[weewx-user] Re: WH4000 (WH3080) changes transmitter ID when it starts to Rain

2018-12-28 Thread Kalli 
Hallo
bei mir ist jetzt auch die UV einheit tot, ich werde im Frühjar mal auf das 
Dach gehen und die UV einheit entfernen , und mal nachsehen was da los ist.

cu. Kalli

Am Montag, 3. September 2018 13:01:41 UTC+2 schrieb Bostjan Potocnik:
>
> I have issues with WH4000 (using SDR it's WH3080). When starts to rain 
> (almost every time) outside unit for temp, rain, ... changes transmitter ID 
> (restarts?).
> That causes that WH4000 console loses outside sensor and it sometimes 
> takes more than 3hours to connect to externla sensor with new ID again.
> I discovered that while troubleshooting wireless connectivity (due to lost 
> connectivity when raining) by using SDR. Logs below:
>
> *Jul 22 16:44:29* weewx-sdr weewx-weewx-sdr[578]: sdr: MainThread: 
> lines=['{"time" : "2018-07-22 14:44:26", "model" : "Fine Offset Electronics 
> WH1080/WH3080 Weather Station", "msg_type" : 0, 
> *"id" : 73*, "temperature_C" : 18.900, "humidity" : 86, "direction_str" : 
> "N", "direction_deg" : "0", "speed" : 3.672, "gust" : 4.896, *"rain" : 
> 14.700*, "battery" : "OK"}\n', 
> .
> .
> .
> *Jul 22 16:44:41* weewx-sdr weewx-weewx-sdr[578]: sdr: MainThread: 
> lines=['{"time" : "2018-07-22 14:44:38", "model" : "Fine Offset Electronics 
> WH1080/WH3080 Weather Station", "msg_type" : 0,
> * "id" : 151*, "temperature_C" : 18.900, "humidity" : 86, "direction_str" 
> : "N", "direction_deg" : "0", "speed" : 0.000, "gust" : 0.000, *"rain" : 
> 0.000*, "battery" : "OK"}\n']
>
>
> *Anyone with the same experiences and maybe solutions?*
>
> I have no problems with UV/Lux sensor, that one does not change 
> transmitter ID!
>
> Thanks,
>
> Bostjan
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: WH4000 (WH3080) changes transmitter ID when it starts to Rain

2018-12-27 Thread Michael Waldor 
I, too, have the same problem.

My guess is that due to heavy rain the radio signal is attenuated too much. 
I use a raspberry to log the data, 10cm next to the weather station. 2 
weeks ago I've switched from wifi to LAN connection thus reducing radio 
interference somehow. Till now I did not loose the outdoor sensors even 
during rain.

But I suffer under two other problems:
1. UV sensor has died after 6months - its data degraded end of July over 
some days till it was zero continuously.
2. I sometimes have USB connection problems being solved by rebooting my 
raspberry - I use a watchdog now to reboot automatically.

Am Donnerstag, 13. Dezember 2018 20:11:04 UTC+1 schrieb Kalli:
>
>  Bei mir ist das auch so.
> nur die ID vom UV sensor bleibt.
>

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[weewx-user] Re: WH4000 (WH3080) changes transmitter ID when it starts to Rain

2018-12-13 Thread Kalli 
 Bei mir ist das auch so.
nur die ID vom UV sensor bleibt.

-- 
You received this message because you are subscribed to the Google Groups 
"weewx-user" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to weewx-user+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.