I recently upgraded my computer (from FreeBSD 3.1 to 5.1), and now my monitor will not go into "suspend" mode; it stays in "standby".
I have this in my .xsession: xset s 300 s blank dpms 1200 3600 So after 20 minutes, the monitor should go into "standby" mode, then after an hour into "suspend" mode; this was working previously. Now however, after my upgrade, it will go standby but never suspend. Even when I do "xset dpms force suspend", it goes into standby and stays there. An "xset q" in this state says the monitor is in "Suspend" state, even though it isn't. Video board is a tdfx voodoo3-2000, monitor is a NEC Multisync E950. Has anybody seen this before? Is there a fix? The OS is FreeBSD 5.1-RELEASE, here is the XF86 info: XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.1 i386 [ELF] Build Date: 24 May 2003 I'm including my log and config files as mime-attachments. Help! :-) -Guy
XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: FreeBSD 5.1 i386 [ELF] Build Date: 24 May 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Fri Jun 13 00:44:40 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "MultiSync E950" (**) | |-->Device "Voodoo3 (generic)" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "omnikey101" (**) XKB: model: "omnikey101" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (**) Option "XkbOptions" "ctrl:swapcaps" (**) XKB: options: "ctrl:swapcaps" (==) Keyboard: CustomKeycode disabled (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 2.0) (--) using VT number 5 (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on freebsd (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00 (II) PCI: 00:04:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00 (II) PCI: 00:06:0: chip 9005,001f card 9005,000f rev 00 class 01,00,00 hdr 00 (II) PCI: 00:07:0: chip 8086,1229 card 8086,0008 rev 05 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 1274,5000 card 4942,4c4c rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 11ad,0002 card 1385,f004 rev 21 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 121a,0005 card 121a,0030 rev 01 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0088 (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xde000000 - 0xe0dfffff (0x2e00000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe1f00000 - 0xe3ffffff (0x2100000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) 3Dfx Interactive, Inc. Voodoo 3 rev 1, Mem @ 0xde000000/25, 0xe2000000/25, I/O @ 0xd800/8, BIOS @ 0xe1ff0000/16 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) PCI Memory resource overlap reduced 0xe4000000 from 0xe7ffffff to 0xe3ffffff (II) PCI Memory resource overlap reduced 0xe1000000 from 0xe1ffffff to 0xe17fffff (II) Active PCI resource ranges: [0] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [1] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [2] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [4] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [5] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [6] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [7] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [8] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [9] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [10] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [11] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [1] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [2] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [3] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [4] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [5] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [6] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [7] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [8] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [9] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [10] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [11] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [12] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [13] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [6] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [7] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [9] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [10] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [11] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [15] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [16] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [17] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [18] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [19] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.2 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "type1" (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.2 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Type1 (II) Loading font CID (II) LoadModule: "speedo" (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.1 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Speedo (II) LoadModule: "tdfx" (II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o (II) Module tdfx: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.4 (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee, 3dfx Voodoo3, 3dfx Voodoo5 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset 3dfx Voodoo3 found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [6] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [7] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [9] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [10] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [11] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [14] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [15] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [16] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [17] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [18] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [19] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [6] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [7] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [8] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [9] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [10] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [11] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [18] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [19] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [20] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [21] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [22] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [25] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) TDFX(0): Softbooting the board (through the int10 interface). (==) TDFX(0): Write-combining range (0xa0000,0x20000) was already clear (==) TDFX(0): Write-combining range (0xc0000,0x40000) was already clear (II) TDFX(0): Primary V_BIOS segment is: 0xc000 (==) TDFX(0): Write-combining range (0x0,0x1000) was already clear (II) TDFX(0): Softbooting the board succeeded. (==) TDFX(0): Write-combining range (0x0,0x1000) was already clear (II) TDFX(0): TDFXFindChips: found 1 chip(s) (**) TDFX(0): Depth 24, (--) framebuffer bpp 32 (==) TDFX(0): RGB weight 888 (==) TDFX(0): Default visual is TrueColor (--) TDFX(0): Chipset: "3dfx Voodoo3" (--) TDFX(0): Linear framebuffer at 0xE2000000 (--) TDFX(0): MMIO registers at addr 0xDE000000 (--) TDFX(0): PIO registers at addr 0xD800 (II) TDFX(0): DRAMINIT1 read 0x40202031, programming 0x40202031 (not Banshee) (II) TDFX(0): TDFXInitChips: numchips = 1 (II) TDFX(0): TDFXInitChips: cfgbits = 0x00000000, initbits = 0x00000001 (II) TDFX(0): TDFXInitChips: mem0base = 0xde000000, mem1base = 0xe2000008 (II) TDFX(0): TDFXInitChips: mem0size = 0x02000000, mem1size = 0x02000000 (II) TDFX(0): TDFXInitChips: mem0bits = 0x00000005, mem1bits = 0x00000050 (II) TDFX(0): TDFXInitChips: cfgbits = 0x00000055 (II) TDFX(0): TDFXInitChips: MMIOAddr[0] = 0xde000000 (II) TDFX(0): TDFXInitChips: LinearAddr[0] = 0xe2000008 (--) TDFX(0): VideoRAM: 16384 kByte Mapping 32768 kByte (==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0) (II) TDFX(0): MultiSync E950: Using hsync range of 31.50-91.00 kHz (II) TDFX(0): MultiSync E950: Using vrefresh range of 55.00-160.00 Hz (II) TDFX(0): Clock range: 12.00 to 300.00 MHz (II) TDFX(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) TDFX(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) TDFX(0): Not using default mode "1600x1200" (hsync out of range) (II) TDFX(0): Not using default mode "800x600" (hsync out of range) (II) TDFX(0): Not using default mode "1600x1200" (hsync out of range) (II) TDFX(0): Not using default mode "800x600" (hsync out of range) (II) TDFX(0): Not using default mode "1792x1344" (hsync out of range) (II) TDFX(0): Not using default mode "896x672" (hsync out of range) (II) TDFX(0): Not using default mode "1856x1392" (hsync out of range) (II) TDFX(0): Not using default mode "928x696" (hsync out of range) (II) TDFX(0): Not using default mode "1920x1440" (hsync out of range) (II) TDFX(0): Not using default mode "960x720" (hsync out of range) (II) TDFX(0): Not using default mode "1400x1050" (unknown reason) (II) TDFX(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan) (II) TDFX(0): Not using default mode "960x720" (hsync out of range) (II) TDFX(0): Not using default mode "2048x1536" (hsync out of range) (II) TDFX(0): Not using default mode "1024x768" (hsync out of range) (II) TDFX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) TDFX(0): Not using default mode "1024x768" (hsync out of range) (II) TDFX(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan) (II) TDFX(0): Not using default mode "1024x768" (hsync out of range) (II) TDFX(0): Not using default mode "1920x1440" (width too large for virtual size) (II) TDFX(0): Not using default mode "1856x1392" (width too large for virtual size) (II) TDFX(0): Not using default mode "1792x1344" (width too large for virtual size) (II) TDFX(0): Not using default mode "1600x1200" (width too large for virtual size) (II) TDFX(0): Not using default mode "1600x1200" (width too large for virtual size) (II) TDFX(0): Not using default mode "1600x1200" (width too large for virtual size) (II) TDFX(0): Not using default mode "1400x1050" (width too large for virtual size) (--) TDFX(0): Virtual size is 1280x1024 (pitch 1280) (**) TDFX(0): *Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz (II) TDFX(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (**) TDFX(0): *Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) TDFX(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (**) TDFX(0): *Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (II) TDFX(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync (**) TDFX(0): *Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D) (II) TDFX(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482 505 doublescan +hsync +vsync (**) TDFX(0): Default mode "1280x1024": 135.0 MHz, 80.0 kHz, 75.0 Hz (II) TDFX(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) TDFX(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz (II) TDFX(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (**) TDFX(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz (II) TDFX(0): Modeline "1280x960" 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (**) TDFX(0): Default mode "1280x960": 108.0 MHz, 60.0 kHz, 60.0 Hz (II) TDFX(0): Modeline "1280x960" 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (**) TDFX(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (II) TDFX(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (**) TDFX(0): Default mode "1152x768": 65.0 MHz, 44.2 kHz, 54.8 Hz (II) TDFX(0): Modeline "1152x768" 65.00 1152 1178 1314 1472 768 771 777 806 +hsync +vsync (**) TDFX(0): Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz (II) TDFX(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (**) TDFX(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz (II) TDFX(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (**) TDFX(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (II) TDFX(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (**) TDFX(0): Default mode "960x720": 117.0 MHz, 90.0 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "960x720" 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (**) TDFX(0): Default mode "928x696": 109.2 MHz, 86.4 kHz, 60.1 Hz (D) (II) TDFX(0): Modeline "928x696" 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (**) TDFX(0): Default mode "896x672": 102.4 MHz, 83.7 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "896x672" 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (**) TDFX(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz (II) TDFX(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (**) TDFX(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (II) TDFX(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (**) TDFX(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz (II) TDFX(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (**) TDFX(0): Default mode "800x600": 94.5 MHz, 87.5 kHz, 70.0 Hz (D) (II) TDFX(0): Modeline "800x600" 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) TDFX(0): Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D) (II) TDFX(0): Modeline "800x600" 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) TDFX(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz (II) TDFX(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (**) TDFX(0): Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "800x600" 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (**) TDFX(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz (II) TDFX(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (**) TDFX(0): Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D) (II) TDFX(0): Modeline "700x525" 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (**) TDFX(0): Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "700x525" 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (**) TDFX(0): Default mode "640x512": 78.8 MHz, 91.1 kHz, 85.0 Hz (D) (II) TDFX(0): Modeline "640x512" 78.75 640 672 752 864 512 512 514 536 doublescan +hsync +vsync (**) TDFX(0): Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D) (II) TDFX(0): Modeline "640x512" 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (**) TDFX(0): Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "640x512" 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (**) TDFX(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (II) TDFX(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (**) TDFX(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz (II) TDFX(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (**) TDFX(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz (II) TDFX(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (**) TDFX(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (II) TDFX(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (**) TDFX(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "640x480" 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (**) TDFX(0): Default mode "720x400": 35.5 MHz, 37.9 kHz, 85.0 Hz (II) TDFX(0): Modeline "720x400" 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (**) TDFX(0): Default mode "640x400": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) TDFX(0): Modeline "640x400" 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (**) TDFX(0): Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D) (II) TDFX(0): Modeline "576x432" 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (**) TDFX(0): Default mode "640x350": 31.5 MHz, 37.9 kHz, 85.1 Hz (II) TDFX(0): Modeline "640x350" 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (**) TDFX(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) (II) TDFX(0): Modeline "576x384" 32.50 576 589 657 736 384 385 388 403 doublescan +hsync +vsync (**) TDFX(0): Default mode "512x384": 47.2 MHz, 68.7 kHz, 85.0 Hz (D) (II) TDFX(0): Modeline "512x384" 47.25 512 536 584 688 384 384 386 404 doublescan +hsync +vsync (**) TDFX(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) (II) TDFX(0): Modeline "512x384" 39.40 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (**) TDFX(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) (II) TDFX(0): Modeline "512x384" 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (**) TDFX(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) (II) TDFX(0): Modeline "512x384" 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (**) TDFX(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) (II) TDFX(0): Modeline "416x312" 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (**) TDFX(0): Default mode "400x300": 28.1 MHz, 53.7 kHz, 85.3 Hz (D) (II) TDFX(0): Modeline "400x300" 28.15 400 416 448 524 300 300 302 315 doublescan +hsync +vsync (**) TDFX(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) (II) TDFX(0): Modeline "400x300" 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (**) TDFX(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) (II) TDFX(0): Modeline "400x300" 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (**) TDFX(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) (II) TDFX(0): Modeline "400x300" 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (**) TDFX(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) (II) TDFX(0): Modeline "400x300" 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (**) TDFX(0): Default mode "320x240": 18.0 MHz, 43.3 kHz, 85.2 Hz (D) (II) TDFX(0): Modeline "320x240" 18.00 320 348 376 416 240 240 242 254 doublescan -hsync -vsync (**) TDFX(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) (II) TDFX(0): Modeline "320x240" 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (**) TDFX(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) (II) TDFX(0): Modeline "320x240" 15.75 320 332 352 416 240 244 245 260 doublescan -hsync -vsync (**) TDFX(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (II) TDFX(0): Modeline "320x240" 12.60 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (**) TDFX(0): Default mode "360x200": 17.8 MHz, 37.9 kHz, 85.0 Hz (D) (II) TDFX(0): Modeline "360x200" 17.75 360 378 414 468 200 200 202 223 doublescan -hsync +vsync (**) TDFX(0): Default mode "320x200": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) TDFX(0): Modeline "320x200" 15.75 320 336 368 416 200 200 202 222 doublescan -hsync +vsync (**) TDFX(0): Default mode "320x175": 15.8 MHz, 37.9 kHz, 85.3 Hz (D) (II) TDFX(0): Modeline "320x175" 15.75 320 336 368 416 175 191 192 222 doublescan +hsync -vsync (==) TDFX(0): DPI set to (75, 75) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.2 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (**) TDFX(0): ShowCache Disabled (**) TDFX(0): video key default 0x1e (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.1.0 ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/libint10.a (II) TDFX(0): initializing int10 (==) TDFX(0): Write-combining range (0xa0000,0x20000) was already clear (II) TDFX(0): Primary V_BIOS segment is: 0xc000 (==) TDFX(0): Write-combining range (0x0,0x1000) was already clear (II) TDFX(0): VESA BIOS detected (II) TDFX(0): VESA VBE Version 3.0 (II) TDFX(0): VESA VBE Total Mem: 16384 kB (II) TDFX(0): VESA VBE OEM: 3dfx Interactive, Inc. (II) TDFX(0): VESA VBE OEM Software Rev: 1.0 (II) TDFX(0): VESA VBE OEM Vendor: Elpin Systems, Inc. (II) TDFX(0): VESA VBE OEM Product: 3dfx Avenger (II) TDFX(0): VESA VBE OEM Product Rev: Version 1.00 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) TDFX(0): VESA VBE DDC supported (II) TDFX(0): VESA VBE DDC Level 2 (II) TDFX(0): VESA VBE DDC transfer in appr. 8 sec. (II) TDFX(0): VESA VBE DDC read successfully (==) TDFX(0): Write-combining range (0x0,0x1000) was already clear (II) TDFX(0): Manufacturer: NEC Model: 4bfa Serial#: 16843009 (II) TDFX(0): Year: 1999 Week: 20 (II) TDFX(0): EDID Version: 1.1 (II) TDFX(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) TDFX(0): Sync: Separate Composite (II) TDFX(0): Max H-Image Size [cm]: horiz.: 37 vert.: 27 (II) TDFX(0): Gamma: 2.20 (II) TDFX(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) TDFX(0): redX: 0.628 redY: 0.335 greenX: 0.290 greenY: 0.605 (II) TDFX(0): blueX: 0.150 blueY: 0.065 whiteX: 0.283 whiteY: 0.297 (II) TDFX(0): Supported VESA Video Modes: (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (interlaced) (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): [EMAIL PROTECTED] (II) TDFX(0): Manufacturer's mask: 0 (II) TDFX(0): Supported Future Video Modes: (II) TDFX(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833 (II) TDFX(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853 (II) TDFX(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881 (II) TDFX(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) TDFX(0): #4: hsize: 1280 vsize 960 refresh: 85 vid: 22913 (II) TDFX(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297 (II) TDFX(0): #6: hsize: 1600 vsize 1200 refresh: 75 vid: 20393 (II) TDFX(0): #7: hsize: 1920 vsize 1440 refresh: 60 vid: 16593 (II) TDFX(0): Supported additional Video Mode: (II) TDFX(0): clock: 234.0 MHz Image Size: 356 x 267 mm (II) TDFX(0): h_active: 1920 h_sync: 2048 h_sync_end 2256 h_blank_end 2600 h_border: 0 (II) TDFX(0): v_active: 1440 v_sync: 1441 v_sync_end 1444 v_blanking: 1500 v_border: 0 (II) TDFX(0): Ranges: V min: 55 V max: 160 Hz, H min: 31 H max: 96 kHz, PixClock max 240 MHz (II) TDFX(0): Monitor name: NEC E950 (II) TDFX(0): Serial No: 9554089AA (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B] [1] 0 0 0xde000000 - 0xdfffffff (0x2000000) MX[B] [2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0 0xdc800000 - 0xdcffffff (0x800000) MX[B]E [8] -1 0 0xdd000000 - 0xddffffff (0x1000000) MX[B]E [9] -1 0 0xe1000000 - 0xe17fffff (0x800000) MX[B]E [10] -1 0 0xe4000000 - 0xe3ffffff (0x0) MX[B]EO [11] -1 0 0xe1ff0000 - 0xe1ffffff (0x10000) MX[B](B) [12] -1 0 0xe2000000 - 0xe3ffffff (0x2000000) MX[B](B) [13] -1 0 0xde000000 - 0xdfffffff (0x2000000) MX[B](B) [14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [17] 0 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]E [21] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]E [22] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]E [23] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]E [24] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]E [25] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]E [26] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B) [27] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprD) [28] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprD) (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (II) TDFX(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Dashed Lines Offscreen Pixmaps Driver provided NonTEGlyphRenderer replacement Setting up tile and stipple cache: 32 128x128 slots 9 256x256 slots (==) TDFX(0): Backing store disabled (==) TDFX(0): Silken mouse enabled (--) TDFX(0): Direct rendering disabled (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (**) Option "Protocol" "Auto" (**) Mouse1: Protocol: "Auto" (**) Option "CorePointer" (**) Mouse1: Core Pointer (**) Option "Device" "/dev/sysmouse" (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50 (==) Mouse1: Buttons: 3 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (II) Mouse1: SetupAuto: hw.iftype is 4, hw.model is 0 (II) Mouse1: SetupAuto: protocol is SysMouse (II) 3rd Button detected: disabling emulate3Button (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (--) TDFX(0): Direct rendering disabled (==) RandR enabled (**) Option "BaudRate" "1200" (**) Option "StopBits" "2" (**) Option "DataBits" "8" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (II) 3rd Button detected: disabling emulate3Button (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (--) TDFX(0): Direct rendering disabled (==) RandR enabled (II) 3rd Button detected: disabling emulate3Button (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (--) TDFX(0): Direct rendering disabled (==) RandR enabled (II) 3rd Button detected: disabling emulate3Button (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (--) TDFX(0): Direct rendering disabled (==) RandR enabled (II) 3rd Button detected: disabling emulate3Button (==) TDFX(0): Write-combining range (0xde000000,0x2000000) was already clear (==) TDFX(0): Write-combining range (0xe2000000,0x2000000) (II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0xd500 (==) TDFX(0): Write-combining range (0xa0000,0x10000) was already clear (II) TDFX(0): Changing back offset from 0x005ff000 to 0x005fe000 (II) TDFX(0): Not enough video memory available for textures and depth buffer and/or back buffer. Disabling DRI. To use DRI try lower resolution modes and/or a smaller virtual screen size (II) TDFX(0): Cursor Offset: [0x00000000,0x00001000) (II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000) (II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00692800) (II) TDFX(0): (NOT USED) Texture Offset: [0x00692800, 0x006927FF) (II) TDFX(0): (NOT USED) BackOffset: [0x01000000, 0x01500000) (II) TDFX(0): (NOT USED) DepthOffset: [0xFFFFFFFF, 0x004FFFFF) (II) TDFX(0): Minimum 270, Maximum 1023 lines of offscreen memory available (--) TDFX(0): Direct rendering disabled (==) RandR enabled (II) 3rd Button detected: disabling emulate3Button
# File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "speedo" # Load "freetype" # Load "xtt" # This loads the GLX module # Load "glx" # This loads the DRI module # Load "dri" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" # FontPath "/usr/X11R6/lib/X11/fonts/TrueType/" # FontPath "/usr/X11R6/lib/X11/fonts/freefont/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence # (where n is 1 through 12). This allows clients to receive these key # events. # Option "DontVTSwitch" # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "omnikey101" Option "XkbLayout" "us" Option "XkbOptions" "ctrl:swapcaps" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "Auto" Option "Device" "/dev/sysmouse" # Mouse-speed setting for PS/2 mouse. # Option "Resolution" "256" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "MultiSync E950" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5-91 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 55-160 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" Identifier "Voodoo3 (generic)" Driver "tdfx" #VideoRam 16384 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "Voodoo3 (generic)" Monitor "MultiSync E950" DefaultDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection # Section "DRI" # Mode 0666 # EndSection