Re: [Wireshark-dev] U3 package fails to install
Clifford Thrasher wrote: > Graham Bloice wrote: >> Graeme Lunt wrote: >> >>> Hi, >>> >>> Graham Bloice wrote: > I built a U3 version from SVN 20915, but the resulting .u3p fails to > install on my SanDisk MicroCruzer. > >>> Does the package downloaded from: >>> http://prdownloads.sourceforge.net/wireshark/wireshark-0.99.5.u3p >>> >>> install OK? >>> >>> >> >> Yes it does, without an icon as has been discussed previously. >> >> > When I run the U3 add programs applet, it reports: > > U3 Launchpad failed to install U3 program, due to a > possible error in the program package. Try downloading and installing > the program again. > If the problem persists, contact the program software vendor. > > The version of U3 Launchpad in use is 1.4.0.2 > > I'm also unable to install either a home built version from the latest SVN (20933) or the buildbot version of the same. >>> I have seen this sort of error when the manifest.u3i file is corrupt. >>> >>> Have a look at the file in packaging/u3/win32/manifest - or extract it from >>> the u3p using a zip tool. >>> Does it look OK? >>> >>> >> >> The one in my working copy looks fine, it seems to be well formed XML, I >> assume the actual content is correct. >> >> > Hi Graham, I know its been over a month, but I tried to build a U3 > package myself and ran into the same error. I fixed it by going into > the packaging\u3\win32 directory once the u3p file is complete, from > there I created my own archive. I added the data, device, host and > manifest directories to a zip archive with zero compression. Then I > renamed that zip archive to the desired u3p filename. The U3 program > took the handmade archive with no problems. > I think Graeme L checked in a fix, as I subsequently did manage to build a u3p package. I haven't tried for a month or so though. -- Regards, Graham Bloice ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
Re: [Wireshark-dev] U3 package fails to install
Graham Bloice wrote: Graeme Lunt wrote: Hi, Graham Bloice wrote: I built a U3 version from SVN 20915, but the resulting .u3p fails to install on my SanDisk MicroCruzer. Does the package downloaded from: http://prdownloads.sourceforge.net/wireshark/wireshark-0.99.5.u3p install OK? Yes it does, without an icon as has been discussed previously. When I run the U3 add programs applet, it reports: U3 Launchpad failed to install U3 program, due to a possible error in the program package. Try downloading and installing the program again. If the problem persists, contact the program software vendor. The version of U3 Launchpad in use is 1.4.0.2 I'm also unable to install either a home built version from the latest SVN (20933) or the buildbot version of the same. I have seen this sort of error when the manifest.u3i file is corrupt. Have a look at the file in packaging/u3/win32/manifest - or extract it from the u3p using a zip tool. Does it look OK? The one in my working copy looks fine, it seems to be well formed XML, I assume the actual content is correct. Hi Graham, I know its been over a month, but I tried to build a U3 package myself and ran into the same error. I fixed it by going into the packaging\u3\win32 directory once the u3p file is complete, from there I created my own archive. I added the data, device, host and manifest directories to a zip archive with zero compression. Then I renamed that zip archive to the desired u3p filename. The U3 program took the handmade archive with no problems. Cliff ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
Re: [Wireshark-dev] U3 package fails to install
Graham, > >> Graham Bloice wrote: > >>> I built a U3 version from SVN 20915, but the resulting > >>> .u3p fails to install on my SanDisk MicroCruzer. The problem is that if VERSION_EXTRA was set in config.nmake (e.g. to "-SVN-20933") this would lead to an invalid version in the manifest.u3i file. So as a workaround you can unset VERSION_EXTRA in config.nmake However, I have just checked in a change (20957) which generates a valid version of the manifest file. So buildbot generated packages after this version should be OK. Thanks, Graeme ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
Re: [Wireshark-dev] U3 package fails to install
Graeme Lunt wrote: > Hi, > >> Graham Bloice wrote: >>> I built a U3 version from SVN 20915, but the resulting .u3p fails to >>> install on my SanDisk MicroCruzer. > > Does the package downloaded from: > http://prdownloads.sourceforge.net/wireshark/wireshark-0.99.5.u3p > > install OK? > Yes it does, without an icon as has been discussed previously. >>> When I run the U3 add programs applet, it reports: >>> >>> U3 Launchpad failed to install U3 program, due to a >>> possible error in the program package. Try downloading and installing >>> the program again. >>> If the problem persists, contact the program software vendor. >>> >>> The version of U3 Launchpad in use is 1.4.0.2 >>> >> I'm also unable to install either a home built version from the latest >> SVN (20933) or the buildbot version of the same. > > I have seen this sort of error when the manifest.u3i file is corrupt. > > Have a look at the file in packaging/u3/win32/manifest - or extract it from > the u3p using a zip tool. > Does it look OK? > The one in my working copy looks fine, it seems to be well formed XML, I assume the actual content is correct. -- Regards, Graham Bloice Software Developer Trihedral UK Limited Tel: +44 (0)7002 874433 ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
Re: [Wireshark-dev] U3 package fails to install
Hi, > Graham Bloice wrote: > > I built a U3 version from SVN 20915, but the resulting .u3p fails to > > install on my SanDisk MicroCruzer. Does the package downloaded from: http://prdownloads.sourceforge.net/wireshark/wireshark-0.99.5.u3p install OK? > > When I run the U3 add programs applet, it reports: > > > > U3 Launchpad failed to install U3 program, due to a > > possible error in the program package. Try downloading and installing > > the program again. > > If the problem persists, contact the program software vendor. > > > > The version of U3 Launchpad in use is 1.4.0.2 > > > > I'm also unable to install either a home built version from the latest > SVN (20933) or the buildbot version of the same. I have seen this sort of error when the manifest.u3i file is corrupt. Have a look at the file in packaging/u3/win32/manifest - or extract it from the u3p using a zip tool. Does it look OK? Graeme ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
Re: [Wireshark-dev] U3 package fails to install
Graham Bloice wrote: > I built a U3 version from SVN 20915, but the resulting .u3p fails to > install on my SanDisk MicroCruzer. > > When I run the U3 add programs applet, it reports: > > U3 Launchpad failed to install U3 program, due to a possible error in > the program package. Try downloading and installing the program again. > If the problem persists, contact the program software vendor. > > The version of U3 Launchpad in use is 1.4.0.2 > I'm also unable to install either a home built version from the latest SVN (20933) or the buildbot version of the same. -- Regards, Graham Bloice Software Developer Trihedral UK Limited Tel: +44 (0)7002 874433 ___ Wireshark-dev mailing list Wireshark-dev@wireshark.org http://www.wireshark.org/mailman/listinfo/wireshark-dev
