On 23/07/2019 21:09, Rich Zwirko - K1HTV wrote:
During this past weekend's CQWW VHF contest I operating on 6 Meters,
primarily using the FT8 and FT4 modes. Of the 312 QSOs made, 212 of
them were on FT8 and 79 on FT4. The other 21 QSOs were on the analog
modes.
I ran WSJT-X with N1MM and all worked fine. The best FT4 DX to the
east during the contest was EA8DBM in IL18 and the farther to the west
was W7MEM in DN17 in Idaho. On Saturday evening around 22:40Z here in
VA (FM18ap) I decoded a number of FT8 stations from Japan. According
to PSK Reporter I was decoded by 4 JA stations. I worked one of them,
JG1TSG in QM05.
After the contest was oven, I wanted to check to see if any other JA
stations were decoded during that SSSP opening. But, to my
disappointment, the ALL.TXT file did not archive any decodes during
the contest while WSJT-X was running with N1MM. I checked the computer
but could not find a similar 'ALL.TXT' file that N1MM may have saved.
Would there be a way, when WSJT-X is in used with N1MM, that WSJT-X
could continue archiving all decodes? I would have loved to analyze
the decodes made on both FT8 and FT4 modes during the contest.
73,
Rich - K1HTV
Hi Rich,
N1MM Logger+ starts WSJT-X with a --rig-name option, that means that the
settings and log files will be in a separate directory, something like:
"%LocalAppData%\WSJT-X - ForEW1\"
I'm not sure what ForEW1 means but that seems to be the default
--rig-name argument N1MM Logger+ uses when starting WSJT-X. You may have
overridden the --rig-name option in the "N1MM Logger+->Config
...->WSJT-X" tab, in which case the log files directory name will be
different.
73
Bill
G4WJS.
___
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel