[wsjt-devel] Fixed use two JT65B problem.
Hello Mike, Uwe and the wsjtx development team. I thank you for the supporting me. I was very sorry for asking such a strange question that had trouble JT65B of WSJT-X. I find the cause of in trouble of use two JT65B. In my case, the cause of my trouble was the USB3 port on my PC. I reported you about my situation and after that I will need using two JT65B on the EME then I installed two WSJT9 for two JT65B. And then my strange PC told me when I started the second WSJT9 that the PC said "Not Enough USB Controller Resources error message" You know that the cause of this error of the USB3. In my case, I do not need to use the USB3 port for my PC so I attached two USB sound cards on the USB2 port of my PC. But my PC was strange PC, I think probably they were recognized by the USB3 port with my PC. Therefore in my PC, I think the two USB sound cards were strange motion with use two JT65B. But I think my PC did not tell me that error when used two JT65B of WSJT-X. After that in my case, I changed the BIOS setting on my strange PC to not use USB3. Any way I am able to use two JT65B of WSJT-X to working well on my PC. And I am installing the JTDX APP but I have no problem until now. I thank you and your team so much again. Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X 09th Jan No2
Mike W9MDB and wsjtx development team. Thank you for your question. Yes, the Behringer UMC202HD sound card is working well. I tested the Asus U7 and the UMC202HD with two JT65B of WSJT-X on my PC. You are able to see in the attached picture of the Device manager of my PC. But I use input port only, for use H-pol input port of JT65B. Best Regard Taka, JP3EXR -Original Message- From: Black Michael Sent: Tuesday, January 9, 2024 1:25 PM To: wsjt-devel@lists.sourceforge.net; JP3EXR Subject: Re: I have in trouble JT65B of WSJT-X 09th Jan No2 So I see a Behringer sound card. Does this setup work or not? Mike W9MDB On Monday, January 8, 2024 at 09:04:58 PM CST, JP3EXR wrote: Hi Mike and the wsjt development team. Thank you for supporting me. Sorry I was unable to send two attached picture of my result because my previous email was the overflow. I attached 2 files of my test result. Best regard Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X 08th Jan
Hi Mike and the wsjt development team. Thank you for the suggestion about my system. I tested the USB sound cards of JT65 with not used the linear amp today. So probably TX output was 25W. I install an isolation unit and a Ferrite Core Clamp between the PC and the 4P HUB that connects the ASUS U7 and Sound Blaster HD right now. But Okay, I have a Ferrite Core Clamp ZCAT3035 and I can try installing it with H-pol audio line between the IC-746pro and The Sound Blaster. And I have ASUS U5 but I think that IF U5 and U7 were on the same PC then could not be shared due to conflicting USB ports. But I also have a UMC202HD sound card. If U5 doesn't work due to conflicting USB ports, I'll try testing UMC202HD. Sorry I will tell you about test result tomorrow. Taka, JP3EXR From: Black Michael Sent: Monday, January 8, 2024 10:33 PM To: wsjt-devel@lists.sourceforge.net Cc: JP3EXR Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X 08th Jan For the most part all but one of your "no good" involve the Sound Blaster on an Input channel. So two suggestions. #1 Put a choke on the audio lines for all your sound lines into the Sound Blaster. Possible RFI into the computer might be locking up the card. #2 Replace the Sound Blaster with another ASUS. I assume the driver for the Sound Blaster is really old. Mike W9MDB On Monday, January 8, 2024 at 04:29:02 AM CST, JP3EXR via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net> > wrote: Hi wsjt development team. Thank you for supporting me. I send attached files of the test result, input and output audio port of two sound cards, and my system diagram. All combinations have test finished. Please check the test result of the Excel sheet. Sorry I don't know why but you are able to see Okay and No good results. I expected all the test results to be No good, but that was not the case. Sorry, but I don't understand why this is happening. Will this result help the development team? I installed just Windows 10 64bit OS and two sound card drivers and two JT65 of WSJT-X in advance so I was testing it with the simple PC. And then I checked all combinations. I am combination test with the two audio sound cards. Two inputs and two outputs, total 16 types. And each test number is a maximum 5 times for tx V and tx H. Problems might occur if you test more than that number of times. Unfortunately, the test results did not work with the port I use setting. I hope you can solve in my trouble it with software. The test environment of my PC is still in place. Please contact me if there is anything I can do to help. Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] I have in trouble JT65B of WSJT-X 07th of Jan
Hi wsjtx development team. Thank you for supporting me. I am still testing in trouble of run two JT65B with my PC right now. I clean installed on my PC from Windows DVD this morning. Then I got windows update on my PC. Then I made mistake that I installed driver to two USB sound cards before test. So my PC has two USB sound cards, for H port has Creative Sound Blaster HD and for V port has ASUS Xonar U7. Then so I had happened that the problem occurred soon where the decoding did not ended on my PC. I thought the problem of my PC was with the two USB sound card drivers. Then I clean installed on my PC again. I checked my audio port, already installed audio driver to H port sound card probably by windows update. But I tested JT65B of WSJT-X again. The test results were no problem until I installed the U7 driver. Now currently checking the combination of audio ports on my PC. It will take some time for the results to be communicated. By the way, Uwe I have a question. JT65 does not decode in the TXing period. But JT65 is decoding every time even when there is no signal. However, Q65 and FT8 do not decode when there is no signal. For example, is it possible for JT65 to not perform decoding processing when there is no signal, similar to Q65 and FT8? That seems to solve my in trouble. I may tell you my test result tomorrow. Thank you Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] I have in trouble JT65B of WSJT-X 06 Jan
Hi wsjtx development team. I am testing in trouble of run two JT65B with my PC right now. Uwe, I am sorry but I have been having in trouble from the beginning. Today's test report. I made the to do list the following. I am currently testing item "run two JT65B Test b" of the number 1. I need to check the result for 10 times of H and V so need a time for 20 minutes. If this continues, there will be no programs to add to the excluded file. Is there any better way? JP3EXR WSJT-PC Reinstall Method06th Jan, 2024 ※To do list Back up Folder in advance C: Drive \WSJT9-H and \WSJT9-V AppData\Local Folder \JTDX - FT8-H \JTDX - FT8-V \WSJT-X - JT65-H \WSJT-X - JT65-V \WSJT-X - Q65-H \WSJT-X - Q65-V \WSJT-X - WSJTFT8-H \WSJT-X - WSJTFT8-V Uninstall JTDX WSJT-X WSJT9 Delete JTDX-> \AppData\Local->\JTDX - FT8-H and \JTDX - FT8-V WSJT-X->\AppData\Local-> \WSJT-X - JT65-H, \WSJT-X - JT65-V, \WSJT-X - Q65-H \WSJT-X - Q65-V, \WSJT-X - WSJTFT8-H, \WSJT-X - WSJTFT8-V WSJT9-> C: Drive-> \WSJT9-H and \WSJT9-V 1. Install WSJT-X v2.6.1-> C:\WSJT Run two icon of JT65-H and JT65-V ※Manual simple setting for the test, PTT port com4, Audio port H and V are Current port use, sub mode. ※Run just one side of JT65B on V-pol Test a, it was good result. ※Run two JT65B Test b, It was no good result, then I tried adding the network drive \Z folder to the exclude folder of Windows Defender. So I tried the Windows Defender method that Mike was advice. Then Run two JT65B test with each TXing on H and V-pol it was No good result. But the frequency of occurrence had decreased than before. Then I tried adding C:\Splashtop to the exclude folder of Windows Defender. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I tried adding the JA2GRC ( JT linker program ) to the exclude folder on Windows Defender. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I add C:\Hamlog to the exclude folder of Windows Defender again. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I add C:\U7Audio driver of V-pol to the exclude folder of Windows Defender. Then Run two JT65B test with each TXing on H and V-pol right now. --- If Okay then JT65B H and V setting restore from USB Restore JT65B H and V data \WSJT-X - JT65-H and \WSJT-X - JT65-V from USB to \Local Folder ※Run two JT65B Test c After JT65B test if run two JT65B is Okay 2. Install JTDX V2.2.159->C:\JTDX Run two icon of FT8-H and FT8-V Restore FT8 data \JTDX - FT8-H and \JTDX - FT8-V from USB to \Local Folder ※Run two JT65B Test d After JT65B test if run two JT65B is Okay 3. Install WSJT9.7 r3636 -> C: Drive \WSJT9-H and \WSJT9-V Restore WSJT9, \WSJT9-H and \WSJT9-V from USB to c: \WSJT9-H and c: \WSJT9-V ※Run two JT65B Test e 4. Install Q65 ※Run two JT65B Test f 5. Install WSJT FT8 ※Run two JT65B Test g Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] I have in trouble JT65B of WSJT-X, 06 Jan
Hi wsjtx development team. I am testing in trouble of run two JT65B with my PC right now. Uwe, I am sorry but I have been having in trouble from the beginning. Today's test report. I made the to do list the following. I am currently testing item "run two JT65B Test b" of the number 1. I need to check the result for 10 times of H and V so need a time for 20 minutes. If this continues, there will be no programs to add to the excluded file. Is there any better way? JP3EXR WSJT-PC Reinstall Method06th Jan, 2024 ※To do list Back up Folder in advance C: Drive \WSJT9-H and \WSJT9-V AppData\Local Folder \JTDX - FT8-H \JTDX - FT8-V \WSJT-X - JT65-H \WSJT-X - JT65-V \WSJT-X - Q65-H \WSJT-X - Q65-V \WSJT-X - WSJTFT8-H \WSJT-X - WSJTFT8-V Uninstall JTDX WSJT-X WSJT9 Delete JTDX-> \AppData\Local->\JTDX - FT8-H and \JTDX - FT8-V WSJT-X->\AppData\Local-> \WSJT-X - JT65-H, \WSJT-X - JT65-V, \WSJT-X - Q65-H \WSJT-X - Q65-V, \WSJT-X - WSJTFT8-H, \WSJT-X - WSJTFT8-V WSJT9-> C: Drive-> \WSJT9-H and \WSJT9-V 1. Install WSJT-X v2.6.1-> C:\WSJT Run two icon of JT65-H and JT65-V ※Manual simple setting for the test, PTT port com4, Audio port H and V are Current port use, sub mode. ※Run just one side of JT65B on V-pol Test a, it was good result. ※Run two JT65B Test b, It was no good result, then I tried adding the network drive \Z folder to the exclude folder of Windows Defender. So I tried the Windows Defender method that Mike was advice. Then Run two JT65B test with each TXing on H and V-pol it was No good result. But the frequency of occurrence had decreased than before. Then I tried adding C:\Splashtop to the exclude folder of Windows Defender. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I tried adding the JA2GRC ( JT linker program ) to the exclude folder on Windows Defender. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I add C:\Hamlog to the exclude folder of Windows Defender again. Then Run two JT65B test with each TXing on H and V-pol it was No good result. Then I add C:\U7Audio driver of V-pol to the exclude folder of Windows Defender. Then Run two JT65B test with each TXing on H and V-pol right now. --- If Okay then JT65B H and V setting restore from USB Restore JT65B H and V data \WSJT-X - JT65-H and \WSJT-X - JT65-V from USB to \Local Folder ※Run two JT65B Test c After JT65B test if run two JT65B is Okay 2. Install JTDX V2.2.159->C:\JTDX Run two icon of FT8-H and FT8-V Restore FT8 data \JTDX - FT8-H and \JTDX - FT8-V from USB to \Local Folder ※Run two JT65B Test d After JT65B test if run two JT65B is Okay 3. Install WSJT9.7 r3636 -> C: Drive \WSJT9-H and \WSJT9-V Restore WSJT9, \WSJT9-H and \WSJT9-V from USB to c: \WSJT9-H and c: \WSJT9-V ※Run two JT65B Test e 4. Install Q65 ※Run two JT65B Test f 5. Install WSJT FT8 ※Run two JT65B Test g Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Mike Thank you for your advice about jt9.exe process. I will check it but it time is over midnight in Japan. Please let I check it tomorrow. And I will try to uninstall JTDX and WSJT-X and then I just install WSJT-X tomorrow. Then I will run two desktop icons of two JT65B. Then I restore two folders to two JT65B. And then I will test run two JT65B again. I will tell you my test result. Taka, JP3EXR -Original Message- From: Black Michael Sent: Saturday, January 6, 2024 12:35 AM To: wsjt-devel@lists.sourceforge.net Cc: JP3EXR Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X number 2 When it freezes check Task Manager and see if the jt9.exe process is using any CPU time. We need to know if the jt9.exe process is stuck or the user interface is just not disabling the decode button. There have a been other reports of the Decode button getting stuck. Mike W9MDB ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Patrik Thank you for the advice about my in trouble of you run two JT65B. I think I will uninstall JTDX and Q65 and FT8 of WSJT-X. So I think it's easy. So I just have one WSJT-X program and one JTDX program under C drive. And delete all of JTDX and WSJT folders under AppData Local. But I will back up all of the AppData Local folder in advance. Then I run two icons of two JT65B then the icon make two JT65B folder under AppData Local. Then I copy two JT65B folder from the backup to under AppData Local. And then I check run two JT65B test again. If it's Okay then I think I will try to testing install JTDX because I think the rig control or the audio control are not share with WSJT-X. Taka From: Patrick 9A5CW via wsjt-devel Sent: Friday, January 5, 2024 11:26 PM To: Black Michael ; WSJT software development Cc: Patrick 9A5CW Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X Mike, It is eme delay and # deep search or so decode. He need to make 2 new shortcuts and try with clean configuration too see if anything changes. I have noted similar problem on FT8 when decode button stays Cyan and no more decodes. Need to do few test with latest release to see if is still happening. 73, Patrik 9A5CW pet, 5. sij 2024. 15:09 Black Michael via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net> > je napisao: Your time looks off by quite a bit. Is your waterfall still working and just not decoding? Check here http://time.is And you can use Meinberg NTP to keep your time in sync. Just be careful when installing. Easy to miss the configuration setup right after it shows the installation files scrolling by. Here's a video showing how to install it... Mike W9MDB On Thursday, January 4, 2024 at 03:51:24 AM CST, JP3EXR via wsjt-devel mailto:wsjt-devel@lists.sourceforge.net> > wrote: Hi wsjtx development team. Thank you for helping me with my trouble. Sorry I forgot to send you about my trouble situation. Please check the two attached pictures. I am sorry for the Japanese display on the two attached screens. Both pictures run two JT65B of WSJT-X on my PC. Then you know two JT65B were decoding every periods. Please check the sample aa. I turned on the Enable TX on the left side of two JT65B. Then on the left side of two JT65B had TXing started at 0721. The on the right side JT65B was decoding every periods even on the left side of two JT65B had TXing started. You can see the decoding time of the single pass decode on the right side of JT65B. The decoding process of JT65B on the right side became freezing from 0721. Please check the sample ca. I turned on the Enable TX on the right side of two JT65B. Then on the right side of two JT65B had TXing started. Then The decoding process of JT65B on the left side is the same as the sample a. I am checking under what circumstances multiple JT65B are decoding freeze. I think two JT65B are decoding every periods if both JT65B does not TX. But JT65B of the TXing side does not decode in the TX period. I think the decoding freeze of JT65B at the same periods of not TX side of JT65B when TXing of JT65B finished of TXing period. And the decoding freeze may occur immediately at the earliest, or until about 10 TXing at the latest. Please contact me if you need additional confirmation. Best regard Thank you Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Uwe and the wsjt development team. Thank you for supporting us with our JT65B problem. I sent two emails about my situation. Probably my settings is different from other stations. I ask you the following question. I have 6 icons and I have 6 folders under AppData Local of two JT65B for H and V-pol, Q65A for H and V-pol and FT8 for H and V-pol of WSJT-X. And I have 2 icons and I have 2 folders under AppData Local of two FT8 for H and V-pol of JTDX. So I have their 8 folders under AppData Local, are those folders causing trouble? And I use the output all of the audio port are the same port as H and V-pol for each WSJT and JTDX. This is because I just use one side of TX which both IC-746pro. Of course, I use it the same as WSJT-X and JTDX. Is it okay to use the output audio port of the only one port to all of the instances as share on one PC? Taka, JP3EXR From: Uwe, DG2YCB via wsjt-devel Sent: Friday, January 5, 2024 7:44 PM To: WSJT software development Cc: Uwe, DG2YCB Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X Hi Taka, Larry, and all I would really like to help you, but the error simply does not occur on my PC. I have run numerous tests with two instances this morning. Both with WSJT-X v2.6.1 and v2.7.0-rc3 and with wsjt-x_improved v2.7.1-devel. I tested various settings (EME delay on/off, with FT-991 CAT control vs without (i.e. CAT = None), real transmission via antenna vs virtual audio, and so on). Result: There was not a single case where this error occurred. It always worked perfectly with JT65B, and with the other modes. The decode button did not get stuck, and I was also able to decode my own transmissions from the first instance with the second one without any problems when using my virtual audio cable. (Due to time constraints, I only tested the latter for my 2.7.1-devel version). Very important: The error that the second instance hangs after you have transmitted with the first one (visible by the fact that the Decode button remains cyan) always occurs if not both instances were started with the " --rig-name=InstanceNameXYZ" parameter but only the second one. In this case, the "zeroth" instance (that without the " --rig-name..." parameter) shoots down all the others. So please make sure once again that this is not the case. Perhaps caused by a spelling mistake (" -rig-name..." instead of " --rig-name..." or something like that). 73 de DG2YCB, Uwe German Amateur Radio Station DG2YCB Dr. Uwe Risse eMail: dg2...@gmx.de <mailto:dg2...@gmx.de> Info: www.qrz.com/db/DG2YCB <http://www.qrz.com/db/DG2YCB> Am 05.01.2024 um 04:19 schrieb Larry Davis via wsjt-devel: i can run any of the other modes msk q65 but to try to run 2 jt65b on the same computer one tx and one rxing the second one hang up on decode you can run one all day long no problem i just stoped running two version of jt65b On Thursday, January 4, 2024 at 08:27:45 PM CST, Larry Davis via wsjt-devel <mailto:wsjt-devel@lists.sourceforge.net> wrote: i don,t think it is a problem with the computer i ran into same problem with 13900k 64 gb of ram with 2 wsjtx open on jt65b second computer 14900k 64gb of ram same problem i just think it a bug when you run 2 wsjtx the second one hang up on decodes _ From: JP3EXR via wsjt-devel <mailto:wsjt-devel@lists.sourceforge.net> Sent: Thursday, January 4, 2024 5:28 PM To: 'Black Michael' <mailto:mdblac...@yahoo.com> ; wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> <mailto:wsjt-devel@lists.sourceforge.net> Cc: JP3EXR <mailto:exr0...@gmail.com> Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X Hi Mike W9MDB Good morning from Japan. Thank you for your cooperation. Thank you for asked me about my current PC spec. You are able to see the attached picture of my current PC specification. My current PC has 16GB memory and CPU has i7-4790K. I used an older PC has 8GB memory and i5 CPU for WSJT-X. I thought that my JT65B in problem was caused by the slow speed of my old PC. So I was thinking the same thing as Mike until November last year. I thought I was able to solve my JT65B problem by replacing it with the current faster PC. Then I replaced my older PC to my current PC in November last year. But unfortunately, my in problem with run two JT65B cannot be resolved at this time. I will test the advice you gave me yesterday on my WSJT PC today. Then I will also email you of the test results. Thank you Taka, JP3EXR -Original Message- From: Black Michael <mailto:mdblac...@yahoo.com> Sent: Friday, January 5, 2024 2:40 AM To: wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> Cc: JP3EXR <mailto:exr0...@gmail.com> Subject: Re: [wsjt-devel] I have in trouble
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Mike W9MDB Good morning from Japan. Thank you for your cooperation. Thank you for asked me about my current PC spec. You are able to see the attached picture of my current PC specification. My current PC has 16GB memory and CPU has i7-4790K. I used an older PC has 8GB memory and i5 CPU for WSJT-X. I thought that my JT65B in problem was caused by the slow speed of my old PC. So I was thinking the same thing as Mike until November last year. I thought I was able to solve my JT65B problem by replacing it with the current faster PC. Then I replaced my older PC to my current PC in November last year. But unfortunately, my in problem with run two JT65B cannot be resolved at this time. I will test the advice you gave me yesterday on my WSJT PC today. Then I will also email you of the test results. Thank you Taka, JP3EXR -Original Message- From: Black Michael Sent: Friday, January 5, 2024 2:40 AM To: wsjt-devel@lists.sourceforge.net Cc: JP3EXR Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X How much memory do you have in your computer? Mike W9MDB On Thursday, January 4, 2024 at 03:51:24 AM CST, JP3EXR via wsjt-devel wrote: Hi wsjtx development team. Thank you for helping me with my trouble. Sorry I forgot to send you about my trouble situation. Please check the two attached pictures. I am sorry for the Japanese display on the two attached screens. Both pictures run two JT65B of WSJT-X on my PC. Then you know two JT65B were decoding every periods. Please check the sample aa. I turned on the Enable TX on the left side of two JT65B. Then on the left side of two JT65B had TXing started at 0721. The on the right side JT65B was decoding every periods even on the left side of two JT65B had TXing started. You can see the decoding time of the single pass decode on the right side of JT65B. The decoding process of JT65B on the right side became freezing from 0721. Please check the sample ca. I turned on the Enable TX on the right side of two JT65B. Then on the right side of two JT65B had TXing started. Then The decoding process of JT65B on the left side is the same as the sample a. I am checking under what circumstances multiple JT65B are decoding freeze. I think two JT65B are decoding every periods if both JT65B does not TX. But JT65B of the TXing side does not decode in the TX period. I think the decoding freeze of JT65B at the same periods of not TX side of JT65B when TXing of JT65B finished of TXing period. And the decoding freeze may occur immediately at the earliest, or until about 10 TXing at the latest. Please contact me if you need additional confirmation. Best regard Thank you Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] I have in trouble JT65B of WSJT-X
Hi Mike Thank you for supporting me. You are right, I am using Virusbuster by Trend Micro of the antivirus program for on my PC. On this PC does not use anything use other than WSJT. So I will be able to uninstall Virusbuster on my PC. I will uninstall Virusbuster on my PC tomorrow. Then I will try testing of run two JT65B without Virusbuster. I will tell you my test result after testing of run two JT65B. Thank you Mike Taka, JP3EXR -Original Message- From: Black Michael via wsjt-devel Sent: Thursday, January 4, 2024 10:27 PM To: JP3EXR via wsjt-devel Cc: Black Michael Subject: Re: [wsjt-devel] I have in trouble JT65B of WSJT-X Exclude all of your ham software folders and data locations. The antivirus programs are interfering with all sorts of ham stuff including logging QSOs. I helped one of the DXpeditions a couple years ago when they were losing QSOs in the log due to antivirus scanning of the log file for example. For Windows Defender: https://support.microsoft.com/en-us/help/4028485/windows-10-add-an-exclusion-to-windows-security For example I exclude all of these c:\Program Files (x86)\HamApps c:\ProgramData\HamApps c:\WSJT %LOCALAPPDATA%\WSJT-X (and any other WSJT-X directories for alternate configurations) %LOCALAPPDATA%\HamApps %HOMEPATH%\flrig.files %HOMEPATH%\fldigi.files Also exclude your logging program and it's data files too and database location. I use Log4OMV2 for example For Log4OM2 I also have %HOMEPATH%\AppData\Roaming\LogOMV2 Mike W9MDB On Thursday, January 4, 2024 at 05:34:52 AM CST, Larry Davis via wsjt-devel wrote: i see the same problem over the last few years on jt65b when running 2 or 3 slices on my flex On Thursday, January 4, 2024 at 03:50:18 AM CST, JP3EXR via wsjt-devel wrote: Hi wsjtx development team. Thank you for helping me with my trouble. Sorry I forgot to send you about my trouble situation. Please check the two attached pictures. I am sorry for the Japanese display on the two attached screens. Both pictures run two JT65B of WSJT-X on my PC. Then you know two JT65B were decoding every periods. Please check the sample aa. I turned on the Enable TX on the left side of two JT65B. Then on the left side of two JT65B had TXing started at 0721. The on the right side JT65B was decoding every periods even on the left side of two JT65B had TXing started. You can see the decoding time of the single pass decode on the right side of JT65B. The decoding process of JT65B on the right side became freezing from 0721. Please check the sample ca. I turned on the Enable TX on the right side of two JT65B. Then on the right side of two JT65B had TXing started. Then The decoding process of JT65B on the left side is the same as the sample a. I am checking under what circumstances multiple JT65B are decoding freeze. I think two JT65B are decoding every periods if both JT65B does not TX. But JT65B of the TXing side does not decode in the TX period. I think the decoding freeze of JT65B at the same periods of not TX side of JT65B when TXing of JT65B finished of TXing period. And the decoding freeze may occur immediately at the earliest, or until about 10 TXing at the latest. Please contact me if you need additional confirmation. Best regard Thank you Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] I have in trouble JT65B of WSJT-X
Hello WSJT software development team. Sorry I asked you about in my problem of I run two JT65B of WSJT-X on the 29th of December. But I am unable to received your advice yet. Is it able to okay accept my problem? I am able to provide various information for you. What should I do? Best regard Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Happened problem with run two JT65B.
I am Taka, JP3EXR and am Japanese 2m EMEer. Mike, W9MDB came to my PC and helped me with remote when happened problem of I run two FT8 of JTDX on this PC. Mike do you remember me? I'm still using my two old transceivers ( IC-746pro, called IC-7400 in Japan ) in EME. For the EME until now, in JT65B case I run two JT65B of WSJT9.7 r3639 on one PC. But Joe, K1JT recommends WSJT-X is working well, so I installed WSJT-X Ver 2.6.1 for two JT65B, two Q65A and two FT8 on one PC. I made each program with the rig-name of the desktop Icon. So I was still having two Q65A and two FT8 of WSJT-X. Then I tried to run two JT65B of WSJT-X on one PC but it's having trouble now. I don't think this kind of problem will occur if you use it normally as run just one JT65B of WSJT-X on one PC. In my case, on the receiving, I am using two IC-746pro transceivers to receive each EME signals on H and V-pol to two input each audio ports on one PC. On the transmitting, I am using the same output audio port for two JT65B of WSJT-X for the transmitting and I am transmitting with just V-pol side of IC-746pro. Therefore, I run two JT65B of WSJT-X on one PC. My trouble is that when one side JT65B repeats transmitting and receiving, the another not transmitting side JT65B remains in the decoding state. This trouble occurs in the period of 50 seconds to 60 seconds after JT65B on the transmitting side finishes transmitting and started receiving. Of course, JT65B on the decoded state side will no longer after be able to decode. It was recovered by restarting when JT65B on the side where the failure occurred. Of course even H-pol side transceiver is transmitting the same time with the PTT port of the RIG when I am transmitting. So the H-pol side PC does not received from the input audio signal with the receive side transceiver when IC-746pro is transmitting. Therefore, I think this trouble is unable to be prevented even if the input is stopped by hardware. Just in case, I tried to make an audio cutoff circuit and tested it. However, the problem could not be avoided with that circuit. By the way, run two Q65 or run two FT8 of the same WSJT-X version does not have the same this problem. Although it is not realistic, I tested it with mixed JT65B and Q65A. It's works fine. So I think this problem probably occurs when two JT65Bs are used at the same time. I posted even after I checked if the cause of the trouble was on the PC. So my PC was Win10 OS and i5 CPU so it was not fast. Then I replaced the CPU to fast i7 CPU of the PC but it OS is Win 10. The CPU usage rate when running two JT65Bs is about 10%. Thank you for reading my not so well English. Best regard. Taka, JP3EXR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel