Re: [WISPA] Maxxwave x86 router ethernet port problem

[David Jones]

We had the exact same problem. MT really doesn't keep up on the x86 stuff.
What we did to patch it was set both sides to 1g full and turn off auto
negotiate. Seemed to get us by.

On Thu, Jun 1, 2017 at 7:15 PM, Faisal Imtiaz 
wrote:

> I have not seen this issue on any of our i7 x86 routers...
>
> A few questions:-
>
> What is connected to these Ethernet ports ?  any surge protectors in the
> middle ?
> Disabling them and enabling them have any effect ?
> Doing a physical disconnect or reconnect have any affect ?
>
>
> When did the problem start ?
>
> This sounds like a hardware problem more than anything else (i.e. not a
> software issue).
>
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232 <(305)%20663-5518>
>
> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email:
> supp...@snappytelecom.net
>
> --
>
> *From: *"Chris Fabien" 
> *To: *"WISPA General List" 
> *Sent: *Thursday, June 1, 2017 4:28:53 PM
> *Subject: *[WISPA] Maxxwave x86 router ethernet port problem
>
> We have a maxxwave i7 x86 router from Baltic Networks. What I'm seeing is
> a problem where the ethernet ports stop working one at a time. The remote
> side will still show a 1G link but the router either shows 10Meg or No Link
> and no traffic will pass.
> This happens to the ports one at a time maybe once a week or so, until
> several are not working. Then I have to power cycle the router to get them
> all back working again.
>
> Running 6.32.3
>
> Is this just faulty hardware that I need to replace, or any other
> suggestions?
>
> Thanks
> Chris Fabien
> LakeNet LLC
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>
> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
>
>


-- 
David Jones
NGL Connection
307-288-5491 ext 702
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless

Re: [WISPA] Maxxwave x86 router ethernet port problem

[Faisal Imtiaz]

I have not seen this issue on any of our i7 x86 routers... 

A few questions:- 

What is connected to these Ethernet ports ? any surge protectors in the middle 
? 
Disabling them and enabling them have any effect ? 
Doing a physical disconnect or reconnect have any affect ? 

When did the problem start ? 

This sounds like a hardware problem more than anything else (i.e. not a 
software issue). 

Faisal Imtiaz 
Snappy Internet & Telecom 
7266 SW 48 Street 
Miami, FL 33155 
Tel: 305 663 5518 x 232 

Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net 

> From: "Chris Fabien" 
> To: "WISPA General List" 
> Sent: Thursday, June 1, 2017 4:28:53 PM
> Subject: [WISPA] Maxxwave x86 router ethernet port problem

> We have a maxxwave i7 x86 router from Baltic Networks. What I'm seeing is a
> problem where the ethernet ports stop working one at a time. The remote side
> will still show a 1G link but the router either shows 10Meg or No Link and no
> traffic will pass.
> This happens to the ports one at a time maybe once a week or so, until several
> are not working. Then I have to power cycle the router to get them all back
> working again.

> Running 6.32.3

> Is this just faulty hardware that I need to replace, or any other suggestions?

> Thanks
> Chris Fabien
> LakeNet LLC

> ___
> Wireless mailing list
> Wireless@wispa.org
> http://lists.wispa.org/mailman/listinfo/wireless
___
Wireless mailing list
Wireless@wispa.org
http://lists.wispa.org/mailman/listinfo/wireless