Re: [WISPA] [WISP] 900 PtP
I have a few horizontal and they do tend to traverse through woods better than the verticals, but the noise floor for us is just the opposite. There are a half dozen Canopy systems running horizontal omni's just to my east destroying most of the 900 spectrum. I don't have any sectors wider than 120 deg.- most 60 to100 and all the verticals I have are Antel. I use one 120 MTI horizontal and one pac wireless 120 horizontal. I do have a one Tranzeo that uses the integrated panel to feed three houses. I would have to look and see if it's vertical or horizontal, it's been a few years since I've been up that tower and it points away from the rest of my network so I've never really cared. I guess I like the Cushcraft's because of durability and mostly within 2-3 miles we use a 6dbd that costs about $35 verses the 13 dbd that costs $130 for further out. Thanks again, Dave D. Ryan Spott wrote: > David Hulsebus wrote: > >> Ryan, How do you like the Moonblink antennas? >> > Eh, they are OK. Getting timely shipping and shipping information out of > Moonblink makes ordering from them a head-ache for my ordering person. > The antennas are sleek aluminum but they are fragile so you can't handle > them much past one installation. > >> I've been using Cushcraft >> for some time, they've worked very well. I've used the M2inc. but found >> rain to be an issue with the open round beam holding water. >> >> If I have line of sight I can get 8-10 miles out of a link, but never >> through many trees. I have two small 120 vertical sectors using Tranzeo >> and I wish we could get links that are as stable as the WaveRiders we >> have in place. I do use a 908.4 filter on the Tranzeos and reduced my >> noise floor from -75 to -95. They were designed for WaveRiders but work >> well for a 5MHz channel at 908 on the Tranzeos. I even tried the >> Mikrotik 900 and had even poorer luck with them. >> >> > Ditch the Verticle sectors. They are noise vacuums. I am using a simple > TR902-11 panel for my AP. When I use the sectors my noise floor gets so > loud as to make the AP unusable. > >> I won't say the WaveRiders were my best decision, but having tested >> Trango, Canopy first, it was the best for my environment at the time. >> I've still got 400 EUM3000-3005's in place across 15 sectors. We can get >> 1.2MB down and 800K up for about 30-35 clients. We added their new >> CCU8000 and a dozen clients so far on a new build out this year and >> expect to max out at 30-40 subs per AP and if they are like the >> CCU3000's will still give everyone 6 MB down and 4 MB up. We pay >> extremely high prices for the WaveRider EUM's which really hurts the ROI. >> >> > Yeah, the waveriders. I think the only reason you have the CCU3000s is > because of the competitive pressure of Tranzeo/UBNT handing out > 802.11b/g type speeds over 900mhz. > > ryan > >> Dave >> >> D. Ryan Spott wrote: >> >> >>> http://www.tranzeofaq.com/images/lewis.jpg >>> This is a 900Mhz Client running at 5Mhz on TR902 radios. The AP is a >>> TR902-13 and the client is a TR902-N with a 15DB yagi from Moonblink >>> wireless. >>> >>> ryan >>> >>> >>> >>> >>> > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
David Hulsebus wrote: > Ryan, How do you like the Moonblink antennas? Eh, they are OK. Getting timely shipping and shipping information out of Moonblink makes ordering from them a head-ache for my ordering person. The antennas are sleek aluminum but they are fragile so you can't handle them much past one installation. > I've been using Cushcraft > for some time, they've worked very well. I've used the M2inc. but found > rain to be an issue with the open round beam holding water. > > If I have line of sight I can get 8-10 miles out of a link, but never > through many trees. I have two small 120 vertical sectors using Tranzeo > and I wish we could get links that are as stable as the WaveRiders we > have in place. I do use a 908.4 filter on the Tranzeos and reduced my > noise floor from -75 to -95. They were designed for WaveRiders but work > well for a 5MHz channel at 908 on the Tranzeos. I even tried the > Mikrotik 900 and had even poorer luck with them. > Ditch the Verticle sectors. They are noise vacuums. I am using a simple TR902-11 panel for my AP. When I use the sectors my noise floor gets so loud as to make the AP unusable. > I won't say the WaveRiders were my best decision, but having tested > Trango, Canopy first, it was the best for my environment at the time. > I've still got 400 EUM3000-3005's in place across 15 sectors. We can get > 1.2MB down and 800K up for about 30-35 clients. We added their new > CCU8000 and a dozen clients so far on a new build out this year and > expect to max out at 30-40 subs per AP and if they are like the > CCU3000's will still give everyone 6 MB down and 4 MB up. We pay > extremely high prices for the WaveRider EUM's which really hurts the ROI. > Yeah, the waveriders. I think the only reason you have the CCU3000s is because of the competitive pressure of Tranzeo/UBNT handing out 802.11b/g type speeds over 900mhz. ryan > Dave > > D. Ryan Spott wrote: > >> http://www.tranzeofaq.com/images/lewis.jpg >> This is a 900Mhz Client running at 5Mhz on TR902 radios. The AP is a >> TR902-13 and the client is a TR902-N with a 15DB yagi from Moonblink >> wireless. >> >> ryan >> >> >> >> WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
I'm currently using a 900mhz Trango SU for this one micro-site. The tower is 35ft tall, and I'm using 2.4 ghz for the AP. There is about 25 homes in this area. I put up the site hoping to get at least 5 of them. With the work of mouth traveling in that area, I ended up with 90% of the homes there. The ones that didn't want the service were old couples that didn't use the Internet. I will be replacing the 35ft tower with a 60ft self support tower, and upgrading to a pair of Deliberant 900mhz radios. If you are going to be in the WISP business, you have to be part speculator. - Original Message From: RickG To: WISPA General List Sent: Wednesday, June 3, 2009 10:48:42 PM Subject: Re: [WISPA] [WISP] 900 PtP LOL, I've thought about going into the tree trimming/cutting business to complement the WISP! I've cut my share for customers. I'm the only one around here that likes tornadoes & ice storms :) -RickG On Wed, Jun 3, 2009 at 12:09 PM, Rick Harnish wrote: > Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for > link integrity! :) > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Marlon K. Schafer > Sent: Wednesday, June 03, 2009 11:28 AM > To: w...@part-15.org > Cc: WISPA General List > Subject: Re: [WISPA] [WISP] 900 PtP > > > > >> Have you tried going H rather than V or vicea-versa ? > > Yes. > >> Try a ptp 900mhz at that range or to much noise for it ? > > Not detecting any. Could be a phone or something though. Something that > comes and goes. This really seemed to start with a change in the weather > though. > >> Try something other than Trango ? > > Haven't tried that yet. > > I no have an option of building a two hope ptp link via a third location. > This would allow me to go around the trees all together, but it would also > introduce another point of failure. The best part? There are only 15 subs > off of this system, I'm not sure how much I'm willing to spend here just > yet. Especially since we end up with so much lightning damage every year > (no way around it, we already have all the protection we can get). This is > in a huge storm corridor. > > marlon > >> >> -- Original Message -- >> From: "Marlon K. Schafer" >> Reply-To: w...@part-15.org >> Date: Tue, 2 Jun 2009 22:09:33 -0700 >> >>>I have a trango link that's only giving me 2 megs. Sometimes much less. >>>The link is 2.3 or so miles. There are TWO pine trees in the way. >>> >>>What would you guys use? I need to get more speed to the remote tower. >>> >>>thanks, >>>marlon >>> >>>- Original Message - >>>From: "RickG" >>>To: >>>Sent: Thursday, May 28, 2009 8:47 PM >>>Subject: Re: [WISP] 900 PtP >>> >>> >>>I just did this set up for a customer. Unfortunately they have ltos of >>>pine trees. The panels didnt cut it and neither did yagis. Big grids >>>did the trick. >>>-RickG >>> >>>On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: >>>> Mikrotik xr9's with arc wireless panels If the link budget supports >>>> them. >>>> Throw in 411a boards and you have a sweet setup. >>>> >>>> Justin >>>> >>>> >>>> -- >>>> Justin Wilson >>>> >>>> >>>> From: Jeremy Grip >>>> Sent: Thursday, May 28, 2009 7:06 PM >>>> To: w...@part-15.org >>>> Subject: [WISP] 900 PtP >>>> >>>> Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at >>>> the >>>> far end. Should give me as much BW as possible, support most flavors of >>>> QOS >>>> for VoIP, and price matters. >>>> >>>> TIA, >>>> >>>> Jeremy Grip >>>> North Branch Networks, LLC >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> >> >> >> >> >> Sent via the WebMail system at avolve.net >> >> >> >> > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > ---
Re: [WISPA] [WISP] 900 PtP
LOL, I've thought about going into the tree trimming/cutting business to complement the WISP! I've cut my share for customers. I'm the only one around here that likes tornadoes & ice storms :) -RickG On Wed, Jun 3, 2009 at 12:09 PM, Rick Harnish wrote: > Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for > link integrity! :) > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Marlon K. Schafer > Sent: Wednesday, June 03, 2009 11:28 AM > To: w...@part-15.org > Cc: WISPA General List > Subject: Re: [WISPA] [WISP] 900 PtP > > > > >> Have you tried going H rather than V or vicea-versa ? > > Yes. > >> Try a ptp 900mhz at that range or to much noise for it ? > > Not detecting any. Could be a phone or something though. Something that > comes and goes. This really seemed to start with a change in the weather > though. > >> Try something other than Trango ? > > Haven't tried that yet. > > I no have an option of building a two hope ptp link via a third location. > This would allow me to go around the trees all together, but it would also > introduce another point of failure. The best part? There are only 15 subs > off of this system, I'm not sure how much I'm willing to spend here just > yet. Especially since we end up with so much lightning damage every year > (no way around it, we already have all the protection we can get). This is > in a huge storm corridor. > > marlon > >> >> -- Original Message -- >> From: "Marlon K. Schafer" >> Reply-To: w...@part-15.org >> Date: Tue, 2 Jun 2009 22:09:33 -0700 >> >>>I have a trango link that's only giving me 2 megs. Sometimes much less. >>>The link is 2.3 or so miles. There are TWO pine trees in the way. >>> >>>What would you guys use? I need to get more speed to the remote tower. >>> >>>thanks, >>>marlon >>> >>>- Original Message - >>>From: "RickG" >>>To: >>>Sent: Thursday, May 28, 2009 8:47 PM >>>Subject: Re: [WISP] 900 PtP >>> >>> >>>I just did this set up for a customer. Unfortunately they have ltos of >>>pine trees. The panels didnt cut it and neither did yagis. Big grids >>>did the trick. >>>-RickG >>> >>>On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: >>>> Mikrotik xr9's with arc wireless panels If the link budget supports >>>> them. >>>> Throw in 411a boards and you have a sweet setup. >>>> >>>> Justin >>>> >>>> >>>> -- >>>> Justin Wilson >>>> >>>> >>>> From: Jeremy Grip >>>> Sent: Thursday, May 28, 2009 7:06 PM >>>> To: w...@part-15.org >>>> Subject: [WISP] 900 PtP >>>> >>>> Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at >>>> the >>>> far end. Should give me as much BW as possible, support most flavors of >>>> QOS >>>> for VoIP, and price matters. >>>> >>>> TIA, >>>> >>>> Jeremy Grip >>>> North Branch Networks, LLC >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> >> >> >> >> >> Sent via the WebMail system at avolve.net >> >> >> >> > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 > 05:53:00 > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
Because it just runs and runs and runs... I use it every year. gone thru more chains than I can count. I live in Michigan and heat with wood. rea...@muddyfrogwater.us wrote: How could you? They had no redeeming qualities when new :) Of course, there's really nothing to say about a Poulan or Echo, either, other than they look cute in catalogs :) BTW, what's the farthest distance any of you have gotten through "forest" with 900mhz? - Original Message - From: "Blair Davis" To: "WISPA General List" Sent: Wednesday, June 03, 2009 10:01 AM Subject: Re: [WISPA] [WISP] 900 PtP I like my 30 year old Johnsred... Marlon K. Schafer wrote: LOL I don't have a Stihl. I have a Pulan and an Echo though! hehehehe It would sure be nice to be able to do that! marlon WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
The problem is the gas melts the plastic... Kevin Neal wrote: A Supersoaker full of gasoline and a match would make quick work of trees..still haven't tried it yet. -Kevin On Wed, Jun 3, 2009 at 11:01 AM, Blair Davis wrote: I like my 30 year old Johnsred... Marlon K. Schafer wrote: LOL I don't have a Stihl. I have a Pulan and an Echo though! hehehehe It would sure be nice to be able to do that! marlon - Original Message - From: "Rick Harnish" To: "'WISPA General List'" Sent: Wednesday, June 03, 2009 9:09 AM Subject: Re: [WISPA] [WISP] 900 PtP Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for link integrity! :) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org ] On Behalf Of Marlon K. Schafer Sent: Wednesday, June 03, 2009 11:28 AM To: w...@part-15.org Cc: WISPA General List Subject: Re: [WISPA] [WISP] 900 PtP Have you tried going H rather than V or vicea-versa ? Yes. Try a ptp 900mhz at that range or to much noise for it ? Not detecting any. Could be a phone or something though. Something that comes and goes. This really seemed to start with a change in the weather though. Try something other than Trango ? Haven't tried that yet. I no have an option of building a two hope ptp link via a third location. This would allow me to go around the trees all together, but it would also introduce another point of failure. The best part? There are only 15 subs off of this system, I'm not sure how much I'm willing to spend here just yet. Especially since we end up with so much lightning damage every year (no way around it, we already have all the protection we can get). This is in a huge storm corridor. marlon -- Original Message -- From: "Marlon K. Schafer" Reply-To: w...@part-15.org Date: Tue, 2 Jun 2009 22:09:33 -0700 I have a trango link that's only giving me 2 megs. Sometimes much less. The link is 2.3 or so miles. There are TWO pine trees in the way. What would you guys use? I need to get more speed to the remote tower. thanks, marlon - Original Message - From: "RickG" To: Sent: Thursday, May 28, 2009 8:47 PM Subject: Re: [WISP] 900 PtP I just did this set up for a customer. Unfortunately they have ltos of pine trees. The panels didnt cut it and neither did yagis. Big grids did the trick. -RickG On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: Mikrotik xr9's with arc wireless panels If the link budget supports them. Throw in 411a boards and you have a sweet setup. Justin -- Justin Wilson From: Jeremy Grip Sent: Thursday, May 28, 2009 7:06 PM To: w...@part-15.org Subject: [WISP] 900 PtP Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at the far end. Should give me as much BW as possible, support most flavors of QOS for VoIP, and price matters. TIA, Jeremy Grip North Branch Networks, LLC Sent via the WebMail system at avolve.net WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 05:53:00 WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today!http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -
Re: [WISPA] [WISP] 900 PtP
Ryan, How do you like the Moonblink antennas? I've been using Cushcraft for some time, they've worked very well. I've used the M2inc. but found rain to be an issue with the open round beam holding water. If I have line of sight I can get 8-10 miles out of a link, but never through many trees. I have two small 120 vertical sectors using Tranzeo and I wish we could get links that are as stable as the WaveRiders we have in place. I do use a 908.4 filter on the Tranzeos and reduced my noise floor from -75 to -95. They were designed for WaveRiders but work well for a 5MHz channel at 908 on the Tranzeos. I even tried the Mikrotik 900 and had even poorer luck with them. I won't say the WaveRiders were my best decision, but having tested Trango, Canopy first, it was the best for my environment at the time. I've still got 400 EUM3000-3005's in place across 15 sectors. We can get 1.2MB down and 800K up for about 30-35 clients. We added their new CCU8000 and a dozen clients so far on a new build out this year and expect to max out at 30-40 subs per AP and if they are like the CCU3000's will still give everyone 6 MB down and 4 MB up. We pay extremely high prices for the WaveRider EUM's which really hurts the ROI. Dave D. Ryan Spott wrote: > http://www.tranzeofaq.com/images/lewis.jpg > This is a 900Mhz Client running at 5Mhz on TR902 radios. The AP is a > TR902-13 and the client is a TR902-N with a 15DB yagi from Moonblink > wireless. > > ryan > > > > David Hulsebus wrote: > >> 1/2 Mile through dense deciduous trees. About 1mile through a less dense >> forest using WaveRider. Evergreen trees less than a 1/4 mile. I have a >> water tank about 2 miles away that when I walk through 50 yards of large >> and tall 70-80 ft trees I see plain as day. But even in the winter the >> reflections through the trees make it impossible to maintain a quality >> link. I find that if I'm 100 yards from a forest or tree line I have >> good results out 3-4 miles >> >> Dave >> >> rea...@muddyfrogwater.us wrote: >> >> >>> How could you? They had no redeeming qualities when new :) >>> >>> Of course, there's really nothing to say about a Poulan or Echo, either, >>> other than they look cute in catalogs :) >>> >>> BTW, what's the farthest distance any of you have gotten through "forest" >>> with 900mhz? >>> >>> >>> >>> >>> >>> >>> >>> - Original Message - >>> From: "Blair Davis" >>> To: "WISPA General List" >>> Sent: Wednesday, June 03, 2009 10:01 AM >>> Subject: Re: [WISPA] [WISP] 900 PtP >>> >>> >>> >>> >>> >>>> I like my 30 year old Johnsred... >>>> >>>> Marlon K. Schafer wrote: >>>> LOL >>>> >>>> I don't have a Stihl. I have a Pulan and an Echo though! hehehehe >>>> >>>> It would sure be nice to be able to do that! >>>> marlon >>>> >>>> >>>> >>>> >>> >>> WISPA Wants You! Join today! >>> http://signup.wispa.org/ >>> >>> >>> WISPA Wireless List: wireless@wispa.org >>> >>> Subscribe/Unsubscribe: >>> http://lists.wispa.org/mailman/listinfo/wireless >>> >>> Archives: http://lists.wispa.org/pipermail/wireless/ >>> >>> >>> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
http://www.tranzeofaq.com/images/lewis.jpg This is a 900Mhz Client running at 5Mhz on TR902 radios. The AP is a TR902-13 and the client is a TR902-N with a 15DB yagi from Moonblink wireless. ryan David Hulsebus wrote: > 1/2 Mile through dense deciduous trees. About 1mile through a less dense > forest using WaveRider. Evergreen trees less than a 1/4 mile. I have a > water tank about 2 miles away that when I walk through 50 yards of large > and tall 70-80 ft trees I see plain as day. But even in the winter the > reflections through the trees make it impossible to maintain a quality > link. I find that if I'm 100 yards from a forest or tree line I have > good results out 3-4 miles > > Dave > > rea...@muddyfrogwater.us wrote: > >> How could you? They had no redeeming qualities when new :) >> >> Of course, there's really nothing to say about a Poulan or Echo, either, >> other than they look cute in catalogs :) >> >> BTW, what's the farthest distance any of you have gotten through "forest" >> with 900mhz? >> >> >> >> >> >> >> >> - Original Message - >> From: "Blair Davis" >> To: "WISPA General List" >> Sent: Wednesday, June 03, 2009 10:01 AM >> Subject: Re: [WISPA] [WISP] 900 PtP >> >> >> >> >>> I like my 30 year old Johnsred... >>> >>> Marlon K. Schafer wrote: >>> LOL >>> >>> I don't have a Stihl. I have a Pulan and an Echo though! hehehehe >>> >>> It would sure be nice to be able to do that! >>> marlon >>> >>> >>> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
1/2 Mile through dense deciduous trees. About 1mile through a less dense forest using WaveRider. Evergreen trees less than a 1/4 mile. I have a water tank about 2 miles away that when I walk through 50 yards of large and tall 70-80 ft trees I see plain as day. But even in the winter the reflections through the trees make it impossible to maintain a quality link. I find that if I'm 100 yards from a forest or tree line I have good results out 3-4 miles Dave rea...@muddyfrogwater.us wrote: > How could you? They had no redeeming qualities when new :) > > Of course, there's really nothing to say about a Poulan or Echo, either, > other than they look cute in catalogs :) > > BTW, what's the farthest distance any of you have gotten through "forest" > with 900mhz? > > > > > > > > - Original Message - > From: "Blair Davis" > To: "WISPA General List" > Sent: Wednesday, June 03, 2009 10:01 AM > Subject: Re: [WISPA] [WISP] 900 PtP > > > >> I like my 30 year old Johnsred... >> >> Marlon K. Schafer wrote: >> LOL >> >> I don't have a Stihl. I have a Pulan and an Echo though! hehehehe >> >> It would sure be nice to be able to do that! >> marlon >> >> > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
A Supersoaker full of gasoline and a match would definitely fix it so you do not care what kind of signal you are getting anymore. Kevin Neal wrote: > A Supersoaker full of gasoline and a match would make quick work of > trees..still haven't tried it yet. > -Kevin > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
How could you? They had no redeeming qualities when new :) Of course, there's really nothing to say about a Poulan or Echo, either, other than they look cute in catalogs :) BTW, what's the farthest distance any of you have gotten through "forest" with 900mhz? - Original Message - From: "Blair Davis" To: "WISPA General List" Sent: Wednesday, June 03, 2009 10:01 AM Subject: Re: [WISPA] [WISP] 900 PtP >I like my 30 year old Johnsred... > > Marlon K. Schafer wrote: > LOL > > I don't have a Stihl. I have a Pulan and an Echo though! hehehehe > > It would sure be nice to be able to do that! > marlon > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
A Supersoaker full of gasoline and a match would make quick work of trees..still haven't tried it yet. -Kevin On Wed, Jun 3, 2009 at 11:01 AM, Blair Davis wrote: > I like my 30 year old Johnsred... > > > Marlon K. Schafer wrote: > > LOL > > I don't have a Stihl. I have a Pulan and an Echo though! hehehehe > > It would sure be nice to be able to do that! > marlon > > - Original Message - > From: "Rick Harnish" > To: "'WISPA General List'" > Sent: Wednesday, June 03, 2009 9:09 AM > Subject: Re: [WISPA] [WISP] 900 PtP > > > > > Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for > link integrity! :) > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org > ] On > Behalf Of Marlon K. Schafer > Sent: Wednesday, June 03, 2009 11:28 AM > To: w...@part-15.org > Cc: WISPA General List > Subject: Re: [WISPA] [WISP] 900 PtP > > > > > > > Have you tried going H rather than V or vicea-versa ? > > > Yes. > > > > Try a ptp 900mhz at that range or to much noise for it ? > > > Not detecting any. Could be a phone or something though. Something that > comes and goes. This really seemed to start with a change in the weather > though. > > > > Try something other than Trango ? > > > Haven't tried that yet. > > I no have an option of building a two hope ptp link via a third location. > This would allow me to go around the trees all together, but it would also > introduce another point of failure. The best part? There are only 15 > subs > off of this system, I'm not sure how much I'm willing to spend here just > yet. Especially since we end up with so much lightning damage every year > (no way around it, we already have all the protection we can get). This > is > in a huge storm corridor. > > marlon > > > > -- Original Message -- > From: "Marlon K. Schafer" > Reply-To: w...@part-15.org > Date: Tue, 2 Jun 2009 22:09:33 -0700 > > > > I have a trango link that's only giving me 2 megs. Sometimes much less. > The link is 2.3 or so miles. There are TWO pine trees in the way. > > What would you guys use? I need to get more speed to the remote tower. > > thanks, > marlon > > - Original Message - > From: "RickG" > To: > Sent: Thursday, May 28, 2009 8:47 PM > Subject: Re: [WISP] 900 PtP > > > I just did this set up for a customer. Unfortunately they have ltos of > pine trees. The panels didnt cut it and neither did yagis. Big grids > did the trick. > -RickG > > On Thu, May 28, 2009 at 8:08 PM, Justin Wilson > wrote: > > > Mikrotik xr9's with arc wireless panels If the link budget supports > them. > Throw in 411a boards and you have a sweet setup. > > Justin > > > -- > Justin Wilson > > > From: Jeremy Grip > Sent: Thursday, May 28, 2009 7:06 PM > To: w...@part-15.org > Subject: [WISP] 900 PtP > > Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at > the > far end. Should give me as much BW as possible, support most flavors of > QOS > for VoIP, and price matters. > > TIA, > > Jeremy Grip > North Branch Networks, LLC > > > > > > > > > > > Sent via the WebMail system at avolve.net > > > > > > > > WISPA Wants You! Join today!http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 > 05:53:00 > > > > > WISPA Wants You! Join today!http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe:http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > WISPA Wants
Re: [WISPA] [WISP] 900 PtP
I like my 30 year old Johnsred... Marlon K. Schafer wrote: LOL I don't have a Stihl. I have a Pulan and an Echo though! hehehehe It would sure be nice to be able to do that! marlon - Original Message - From: "Rick Harnish" To: "'WISPA General List'" Sent: Wednesday, June 03, 2009 9:09 AM Subject: Re: [WISPA] [WISP] 900 PtP Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for link integrity! :) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Wednesday, June 03, 2009 11:28 AM To: w...@part-15.org Cc: WISPA General List Subject: Re: [WISPA] [WISP] 900 PtP Have you tried going H rather than V or vicea-versa ? Yes. Try a ptp 900mhz at that range or to much noise for it ? Not detecting any. Could be a phone or something though. Something that comes and goes. This really seemed to start with a change in the weather though. Try something other than Trango ? Haven't tried that yet. I no have an option of building a two hope ptp link via a third location. This would allow me to go around the trees all together, but it would also introduce another point of failure. The best part? There are only 15 subs off of this system, I'm not sure how much I'm willing to spend here just yet. Especially since we end up with so much lightning damage every year (no way around it, we already have all the protection we can get). This is in a huge storm corridor. marlon -- Original Message -- From: "Marlon K. Schafer" Reply-To: w...@part-15.org Date: Tue, 2 Jun 2009 22:09:33 -0700 I have a trango link that's only giving me 2 megs. Sometimes much less. The link is 2.3 or so miles. There are TWO pine trees in the way. What would you guys use? I need to get more speed to the remote tower. thanks, marlon - Original Message - From: "RickG" To: Sent: Thursday, May 28, 2009 8:47 PM Subject: Re: [WISP] 900 PtP I just did this set up for a customer. Unfortunately they have ltos of pine trees. The panels didnt cut it and neither did yagis. Big grids did the trick. -RickG On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: Mikrotik xr9's with arc wireless panels If the link budget supports them. Throw in 411a boards and you have a sweet setup. Justin -- Justin Wilson From: Jeremy Grip Sent: Thursday, May 28, 2009 7:06 PM To: w...@part-15.org Subject: [WISP] 900 PtP Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at the far end. Should give me as much BW as possible, support most flavors of QOS for VoIP, and price matters. TIA, Jeremy Grip North Branch Networks, LLC Sent via the WebMail system at avolve.net WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 05:53:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
LOL I don't have a Stihl. I have a Pulan and an Echo though! hehehehe It would sure be nice to be able to do that! marlon - Original Message - From: "Rick Harnish" To: "'WISPA General List'" Sent: Wednesday, June 03, 2009 9:09 AM Subject: Re: [WISPA] [WISP] 900 PtP > Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for > link integrity! :) > > -Original Message- > From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On > Behalf Of Marlon K. Schafer > Sent: Wednesday, June 03, 2009 11:28 AM > To: w...@part-15.org > Cc: WISPA General List > Subject: Re: [WISPA] [WISP] 900 PtP > > > > >> Have you tried going H rather than V or vicea-versa ? > > Yes. > >> Try a ptp 900mhz at that range or to much noise for it ? > > Not detecting any. Could be a phone or something though. Something that > comes and goes. This really seemed to start with a change in the weather > though. > >> Try something other than Trango ? > > Haven't tried that yet. > > I no have an option of building a two hope ptp link via a third location. > This would allow me to go around the trees all together, but it would also > introduce another point of failure. The best part? There are only 15 > subs > off of this system, I'm not sure how much I'm willing to spend here just > yet. Especially since we end up with so much lightning damage every year > (no way around it, we already have all the protection we can get). This > is > in a huge storm corridor. > > marlon > >> >> -- Original Message -- >> From: "Marlon K. Schafer" >> Reply-To: w...@part-15.org >> Date: Tue, 2 Jun 2009 22:09:33 -0700 >> >>>I have a trango link that's only giving me 2 megs. Sometimes much less. >>>The link is 2.3 or so miles. There are TWO pine trees in the way. >>> >>>What would you guys use? I need to get more speed to the remote tower. >>> >>>thanks, >>>marlon >>> >>>- Original Message - >>>From: "RickG" >>>To: >>>Sent: Thursday, May 28, 2009 8:47 PM >>>Subject: Re: [WISP] 900 PtP >>> >>> >>>I just did this set up for a customer. Unfortunately they have ltos of >>>pine trees. The panels didnt cut it and neither did yagis. Big grids >>>did the trick. >>>-RickG >>> >>>On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: >>>> Mikrotik xr9's with arc wireless panels If the link budget supports >>>> them. >>>> Throw in 411a boards and you have a sweet setup. >>>> >>>> Justin >>>> >>>> >>>> -- >>>> Justin Wilson >>>> >>>> >>>> From: Jeremy Grip >>>> Sent: Thursday, May 28, 2009 7:06 PM >>>> To: w...@part-15.org >>>> Subject: [WISP] 900 PtP >>>> >>>> Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at >>>> the >>>> far end. Should give me as much BW as possible, support most flavors of >>>> QOS >>>> for VoIP, and price matters. >>>> >>>> TIA, >>>> >>>> Jeremy Grip >>>> North Branch Networks, LLC >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> >> >> >> >> >> Sent via the WebMail system at avolve.net >> >> >> >> > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 > 05:53:00 > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
Have you tried the MS 880 STIHL MagnumT Chain Saw. It will do wonders for link integrity! :) -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Marlon K. Schafer Sent: Wednesday, June 03, 2009 11:28 AM To: w...@part-15.org Cc: WISPA General List Subject: Re: [WISPA] [WISP] 900 PtP > Have you tried going H rather than V or vicea-versa ? Yes. > Try a ptp 900mhz at that range or to much noise for it ? Not detecting any. Could be a phone or something though. Something that comes and goes. This really seemed to start with a change in the weather though. > Try something other than Trango ? Haven't tried that yet. I no have an option of building a two hope ptp link via a third location. This would allow me to go around the trees all together, but it would also introduce another point of failure. The best part? There are only 15 subs off of this system, I'm not sure how much I'm willing to spend here just yet. Especially since we end up with so much lightning damage every year (no way around it, we already have all the protection we can get). This is in a huge storm corridor. marlon > > -- Original Message -- > From: "Marlon K. Schafer" > Reply-To: w...@part-15.org > Date: Tue, 2 Jun 2009 22:09:33 -0700 > >>I have a trango link that's only giving me 2 megs. Sometimes much less. >>The link is 2.3 or so miles. There are TWO pine trees in the way. >> >>What would you guys use? I need to get more speed to the remote tower. >> >>thanks, >>marlon >> >>- Original Message - >>From: "RickG" >>To: >>Sent: Thursday, May 28, 2009 8:47 PM >>Subject: Re: [WISP] 900 PtP >> >> >>I just did this set up for a customer. Unfortunately they have ltos of >>pine trees. The panels didnt cut it and neither did yagis. Big grids >>did the trick. >>-RickG >> >>On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: >>> Mikrotik xr9's with arc wireless panels If the link budget supports >>> them. >>> Throw in 411a boards and you have a sweet setup. >>> >>> Justin >>> >>> >>> -- >>> Justin Wilson >>> >>> >>> From: Jeremy Grip >>> Sent: Thursday, May 28, 2009 7:06 PM >>> To: w...@part-15.org >>> Subject: [WISP] 900 PtP >>> >>> Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at >>> the >>> far end. Should give me as much BW as possible, support most flavors of >>> QOS >>> for VoIP, and price matters. >>> >>> TIA, >>> >>> Jeremy Grip >>> North Branch Networks, LLC >>> >>> >>> >>> >>> >>> >> >> > > > > > > > Sent via the WebMail system at avolve.net > > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.51/2151 - Release Date: 06/03/09 05:53:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
> Have you tried going H rather than V or vicea-versa ? Yes. > Try a ptp 900mhz at that range or to much noise for it ? Not detecting any. Could be a phone or something though. Something that comes and goes. This really seemed to start with a change in the weather though. > Try something other than Trango ? Haven't tried that yet. I no have an option of building a two hope ptp link via a third location. This would allow me to go around the trees all together, but it would also introduce another point of failure. The best part? There are only 15 subs off of this system, I'm not sure how much I'm willing to spend here just yet. Especially since we end up with so much lightning damage every year (no way around it, we already have all the protection we can get). This is in a huge storm corridor. marlon > > -- Original Message -- > From: "Marlon K. Schafer" > Reply-To: w...@part-15.org > Date: Tue, 2 Jun 2009 22:09:33 -0700 > >>I have a trango link that's only giving me 2 megs. Sometimes much less. >>The link is 2.3 or so miles. There are TWO pine trees in the way. >> >>What would you guys use? I need to get more speed to the remote tower. >> >>thanks, >>marlon >> >>- Original Message - >>From: "RickG" >>To: >>Sent: Thursday, May 28, 2009 8:47 PM >>Subject: Re: [WISP] 900 PtP >> >> >>I just did this set up for a customer. Unfortunately they have ltos of >>pine trees. The panels didnt cut it and neither did yagis. Big grids >>did the trick. >>-RickG >> >>On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: >>> Mikrotik xr9's with arc wireless panels If the link budget supports >>> them. >>> Throw in 411a boards and you have a sweet setup. >>> >>> Justin >>> >>> >>> -- >>> Justin Wilson >>> >>> >>> From: Jeremy Grip >>> Sent: Thursday, May 28, 2009 7:06 PM >>> To: w...@part-15.org >>> Subject: [WISP] 900 PtP >>> >>> Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at >>> the >>> far end. Should give me as much BW as possible, support most flavors of >>> QOS >>> for VoIP, and price matters. >>> >>> TIA, >>> >>> Jeremy Grip >>> North Branch Networks, LLC >>> >>> >>> >>> >>> >>> >> >> > > > > > > > Sent via the WebMail system at avolve.net > > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
check out the ligowave stuffif not then probably an XR9 like mentioned below leon * Marlon K. Schafer wrote, On 6/3/2009 1:09 AM: I have a trango link that's only giving me 2 megs. Sometimes much less. The link is 2.3 or so miles. There are TWO pine trees in the way. What would you guys use? I need to get more speed to the remote tower. thanks, marlon - Original Message - From: "RickG" To: Sent: Thursday, May 28, 2009 8:47 PM Subject: Re: [WISP] 900 PtP I just did this set up for a customer. Unfortunately they have ltos of pine trees. The panels didnt cut it and neither did yagis. Big grids did the trick. -RickG On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: Mikrotik xr9's with arc wireless panels If the link budget supports them. Throw in 411a boards and you have a sweet setup. Justin -- Justin Wilson From: Jeremy Grip Sent: Thursday, May 28, 2009 7:06 PM To: w...@part-15.org Subject: [WISP] 900 PtP Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at the far end. Should give me as much BW as possible, support most flavors of QOS for VoIP, and price matters. TIA, Jeremy Grip North Branch Networks, LLC No virus found in this outgoing message. Checked by AVG - www.avg.com Version: 8.5.339 / Virus Database: 270.12.52/2152 - Release Date: 06/03/09 05:53:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] [WISP] 900 PtP
I have a trango link that's only giving me 2 megs. Sometimes much less. The link is 2.3 or so miles. There are TWO pine trees in the way. What would you guys use? I need to get more speed to the remote tower. thanks, marlon - Original Message - From: "RickG" To: Sent: Thursday, May 28, 2009 8:47 PM Subject: Re: [WISP] 900 PtP I just did this set up for a customer. Unfortunately they have ltos of pine trees. The panels didnt cut it and neither did yagis. Big grids did the trick. -RickG On Thu, May 28, 2009 at 8:08 PM, Justin Wilson wrote: > Mikrotik xr9's with arc wireless panels If the link budget supports them. > Throw in 411a boards and you have a sweet setup. > > Justin > > > -- > Justin Wilson > > > From: Jeremy Grip > Sent: Thursday, May 28, 2009 7:06 PM > To: w...@part-15.org > Subject: [WISP] 900 PtP > > Anyone have any suggestions for a 900 PtP link? 2.5 miles, 25% trees at > the > far end. Should give me as much BW as possible, support most flavors of > QOS > for VoIP, and price matters. > > TIA, > > Jeremy Grip > North Branch Networks, LLC > > > > > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/