Re: [wsjt-devel] Polling Disable
Is there a way to disable cat polling in wsjtx config ini file etc? This is on a Catalina Macbook. I have a FT-747GX that poll reads +08 tail to set frequency > red freq band shows OOB etc but sets fine, basically the poll read frequency adds 08 to the tail of the number. 28.074 000 becomes 2,807.400 008 . The radio is showing correct frequency, so a program issue. I have found others mention this before in wsjtx group archives. Have tried a big range of wsjtx editions, and all the same result. I can set poll to 99 s , but would like to disable. I could set rig = none, but I have good cat control to set bands, and would like to retain that. The issue prevents me working split,as the huge number with shift is sent to the 747 which then displays err, game over. So I stay set over 1500 hz on pan 73 vk4tux ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Problem with WSJT-X 2.7.0 RC3 and Hamlib +Flrig
What rig? For some reason that call is not returning any value for your rig when getting the current mode. Mike W9MDB On Sunday, January 28, 2024 at 07:37:38 PM CST, Richard Shaw via wsjt-devel wrote: I decided to test out the RC3 release and everything comes up fine but as soon as I try to change TX frequency in the waterfall or make a contact I get something like this: Rig Control Error Hamlib error: Content-length: 168 xml_parse2: value returned='' xml_parse2: xml=' ' flrig_transaction: no value returned 4:flrig.c(600):flrig_transaction returning(8) 3:flrig.c(1701):flrig_get_mode returning(8) 2:flrig.c(2018):flrig_set_split_freq_mode returning(8) 1:rig_set_split_freq_mode: elapsed=22ms 1:rig.c(4843):rig_set_split_freq_mode returning(8) Protocol error Protocol error while setting split TX frequency and mode Timestamp: 2024-01-29T01:29:30.026Z --- - Everything I try in Flrig works perfectly. - Clicking the 1kc up and down arrows work fine in WSJT-X. - Test CAT and Test PTT in WSJT-X works fine. Thanks, Richard KF5OIM ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Problem with WSJT-X 2.7.0 RC3 and Hamlib +Flrig
I decided to test out the RC3 release and everything comes up fine but as soon as I try to change TX frequency in the waterfall or make a contact I get something like this: Rig Control Error Hamlib error: Content-length: 168 xml_parse2: value returned='' xml_parse2: xml=' ' flrig_transaction: no value returned 4:flrig.c(600):flrig_transaction returning(8) 3:flrig.c(1701):flrig_get_mode returning(8) 2:flrig.c(2018):flrig_set_split_freq_mode returning(8) 1:rig_set_split_freq_mode: elapsed=22ms 1:rig.c(4843):rig_set_split_freq_mode returning(8) Protocol error Protocol error while setting split TX frequency and mode Timestamp: 2024-01-29T01:29:30.026Z --- - Everything I try in Flrig works perfectly. - Clicking the 1kc up and down arrows work fine in WSJT-X. - Test CAT and Test PTT in WSJT-X works fine. Thanks, Richard KF5OIM ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel