RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi Akio, Sorry for response late. It is very detailed instructions. :) I found my initrd doesn't preload xenblk.ko. Then it failed to create root device. Now I can create xenU too with your guide. Thank you so much. But did you notice xenU booting is a little slow? Best Regards, Yongkang (Kangkang) 永康 -Original Message- From: Akio Takebe [mailto:[EMAIL PROTECTED] Sent: 2006年9月22日 13:06 To: You, Yongkang; Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com; Akio Takebe Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi, Yongkang and all I can boot up domU by using my special initrd without vif. I think mkinitrd of fc6 make initrd by using dom0 infomation. (for example dom0's /etc/fstab, dom0's pci infomaition. ) So when xm boot domU, domU kernel don't use bootparmeter of domU. The below is a recipe of making my special inird 1. copy initrd # mkdir tmp # cp /boot/efi/efi/redhat/initrd-2.6.18-1.2679.fc6xenU.img tmp/ 2. expand inird # cd tmp # gzip -cd ../initrd-2.6.18-1.2679.fc6xenU.img |cpio -id 3. modify init in initrd # vi init insmod /lib/ohci-hcd.ko echo Loading ehci-hcd.ko module insmod /lib/ehci-hcd.ko mount -t usbfs /proc/bus/usb /proc/bus/usb echo Loading jbd.ko module insmod /lib/jbd.ko echo Loading ext3.ko module insmod /lib/ext3.ko #echo Loading scsi_mod.ko modulecomment out #insmod /lib/scsi_mod.ko comment out #echo Loading sd_mod.ko module comment out #insmod /lib/sd_mod.kocomment out #echo Loading scsi_transport_spi.ko module comment out #insmod /lib/scsi_transport_spi.kocomment out #echo Loading mptbase.ko module comment out #insmod /lib/mptbase.ko comment out #echo Loading mptscsih.ko modulecomment out #insmod /lib/mptscsih.ko comment out #echo Loading mptspi.ko module comment out #insmod /lib/mptspi.kocomment out echo Loading xenblk.ko module insmod /lib/xenblk.ko mkblkdevs #resume LABEL=SWAP-sda3 comment out echo Creating root device. mkrootdev -t ext3 -o defaults,ro sda1 change device to sda1 echo Mounting root filesystem. mount /sysroot echo Setting up other filesystems. setuproot echo Switching to new root and running init. switchroot 4. make new initrd # find . -print | cpio --quiet -c -o | gzip -9 ../initrd-new.img 5. my domU configuration kernel = /boot/efi/efi/redhat/vmlinuz-2.6.18-1.2679.fc6xen ramdisk = /xen/initrd-new.img memory = 1024 name = fc6.DomU #vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] root = /dev/sda1 ro extra = 4 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe selinux=0 rhgb 6. etc 6.1. copy modlues into domU image file # mount -o loop domU.img /mnt # cp -a /lib/modules/2.6.18-1.2679.fc6xen/ /mnt/lib/modules/ 6.2. disable selinux # vi /etc/sysconfig/selinux SELINUX=disabled change enforcing to disabled 6.3. modify /etc/fstab in domU.img /dev/sda1 / ext3defaults1 1 devpts/dev/pts devpts gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs defaults0 0 proc /proc procdefaults0 0 sysfs /sys sysfs defaults0 0 But I cannot use network on domU. I'll check the src.rpm of kernel-xen. Best Regards, Akio Takebe Hi Akio, Sorry for response late. I just tried with the config you provide (I changed xenU modprobe.conf and fstab). But unfortunately it still couldn't work. XenU booting still report can not find filesystem /dev/root/ and kernel panic. Well, after add ide0=noprobe etc. xenU won't complain to check hda, hdb etc. again. Thanks for this information. Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: Akio Takebe [mailto:[EMAIL PROTECTED] Sent: 2006ト・ヤツ21ネユ 10:18 To: Akio Takebe; You, Yongkang; Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi, Yongkang I have a small mistake. Please try the following configuration. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] this root = /dev/sda1 ro this extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe --- -this Best Regards, Akio Takebe Hi, Yongkang I think this issue is configuration mistakes. Can you try the following configuration? I cannot try it because I meet another issue... 1. /etc/modprobe.conf for initrd
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi, Yongkang Hi Akio, Sorry for response late. It is very detailed instructions. :) I found my initrd doesn't preload xenblk.ko. Then it failed to create root device. Now I can create xenU too with your guide. Thank you so much. But did you notice xenU booting is a little slow? Yes, starting sendmail is very slow. I also suspected dom0/domU hanged up. :-) Best Regards, Akio Takebe ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi Akio, Sorry for response late. I just tried with the config you provide (I changed xenU modprobe.conf and fstab). But unfortunately it still couldn't work. XenU booting still report can not find filesystem /dev/root/ and kernel panic. Well, after add ide0=noprobe etc. xenU won't complain to check hda, hdb etc. again. Thanks for this information. Best Regards, Yongkang (Kangkang) 永康 -Original Message- From: Akio Takebe [mailto:[EMAIL PROTECTED] Sent: 2006年9月21日 10:18 To: Akio Takebe; You, Yongkang; Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi, Yongkang I have a small mistake. Please try the following configuration. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] this root = /dev/sda1 ro this extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe --- -this Best Regards, Akio Takebe Hi, Yongkang I think this issue is configuration mistakes. Can you try the following configuration? I cannot try it because I meet another issue... 1. /etc/modprobe.conf for initrd of domU The following configuration would solve the issue of booting domU. [EMAIL PROTECTED] xen]# cat /etc/modprobe.conf #alias eth0 e1000 #alias scsi_hostadapter mptbase #alias scsi_hostadapter1 mptspi alias eth0 xennet this alias scsi_hostadapter xenblk and this 2. domU.conf The following configuration would solve the issue of probing ide disk. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,hda1,w' ] root = /dev/hda1 ro extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe this Best Regards, Akio Takebe Hi, I have reported 2 bugs to redhat bugzilla: [Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine. [Bug 207241] New: XenU domain can not be created successfully. New xenU created failure serial log has been pasted to the bug. I also notice FC6-test3 Xen0 operation is a little slower, compared with RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some heavy IO operations, Xen0 operations will be blocked for a while. I didn't track this to bugzilla. There are also a lot of unaligned accessing from some applications. They should be common FC6-test3 issues. Sometime Xen0 monitor will print Bug: soft lockup detected on CPU#0(or #1) Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of You, Yongkang Sent: 2006トsヤツ20ネユ 10:07 To: Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi Fred Yoshi, The former XenU creating failure issue seemed to be the config issue. Now I can create XenU. But XenU booting process met an old bug. It will cost a long time to check hard disk IRQ response from hda to hdh. After that, xenU met the problem of mounting root partition to start services, and then XenU booting failed (Kill init). I am not sure if it is because initrd issue. I will continue to check it. Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yang, Fred Sent: 2006トsヤツ20ネユ 8:26 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote」コ Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi, Yongkang and all I can boot up domU by using my special initrd without vif. I think mkinitrd of fc6 make initrd by using dom0 infomation. (for example dom0's /etc/fstab, dom0's pci infomaition. ) So when xm boot domU, domU kernel don't use bootparmeter of domU. The below is a recipe of making my special inird 1. copy initrd # mkdir tmp # cp /boot/efi/efi/redhat/initrd-2.6.18-1.2679.fc6xenU.img tmp/ 2. expand inird # cd tmp # gzip -cd ../initrd-2.6.18-1.2679.fc6xenU.img |cpio -id 3. modify init in initrd # vi init insmod /lib/ohci-hcd.ko echo Loading ehci-hcd.ko module insmod /lib/ehci-hcd.ko mount -t usbfs /proc/bus/usb /proc/bus/usb echo Loading jbd.ko module insmod /lib/jbd.ko echo Loading ext3.ko module insmod /lib/ext3.ko #echo Loading scsi_mod.ko modulecomment out #insmod /lib/scsi_mod.ko comment out #echo Loading sd_mod.ko module comment out #insmod /lib/sd_mod.kocomment out #echo Loading scsi_transport_spi.ko module comment out #insmod /lib/scsi_transport_spi.kocomment out #echo Loading mptbase.ko module comment out #insmod /lib/mptbase.ko comment out #echo Loading mptscsih.ko modulecomment out #insmod /lib/mptscsih.ko comment out #echo Loading mptspi.ko module comment out #insmod /lib/mptspi.kocomment out echo Loading xenblk.ko module insmod /lib/xenblk.ko mkblkdevs #resume LABEL=SWAP-sda3 comment out echo Creating root device. mkrootdev -t ext3 -o defaults,ro sda1 change device to sda1 echo Mounting root filesystem. mount /sysroot echo Setting up other filesystems. setuproot echo Switching to new root and running init. switchroot 4. make new initrd # find . -print | cpio --quiet -c -o | gzip -9 ../initrd-new.img 5. my domU configuration kernel = /boot/efi/efi/redhat/vmlinuz-2.6.18-1.2679.fc6xen ramdisk = /xen/initrd-new.img memory = 1024 name = fc6.DomU #vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] root = /dev/sda1 ro extra = 4 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe selinux=0 rhgb 6. etc 6.1. copy modlues into domU image file # mount -o loop domU.img /mnt # cp -a /lib/modules/2.6.18-1.2679.fc6xen/ /mnt/lib/modules/ 6.2. disable selinux # vi /etc/sysconfig/selinux SELINUX=disabled change enforcing to disabled 6.3. modify /etc/fstab in domU.img /dev/sda1 / ext3defaults1 1 devpts/dev/pts devpts gid=5,mode=620 0 0 tmpfs /dev/shm tmpfs defaults0 0 proc /proc procdefaults0 0 sysfs /sys sysfs defaults0 0 But I cannot use network on domU. I'll check the src.rpm of kernel-xen. Best Regards, Akio Takebe Hi Akio, Sorry for response late. I just tried with the config you provide (I changed xenU modprobe.conf and fstab). But unfortunately it still couldn't work. XenU booting still report can not find filesystem /dev/root/ and kernel panic. Well, after add ide0=noprobe etc. xenU won't complain to check hda, hdb etc. again. Thanks for this information. Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: Akio Takebe [mailto:[EMAIL PROTECTED] Sent: 2006ト\xF3ヤツ21ネユ 10:18 To: Akio Takebe; You, Yongkang; Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi, Yongkang I have a small mistake. Please try the following configuration. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] this root = /dev/sda1 ro this extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe --- -this Best Regards, Akio Takebe Hi, Yongkang I think this issue is configuration mistakes. Can you try the following configuration? I cannot try it because I meet another issue... 1. /etc/modprobe.conf for initrd of domU The following configuration would solve the issue of booting domU. [EMAIL PROTECTED] xen]# cat /etc/modprobe.conf #alias eth0 e1000 #alias scsi_hostadapter mptbase #alias scsi_hostadapter1 mptspi alias eth0 xennet this alias scsi_hostadapter xenblk and this 2. domU.conf The following configuration would solve the issue of probing ide disk. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi, Yongkang I think this issue is configuration mistakes. Can you try the following configuration? I cannot try it because I meet another issue... 1. /etc/modprobe.conf for initrd of domU The following configuration would solve the issue of booting domU. [EMAIL PROTECTED] xen]# cat /etc/modprobe.conf #alias eth0 e1000 #alias scsi_hostadapter mptbase #alias scsi_hostadapter1 mptspi alias eth0 xennet this alias scsi_hostadapter xenblk and this 2. domU.conf The following configuration would solve the issue of probing ide disk. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,hda1,w' ] root = /dev/hda1 ro extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe this Best Regards, Akio Takebe Hi, I have reported 2 bugs to redhat bugzilla: [Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine. [Bug 207241] New: XenU domain can not be created successfully. New xenU created failure serial log has been pasted to the bug. I also notice FC6-test3 Xen0 operation is a little slower, compared with RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some heavy IO operations, Xen0 operations will be blocked for a while. I didn't track this to bugzilla. There are also a lot of unaligned accessing from some applications. They should be common FC6-test3 issues. Sometime Xen0 monitor will print Bug: soft lockup detected on CPU#0(or #1) Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of You, Yongkang Sent: 2006ト\xF3ヤツ20ネユ 10:07 To: Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi Fred Yoshi, The former XenU creating failure issue seemed to be the config issue. Now I can create XenU. But XenU booting process met an old bug. It will cost a long time to check hard disk IRQ response from hda to hdh. After that, xenU met the problem of mounting root partition to start services, and then XenU booting failed (Kill init). I am not sure if it is because initrd issue. I will continue to check it. Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yang, Fred Sent: 2006ト\xF3ヤツ20ネユ 8:26 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote」コ Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. Best Regards, Yongkang (Kangkang) モタソオ ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel ___ Xen-ia64-devel mailing list Xen-ia64-devel
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi, Yongkang I have a small mistake. Please try the following configuration. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,sda1,w' ] this root = /dev/sda1 ro this extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe --- -this Best Regards, Akio Takebe Hi, Yongkang I think this issue is configuration mistakes. Can you try the following configuration? I cannot try it because I meet another issue... 1. /etc/modprobe.conf for initrd of domU The following configuration would solve the issue of booting domU. [EMAIL PROTECTED] xen]# cat /etc/modprobe.conf #alias eth0 e1000 #alias scsi_hostadapter mptbase #alias scsi_hostadapter1 mptspi alias eth0 xennet this alias scsi_hostadapter xenblk and this 2. domU.conf The following configuration would solve the issue of probing ide disk. kernel = vmlinuz-2.6.17-1.2630.fc6xen ramdisk = initrd-2.6.17-1.2630.fc6xenU.img memory = 512 name = domU vif = [ '' ] disk = [ 'file:/xen/image/fc6.root.img,hda1,w' ] root = /dev/hda1 ro extra = 3 ide0=noprobe ide1=noprobe ide2=noprobe ide3=noprobe this Best Regards, Akio Takebe Hi, I have reported 2 bugs to redhat bugzilla: [Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine. [Bug 207241] New: XenU domain can not be created successfully. New xenU created failure serial log has been pasted to the bug. I also notice FC6-test3 Xen0 operation is a little slower, compared with RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some heavy IO operations, Xen0 operations will be blocked for a while. I didn't track this to bugzilla. There are also a lot of unaligned accessing from some applications. They should be common FC6-test3 issues. Sometime Xen0 monitor will print Bug: soft lockup detected on CPU#0(or #1) Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of You, Yongkang Sent: 2006トsヤツ20ネユ 10:07 To: Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi Fred Yoshi, The former XenU creating failure issue seemed to be the config issue. Now I can create XenU. But XenU booting process met an old bug. It will cost a long time to check hard disk IRQ response from hda to hdh. After that, xenU met the problem of mounting root partition to start services, and then XenU booting failed (Kill init). I am not sure if it is because initrd issue. I will continue to check it. Best Regards, Yongkang (Kangkang) モタソオ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yang, Fred Sent: 2006トsヤツ20ネユ 8:26 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote」コ Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0
Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote: Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. Best Regards, Yongkang (Kangkang) 永康 ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote: Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. Best Regards, Yongkang (Kangkang) 永康 ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel gnome-settings-(3187): unaligned access to 0x6eb9f3ec, ip=0x21cb ada0 gnome-settings-(3187): unaligned access to 0x6eb9f3ec, ip=0x21cb ada0 (XEN) ### domain f7c68080: rid=8-c mp_rid=2000 (XEN) arch_domain_create: domain=f7c68080 (XEN) DomainU EFI build up: ACPI 2.0=0x1000 (XEN) dom mem: type=13, attr=0x8008, range=[0x-0x000 01000) (4KB) (XEN) dom mem: type=10, attr=0x8008, range=[0x1000-0x000 02000) (4KB) (XEN) dom mem: type= 6, attr=0x8008, range=[0x2000-0x000 03000) (4KB) (XEN) dom mem: type= 7, attr=0x0008, range=[0x3000-0x000 00fff4000) (255MB) (XEN) dom mem: type=12, attr=0x0001, range=[0x0c00-0x000 01000) (64MB) (XEN) vcpu_get_lrr0: Unmasked interrupts unsupported (XEN) vcpu_get_lrr1: Unmasked interrupts unsupported (XEN) Linux version 2.6.17-1.2630.fc6xen ([EMAIL PROTECTED]) ( gcc version 4.1.1 20060828 (Red Hat 4.1.1-20)) #1 SMP Wed Sep 6 16:30:45 EDT 200 6 EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x1000 rsvd_region[0]: [0xe0002228, 0xe00022f0) rsvd_region[1]: [0xe0003000, 0xe0003030) rsvd_region[2]: [0xe400, 0xe4c187a3) rsvd_region[3]: [0xefff4000, 0xefff8000) rsvd_region[4]: [0x, 0x) SAL 0.1: Xen/ia64 Xen/ia64 version 0.0 SAL: AP wakeup using external interrupt vector 0xf3 xen_pal_emulator: UNIMPLEMENTED PAL CALL 42 (XEN) No logical to physical processor mapping available bootmem alloc of 67141632 bytes failed! Kernel panic - not syncing: Out of memory ### domain f4fb0080: rid=8-c mp_rid=2000 (XEN) arch_domain_create: domain=f4fb0080 (XEN) DomainU EFI build up: ACPI 2.0=0x1000 (XEN) dom mem: type=13, attr=0x8008, range=[0x-0x000 01000) (4KB) (XEN) dom mem: type=10, attr=0x8008, range=[0x1000-0x000 02000) (4KB) (XEN) dom mem: type= 6, attr=0x8008, range=[0x2000-0x000 03000) (4KB) (XEN) dom mem: type= 7, attr=0x0008, range=[0x3000-0x000 00fff4000) (255MB) (XEN) dom mem: type=12, attr=0x0001, range=[0x0c00-0x000 01000) (64MB) (XEN) vcpu_get_lrr0: Unmasked interrupts unsupported (XEN) vcpu_get_lrr1: Unmasked interrupts unsupported (XEN) Linux version 2.6.17-1.2630.fc6xen ([EMAIL PROTECTED]) ( gcc version 4.1.1 20060828 (Red Hat 4.1.1-20)) #1 SMP Wed Sep 6 16:30:45 EDT 200 6 EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x1000 rsvd_region[0]: [0xe0002228, 0xe00022f0) rsvd_region[1
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi Fred Yoshi, The former XenU creating failure issue seemed to be the config issue. Now I can create XenU. But XenU booting process met an old bug. It will cost a long time to check hard disk IRQ response from hda to hdh. After that, xenU met the problem of mounting root partition to start services, and then XenU booting failed (Kill init). I am not sure if it is because initrd issue. I will continue to check it. Best Regards, Yongkang (Kangkang) 永康 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yang, Fred Sent: 2006年9月20日 8:26 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote: Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. Best Regards, Yongkang (Kangkang) 永康 ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel
RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result
Hi, I have reported 2 bugs to redhat bugzilla: [Bug 207227] New: Xen0 reboot command can not reboot Tiger4 machine. [Bug 207241] New: XenU domain can not be created successfully. New xenU created failure serial log has been pasted to the bug. I also notice FC6-test3 Xen0 operation is a little slower, compared with RHEL4u3. I assign 2 vcpus to Xen0. When I destroy domains or do some heavy IO operations, Xen0 operations will be blocked for a while. I didn't track this to bugzilla. There are also a lot of unaligned accessing from some applications. They should be common FC6-test3 issues. Sometime Xen0 monitor will print Bug: soft lockup detected on CPU#0(or #1) Best Regards, Yongkang (Kangkang) 永康 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of You, Yongkang Sent: 2006年9月20日 10:07 To: Yang, Fred; [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Hi Fred Yoshi, The former XenU creating failure issue seemed to be the config issue. Now I can create XenU. But XenU booting process met an old bug. It will cost a long time to check hard disk IRQ response from hda to hdh. After that, xenU met the problem of mounting root partition to start services, and then XenU booting failed (Kill init). I am not sure if it is because initrd issue. I will continue to check it. Best Regards, Yongkang (Kangkang) 永康 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Yang, Fred Sent: 2006年9月20日 8:26 To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: RE: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Here it comes! -Fred -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 19, 2006 4:23 PM To: Yang, Fred; [EMAIL PROTECTED] Cc: xen-ia64-devel@lists.xensource.com Subject: Re: [Xen-ia64-devel] [Fedora-ia64-list] FC6 Test3 Xen test result Fred, Yongkang, Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. I can't find the attachment. Could you repost the serial log? Thanks, Yoshi Oguchi Yang, Fred [EMAIL PROTECTED] wrote: Following is the quick Xen test result with FC6 Test3. We will file BZ for the issues tonight; the early data is to get community to fix Xen issues ASAP Thanks, -Fred I have followed Redhat instructions (FC6-test3 can not be installed from CDs) to install FC6-Test3 and do some testing. Both Xen0 and VTI can all boot up, but XenU couldn't be created successfully. Detailed Items: 1. Using yum to upgrade FC6 Test2 to FC6 Test3[almost Pass] need manually reinstall kernel-xen rpm package. 2. Boot Native Linux of FC6 Test3 [Pass] 3. Boot Xen of FC6 Test3 [Pass] 4. xend and xm commands are working.[Pass] 5. XenU Domain creating failed. [__FAIL__] 6. Missing VTI guest firmware (/usr/lib/xen/boot/guest_firmware.bin) [__FAIL__ (expected)] 7. After manually copy VTI guest firmware, creating VTI domain [Pass] 8.VTI domain with network supported [Pass] 9.2 VTI domains coexisting testing [Pass] 10. Linux Kernel build in VTI domain [Pass] 11. LTP testing in VTI domain [Pass] 12. SMP VTI domain [Pass] 13. SMP Xen0 [Pass] 14. 1 VTI Windows 2k3 [Pass] a little slower. 15. 1 VTI Linux + 1 VTI Windows[__FAIL__ VTI Windows blue screen] 16. Reboot machine failed with Xen FC6-test3. [__FAIL__] Other issues: 1) Xen0 operation is a little slower than RHEL4u3. 2) XenU creating failure, please see attachment for the serial output. Best Regards, Yongkang (Kangkang) 永康 ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel ___ Xen-ia64-devel mailing list Xen-ia64-devel@lists.xensource.com http://lists.xensource.com/xen-ia64-devel