Re: [WISPA] Bullet M5 for 802.11a??
We have used Nanobridge M5s and Rocket M5s to connect to StarOS 802.11 G and A access points without issue, both WEP and WPA. The only "gotcha" is that we had some difficulty in forcing specific TX rates on 802.11N devices. So far we haven't figured out a way to force a TX rate, we must leave the CPE on "automatic". On 08/03/2010 01:51 PM, Mathew Howard wrote: > > We have several of them connected to StarOS radios at 10mhz with no > problems – I haven’t tried it with anything else though. > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] > *On Behalf Of *rabbtux rabbtux > *Sent:* Tuesday, August 03, 2010 1:35 PM > *To:* WISPA General List > *Subject:* Re: [WISPA] Bullet M5 for 802.11a?? > > devil is in details, I need 10Mhz channel and simple 64bit WEP to work > if this is to match the system its replacing. any ideas?? > > On Tue, Aug 3, 2010 at 10:23 AM, Mathew Howard <mailto:mat...@litewire.net>> wrote: > > You can’t set them to A only, but any A stuff that I’ve tried works > fine with them in A/N mixed mode. > > *From:* wireless-boun...@wispa.org <mailto:wireless-boun...@wispa.org> > [mailto:wireless-boun...@wispa.org > <mailto:wireless-boun...@wispa.org>] *On Behalf Of *rabbtux rabbtux > *Sent:* Tuesday, August 03, 2010 11:30 AM > *To:* WISPA General List > *Subject:* Re: [WISPA] Bullet M5 for 802.11a?? > > I guess the question is best put as: Can I configure/modify a Bullet > M5 to work with nanostation 5s?? > > On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman > mailto:j...@imaginenetworksllc.com>> wrote: > > If it was like the other airmax great you need at least 5.2ish for A. > > On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" <mailto:rabb...@gmail.com>> wrote: > > may be a dumb question, but is it possible to use a bullet M5 for > normal 802.11a on 5.8 GHz? Is there a different firmware image to > upload? > > Thanks, > marshall > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org <mailto:wireless@wispa.org> > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org <mailto:wireless@wispa.org> > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org <mailto:wireless@wispa.org> > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
We have several of them connected to StarOS radios at 10mhz with no problems - I haven't tried it with anything else though. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of rabbtux rabbtux Sent: Tuesday, August 03, 2010 1:35 PM To: WISPA General List Subject: Re: [WISPA] Bullet M5 for 802.11a?? devil is in details, I need 10Mhz channel and simple 64bit WEP to work if this is to match the system its replacing. any ideas?? On Tue, Aug 3, 2010 at 10:23 AM, Mathew Howard wrote: You can't set them to A only, but any A stuff that I've tried works fine with them in A/N mixed mode. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of rabbtux rabbtux Sent: Tuesday, August 03, 2010 11:30 AM To: WISPA General List Subject: Re: [WISPA] Bullet M5 for 802.11a?? I guess the question is best put as: Can I configure/modify a Bullet M5 to work with nanostation 5s?? On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman wrote: If it was like the other airmax great you need at least 5.2ish for A. On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: may be a dumb question, but is it possible to use a bullet M5 for normal 802.11a on 5.8 GHz? Is there a different firmware image to upload? Thanks, marshall WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
looks good, just uploaded latest firmware 5.2.n my M5 bullet from last year had version 5.02 It appears to support all the settings i mentioned! On Tue, Aug 3, 2010 at 11:35 AM, rabbtux rabbtux wrote: > devil is in details, I need 10Mhz channel and simple 64bit WEP to work if > this is to match the system its replacing. any ideas?? > > > > On Tue, Aug 3, 2010 at 10:23 AM, Mathew Howard wrote: > >> You can’t set them to A only, but any A stuff that I’ve tried works fine >> with them in A/N mixed mode. >> >> >> >> *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On >> Behalf Of *rabbtux rabbtux >> *Sent:* Tuesday, August 03, 2010 11:30 AM >> *To:* WISPA General List >> *Subject:* Re: [WISPA] Bullet M5 for 802.11a?? >> >> >> >> I guess the question is best put as: Can I configure/modify a Bullet M5 >> to work with nanostation 5s?? >> >> On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman >> wrote: >> >> If it was like the other airmax great you need at least 5.2ish for A. >> >> On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: >> >> may be a dumb question, but is it possible to use a bullet M5 for normal >> 802.11a on 5.8 GHz? Is there a different firmware image to upload? >> >> Thanks, >> marshall >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> >> >> >> >> >> >> >> WISPA Wants You! Join today! >> http://signup.wispa.org/ >> >> >> >> WISPA Wireless List: wireless@wispa.org >> >> Subscribe/Unsubscribe: >> http://lists.wispa.org/mailman/listinfo/wireless >> >> Archives: http://lists.wispa.org/pipermail/wireless/ >> > > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
devil is in details, I need 10Mhz channel and simple 64bit WEP to work if this is to match the system its replacing. any ideas?? On Tue, Aug 3, 2010 at 10:23 AM, Mathew Howard wrote: > You can’t set them to A only, but any A stuff that I’ve tried works fine > with them in A/N mixed mode. > > > > *From:* wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] *On > Behalf Of *rabbtux rabbtux > *Sent:* Tuesday, August 03, 2010 11:30 AM > *To:* WISPA General List > *Subject:* Re: [WISPA] Bullet M5 for 802.11a?? > > > > I guess the question is best put as: Can I configure/modify a Bullet M5 to > work with nanostation 5s?? > > On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman > wrote: > > If it was like the other airmax great you need at least 5.2ish for A. > > On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: > > may be a dumb question, but is it possible to use a bullet M5 for normal > 802.11a on 5.8 GHz? Is there a different firmware image to upload? > > Thanks, > marshall > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
You can't set them to A only, but any A stuff that I've tried works fine with them in A/N mixed mode. From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of rabbtux rabbtux Sent: Tuesday, August 03, 2010 11:30 AM To: WISPA General List Subject: Re: [WISPA] Bullet M5 for 802.11a?? I guess the question is best put as: Can I configure/modify a Bullet M5 to work with nanostation 5s?? On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman wrote: If it was like the other airmax great you need at least 5.2ish for A. On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: may be a dumb question, but is it possible to use a bullet M5 for normal 802.11a on 5.8 GHz? Is there a different firmware image to upload? Thanks, marshall WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
Pretty sure you can, but I have not personally tested that. On Aug 3, 2010 12:31 PM, "rabbtux rabbtux" wrote: I guess the question is best put as: Can I configure/modify a Bullet M5 to work with nanostation 5s?? On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman wrote: > > If it was li... WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
I guess the question is best put as: Can I configure/modify a Bullet M5 to work with nanostation 5s?? On Tue, Aug 3, 2010 at 8:50 AM, Josh Luthman wrote: > If it was like the other airmax great you need at least 5.2ish for A. > > On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: > > may be a dumb question, but is it possible to use a bullet M5 for normal > 802.11a on 5.8 GHz? Is there a different firmware image to upload? > > Thanks, > marshall > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > > > > > > > WISPA Wants You! Join today! > http://signup.wispa.org/ > > > > WISPA Wireless List: wireless@wispa.org > > Subscribe/Unsubscribe: > http://lists.wispa.org/mailman/listinfo/wireless > > Archives: http://lists.wispa.org/pipermail/wireless/ > WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Bullet M5 for 802.11a??
If it was like the other airmax great you need at least 5.2ish for A. On Aug 3, 2010 11:41 AM, "rabbtux rabbtux" wrote: may be a dumb question, but is it possible to use a bullet M5 for normal 802.11a on 5.8 GHz? Is there a different firmware image to upload? Thanks, marshall WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
[WISPA] Bullet M5 for 802.11a??
may be a dumb question, but is it possible to use a bullet M5 for normal 802.11a on 5.8 GHz? Is there a different firmware image to upload? Thanks, marshall WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
