Hi,
I use this quite a bit... it's quick and easy:
http://www.wisp-router.com/calculators/downtilt.php
If it were me, I would probably set them at 2-3 degrees downtilt.
Travis
Microserv
Ryan Langseth wrote:
I have been meaning to ask this for a while. How does everyone figure
their downtilt? Do you tilt down slightly more or less than 1/2 the
vertical beamwidth? No downtilt? Anything else?
As a real world example:
We are re-deploying a tower and are moving from an omni to sectors, we
are putting up tranzeo 13 db 120 degree sectors, with 13 degrees
vertical beamwidth. The height of our equipment is about 220 ft, over
pretty flat terrain. With such a setup, what would you do for the
downtilt?
Thanks,
Ryan
** Join us at the WISPA Reception at 6:30 PM on October the 16th 2007 at ISPCON
**
** ISPCON Fall 2007 - October 16-18 - San Jose, CA www.ispcon.com **
** THE INTERNET INDUSTRY EVENT **
** FREE Exhibits and Events Pass available until August 31 **
** Use Customer Code WSEMF7 when you register online at
http://www.ispcon.com/register.php **
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
** Join us at the WISPA Reception at 6:30 PM on October the 16th 2007 at ISPCON
**
** ISPCON Fall 2007 - October 16-18 - San Jose, CA www.ispcon.com **
** THE INTERNET INDUSTRY EVENT **
** FREE Exhibits and Events Pass available until August 31 **
** Use Customer Code WSEMF7 when you register online at
http://www.ispcon.com/register.php **
WISPA Wants You! Join today!
http://signup.wispa.org/
WISPA Wireless List: wireless@wispa.org
Subscribe/Unsubscribe:
http://lists.wispa.org/mailman/listinfo/wireless
Archives: http://lists.wispa.org/pipermail/wireless/
