Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
We had similar issues with the Engenius/Senao EOC-2610 outdoor ap. What seems to have finally fixed it for us was loading DD-WRT to them. On 12/8/09 12:30 AM, Scottie Arnett sarn...@info-ed.com wrote: I have not used the Engenius 3610 personally, but I have used the 400mW versions in outdoor and indoor environments. I found that any surge in power, either from lightning, or brown outs, would set them to factory defaults. Have you tried accessing them through the factory default settings to see if you could access them via wired? I gave up on these unit's after a year of trying to make them work out in any situation. Scottie -- Original Message -- From: Josh Luthman j...@imaginenetworksllc.com Reply-To: WISPA General List wireless@wispa.org Date: Mon, 7 Dec 2009 14:52:46 -0500 If you can't see the 2.4 spectrum then the device simply locked up. What is causing it sounds like a bug to me. One simple broadcast packet nails several of the radios and freaks them out. Do you have the latest firmware for them? In the past these radios would lose their config if they had to switch modes (that is, if the default mode out of the box is bridge you will lose the config - if the default mode out of the box is AP you're safe). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 2:49 PM, Alan Long alan.l...@aerowire.net wrote: Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
Thanks Scottie,,, We have the power company coming out also to check power. That was my first thought was brown out. This site has had power issues in the past. I did have one radio out of the bunch that had reset back to defaults. So far no packet storms detected, nor any more issues with failing radios. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Scottie Arnett Sent: Monday, December 07, 2009 11:31 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi I have not used the Engenius 3610 personally, but I have used the 400mW versions in outdoor and indoor environments. I found that any surge in power, either from lightning, or brown outs, would set them to factory defaults. Have you tried accessing them through the factory default settings to see if you could access them via wired? I gave up on these unit's after a year of trying to make them work out in any situation. Scottie -- Original Message -- From: Josh Luthman j...@imaginenetworksllc.com Reply-To: WISPA General List wireless@wispa.org Date: Mon, 7 Dec 2009 14:52:46 -0500 If you can't see the 2.4 spectrum then the device simply locked up. What is causing it sounds like a bug to me. One simple broadcast packet nails several of the radios and freaks them out. Do you have the latest firmware for them? In the past these radios would lose their config if they had to switch modes (that is, if the default mode out of the box is bridge you will lose the config - if the default mode out of the box is AP you're safe). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 2:49 PM, Alan Long alan.l...@aerowire.net wrote: Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.709 / Virus Database: 270.14.97/2550 - Release Date: 12/07/09 01:33:00 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
If you can't see the 2.4 spectrum then the device simply locked up. What is causing it sounds like a bug to me. One simple broadcast packet nails several of the radios and freaks them out. Do you have the latest firmware for them? In the past these radios would lose their config if they had to switch modes (that is, if the default mode out of the box is bridge you will lose the config - if the default mode out of the box is AP you're safe). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 2:49 PM, Alan Long alan.l...@aerowire.net wrote: Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
All the configs were fine after reboot. I do have the latest firmware on all of them. I even reloaded the firmware on a few of them and still had them lock up. Since going to router in front of them, they are working ok. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:53 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi If you can't see the 2.4 spectrum then the device simply locked up. What is causing it sounds like a bug to me. One simple broadcast packet nails several of the radios and freaks them out. Do you have the latest firmware for them? In the past these radios would lose their config if they had to switch modes (that is, if the default mode out of the box is bridge you will lose the config - if the default mode out of the box is AP you're safe). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 2:49 PM, Alan Long alan.l...@aerowire.net wrote: Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239
Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi
I have not used the Engenius 3610 personally, but I have used the 400mW versions in outdoor and indoor environments. I found that any surge in power, either from lightning, or brown outs, would set them to factory defaults. Have you tried accessing them through the factory default settings to see if you could access them via wired? I gave up on these unit's after a year of trying to make them work out in any situation. Scottie -- Original Message -- From: Josh Luthman j...@imaginenetworksllc.com Reply-To: WISPA General List wireless@wispa.org Date: Mon, 7 Dec 2009 14:52:46 -0500 If you can't see the 2.4 spectrum then the device simply locked up. What is causing it sounds like a bug to me. One simple broadcast packet nails several of the radios and freaks them out. Do you have the latest firmware for them? In the past these radios would lose their config if they had to switch modes (that is, if the default mode out of the box is bridge you will lose the config - if the default mode out of the box is AP you're safe). Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 2:49 PM, Alan Long alan.l...@aerowire.net wrote: Can't connect via wifi or Ethernet, can't see it via 2.4. I have the sniffer going now. Aerowire Alan Long Director of Network Operations alan.l...@aerowire.net 687 North Dean Road Auburn, AL 36830 tel: 3342759998 mobile: 336092 -Original Message- From: wireless-boun...@wispa.org [mailto:wireless-boun...@wispa.org] On Behalf Of Josh Luthman Sent: Monday, December 07, 2009 1:38 PM To: WISPA General List Subject: Re: [WISPA] Engenius 3610 indoor ap losing etehrnet and wifi When you say no wifi does that mean you can not connect to the AP or that your laptop doesn't see the AP broadcasting in 2.4? I would have to guess packet storm as well. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 The secret to creativity is knowing how to hide your sources. --- Albert Einstein On Mon, Dec 7, 2009 at 12:32 PM, Scott Reed scottr...@onlyinternet.netwrote: Broadcast storm? Alan Long wrote: I have a site where we deployed approx 45 engenius indoor 3610 deployed in 26 buildings. They are all in ap mode only and have a hardwire connection back to my main outbound internet gateway. They are all on the same subnet for management, and the users are on different subnet for their access out. Just all layer 2 between them and the gateway, with no vlans. The Tuesday before Thanksgiving we had almost all the radios to go down, had no wifi nor Ethernet. We rebooted all units and they came right back up and worked for several days and then same issue. I have since put each building with a router between the radios and my gateway and have only had a few lockup since that time. Anyone have any ideas on what may be causing these issues? I have one of the units at my office, hooked on the network and can't get it to lock up, and it was one of the units that locked up. http://www.aerowire.net Alan Long Director of Network Operations Aerowire http://maps.yahoo.com/py/maps.py?Pyt=Tmapaddr=687+North+Dean+Roadcsz=Aubu rn%2C+AL+36830country=us 687 North Dean Road Auburn, AL 36830 mailto:alan.l...@aerowire.net alan.l...@aerowire.net tel: mobile: http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=3342759998E mail=along5...@yahoo.com 3342759998 http://www.plaxo.com/click_to_call?lang=ensrc=jj_signatureTo=336092E mail=along5...@yahoo.com 336092 https://www.plaxo.com/add_me?u=30065206883src=client_sig_212_1_card_joini nvite=1=en Always have my latest info http://www.plaxo.com/signature?src=client_sig_212_1_card_sig=en Want a signature like this? WISPA Wants You! Join today! http://signup.wispa.org/ WISPA Wireless List: wireless@wispa.org Subscribe/Unsubscribe: http://lists.wispa.org/mailman/listinfo/wireless Archives: http://lists.wispa.org/pipermail/wireless/ -- Scott Reed Sr. Systems Engineer GAB Midwest 1-800-363-1544 x4000 Cell: 260-273-7239 WISPA Wants You! Join today! http://signup.wispa.org
