Re: [Ninux-Wireless] OpenWisp e Ansible NNXX 2 router nella stessa LAN
Il 05/04/2018 17:25, Michele Salerno ha scritto: > Dal router (A) con router -n vedo tutti i router connessi al server OpenWisp. > Dal router (B) vedo le 2 reti /25, la rete della VPN ma le altre no Ciao Michele, non ho capito esattamente quali voci della tabella di routing non ti convincono. Io vedo alcune rotte di servizio che servono a garantire che il raggiungimento di alcuni host remoti passi sempre e comunque dal tunnel e non da un eventuale default gw presente. Le aggiungono i software VPN in automatico, tipicamente. Stefanauss. ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless
[Ninux-Wireless] OpenWisp e Ansible NNXX 2 router nella stessa LAN
Ciao ragazzi per motivi di cablaggio ho dovuto mettere 2 router nella stessa LAN impostando 2 /25. I router sono in 2 stanze diverse, dove il router (A) è collegato alla wan del router TIM. Il router (B) è collegato al router (A) sulla wan tramite powerline. Funziona tutto ma la tabella di routing non mi convince. Il router B è per attaccare le antenne in quanto ho problemi con le vlan sul TP-Link C2600 ed il powerline. Dal router (A) con router -n vedo tutti i router connessi al server OpenWisp. Dal router (B) vedo le 2 reti /25, la rete della VPN ma le altre no! Per intenderci, il router A vede questo: root@Kali-Oppido-c2600:~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 192.168.1.1 0.0.0.0 UG0 00 eth0 10.27.0.0 10.27.253.43255.255.255.0 UG2 00 vpnbas 10.27.0.1 10.27.253.43255.255.255.255 UGH 2 00 vpnbas 10.27.22.0 0.0.0.0 255.255.255.128 U 0 00 br-lan 10.27.22.12810.27.253.60255.255.255.128 UG2 00 vpnbas 10.27.22.12910.27.253.60255.255.255.255 UGH 2 00 vpnbas 10.27.253.0 0.0.0.0 255.255.255.0 U 0 00 vpnbas 10.27.253.5910.27.253.59255.255.255.255 UGH 2 00 vpnbas 172.27.0.0 0.0.0.0 255.255.0.0 U 0 00 eth1.3 172.27.0.0 0.0.0.0 255.255.0.0 U 0 00 eth1.4 172.27.0.0 0.0.0.0 255.255.0.0 U 0 00 eth1.5 172.27.0.0 0.0.0.0 255.255.0.0 U 0 00 br-ninux 192.168.1.0 0.0.0.0 255.255.255.0 U 0 00 eth0 192.168.20.00.0.0.0 255.255.255.0 U 0 00 hotspot Per intenderci, il router B vede questo: root@Kali-Oppido-2:~ # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 0.0.0.0 10.27.22.1 0.0.0.0 UG0 00 eth0.2 0.0.0.0 10.27.253.530.0.0.0 UG2 00 vpnbas 10.27.22.0 0.0.0.0 255.255.255.128 U 0 00 eth0.2 10.27.22.0 10.27.253.53255.255.255.128 UG2 00 vpnbas 10.27.22.1 0.0.0.0 255.255.255.255 UH0 00 eth0.2 10.27.22.1280.0.0.0 255.255.255.128 U 0 00 br-lan 10.27.253.0 0.0.0.0 255.255.255.0 U 0 00 vpnbas 172.27.0.0 0.0.0.0 255.255.0.0 U 0 00 ninux 192.168.21.00.0.0.0 255.255.255.0 U 0 00 hotspot Idee?? ___ Wireless mailing list Wireless@ml.ninux.org http://ml.ninux.org/mailman/listinfo/wireless