Re: [Xastir] Level III radar mosaics are back
On Tue, 1 Jun 2010, Gerald Creager wrote: Still working to make the WMS work, should be this week. Lost a lot with recovering from some config and hardware FUBARs. For a short time after this message, I could pull data from USRADAR.geo, but it seems to have gone away again. WMSRADAR.geo gives me a totally black screen. Also, when I have RidgeDTX (+/or RidgeGRR or RidgeIND) active, and there is no storm activity in the area, I see a large cloud of 'ground clutter' around the station location. When there is some storm activity, this seems to be well suppressed. Is this an artifact of some AGC action in the radar itself? You seem to do a wonderful job of filtering out these spurious responses when you assemble the mosaics to generate USradar and WMSradar. I'm looking forward to their return! -- Rick Green, N8BJX Those who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety. -Benjamin Franklin As for our common defense, we reject as false the choice between our safety and our ideals. -President Barack Obama 20 Jan 2009 ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] 1.9.8 1.9.9
On Tue, Jul 13, 2010 at 08:59:36AM -0700, we recorded a bogon-computron collision of the ml41...@yahoo.com flavor, containing: I just built a new laptop with Ubuntu 9 . I made sure xastir wasn't on it. I installed AX25 and then setup CVS and pulled down the latest version. After the CVS was done I preformed the following ./bootstrap.sh ./configure Make clean It fails right here Unknown Make or make Please read the Wiki HowTo for the version of Ubuntu you're using. There are more set-up steps you need to get all the tools that are required for building. -- Tom RussoKM5VY SAR502 DM64ux http://www.swcp.com/~russo/ Tijeras, NM QRPL#1592 K2#398 SOC#236http://kevan.org/brain.cgi?DDTNM The truth will set you free, but first it will piss you off. ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] 1.9.8 1.9.9
In a terminal, type sudo apt-get install build-essential. 73, Bob N7XY On Jul 13, 2010, at 8:59 AM, ml41782 wrote: I just built a new laptop with Ubuntu 9 . I made sure xastir wasn't on it. I installed AX25 and then setup CVS and pulled down the latest version. After the CVS was done I preformed the following ./bootstrap.sh ./configure Make clean It fails right here Unknown Make or make Make install Never gets here. What have a missed ? This is a fresh clean install of Linux and Xastir Mike ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] 1.9.8 1.9.9
build essentials was already there and up to date. Thanks From: Bob Nielsen n...@clearwire.net To: ml41782 ml41...@yahoo.com; Xastir - APRS client software discussion xastir@lists.xastir.org Sent: Tue, July 13, 2010 2:47:53 PM Subject: Re: [Xastir] 1.9.8 1.9.9 In a terminal, type sudo apt-get install build-essential. 73, Bob N7XY On Jul 13, 2010, at 8:59 AM, ml41782 wrote: I just built a new laptop with Ubuntu 9 . I made sure xastir wasn't on it. I installed AX25 and then setup CVS and pulled down the latest version. After the CVS was done I preformed the following ./bootstrap.sh ./configure Make clean It fails right here Unknown Make or make Make install Never gets here. What have a missed ? This is a fresh clean install of Linux and Xastir Mike ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] 1.9.8 1.9.9
./bootstrap.sh ./configure Make clean It fails right here Unknown Make or make Make install Never gets here. Unix is case sensitive, make sure you type make clean not Make clean? Chris. ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] 1.9.8 1.9.9
On Tue, Jul 13, 2010 at 2:07 PM, ml41782 ml41...@yahoo.com wrote: build essentials was already there and up to date. Thanks As Tom R. indicated earlier, there are instructions in the Wiki for the version of Ubuntu that you are using. The installation notes can be found at http://www.xastir.org/wiki/Installation_Notes#Ubuntu If you install the latest version of Ubuntu (10.04), there's a shell script available per the instructions that automates the installation. Regards, Lee - K5DAT Murphy, TX ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] Basic Questions
Thanks Curt, Your answers got me part of the way there. I have highlighted my responses below. Curt, WE7U wrote: On Sun, 11 Jul 2010, Tom wrote: I'm running the lastest rev. On a Mac Define latest rev. Latest binary package that someone did for a Mac? Latest stable source release? Latest development source release? CVS? If CVS, how long ago? Version 1.9.9 It was released about 2 weeks ago. 1. Does anyone have some examples of how to configure the TNC on a Kenwood TS-2000? That is a minimal Tasco-designed TNC like in the TH-D7A's and TM-D7[01]0's. Try one of these methods. Note that you can create all of these and just use one if you want to experiment. You can create up to 15 interfaces in Xastir: *) Interface-Interface Control-Add-Serial TNC Startup file: tnc-startup.d700 Stop file: tnc-stop.d700 *) Interface-Interface Control-Add-Serial TNC Startup file: tnc-startup.thd7 Stop file: tnc-stop.d700 *) Interface-Interface Control-Add-Serial KISS TNC Set the TNC to KISS mode before-hand *) Yet another option if running Linux: Set the TNC to KISS mode and run an AX25 TNC interface in Xastir. See our HOWTO for this on the Xastir website as it's a bit more complicated. Thanks Ill give these a try. 2. I have the OSM map up for my area but all that I get are lines with numbers. How do I get the objects and call signs to display? Are you using the online OSM maps or the downloaded Shapefile extracts from the OSM database? I've tried it with both the .osm maps and the geo maps. For APRS station/objects/items to display you'll need to have an interface up and running, RF or internet or both. I'm running one of each. This I have done. Once you have an interface up and are receiving packets you should start seeing stations on your map with the default settings. If you've messed with them already, the Station-Filter Data and Station-Filter Display menus would be the place to re-enable things. I have been through all of these settings and no luck. When I view the incoming data, I can see the stations, but nothing shows up on the map except blue lines with numbers. 3. How do I clear the map so that I can start fresh? Map-Map Chooser-Clear-Apply or Clear-OK (OK makes the dialog go away, Apply doesn't). I just want to clear of the received stations, not reset the maps. ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
Re: [Xastir] Basic Questions:wq
On Tue, 12 Jul 2010, Tom wrote: Are you using the online OSM maps or the downloaded Shapefile extracts from the OSM database? I've tried it with both the .osm maps and the geo maps. In the latest there are no *.osm maps anymore. You must have one of the versions just prior to that change. I have been through all of these settings and no luck. When I view the incoming data, I can see the stations, but nothing shows up on the map except blue lines with numbers. Probably a map grid. Map-Enable Map Grid 3. How do I clear the map so that I can start fresh? Map-Map Chooser-Clear-Apply or Clear-OK (OK makes the dialog go away, Apply doesn't). I just want to clear of the received stations, not reset the maps. Station-Configure-Clear All Stations -- Curt, WE7U. http://www.eskimo.com/~archer APRS: Where it's at!http://www.xastir.org Lotto: A tax on people who are bad at math. - unknown Windows: Microsoft's tax on computer illiterates. - WE7U. The world DOES revolve around me: I picked the coordinate system! ___ Xastir mailing list Xastir@lists.xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir