It has been fixed. Just need to install the new dll.
New hamlib for Windows installation directions#1 Shut down WSJTX#2 Download
either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but
may warn you multiple times.If you can do a "Save As" you can save it directly
in \WSJT\WSJTX\bin and replace the libhamlib-4.dll that is
there.http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dllhttp://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll#3
If you don't save directly you need to open a file browser and move the file
that way.If you're not familiar with that here's a video on the file
browser.https://www.youtube.com/watch?v=AyVqCJrs9dk
Mike W9MDB
On Thursday, November 18, 2021, 10:23:36 PM CST, Bob McCormick via
wsjt-devel wrote:
This evening I upgraded the NC1I 23cm EME station from v2.5.1 to v2.5.2 and
encountered some problems:
- a 3 to 4 second delay before TX is enabled - this acts like a problem we saw
on the 70cm station some weeks back and was fixed (regression?)
- rig control doppler TX and RX rig frequencies do not seem correct
Additionally - in v2.5.2 clicking the Tune button has a noticeable delay,
whereas the 70cm station with v2.5.1 the tune is almost instantaneous.
Reinstalling v2.5.1 on top of the updated v2.5.2 version restored proper
functionality: keying is immediate and frequencies are correct.
CAT is to a microHAM microKeyer II that is connected to a K3
PTT is to a virtual COM port on the microHAM router that controls the K3
No settings were changed going back and forth between v2.5.1 and v2.5.2
I see Mike's previous posting in this list about a new hamlib package - I can
give that a try sometime, but tomorrow starts the EME contest so don't want to
make any more changes until after the contest.
Bob W1QA
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
