[XFree86] startx Problem Linux Redhat 8.0
Hi [EMAIL PROTECTED] log]# cat XFree86.0.log |more _XSERVTransSocketINETCreateListener: ...SocketCreateListener() failed _XSERVTransMakeAllCOTSServerListeners: server already running Fatal server error: Cannot establish any listening sockets - Make sure an X server isn't already run ning When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file "/var/log/XFree86.0.log". Please report problems to [EMAIL PROTECTED] Thanks & Regards, Ranjan Khot BMC Software India Pvt. Ltd. 6th floor, Muttha Chambers, Senapati Bapat Road, Pune, INDIA 411 016 *+91-20-403-5000Ext 5249 [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Fatal Error
Hello, I'm trying to install Linux on a Dell Inspiron 1100. Everything works, but the display takes only the center %60 of the screen. I have an A22 bios, Linux Kernel version 2.4.20-8. I'm running RedHat 9.0 and XFree86 Version 4.3.0 (Red Hat Linux release 4.3.0-2). I have an Intel I845GL chip with driver "i810". I have tried to apply a patch that I found online called 845 patch but it still does not work. When I boot it gives me errors: (EE) I810(0): No Video BIOS modes for chosen depth. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Is there a patch that you know of with detailed instructions? I'm fairly new to Linux so I don't want to screw anything up. Thanks, Alex Joyner ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Error running startx
Hello i've updated my Mandrake with URPMI and after i restart my laptop and X does not start anymore. this is the error hope you can help me -- --- O meu maior inimigo ofereceu-me uma cópia do Windows pelo Natal... Micro$oft sells you windows, Linux gives you the whole house. Proud Linux User #22456897 XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF] Build Date: 12 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Sep 15 22:31:07 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (WW) Option "XkbCompat" requires an string value (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "pt" (**) XKB: layout: "pt" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7192 card 0e11,0460 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:07:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:07:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:07:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:08:0: chip 102c,00e5 card 0e11,b049 rev a8 class 03,00,00 hdr 00 (II) PCI: 00:11:0: chip 104c,ac17 card 4000, rev 02 class 06,07,00 hdr 82 (II) PCI: 00:11:1: chip 104c,ac17 card 4800, rev 02 class 06,07,00 hdr 82 (II) PCI: 01:00:0: chip 104c,8400 card 104c,8402 rev 00 class 02,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 1: bridge is at (0:17:0), (0,1,1), BCTRL: 0x0500 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x4000 - 0x40ff (0x100) IX[B] [1] -1 0 0x4400 - 0x44ff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0x1040 - 0x107f (0x40) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x1000 - 0x103f (0x40) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (0:17:1), (0,2,2), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x4800 - 0x48ff (0x100) IX[B] [1] -1 0 0x4c00 - 0x4cff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0x10c0 - 0x10ff (0x40) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0x1080 - 0x10bf (0x40) MX[B] (--) PCI:*(0:8:0) Chips and Technologies F6 HiQVPro rev 168, Mem @ 0x4000/24 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) MX[B](B) [1] -1 0 0x0010 - 0x3fff (0x3ff0) MX[B]E(B) [2] -1 0 0x000f - 0x000f (0x1) MX[B] [3] -1 0 0x000c - 0x000e (0x3) MX[B] [4] -1 0 0x - 0
[XFree86] error
Hello, I am French thus excuse me for the many faults... I did not succeed in starting linux redhat 9 after having apparement made a success of the installation, here is the error message. While esperant that you managed to help me. Thank you in advance. XFree86 Version 4.3.0 (Red Hat Linux release : 4.3.0-2)Release Date : 27 Febryary 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System : Linux 2.4.20-3bigmem i686 [ELF]Build Date : 27 February 2003Build Host : porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ To make sure that you have the latest version.Module loader presentOS Kernel : Linux version 2.4.20-8 ([EMAIL PROTECTED])Markers : (--) probed, (**) from config file, (==) default setting, (++) from command line, ( ! !) notice, (II) informational , (WW) warning, (EE) eror, (NI) not inplemented, ( ? ?) unknow.(==) Log file : « /var/log/XFree86.0.log », Time : Sun Sep 14 15 :35 :49 2003(==) Using config file : « /etc/X11/XF86Config »(EE) RADEON(0) : No valid mode found for this DFP/LCD(EE Screens(s) found, but none have usable configuration. Fatal server error :No screens found IncrediMail - La messagerie électronique a enfin évolué - Cliquer ici
[XFree86] Re: Trouble to load REDHAT LINUX in P4 machine
On Mon, 15 Sep 2003, [iso-8859-1] Shobhan Mandal wrote: >Date: Mon, 15 Sep 2003 06:57:42 +0100 (BST) >From: "[iso-8859-1] Shobhan Mandal" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >Content-Type: multipart/alternative; >boundary="0-85811815-1063605462=:40409" >Subject: Trouble to load REDHAT LINUX in P4 machine >I have a P4(1.7 Ghz) machine having INTEL Original 845 GLAD >motherboard . I have tried to load linux 8.2 in my machine.I can ^ There is no such thing as Red Hat Linux 8.2. Valid Red Hat Linux releases are 7.1, 7.2, 7.3, 8.0, and 9. If your system has Intel i845 integrated graphics on it, and you're trying to use that, you will need to install Red Hat Linux 9, as i845 is not supported on earlier releases. -- Mike A. Harris ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] error
Hello, I am French thus excuse me for the many faults... I did not succeed in starting linux redhat 9 after having apparement made a success of the installation, here is the error message. While esperant that you managed to help me. Thank you in advance. XFree86 Version 4.3.0 (Red Hat Linux release : 4.3.0-2)Release Date : 27 Febryary 2003X Protocol Version 11, Revision 0, Release 6.6Build Operating System : Linux 2.4.20-3bigmem i686 [ELF]Build Date : 27 February 2003Build Host : porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ To make sure that you have the latest version.Module loader presentOS Kernel : Linux version 2.4.20-8 ([EMAIL PROTECTED])Markers : (--) probed, (**) from config file, (==) default setting, (++) from command line, ( ! !) notice, (II) informational , (WW) warning, (EE) eror, (NI) not inplemented, ( ? ?) unknow.(==) Log file : « /var/log/XFree86.0.log », Time : Sun Sep 14 15 :35 :49 2003(==) Using config file : « /etc/X11/XF86Config »(EE) RADEON(0) : No valid mode found for this DFP/LCD(EE Screens(s) found, but none have usable configuration. Fatal server error :No screens found IncrediMail - La messagerie électronique a enfin évolué - Cliquer ici
[XFree86] X server crash
Hi, I am using XFree86 version 4.3.0 on Red Hat Linux 9 (release 4.3.0-2). Many times, after restarting my laptop, the X server is unable to start up giving an error that it is unable to load base modules 'bitmap' and 'pcidata'. I am also using Windows XP SP1 professional edition on my laptop.. The server crash often occurs when I boot Linux after having used Windows on my previous boot. I have been unable to solve the crash problem by no means other than having to reinstall RedHat on my laptop again.. The upgrade installation of X Server is not able to work as it terminates with an error. Could you kindly look into this problem and let me know what can be done (if there is a solution to it)? I have included the log report generated as an attachment to this mail. Also, please do contact me if you require any details regarding the problem. Thanks in advance, Regards, Kumar Gaurav. Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software XFree86.0.log Description: XFree86.0.log
[XFree86] Problem with S3 ProSavage DDR video card with Redhat Linux 7.2
Hello, I cannot find the driver in the X-Configurator (setup) for S3 ProSavage DDR video card in Redhat Linux 7.2. Please guide me with what to do. Thanking you.
Re: [XFree86] FW: X.Org HELP: Help on X-server
We need to see the /var/log/XFree86.0.log file. Mark. On Mon, 15 Sep 2003, xkj wrote: > Dear Sir, > > As Mr Howard advised, I have forwarded my question to you. > > Please help me solve this irritating problem. > > Many Thanks. > XKJ > > -Original Message- > From: X.Org Info [mailto:[EMAIL PROTECTED] > Sent: Monday, September 15, 2003 8:51 PM > To: XKJ > Subject: Re: X.Org HELP: Help on X-server > > XKJ, > > The best place to send a request like this is to the general mail list at > XFree86. Someone on that list, may have already encountered the problems > you are seeing. Send an email to mailto:[EMAIL PROTECTED], and someone on > that list should be able to help you. > > Howard > For X.Org. > > > At 08:35 15/09/2003 +0100, XKJ wrote: > >I would like to configure X-windows on my linux, and I am a complete > newbie. > >Thus, I am quite puzzled by Errors when I want to startx and The screen > >gives me many problems. > >Some notion tells me that I must use xf86config to edit my settings but I > >cannot find the correct settings for my video settings. > >I can also see that the X11 addon I have downloaded from my linux website > >is working as the screen moves with my mouse. Yet, I see a jumbled screen. > >Please help me. > > > >My computers have the following configuration: > >NVIDIA GeForce2 MX-400 64mb AGP Graphics card > >Acer FP555 LCD Monitor > >MuLinux(http://mulinux.sunsite.dk/) > >And I run Windows. I also have 256mb RDRAM and I used the same > >configuration for my swap file. > > > >BTW, I also encountered problems as I tried to install downloaded files to > >update XFree86 and stuff like that.If I need to update, please tel me how > also. > > > >Thank You very very much > > > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 > ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Xvfb and DGA
Hi list, and people! ;-) Currently, my home-built Xvfb does not support DGA extensions. Is this a flaw in my config files (for built or for run-time), or does Xvfb definitely support no DGA extension? Is there a plan on supporting DGA extensions in Xvfb? If so, who is in charge? If not, woud that be feasible? What amount of work? TIA. Regards, Yann. -- .-..--.. | Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: | | +0/33 662376056 | Software Designer | \ / CAMPAIGN | ___ | | --==< °_° >==-- °---.: X AGAINST | \e/ There is no | | web: ymorin.free.fr | [EMAIL PROTECTED] 2140 | / \ HTML MAIL| v conspiracy. | °-°°--°° \__ np: H.F. Thiéfaine - L'ascenseur de 22h43 (1ère partie) _/ ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] hekp
hekp _ Get a FREE computer virus scan online from McAfee. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] FW: X.Org HELP: Help on X-server
Dear Sir, As Mr Howard advised, I have forwarded my question to you. Please help me solve this irritating problem. Many Thanks. XKJ -Original Message- From: X.Org Info [mailto:[EMAIL PROTECTED] Sent: Monday, September 15, 2003 8:51 PM To: XKJ Subject: Re: X.Org HELP: Help on X-server XKJ, The best place to send a request like this is to the general mail list at XFree86. Someone on that list, may have already encountered the problems you are seeing. Send an email to mailto:[EMAIL PROTECTED], and someone on that list should be able to help you. Howard For X.Org. At 08:35 15/09/2003 +0100, XKJ wrote: >I would like to configure X-windows on my linux, and I am a complete newbie. >Thus, I am quite puzzled by Errors when I want to startx and The screen >gives me many problems. >Some notion tells me that I must use xf86config to edit my settings but I >cannot find the correct settings for my video settings. >I can also see that the X11 addon I have downloaded from my linux website >is working as the screen moves with my mouse. Yet, I see a jumbled screen. >Please help me. > >My computers have the following configuration: >NVIDIA GeForce2 MX-400 64mb AGP Graphics card >Acer FP555 LCD Monitor >MuLinux(http://mulinux.sunsite.dk/) >And I run Windows. I also have 256mb RDRAM and I used the same >configuration for my swap file. > >BTW, I also encountered problems as I tried to install downloaded files to >update XFree86 and stuff like that.If I need to update, please tel me how also. > >Thank You very very much ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Saphire Radeon 9600 Atlantis
HW 3D is only supported on ati's driver. the opensource radeon driver only supports 2D on your card. the error you are getting is suspect is due to the flx module not being loaded. in your config file in the modules section make sure the glx module is listed; if not, add it. Alex -- Hello, Can someone please tell me if there is a 3D driver available for this card under linux? I have tried everything from the drivers at ATI.com, to the ones on the germany site, schneir.com (or something like that), to the dri website and nothing seems to work. I have also tried fglrx.o, ati.o, and radeon.o to no avail. 2D works great, but I get the generic error message: Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0". Video mode set failed: Couldn't find matching GLX visual when I try to kick off an opengl application. Here are my X logs. This is a run with the radeon driver. Pretty much any driver yields the same results. I am using XFree86 4.3.0. Kernel 2.4.20-20.9. I have no exotic hardware (SB Live!, Athlon 1900+). This is the latest greatest offering from Redhat 9 with all released updates applied. I bought this card to do opengl development, so you can guess my disappointment. Thank you for your consideration. Bill Whitaker __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Radeon 7500 mobile and dualhead in xfree86 4.3.0
Remove the 'videoram' lines from your config. Also you may want to set both BusID's to PCI:1:0:0 If you want HW accelerated 3D on both head you may want to consider my mergedfb patch: http://bugs.xfree86.org/show_bug.cgi?id=276 Alex Hi! I got a compaq evi n800c with ati radeon 7500 mobile. I've tried to get it up with Xinerama, first I got the second screen to clone the \ first, but thats no problem, but when I tried to move a window from the first screen \ to the second, it worked! But the picture got messed up.. Now I've played around with the XF86Config, and now it just clone the first screen... Before I did all this, if I use a movieplayer width sdl, xv I got a picture on the \ laptop monitor but not external one.. So, what I want to do is: Get my external monitor to be a second monitor (not clone). I want it to have one \ desktop on each monitor.. Here is my config file: Section "Module" Load"dbe" # Double buffer extension Load"type1" Load"speedo" Load"freetype" Load"xtt" Load "glx" Load "dri" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" EndSection Section "ServerFlags" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "AutoRepeat" "500 30" Option "XkbRules" "xfree86" Option "XkbModel" "pc105" Option "XkbLayout" "no" Option "XkbVariant" "nodeadkeys" EndSection Section "InputDevice" Identifier "Mouse2" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol""PS/2" Option "Device" "/dev/mouse" Option "Emulate3Buttons" EndSection Section "Monitor" Identifier "laptop" #HorizSync 30-81 #VertRefresh 56-85 EndSection Section "Monitor" Identifier "samsung 191T" HorizSync 30-81 VertRefresh 56-85 EndSection Section "Device" Identifier "Radeon0" VendorName "ATI" Option "AGPMode" "4" #Option "AGPFastWrite" "True" #Option "EnablePageFlip" "True" Driver "radeon" VideoRam65536 Option "MonitorLayout" "LVDS" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Radeon1" VendorName "ATI" Driver "radeon" Option "MonitorLayout" "TMDS" VideoRam65536 BusID "PCI:1:0:1" Screen 1 EndSection Section "Screen" Identifier "Radeon0" Device "Radeon0" Monitor "laptop" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "Screen" Identifier "Radeon1" Device "Radeon1" Monitor "samsung 191T" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "Simple Layout" Option "Xinerama" Screen 0 "Radeon0" Screen 1 "Radeon1" RightOf "Radeon0" InputDevice "Mouse1" "CorePointer" InputDevice "Mouse2" "SendCoreEvents" InputDevice "Keyboard1" "CoreKeyboard" EndSection Section "DRI" Mode 0666 EndSection Can anyone help me?? __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Lacking organization
Dan Mergens writes: > Egbert, > > There is enough information out there if you're an experience google > search and have a day to search through all the bad information and > unanswered questions. What is really needed is clear organization and > links to the helpful sites such as the one you mentioned. > You are welcome to use the site I've mentioned to add some helpful links. The problem with many such links is that they contain only workarounds - the real problem often doesn't get addressed. I try to monitor the site I mentioned from time to time and check if the anwers given there appear to be correct. I cannot however monitor any help page on the internet or any link added to this site. The benefit of this site is however that you (and the others on this list) can become active and don't have to wait for a web master to become active. Therefore information can be added and corrected quickly. If you help me to make this site more known it may actually become useful some day. If that will happen at all and how useful it will become is up to you all. There is really no barrier that would stop you from helping. Egbert. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Update problems with 4.3
XFree Folks, I am running Woody stable with XFree 4.3. After doing a recent stable update, X has not run properly - poor color depth and no mouse control. I can't figure out what has changed. Any suggestions? Richard ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] xf86openconsole fail
Hi Using my regular X11 4.3 runing kernel mandrake 2.4.13 on 9.1 version it's perfect. But runing my compiled kernel 2.4.22 I get the stuff like VT_ACTIVE VT_WAITACTIVATE VT_GETMODE failed and XIO fatal IO error 104 more info if you want to have even trace. thanks red1 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE : [XFree86] sis 305 agp video drivers or configuration
Hi phil, Why don't you try Xconfigurator in no probe mode and then specify your own drivers. I would trust Xconfigurator --expert is the switch. Try man Xconfigurator and use the best mode. Thanks, Satej At Mon, 15 Sep 2003 00:17:35 -0700 (PDT), philip mbogo <[EMAIL PROTECTED]> wrote: Hello. I have redhat 9.0 installation but I cant get to configure my sis 305 graphics card or even to locatedrivers for it. please inform me of how I can get to configure the graphics on my machine or a possible source of drivers since sis 305 is not among the chipsets supported by your X server. Thank you in advance. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 Yours Forever, Satej J A Tel: 9886131429 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] report a crash of the x-server
Dear Supporter, I want to report a crash of the x-server (non-reparable). I’ve attached the responding log file. Can you help me to solve that problem? Thanks a lot. Lars. XFree86.0.log Description: Binary data
Re: [XFree86] trident9385 problem ;(
On Wed, Jan 01, 1997 at 02:10:41AM +0300, Alexei Brazhe wrote: > Hello to everyone. > I tried to use Xfree 4.3 on my laptop > with trident cyber9385, but > when i use startx, I get the message, > that trident cyber9385 is not supported, > but it should be if I am not mistaken. > I am using Xfree package from Slackware 9.0 > distro. > If anyone could help... The cyber9385 is most certainly supported in XFree86 4.3.0. Can you please send the log from /var/log/XFree86.0.log Alan. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] trident9385 problem ;(
Hello to everyone. I tried to use Xfree 4.3 on my laptop with trident cyber9385, but when i use startx, I get the message, that trident cyber9385 is not supported, but it should be if I am not mistaken. I am using Xfree package from Slackware 9.0 distro. If anyone could help... ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Trouble to load REDHAT LINUX in P4 machine
On Mon, 15 Sep 2003, Shobhan Mandal wrote: > I have a P4(1.7 Ghz) machine having INTEL Original 845 GLAD > motherboard. I have tried to load linux 8.2 in my machine. I can not Install the new X OR download the driver for Intel845 from http://support.intel.com/support/graphics/linux/graphics.htm HTH :) -- Bharathi S, IndLinuX Team, (__) DON Lab,TeNeT Group, oo ) IIT-Madras, Chennai-INDIA. (_/\ Known is DROP, Unknown is OCEAN. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] sis 305 agp video drivers or configuration
Hello. I have redhat 9.0 installation but I cant get to configure my sis 305 graphics card or even to locatedrivers for it. please inform me of how I can get to configure the graphics on my machine or a possible source of drivers since sis 305 is not among the chipsets supported by your X server. Thank you in advance. __ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
