Re: [wsjt-devel] WSJT-X 2.6.0-rc5 hamlib failure for Flex radio

[Robert Wright via wsjt-devel]

The manual copy of http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll over 
the rc-5 install fixed the FlexRadio problem here.

Thanks and 73,
Bob, N7ZO

-Original Message-
From: Black Michael via wsjt-devel  
Sent: Tuesday, November 29, 2022 10:37 AM
To: wsjt-devel@lists.sourceforge.net
Cc: Black Michael 
Subject: Re: [wsjt-devel] WSJT-X 2.6.0-rc5 hamlib failure for Flex radio

RC5 was built with an older hamlib.

Please try the latest.

New hamlib for installation directions

#1 Shut down WSJTX


#2 Download either the 32-bit or 64-bit DLL matching the 32/64-bit version of 
WSJTX -- hopefully your browser doesn't block it but may warn you multiple 
times.


If you can do a "Save As" you can save it directly in the appropriate WSJTX 
directory C:\WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there.


http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll


http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll


Linux/Unix/Mac users need to compile the latest tar file from 
http://n0nb.users.sourceforge.net
Note: If compiling on Unix-like systems please uninstall any Hamlib package you 
have before installing the new build


#3 If you don't save directly you need to open a file browser and move the file 
that way.


If you're not familiar with that here's a video on the file browser - 
https://www.youtube.com/watch?v=AyVqCJrs9dk


Mike W9MDB








On Tuesday, November 29, 2022 at 12:08:03 PM CST, Jay via wsjt-devel 
 wrote: 





I just installed the new RC5 into my Windows 10 64 bit computer and am getting 
a Hamlib error when trying to activate CAT control.

Radio is a Flex 6500 and I normally use TCP ports to control the Slice 
receiver, This is NOT the Kenwood emulation using COM ports. However I get this 
error message when I try to test the CAT connection in the Settings/Radio tab 
in WSJT-X RC5. See attached jpg.

73 Jay KA9CFD


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Muted receive audio causes WSJT-X JT65B decoder to hang

[Robert Wright]

Hi All,
I sent this to the list about three weeks ago and got no responses, so either 
it got buried in the mail list traffic or the topic is not high enough 
priority.  Anyways, I will try one more time before I let it drop.
For my X-pol EME station, I run two instances of WSJT-X (currently v2.4.0-rc4) 
along with MAP65. The WSJT-X's are set to decode JT65B.  When I transmit a 
sequence with MAP65 or one of the WSJT-X's, one instance of the WSJT-X's will 
still be receiving and the audio will be muted for the duration of the 
transmit.  (The radio is a FlexRadio 6700.)
The result is that the instance of WSJT-X that was receiving the muted audio 
will show "decoding" forever and must be re-started.
I have captured into a WAV file the audio sequence that causes this problem.  
This file contains a bit of audio at the beginning, then silence, then a bit of 
audio at the end.  This WAV file, when opened with WSJT-X v2.4.0-rc4 (and 
probably earlier versions), will reliably hang the JT65B decoder.  How can I 
send this file and report to the development team?
Thank you and 73,
Bob, N7ZO, Oregon
n...@outlook.com


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

[wsjt-devel] Muted receive audio causes JT65B to “decode forever”

[Robert Wright]

Hello All,
For my X-pol EME station, I run two instances of WSJT-X (currently v2.4.0-rc4) 
along with MAP65. The WSJT-X’s are set to decode JT65B.  When I transmit a 
sequence with MAP65 or one of the WSJT-X’s, one instance of the WSJT-X’s will 
still be receiving and the audio will be muted for the duration of the 
transmit.  (The radio is a FlexRadio 6700.)
The result is that instance of WSJT-X will show “decoding” forever and must be 
re-started.
I have captured the WAV file that causes this problem.  This file contains a 
bit of audio at the beginning, then silence, then audio at the end.  This WAV 
file, when opened with WSJT-X v2.4.0-rc4 (and probably earlier versions), will 
reliably hang the JT65B decoder.  How can I send this file and report to the 
development team?
Thank you and 73,
Bob, N7ZO, Oregon
n...@outlook.com


___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel