Re: [wsjt-devel] FD FT4 crashing - FAST decode no crashes
Sorry I forgot to say I was using FT8 when the problem was observed .,,not in contest mode Sent from my iPhone > On Jun 29, 2020, at 12:18 AM, SCHMAHL wrote: > > I have installed version 2.2.2 and the latest version update of Win10. I > notice that with many cycles I get no decodes even though there are many good > signals. Sometimes there are up to 3 decodes per cycle and then none. On > occasion the decoding stops completely and I have to hit the decode key to > start it again or reboot the program. Many times I have to send a reply 3 or > 4 times after someone replies to my CQ before the QSO continues. Perhaps > these problems are related. I have never had this decoding problem before. It > happens also with very few signals observed on the band not just when it is > crowded. > Ron Schmahl K2PSD > > >> On June 28, 2020 at 6:12 PM Bill Somerville wrote: >> >> >>> On 28/06/2020 19:12, David Kjellquist wrote: >>> Myself and a friend both tried operating today using fast decode (not >>> normal or deep). We both had crashes with other decode settings. >>> >>> Both experienced no crashes or other problems. We both use WSJT-X >>> 2.2.2, Windows 10 (up to date), JTalert 2.16.8, N3FJP 6.03 and Flex 6600. >>> >>> Hope this helps. >>> >>> -- >>> Dave, WB5NHL >> >> Hi Dave, >> >> thanks for that report. Apologies to you and others that we could not >> identify the problem earlier. It looked like the bands were plenty busy >> enough for working in fast decode mode without AP decodes and missing a >> few decodes every period was not too much of a hardship. >> >> 73 >> Bill >> G4WJS. >> >> >> >> ___ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] FD FT4 crashing - FAST decode no crashes
I have installed version 2.2.2 and the latest version update of Win10. I notice that with many cycles I get no decodes even though there are many good signals. Sometimes there are up to 3 decodes per cycle and then none. On occasion the decoding stops completely and I have to hit the decode key to start it again or reboot the program. Many times I have to send a reply 3 or 4 times after someone replies to my CQ before the QSO continues. Perhaps these problems are related. I have never had this decoding problem before. It happens also with very few signals observed on the band not just when it is crowded. Ron Schmahl K2PSD > On June 28, 2020 at 6:12 PM Bill Somerville wrote: > > > On 28/06/2020 19:12, David Kjellquist wrote: > > Myself and a friend both tried operating today using fast decode (not > > normal or deep). We both had crashes with other decode settings. > > > > Both experienced no crashes or other problems. We both use WSJT-X > > 2.2.2, Windows 10 (up to date), JTalert 2.16.8, N3FJP 6.03 and Flex 6600. > > > > Hope this helps. > > > > -- > > Dave, WB5NHL > > Hi Dave, > > thanks for that report. Apologies to you and others that we could not > identify the problem earlier. It looked like the bands were plenty busy > enough for working in fast decode mode without AP decodes and missing a > few decodes every period was not too much of a hardship. > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] FD FT4 crashing - FAST decode no crashes
On 28/06/2020 19:12, David Kjellquist wrote: Myself and a friend both tried operating today using fast decode (not normal or deep). We both had crashes with other decode settings. Both experienced no crashes or other problems. We both use WSJT-X 2.2.2, Windows 10 (up to date), JTalert 2.16.8, N3FJP 6.03 and Flex 6600. Hope this helps. -- Dave, WB5NHL Hi Dave, thanks for that report. Apologies to you and others that we could not identify the problem earlier. It looked like the bands were plenty busy enough for working in fast decode mode without AP decodes and missing a few decodes every period was not too much of a hardship. 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] FD FT4 crashing - FAST decode no crashes
Myself and a friend both tried operating today using fast decode (not normal or deep). We both had crashes with other decode settings. Both experienced no crashes or other problems. We both use WSJT-X 2.2.2, Windows 10 (up to date), JTalert 2.16.8, N3FJP 6.03 and Flex 6600. Hope this helps. -- Dave, WB5NHL 5BDXCC, 312 countries confirmed @dkjellqu ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
