474, 
in read_word_data
ioctl(self.fd, I2C_SMBUS, msg)
OSError: [Errno 121] Remote I/O error

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/weewx-user/e2b6d5ac-0948-441b-a164-0ee7dddacd9bn%40googlegroups.com.

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-05 Thread wxwatching

I am running  wjcarpenter service  and 
this is the output when running WeeWX directly. By the way, it was working 
yesterday, but now nothing doing. Syslog output and [Engine] stanza 
from weewx.conf is below:

Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Initializing weewx 
version 4.5.1
Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Using Python 2.7.16 
(default, Oct 10 2019, 22:02:15) #012[GCC 8.3.0]
Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Platform 
Linux-5.10.52-v7+-armv7l-with-debian-10.10
Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Locale is 
'en_US.UTF-8'
Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Using configuration 
file /etc/weewx/weewx.conf
Aug  5 23:21:28 raspberrypi weewx[1324] INFO __main__: Debug is 1
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG __main__: Initializing engine
Aug  5 23:21:28 raspberrypi weewx[1324] INFO weewx.engine: Loading station 
type SDR (user.sdr)
Aug  5 23:21:28 raspberrypi weewx[1324] INFO user.sdr: driver version is 
0.78
Aug  5 23:21:28 raspberrypi weewx[1324] INFO user.sdr: sensor map is 
{u'outTempBatteryStatus': u'battery.0222.AcuriteAtlasPacket', u'outTemp': 
u'temperature.0222.AcuriteAtlasPacket', u'outHumidity': 
u'humidity.0222.AcuriteAtlasPacket', u'windSpeed': 
u'wind_speed.0222.AcuriteAtlasPacket', u'windDir': 
u'wind_dir.0222.AcuriteAtlasPacket', u'UV': u'uv.0222.AcuriteAtlasPacket', 
u'rain_total': u'rain_total.0222.AcuriteAtlasPacket', u'radiation': 
u'lux.0222.AcuriteAtlasPacket', u'strikes_total': 
u'strike_count.0222.AcuriteAtlasPacket', u'strike_distance': 
u'strike_distance.0222.AcuriteAtlasPacket', u'lux': 
u'lux.0222.AcuriteAtlasPacket', u'log_unknown_sensors': u'True', 
u'log_unmapped_sensors': u'True'}
Aug  5 23:21:28 raspberrypi weewx[1324] INFO user.sdr: deltas is {u'rain': 
u'rain_total', u'lightning_strike_count': u'strikes_total'}
Aug  5 23:21:28 raspberrypi weewx[1324] INFO user.sdr: startup process 
'rtl_433 -M utc -F json'
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG user.sdr: start async reader 
for stdout-thread
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG user.sdr: start async reader 
for stderr-thread
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG weewx.engine: Loading service 
weewx.engine.StdTimeSynch
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG weewx.engine: Finished 
loading service weewx.engine.StdTimeSynch
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG weewx.engine: Loading service 
user.bme280wx.Bme280wx
Aug  5 23:21:28 raspberrypi weewxd: bme280: bme280wx configuration 
{u'i2c_port': u'1', u'i2c_address': u'0x76', u'usUnits': u'US', 
u'pressureKeys': u'pressure', u'pressure_must_have': u'outTemp', 
u'humidityKeys': u'inHumidity', u'humidity_must_have': u'', 
u'temperatureKeys': u'inTemp', u'temperature_must_have': u''}
Aug  5 23:21:28 raspberrypi weewx[1324] INFO user.sdr: shutdown process 
rtl_433 -M utc -F json
Aug  5 23:21:28 raspberrypi weewx[1324] DEBUG user.sdr: waiting for 
stdout-thread
Aug  5 23:21:29 raspberrypi weewx[1324] DEBUG user.sdr: waiting for 
stderr-thread
Aug  5 23:21:29 raspberrypi weewx[1324] DEBUG user.sdr: close stdout
Aug  5 23:21:29 raspberrypi weewx[1324] DEBUG user.sdr: close stderr
Aug  5 23:21:29 raspberrypi weewx[1324] DEBUG user.sdr: kill process
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: Caught 
unrecoverable exception:
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   [Errno 
121] Remote I/O error
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
Traceback (most recent call last):
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: File 
"/usr/share/weewx/weewxd", line 151, in main
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
engine = weewx.engine.StdEngine(config_dict)
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: File 
"/usr/share/weewx/weewx/engine.py", line 93, in __init__
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
self.loadServices(config_dict)
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: File 
"/usr/share/weewx/weewx/engine.py", line 161, in loadServices
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
obj = weeutil.weeutil.get_object(svc)(self, config_dict)
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: File 
"/usr/share/weewx/user/bme280wx.py", line 61, in __init__
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
self.calibration_params = bme280.load_calibration_params(self.bus, 
self.address)
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__: File 
"/usr/local/lib/python2.7/dist-packages/bme280/__init__.py", line 153, in 
load_calibration_params
Aug  5 23:21:29 raspberrypi weewx[1324] CRITICAL __main__:   
compensation_params.dig_T1 = read.unsigned_short(0x88)
Aug  5 23:21:29 raspberrypi weewx[1324

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

2021-08-05 Thread gjr80

Hi,

Assume you are running this service 
? If so field inHumidity will only 
be added to the loop packet if field inTemp is already in the loop packet. 
I'm guessing here that the loop packets emitted by your WeeWX driver (eg 
the SDR driver) don't include the field inTemp so you are relying on the 
BME280 for inTemp. Since there seems to be some issues with getting the 
BME280 service to add the field inTemp to the loop packet this could 
explain the lack of inHumidity (though this does not explain why inTemp is 
not being populated and it is possible inHumidity is suffering from the 
same unknown problem). Suggest you change humidity_must_have = inTemp to 
humidity_must_have 
= "" to at least rule this cause out for inHumidity.

Also suggest you provide the output of running WeeWX directly 
 as well as a 
startup log extract, this will make it easier to reconcile the loop packet 
contents across all WeeWX services not just in the BME280 service. You 
already seem to have debug = 1 in weewx.conf so leave that as is. Stop 
WeeWX and then run WeeWX directly 
. Let it run for an 
archive interval or two and then post the console output (LOOP: and REC: 
packets/records) and the log from when you started WeeWX making sure you 
capture the full WeeWX startup and the subsequent couple of archive 
intervals. Finally, could you provide a copy of your [Engine] stanza from 
weewx.conf.

Gary

On Friday, 6 August 2021 at 07:52:11 UTC+10 wxwatching wrote:

> I have installed the BME280 sensor and have the drivers installed. I am 
> getting the pressure readings in the Weewx packets, but not inside humidity 
> or temperature. Here's what the config file looks like at present:
>
> [Bme280wx]
> i2c_port = 1
> i2c_address = 0x76
> usUnits = US
> pressureKeys = pressure
> pressure_must_have = outTemp
> humidityKeys = inHumidity
> humidity_must_have = inTemp
> temperatureKeys = inTemp
> temperature_must_have = ""
>
> Sample of syslog output:
>
> Aug  5 17:49:48 raspberrypi weewx[4519] INFO weewx.restx: Wunderground-RF: 
> Published record 2021-08-05 17:49:43 EDT (1628200183)
> Aug  5 17:49:48 raspberrypi weewx[4519] INFO weewx.restx: Wunderground-RF: 
> Published record 2021-08-05 17:49:43 EDT (1628200183)
> Aug  5 17:49:57 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=024bee2b-a360-4562-9e73-b1c369673601, 
> timestamp=2021-08-05 17:49:57.407220, temp=29.708 °C, pressure=1011.61 hPa, 
> humidity=37.69 % rH)
> Aug  5 17:49:57 raspberrypi weewxd: bme280: {u'outTempBatteryStatus': 0, 
> u'rain': 0.0, 'dateTime': 1628200193, u'windDir': 117.0, u'windSpeed': 2.0, 
> u'rain_total': 1.89, 'usUnits': 1}
> Aug  5 17:49:57 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=75afbec5-c8b9-4258-843a-2775fb8473a7, 
> timestamp=2021-08-05 17:49:57.444378, temp=29.724 °C, pressure=1011.58 hPa, 
> humidity=37.69 % rH)
> Aug  5 17:49:57 raspberrypi weewxd: bme280: {u'outTempBatteryStatus': 0, 
> u'rain': 0.0, 'dateTime': 1628200193, u'windDir': 117.0, u'windSpeed': 2.0, 
> u'rain_total': 1.89, 'usUnits': 1}
> Aug  5 17:49:57 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=2e3feab2-2224-49c9-b63e-be2f07e01954, 
> timestamp=2021-08-05 17:49:57.475379, temp=29.724 °C, pressure=1011.58 hPa, 
> humidity=37.69 % rH)
> Aug  5 17:49:57 raspberrypi weewxd: bme280: {u'outTempBatteryStatus': 0, 
> u'rain': 0.0, 'dateTime': 1628200193, u'windDir': 117.0, u'windSpeed': 2.0, 
> u'rain_total': 1.89, 'usUnits': 1}
> Aug  5 17:49:58 raspberrypi weewx[4519] INFO weewx.restx: Wunderground-RF: 
> Published record 2021-08-05 17:49:53 EDT (1628200193)
> Aug  5 17:49:59 raspberrypi weewx[4519] INFO weewx.restx: Wunderground-RF: 
> Published record 2021-08-05 17:49:53 EDT (1628200193)
> Aug  5 17:50:07 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=606beb9c-6882-4ebc-a91f-55bda7826f3e, 
> timestamp=2021-08-05 17:50:07.372877, temp=29.795 °C, pressure=1011.59 hPa, 
> humidity=37.20 % rH)
> Aug  5 17:50:07 raspberrypi weewxd: bme280: {u'UV': 1, u'lux': 43970, 
> u'outTempBatteryStatus': 0, u'radiation': 43970, 'dateTime': 1628200203, 
> u'windSpeed': 2.0, 'usUnits': 1}
> Aug  5 17:50:07 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=f7bc9b5e-9c75-4c33-a6c9-78c351fe8a28, 
> timestamp=2021-08-05 17:50:07.404689, temp=29.795 °C, pressure=1011.53 hPa, 
> humidity=37.19 % rH)
> Aug  5 17:50:07 raspberrypi weewxd: bme280: {u'UV': 1, u'lux': 43970, 
> u'outTempBatteryStatus': 0, u'radiation': 43970, 'dateTime': 1628200203, 
> u'windSpeed': 2.0, 'usUnits': 1}
> Aug  5 17:50:07 raspberrypi weewxd: bme280: BME280 data 
> compensated_reading(id=aac9f9f0-edb4-44df-92ef-eabcbbf82f27, 
> timestamp=2021-08-05 17:50:07.434998, temp=29.806 °C, pressure=1011.58 hPa, 
> humidity=37.20 % rH)
> Aug  5 17:50:07 ras

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

Re: [weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

[weewx-user] Re: BME280 Sensor Missing Inside Temp Readings

13 matches

Site Navigation

Mail list logo

Footer information