[XFree86] Try not to use modlines.
Just do: # UseModes Modes[0] EndSection #Section Modes # Identifier Modes[0] # Modeline 1400x1050 118.42 1400 1488 1640 1880 1050 1051 1054 1086 # Modeline 800x600 36.88 800 832 912 1024 600 601 604 621 # Modeline 1400x1050 122.61 1400 1488 1640 1880 1050 1051 1054 1087 #EndSection then save XF86Config. -- Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem with Nvidia driver on Mandrake 9.2
Am Sonntag, 22. Februar 2004 19:48 schrieb Wesley Hobbie: nvidia is already listed in the /etc/modules file. What did modprobe nvidia print out. The XFree driver couldn't find the kernelmodule so their had to be an error message. -- Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem with Nvidia driver on Mandrake 9.2
You did not load the kernelmodule. As root try modprobe nvidia. If it works tell the System to load the module on startup by putting nvidia in /etc/modules. Then reboot. -- Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] xfree86 server crash
To run any chipset needing the i810 driver please update to XFree 4.3.X or higher AND Linux 2.4.20 (for i830M or later Linux 2.6.X is needed). -- Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Debian just got updated to 4.3 and now the Problem is solved (nT)
___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XFree86.log flooded with Not loading .note.GNU-stack
... For more information see Kernel Notes at the bottom of http://fedora.redhat.com/docs/release-notes/. This explains the message. /proc/sys/kernel/exec-shield does not exist on my system so my kernel does not support exec-shield. I don't think I need it thus I won't waste time tryiing to enable this feature. Leaves the question: Can I tell X not to log this message? (I run a Debiansystem and have bad experiences not using the maintainers-packages. That's why I can't use the original binaries from XFree86.org.) LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Xfree doesent start
... in my name and password. So I tried (after login in) startx but there are some reports comming but I dont know what they mean! If you can help me, please write to [EMAIL PROTECTED] . Kannst Du die Datei /var/log/XFree86.log anhängen ? Da stehen die Fehlermeldungen drin. P.s: Please excuse my bad Orthography Im going to 9th class and Im from Germany... O.K., thats why I answered in German. -- Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XFree86.log flooded with Not loading .note.GNU-stack
Hi, this message appears over 500 times in my XFree86.log. I googled and found I'm not the only one with this messageflood. But I found no responses telling: What does this message mean? How can I solve the problem? How can I tell the X to do a last message repeated xyz-times instead of making my log unreadable? LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] linux and windows.
This mailinglist is for XFree86. This is the program managing windows (with a small w at the beginning) on Unix-based systems like Linux. You should probably go to : http://www.linuxforum.com/forums/ or fast information to: http://www.linux.org/info/index.html Hope this helps. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Matrox G450 Video Card
Matrox has a driver on it's homepage. It should work with every XFree86 4.x. Since Mandrake 7.0 is using XFree 3.3.6 you should consider downloading a newer Mandrake. ...Or use the 3.3.6 SVGA driver. It has all options for 2D but no 3D. Hope this helps. Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] nvidia and ut2003 - wrong refresh rates
Am Mittwoch, 11. Februar 2004 18:53 schrieb LeVA: Hi! I'm trying to run ut2003 under linux with an nvidia driver, but everytime I start the game it switches to 800x600 @ 56 Hz, altough my monitor does support 1024x768 @ 85 Hz, and 800x600 @ 100 Hz (which I can not set up under X, because it alway switches to [EMAIL PROTECTED] Hz, ... I had the same Problem with my NVidia until I entered Modlines for the Resolution/Frequency-Settings I wanted. I don't know why they don't ship these lines with XFree any more but here are the lines that worked with my card/monitor combination: # 100 Hz Modelines Modeline 640x480 45.8 640 672 768 864 480 488 494 530 -HSync -VSync Modeline 800x600 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync Modeline 1024x768 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync Modeline 1152x864 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync Modeline 1280x1024 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync You'll probably have to tune them with xvidtune. Hope this helps LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Accepting external USB-mouse without restart
Am Mittwoch, 11. Februar 2004 16:12 schrieb L. Jensen: On Wednesday 11 February 2004 04:35 am, NUKE THEM wrote: I'd like to be able to plug in my external USB-mouse and use it without restarting X. Is this possible? Yes, I have it working on my system. Besides the two InputDevice sections you posted, you may need to change your ServerLayout section to something like what's below. The other key ingredient is to make sure that all the modules needed for the usb mouse are loaded before X starts. Otherwise, you may see an error in the log when the server tries to open the device. The list of modules I use is below. Best L. Jensen Section ServerLayout Identifier Layout[0] Screen Screen[0] InputDevice GenericKeyboard CoreKeyboard InputDevice SynapticsTouchPad CorePointer InputDevice USBWheelMouse SendCoreEvents EndSection MODULES_LOADED_ON_BOOT= usb-uhci input evdev mousedev hid Didn't help with Linux 2.4 but I just upgraded to 2.6 and now it works. Weird, as much as I know the USB-System didn't change. Anyway, thanks a lot for your answer. LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Accepting external USB-mouse without restart
Hi, I'd like to be able to plug in my external USB-mouse and use it without restarting X. Is this possible? I have a Labtop with a PS2-Touchpad (Synaptics) running Linux 2.6.0 (selfcompiled) on a Debian unstable (XFree86 4.2). Here is the mouse section of my XF86Config-4 : Section InputDevice Identifier Configured Mouse Driver mouse Option SendCoreEvents true Option Device /dev/input/mice Option Protocol Auto Option Emulate3Buttons false Option ZAxisMapping 4 5 Option AllowMouseOpenFail true EndSection Section InputDevice Identifier Touchpad Driver mouse Option CorePointer Option Device /dev/psaux Option Protocol ImPS/2 Option Emulate3Buttons true Option ZAxisMapping 4 5 EndSection LLAP Patrick ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
