[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
Now have had some good rain, display is now in mm. Thanks Arend Neville On Sunday, October 25, 2020 at 10:25:43 PM UTC+10 Neville Davis wrote: > OK found my site had crashed, edited as suggested, after a light shower of > rain the data looks good so far. > > > Thanks > > Nev > > On Sunday, October 25, 2020 at 9:23:48 PM UTC+10 Neville Davis wrote: > >> Thanks I will try this edit. >> >> Nev >> >> On Sunday, October 25, 2020 at 8:01:05 PM UTC+10 Arend wrote: >> >>> I can not connect to you MQTT broker, but noticed that you are using >>> km/h for windspeed. In that case I think you should stick to METRIC for >>> unit_system and make these changes to MQTT section: >>> >>> [[MQTT]] >>> server_url = mqtt:x >>> topic = weather >>> unit_system = METRIC >>> binding = archive, loop >>> aggregation = aggregate >>> [[[inputs]]] >>> dayRain >>> name = dayRain_mm >>> units = mm >>> rainRate >>> name = rainRate_mm_per_hour >>> units = mm_per_hour >>> >>> >>> >>> Op zaterdag 24 oktober 2020 om 22:21:24 UTC+2 schreef >>> nevilled...@gmail.com: >>> Thanks I will try that, my web site http://nevsweather.duckdns.org:8048/weather/belchertown/index.html We are expecting a lot more rain this week so will be a good opportunity to get this fixed :). Regards Neville On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: > Hi Nev, > > What worked for me is changing unit_system = METRIC into METRICWX > under MQTT. But maybe you need to make some more changes (like I had to > do), do you have a website to check? > > Regards, Arend > Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef > nevilled...@gmail.com: > >> Hi >> We have had rain for the first time in many months, we had about 20mm >> in about 30 mins...total daily rain is correct, but because of the >> intensity of the rain I had the station observation rain with rain rate >> displaying cm values not mm values, i.e 1.9 instead of 19mm and 3.5 >> instead >> of 35 mm/h. The daily rain totals correct in mm. >> I cannot see where this data is calculated. >> My weewx.conf MQTT section only has this >> [[MQTT]] >> server_url = mqtt:x >> topic = weather >> unit_system = METRIC >> binding = archive, loop >> aggregation = aggregate >> >> The Belchertown section has this ( note I have a couple of special >> observations for my aircon and FARS temperature enclosure fan speed) >> [[Belchertown]] >> skin = Belchertown >> enable = true >> HTML_ROOT = public_html/belchertown >> [[[Extras]]] >> belchertown_root_url = http://x >> belchertown_locale = auto >> theme = auto >> theme_toggle_enabled = 1 >> site_title = Nev and Gays Home >> home_page_header = Weather conditions >> mqtt_websockets_enabled = 1 >> mqtt_websockets_host = xxx >> mqtt_websockets_port = 9001 >> mqtt_websockets_topic = weather/loop >> mqtt_websockets_ssl = 0 >> disconnect_live_website_visitor = 90 >> logo_image = "" >> #footer_copyright_text = "" >> forecast_enabled = 1 >> darksky_secret_key = >> earthquake_enabled = 0 >> twitter_enabled = 1 >> station_observations = inTemp, extraTemp1, >> acroomtempsensor, barometer, outHumidity, rainWithRainRate, farsSpeed >> I expect I need to set the observation RainWithRainRate to mm, my >> question is how. >> >> Thankyou >> >> Nev >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/9c273f06-48a5-480a-aaf7-8b27ab30773bn%40googlegroups.com.
[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
OK found my site had crashed, edited as suggested, after a light shower of rain the data looks good so far. Thanks Nev On Sunday, October 25, 2020 at 9:23:48 PM UTC+10 Neville Davis wrote: > Thanks I will try this edit. > > Nev > > On Sunday, October 25, 2020 at 8:01:05 PM UTC+10 Arend wrote: > >> I can not connect to you MQTT broker, but noticed that you are using km/h >> for windspeed. In that case I think you should stick to METRIC for >> unit_system and make these changes to MQTT section: >> >> [[MQTT]] >> server_url = mqtt:x >> topic = weather >> unit_system = METRIC >> binding = archive, loop >> aggregation = aggregate >> [[[inputs]]] >> dayRain >> name = dayRain_mm >> units = mm >> rainRate >> name = rainRate_mm_per_hour >> units = mm_per_hour >> >> >> >> Op zaterdag 24 oktober 2020 om 22:21:24 UTC+2 schreef >> nevilled...@gmail.com: >> >>> Thanks I will try that, my web site >>> http://nevsweather.duckdns.org:8048/weather/belchertown/index.html >>> >>> We are expecting a lot more rain this week so will be a good opportunity >>> to get this fixed :). >>> >>> Regards >>> >>> Neville >>> On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: >>> Hi Nev, What worked for me is changing unit_system = METRIC into METRICWX under MQTT. But maybe you need to make some more changes (like I had to do), do you have a website to check? Regards, Arend Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef nevilled...@gmail.com: > Hi > We have had rain for the first time in many months, we had about 20mm > in about 30 mins...total daily rain is correct, but because of the > intensity of the rain I had the station observation rain with rain rate > displaying cm values not mm values, i.e 1.9 instead of 19mm and 3.5 > instead > of 35 mm/h. The daily rain totals correct in mm. > I cannot see where this data is calculated. > My weewx.conf MQTT section only has this > [[MQTT]] > server_url = mqtt:x > topic = weather > unit_system = METRIC > binding = archive, loop > aggregation = aggregate > > The Belchertown section has this ( note I have a couple of special > observations for my aircon and FARS temperature enclosure fan speed) > [[Belchertown]] > skin = Belchertown > enable = true > HTML_ROOT = public_html/belchertown > [[[Extras]]] > belchertown_root_url = http://x > belchertown_locale = auto > theme = auto > theme_toggle_enabled = 1 > site_title = Nev and Gays Home > home_page_header = Weather conditions > mqtt_websockets_enabled = 1 > mqtt_websockets_host = xxx > mqtt_websockets_port = 9001 > mqtt_websockets_topic = weather/loop > mqtt_websockets_ssl = 0 > disconnect_live_website_visitor = 90 > logo_image = "" > #footer_copyright_text = "" > forecast_enabled = 1 > darksky_secret_key = > earthquake_enabled = 0 > twitter_enabled = 1 > station_observations = inTemp, extraTemp1, > acroomtempsensor, barometer, outHumidity, rainWithRainRate, farsSpeed > I expect I need to set the observation RainWithRainRate to mm, my > question is how. > > Thankyou > > Nev > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/22ca9a31-639e-44ac-9120-0330c6421bb6n%40googlegroups.com.
[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
Thanks I will try this edit. Nev On Sunday, October 25, 2020 at 8:01:05 PM UTC+10 Arend wrote: > I can not connect to you MQTT broker, but noticed that you are using km/h > for windspeed. In that case I think you should stick to METRIC for > unit_system and make these changes to MQTT section: > > [[MQTT]] > server_url = mqtt:x > topic = weather > unit_system = METRIC > binding = archive, loop > aggregation = aggregate > [[[inputs]]] > dayRain > name = dayRain_mm > units = mm > rainRate > name = rainRate_mm_per_hour > units = mm_per_hour > > > > Op zaterdag 24 oktober 2020 om 22:21:24 UTC+2 schreef > nevilled...@gmail.com: > >> Thanks I will try that, my web site >> http://nevsweather.duckdns.org:8048/weather/belchertown/index.html >> >> We are expecting a lot more rain this week so will be a good opportunity >> to get this fixed :). >> >> Regards >> >> Neville >> On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: >> >>> Hi Nev, >>> >>> What worked for me is changing unit_system = METRIC into METRICWX under >>> MQTT. But maybe you need to make some more changes (like I had to do), do >>> you have a website to check? >>> >>> Regards, Arend >>> Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef >>> nevilled...@gmail.com: >>> Hi We have had rain for the first time in many months, we had about 20mm in about 30 mins...total daily rain is correct, but because of the intensity of the rain I had the station observation rain with rain rate displaying cm values not mm values, i.e 1.9 instead of 19mm and 3.5 instead of 35 mm/h. The daily rain totals correct in mm. I cannot see where this data is calculated. My weewx.conf MQTT section only has this [[MQTT]] server_url = mqtt:x topic = weather unit_system = METRIC binding = archive, loop aggregation = aggregate The Belchertown section has this ( note I have a couple of special observations for my aircon and FARS temperature enclosure fan speed) [[Belchertown]] skin = Belchertown enable = true HTML_ROOT = public_html/belchertown [[[Extras]]] belchertown_root_url = http://x belchertown_locale = auto theme = auto theme_toggle_enabled = 1 site_title = Nev and Gays Home home_page_header = Weather conditions mqtt_websockets_enabled = 1 mqtt_websockets_host = xxx mqtt_websockets_port = 9001 mqtt_websockets_topic = weather/loop mqtt_websockets_ssl = 0 disconnect_live_website_visitor = 90 logo_image = "" #footer_copyright_text = "" forecast_enabled = 1 darksky_secret_key = earthquake_enabled = 0 twitter_enabled = 1 station_observations = inTemp, extraTemp1, acroomtempsensor, barometer, outHumidity, rainWithRainRate, farsSpeed I expect I need to set the observation RainWithRainRate to mm, my question is how. Thankyou Nev >>> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/f12b980e-f2f3-4fe0-b40b-022074c9e7b6n%40googlegroups.com.
[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
I can not connect to you MQTT broker, but noticed that you are using km/h for windspeed. In that case I think you should stick to METRIC for unit_system and make these changes to MQTT section: [[MQTT]] server_url = mqtt:x topic = weather unit_system = METRIC binding = archive, loop aggregation = aggregate [[[inputs]]] dayRain name = dayRain_mm units = mm rainRate name = rainRate_mm_per_hour units = mm_per_hour Op zaterdag 24 oktober 2020 om 22:21:24 UTC+2 schreef nevilled...@gmail.com: > Thanks I will try that, my web site > http://nevsweather.duckdns.org:8048/weather/belchertown/index.html > > We are expecting a lot more rain this week so will be a good opportunity > to get this fixed :). > > Regards > > Neville > On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: > >> Hi Nev, >> >> What worked for me is changing unit_system = METRIC into METRICWX under >> MQTT. But maybe you need to make some more changes (like I had to do), do >> you have a website to check? >> >> Regards, Arend >> Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef >> nevilled...@gmail.com: >> >>> Hi >>> We have had rain for the first time in many months, we had about 20mm in >>> about 30 mins...total daily rain is correct, but because of the intensity >>> of the rain I had the station observation rain with rain rate displaying cm >>> values not mm values, i.e 1.9 instead of 19mm and 3.5 instead of 35 mm/h. >>> The daily rain totals correct in mm. >>> I cannot see where this data is calculated. >>> My weewx.conf MQTT section only has this >>> [[MQTT]] >>> server_url = mqtt:x >>> topic = weather >>> unit_system = METRIC >>> binding = archive, loop >>> aggregation = aggregate >>> >>> The Belchertown section has this ( note I have a couple of special >>> observations for my aircon and FARS temperature enclosure fan speed) >>> [[Belchertown]] >>> skin = Belchertown >>> enable = true >>> HTML_ROOT = public_html/belchertown >>> [[[Extras]]] >>> belchertown_root_url = http://x >>> belchertown_locale = auto >>> theme = auto >>> theme_toggle_enabled = 1 >>> site_title = Nev and Gays Home >>> home_page_header = Weather conditions >>> mqtt_websockets_enabled = 1 >>> mqtt_websockets_host = xxx >>> mqtt_websockets_port = 9001 >>> mqtt_websockets_topic = weather/loop >>> mqtt_websockets_ssl = 0 >>> disconnect_live_website_visitor = 90 >>> logo_image = "" >>> #footer_copyright_text = "" >>> forecast_enabled = 1 >>> darksky_secret_key = >>> earthquake_enabled = 0 >>> twitter_enabled = 1 >>> station_observations = inTemp, extraTemp1, acroomtempsensor, >>> barometer, outHumidity, rainWithRainRate, farsSpeed >>> I expect I need to set the observation RainWithRainRate to mm, my >>> question is how. >>> >>> Thankyou >>> >>> Nev >>> >> -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/b164e180-3aac-46ae-8842-c51f007411aen%40googlegroups.com.
[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
Thanks I will try that, my web site http://nevsweather.duckdns.org:8048/weather/belchertown/index.html We are expecting a lot more rain this week so will be a good opportunity to get this fixed :). Regards Neville On Sunday, October 25, 2020 at 6:00:43 AM UTC+10 Arend wrote: > Hi Nev, > > What worked for me is changing unit_system = METRIC into METRICWX under > MQTT. But maybe you need to make some more changes (like I had to do), do > you have a website to check? > > Regards, Arend > Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef > nevilled...@gmail.com: > >> Hi >> We have had rain for the first time in many months, we had about 20mm in >> about 30 mins...total daily rain is correct, but because of the intensity >> of the rain I had the station observation rain with rain rate displaying cm >> values not mm values, i.e 1.9 instead of 19mm and 3.5 instead of 35 mm/h. >> The daily rain totals correct in mm. >> I cannot see where this data is calculated. >> My weewx.conf MQTT section only has this >> [[MQTT]] >> server_url = mqtt:x >> topic = weather >> unit_system = METRIC >> binding = archive, loop >> aggregation = aggregate >> >> The Belchertown section has this ( note I have a couple of special >> observations for my aircon and FARS temperature enclosure fan speed) >> [[Belchertown]] >> skin = Belchertown >> enable = true >> HTML_ROOT = public_html/belchertown >> [[[Extras]]] >> belchertown_root_url = http://x >> belchertown_locale = auto >> theme = auto >> theme_toggle_enabled = 1 >> site_title = Nev and Gays Home >> home_page_header = Weather conditions >> mqtt_websockets_enabled = 1 >> mqtt_websockets_host = xxx >> mqtt_websockets_port = 9001 >> mqtt_websockets_topic = weather/loop >> mqtt_websockets_ssl = 0 >> disconnect_live_website_visitor = 90 >> logo_image = "" >> #footer_copyright_text = "" >> forecast_enabled = 1 >> darksky_secret_key = >> earthquake_enabled = 0 >> twitter_enabled = 1 >> station_observations = inTemp, extraTemp1, acroomtempsensor, >> barometer, outHumidity, rainWithRainRate, farsSpeed >> I expect I need to set the observation RainWithRainRate to mm, my >> question is how. >> >> Thankyou >> >> Nev >> > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5adc1019-8ead-4dc0-883f-a77139c4daabn%40googlegroups.com.
[weewx-user] Re: Belchertown skin 1.1 RainWithRainRate in cm not mm
Hi Nev, What worked for me is changing unit_system = METRIC into METRICWX under MQTT. But maybe you need to make some more changes (like I had to do), do you have a website to check? Regards, Arend Op zaterdag 24 oktober 2020 om 11:17:53 UTC+2 schreef nevilled...@gmail.com: > Hi > We have had rain for the first time in many months, we had about 20mm in > about 30 mins...total daily rain is correct, but because of the intensity > of the rain I had the station observation rain with rain rate displaying cm > values not mm values, i.e 1.9 instead of 19mm and 3.5 instead of 35 mm/h. > The daily rain totals correct in mm. > I cannot see where this data is calculated. > My weewx.conf MQTT section only has this > [[MQTT]] > server_url = mqtt:x > topic = weather > unit_system = METRIC > binding = archive, loop > aggregation = aggregate > > The Belchertown section has this ( note I have a couple of special > observations for my aircon and FARS temperature enclosure fan speed) > [[Belchertown]] > skin = Belchertown > enable = true > HTML_ROOT = public_html/belchertown > [[[Extras]]] > belchertown_root_url = http://x > belchertown_locale = auto > theme = auto > theme_toggle_enabled = 1 > site_title = Nev and Gays Home > home_page_header = Weather conditions > mqtt_websockets_enabled = 1 > mqtt_websockets_host = xxx > mqtt_websockets_port = 9001 > mqtt_websockets_topic = weather/loop > mqtt_websockets_ssl = 0 > disconnect_live_website_visitor = 90 > logo_image = "" > #footer_copyright_text = "" > forecast_enabled = 1 > darksky_secret_key = > earthquake_enabled = 0 > twitter_enabled = 1 > station_observations = inTemp, extraTemp1, acroomtempsensor, > barometer, outHumidity, rainWithRainRate, farsSpeed > I expect I need to set the observation RainWithRainRate to mm, my question > is how. > > Thankyou > > Nev > -- You received this message because you are subscribed to the Google Groups "weewx-user" group. To unsubscribe from this group and stop receiving emails from it, send an email to weewx-user+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/weewx-user/5bf36cca-9bdb-46db-a33c-2a4abb83c630n%40googlegroups.com.