[X2Go-User] Session with a single application
Hello! How to configure a session with a single application? "Session Type": "Application" -> command "thunar" and/or "/usr/bin/thunar" in the right box => Application starts but freezes immediately (or at least doesn't respond to input/mouse). No matter whether browser, mail, Libreoffice, pcmanfm,... Greeting, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] x2go parallel to LTSP
Hi! Is it possible to use x2go-server on a server parallel to LTSP? If so, would it be possible a) to decide when booting the client whether to load an LTSP image or the x2go-TCE? b) take over an LTSP session remotely via x2go? Greeting, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] x2go and jerky websites
On Mon, 12 Jun 2023 20:39:00 +0200 Stefan Baur wrote: > Which Linux distribution and version are you looking to install? My plan was primarily Bodhi because it runs nice and fast, but at the moment I'm also testing with Lubuntu, Ubuntu, etc. Anything with Ubuntu origins as LTS (22.04, bodhi 6 ~only 20.04) is okay, with LXQt, LXDE, IceWM, anything fast. A light, fast distribution that can still be managed graphically would be ideal, which unfortunately sometimes contradicts itself. Puppy etc. are great, but with such I have repeatedly reached my limits when setting up the complete system as a server / x2go server with DHCP, cifs, etc. Greeting, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] x2go and jerky websites
Hi Stefan! At the top of their website there is now a notice of a server failure. And since somewhere on the website it is explicitly mentioned that users shouldn't send questions about technical things by e-mail, I refrained from doing so. I tested again several hours on my ESXI and on a local PC + Clients with several new VMs with Ubuntu, Lubuntu, Bodhi, ... and different browsers, but everyone except Pale-Moon stutters. What is the easiest way for me to test x2goKdrive? There was an email regarding the release, but unfortunately I can't find it in the source. Greeting, Olaf On Mon, 12 Jun 2023 20:04:51 +0200 Stefan Baur wrote: > Am 11.06.23 um 14:53 schrieb Olaf: > > Unfortunately, it has now turned out that Pale-Moon is not > > compatible with one of the websites that I absolutely need. The > > drop down menus included there freezes the browser for a long time > > as far as I can tell. Since the Pale-Moon forum hasn't been > > available for a long time and I don't see any other support, I > > can't get any further. > > Sad. I completely missed the forum having issues. However, you could > try shooting Moonchild an E-Mail - not with your tech support > question, but asking where to ask for tech support in the meantime > while the forum is down. > > > Does x2goKdrive work with the TCE? > > Then Kdrive would be my last chance with x2go and I would try it > > out. > > I've created X2Go-TCE-Live builds with KDriveclient included in the > past, and we used them at several events to demo X2Go-TCE. > > I can't speak for X2Go-TCE-NFS, but would expect that it should work, > too. > > Kind Regards, > Stefan Baur > ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] x2go and jerky websites
Hi Stefan & Uli! Unfortunately, it has now turned out that Pale-Moon is not compatible with one of the websites that I absolutely need. The drop down menus included there freezes the browser for a long time as far as I can tell. Since the Pale-Moon forum hasn't been available for a long time and I don't see any other support, I can't get any further. Uli, Thank you for the information about the differences. Due to the stuttering in browsers, I have made several attempts with the settings in the past, but had no significant success. Does x2goKdrive work with the TCE? Then Kdrive would be my last chance with x2go and I would try it out. Greetings, Olaf On Thu, 11 May 2023 22:11:19 +0200 Olaf Staubus wrote: > Hello Stefan, > > Thank you for the great tip. Pale Moon really runs a lot smoother. > > Would that work much better with KDrive than this combination with > PaleMoon? > > If I can optimize this a bit, then I could save myself the switch to > LTSP that was actually planned for this reason. > > Greeting, > Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] temporarily disable pxe / Kernel panic
Hello! In my existing system, x2go including the pxe server runs on a virtual machine. Since I've had a few problems with it for a long time, such as windows closing immediately when calling up an already running session from one PC to the other, I would like to test a new installation in another virtual machine. However, the old and the new system presumably get in the way(?) If the new server is also running and I boot a thin client, after a long boot time comes: 192.799091] Kernel panic - not syncing: Attempted to kill init! [192.801339] Pid: 1, comm: busybox Not tainted 3.2.0-4-486 #1 Debian 3.2.68-1+deb7u3 [192.803339] Call Trace: [192.805281] [] ? panic+0x4d/0x139 [192.807360] [] ? do_exit+0x75/0x598 [192.809562] ... do_group_exit ... ... sys_exit_group ... ... syscall_call ... ... panic occured, switching back to text console How can I temporarily disable the PXE functionality of the previous server? And/or is there another problem here? Greeting, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] x2go and jerky websites
Hello Stefan, Thank you for the great tip. Pale Moon really runs a lot smoother. Would that work much better with KDrive than this combination with PaleMoon? If I can optimize this a bit, then I could save myself the switch to LTSP that was actually planned for this reason. Greeting, Olaf On Wed, 10 May 2023 16:15:52 +0200 Stefan Baur wrote: > Hi Olaf! > > Am 10.05.23 um 15:12 schrieb Olaf Staubus: > > I've been using x2go for a long time and I've always had the > > problem of jerky scrolling on websites. > > > > In the meantime, however, I use cloud services in the browser, and > > now another one is added. This is practically no longer usable with > > my x2go installation. > > > > Is there a combination (Linux OS + browser) that runs really fast? > > Videos aren't important, but modern websites shouldn't be > > stuttering. > > For classic, NX-libs based X2Go, you should use Pale Moon instead of > Firefox or Chrome. > If you're willing to run X2Go nightly builds, you can switch over to > X2Go-KDrive, this should give you better browser performance for > Firefox and Chrome. (KDrive should become stable Real Soon Now TM, > but at the moment, it's only available via our nightly builds.) > > Kind Regards, > Stefan Baur > ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] x2go and jerky websites
Hello! I've been using x2go for a long time and I've always had the problem of jerky scrolling on websites. In the meantime, however, I use cloud services in the browser, and now another one is added. This is practically no longer usable with my x2go installation. Is there a combination (Linux OS + browser) that runs really fast? Videos aren't important, but modern websites shouldn't be stuttering. Greeting, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Failed messages during startup & small session menu
Hi! The start process from the boot menu to the session menu takes an extremely long time, several minutes. The three graphic points in the middle on a black background suddenly become confusing characters, then comes: Starting User Login Management... [ OK ] Finished Hold until boot process finished up. [ OK ] Finished Terminate Plymouth Boot Screen. [FAILED] Failed to start User Login Management. See 'systemctl status systemd-logind.service' for details. [FAILED] Failed to start User Login Management. [FAILED] Failed to start Load Kernel Module drm. [FAILED] Failed to start User Login Management. [FAILED] Failed to start Load Kernel Module drm. [FAILED] Failed to start User Login Management. After that Debian GNU/Linux 11 x2gothinclient tty1 x2gothinclient login: After that ultimately, the session menu appears graphically correct in the upper left corner, but much too small, as if the screen size was not recognized. Or is there somewhere a setting option for the size? If you select a session, the session will be opened correctly in full screen. The termination (shutdown) of the session also takes a lot of time, until the small session menu. What can be the reason? Greetings, Olaf (Tested in the preview window of vmware esxi client and locally with a real client.) ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
Re: [X2Go-User] pxe-boot: unable to locate configuration file
Am Sat, 18 Dec 2021 23:12:20 +0100 schrieb Juri Grabowski : > did you have /srv/tftp/pxelinux.cfg/default ? Thank you very much, that was it, I had overlooked or apparently no longer remembered that this has to be created manually first. Greetings, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] pxe-boot: unable to locate configuration file
Hello! I have set up a new server with an Ubuntu offshoot (bodhi). The client reports correct IP / Mask / DHCP IP / Gateway IP from dhcpd.conf when booting via pxe, but then: "PXELINUX 6.04 PXE 20191223 ... Anvin ... Unable to locate configuration file" /etc/dhcpd.conf: next-server 192.168.3.8; filename "/pxelinux.0"; interface ens160; Connecting from another PC with x2go client works. I've been sitting there for hours and can't get any further. Would be great if someone could help me. /etc/default/isc-dhcp-server: INTERFACESv4 = "ens160" /etc/exports: /opt/x2gothinclient/chroot 192.168.3.0/255.255.255.0(ro,async,no_root_squash,no_subtree_check) /srv/tftp/pxelinux.0 => /usr/lib/PXELINUX/pxelinux.0 Greetings, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Stop pxe-Server
Hello! How can I stop the pxe-server (only the pxe function)? I have installed a new Linux server with x2go and would like to test this parallel to the old Linux x2go server, but the new one does not accept the old pxe server. Since at that time I installed the x2go server and the pxe server together on one, I only want to be able to stop / start the pxe-function of the old one to test the new one. Would be great if someone can help. Greetings, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Stop pxe-server
Hi, how can I stop the pxe-server? (Only the pxe-function) I’m installing a new one and want to test it. Bye, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org https://lists.x2go.org/listinfo/x2go-user
[X2Go-User] usb fingerprint
Hi! Is there any solution to use usb fingerprint sensor to log-in/load sessions with x2go tce? Bye, Olaf Gesendet mit TypeApp ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Enable sound on x2go tce
Hi! My thinclient loads x2go tce (Ubuntu 14.04) over pxe. What do I have to do to make sound work? Extract from my /opt/x2gothinclient/etc/x2gothinclient_sessions: ... sound=true soundsystem=pulse startsoundsystem=true soundtunnel=true defsndport=true sndport=4713 ... Bye, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Black screen after pxe boot
Hello! While TCE boots via pxe (showing the progress bar) it uses only 25% of the screen (1920x1080) in the upper left corner. After booting the screen is black and displays a small "x" for the pointer. Other PCs / clients work, so I suspect that there is a problem with the video driver. Does somebody has any idea? Ubuntu 14.04 Client: Fujitsu FUTRO S550, ATI Radeon X1250 Greetings + Thanks, Olaf ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] Kernel panic - not syncing: Attempted to kill init
Hi! My x2go-TCE actually works. But if I then want to continue to work the next day to the system, the client loads for several minutes until it breaks then with the message ... "Kernel panic - not syncing: Attempted to kill init! ... "Pid: 1, comm: init Not tainted 3.2.0-486 # 1 Debian 3..68-1 + deb" ... "Call Trace" ... "? Panic + 0x4D / 0x139" ... "Do_exit? + 0x75 / 0x598" ... "Do_group_exit? + 0x48 / 0x6B" ... "Sys_exit_group? + 0x11 / 0x11" ... "? Syscall_call + 0x7 / 0x7" A VM that I use as a thin client for testing, writes the same lines, and behind it yet: ... "atkbd serio0: Spurious ACK on isa0060 / serio0 Some Program Might Be Trying access hardware directly." The whole happens if I the next day again test the system, so turn on a client and the system is loaded. The day before, it was always perfect. I've written in the /srv/tftp/x2go-tce.cfg: APPEND SELINUX = permissive SELINUXTYPE = permissive After that it was not working for one start, but after that the error comes again. If rebooting the server, the problem is resolved, but the next day it's back. It would be nice if someone would help me. Olaf (PS: Stefan, thank you for your help in the article "Writing through dangling symlink ...", that was the solution. I just do not get how I can respond to the contribution from you on gmane..) ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] cp: not writing through dangling symlink /opt/x2gothinclient/chroot/etc/x2go/x2gothinclient_init
Hi Stefan! The adding extra spaces before and after "/" are from google translator. I have not seen that after copying / before paste the text, sorry. Thank you for "TC_X2GO_DEBURL = deb http://packages.x2go.org/debian wheezy main" It works now. Bye, Olaf (PS: I am not sure if this posting will be there at the correct place, in the thread. I did not receive any mail after the Authorization-Mail, and I do not see any "reply"-Button on this gmane-page.) ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
[X2Go-User] cp: not writing through dangling symlink /opt/x2gothinclient/chroot/etc/x2go/x2gothinclient_init
Hello! I can not get to install the TCE on Ubuntu 14.04, as described on http://wiki.x2go.org/doku.php/wiki:advanced:tce:install?s[]=pxe. There is a problem with a symbolic link, I think. It would be great if someone can help me. Bye, Olaf $ sudo aptitude install x2gothinclientmanagement $ sudo joe / etc / x2go / x2gothinclient_settings → There I did not change anything, because I do not know what to do. $ sudo x2gothinclient_create (The last messages) ...Installing X2Go TCE configuration into chroot environment ... -- -- '/ opt / x2gothinclient / etc / x2gothinclient_init' -> '/ opt / x2gothinclient / chroot / etc / x2go / x2gothinclient_init' cp: not writing through dangling symlink / opt / x2gothinclient / chroot / etc / x2go / x2gothinclient_init ' olaf@server: $ sudo x2gothinclient_update X2go Thin Client Environment: = The X2Go Thin Client Environment is using the Following Settings: TC_PRETTY_NAME = X2Go TCE TC_VERSION = 1.1.0.2 TC_BASE = / opt / x2gothinclient TC_CONFIG = / opt / x2gothinclient / etc TC_CHROOT = / opt / x2gothinclient / chroot TC_SHELL = bash TC_DISTRO_CODENAME = wheezy TC_DEBMIRROR_URL = http: //ftp.debian.org/debian TC_X2GO_DEBURL = deb http://packages.x2go.org/debian wheezy main heuler TC_HTTP_PROXY = TC_HTTPS_PROXY = TC_FTP_PROXY = TC_MODULE_BLACKLIST = pcspkr TC_TFTP_BOOT = / srv / tftp Edit / etc / x2go / x2gothinclient_settings to change this. Installing X2Go TCE configuration into chroot environment ... -- -- "/ Opt / x2gothinclient / etc / x2gothinclient_init? -> "/ Opt / x2gothinclient / chroot / etc / x2go / x2gothinclient_init? cp: write by the incomplete symbolic link "/ opt / x2gothinclient / chroot / etc / x2go / x2gothinclient_init? can not olaf@server: ___ x2go-user mailing list x2go-user@lists.x2go.org http://lists.x2go.org/listinfo/x2go-user
