I have not seen this issue on any of our i7 x86 routers...
A few questions:-
What is connected to these Ethernet ports ? any surge protectors in the middle
?
Disabling them and enabling them have any effect ?
Doing a physical disconnect or reconnect have any affect ?
When did the problem start ?
This sounds like a hardware problem more than anything else (i.e. not a
software issue).
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
> From: "Chris Fabien"
> To: "WISPA General List"
> Sent: Thursday, June 1, 2017 4:28:53 PM
> Subject: [WISPA] Maxxwave x86 router ethernet port problem
> We have a maxxwave i7 x86 router from Baltic Networks. What I'm seeing is a
> problem where the ethernet ports stop working one at a time. The remote side
> will still show a 1G link but the router either shows 10Meg or No Link and no
> traffic will pass.
> This happens to the ports one at a time maybe once a week or so, until several
> are not working. Then I have to power cycle the router to get them all back
> working again.
> Running 6.32.3
> Is this just faulty hardware that I need to replace, or any other suggestions?
> Thanks
> Chris Fabien
> LakeNet LLC
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless