[XFree86] [XFree86]With Geforce4 420 Go , I can't start startx
Hi, everyone I have Geforce4 420 Go VGA chip in My board. Now, I knew linux-2.6.xx support Geforce4 420 go at rivafb. so I think I am lucky. and I compile 2.6.xx kernel. and insmod rivafb.ko and configuration /etc/X11/XF86config and then startx. but can't startx because of some problems. What'up? here are XF86config and log file. /etc/X11/XF86config ---snip Section Device Identifier Videocard0 Driver fbdev EndSection Section Screen Identifier Screen0 Device Videocard0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes default EndSubSection EndSection -snip-- /var/log/XFree86.0.log -snip-- (II) FBDEV: driver for framebuffer: fbdev, afb (II) Primary Device is: PCI 01:00:0 (II) Loading sub module fbdevhw (II) LoadModule: fbdevhw (II) Reloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) FBDEV(0): using default device (II) Running in FRAMEBUFFER Mode (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32 (==) FBDEV(0): RGB weight 888 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): Hardware: nVidiaGeForce4-4 (vidmem: 32768k) (II) FBDEV(0): Checking Modes against framebuffer device... (II) FBDEV(0): mode default not found (II) FBDEV(0): Checking Modes against monitor... (--) FBDEV(0): Virtual size is 640x480 (pitch 640) (**) FBDEV(0): Built-in mode current: 25.2 MHz, 31.5 kHz, 59.9 Hz (II) FBDEV(0): Modeline current 25.18 640 664 760 800 480 491 493 525 -hsync -vsync -csync (**) FBDEV(0): Display dimensions: (340, 270) mm (**) FBDEV(0): DPI set to (47, 45) (EE) FBDEV(0): Fbdev type (137547164) not supported yet.(II) UnloadModule: fbdev (II) UnloadModule: fbdevhw (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] [XFree86]With Geforce4 420 Go , I can't start startx
Maybe the framebuffer device doesn't support it? Why don't you use the nv driver instead? It supported it in 4.3 and onward. Mark. On Thu, 18 Dec 2003, [ks_c_5601-1987] ÃÖ¿µÀÏ wrote: Hi, everyone I have Geforce4 420 Go VGA chip in My board. Now, I knew linux-2.6.xx support Geforce4 420 go at rivafb. so I think I am lucky. and I compile 2.6.xx kernel. and insmod rivafb.ko and configuration /etc/X11/XF86config and then startx. but can't startx because of some problems. What'up? here are XF86config and log file. /etc/X11/XF86config ---snip Section Device Identifier Videocard0 Driver fbdev EndSection Section Screen Identifier Screen0 Device Videocard0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes default EndSubSection EndSection -snip-- /var/log/XFree86.0.log -snip-- (II) FBDEV: driver for framebuffer: fbdev, afb (II) Primary Device is: PCI 01:00:0 (II) Loading sub module fbdevhw (II) LoadModule: fbdevhw (II) Reloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) FBDEV(0): using default device (II) Running in FRAMEBUFFER Mode (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32 (==) FBDEV(0): RGB weight 888 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): Hardware: nVidiaGeForce4-4 (vidmem: 32768k) (II) FBDEV(0): Checking Modes against framebuffer device... (II) FBDEV(0): mode default not found (II) FBDEV(0): Checking Modes against monitor... (--) FBDEV(0): Virtual size is 640x480 (pitch 640) (**) FBDEV(0): Built-in mode current: 25.2 MHz, 31.5 kHz, 59.9 Hz (II) FBDEV(0): Modeline current 25.18 640 664 760 800 480 491 493 525 -hsync -vsync -csync (**) FBDEV(0): Display dimensions: (340, 270) mm (**) FBDEV(0): DPI set to (47, 45) (EE) FBDEV(0): Fbdev type (137547164) not supported yet.(II) UnloadModule: fbdev (II) UnloadModule: fbdevhw (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] [XFree86]With Geforce4 420 Go , I can't start startx
My system is embedded system. So I should use framebuffer. So I succeed to startx at linux-2.4.22 kernel version. but the kernel don't support Geforce4 420 go. Now, linux-2.6.0 support the chip. So I tried it - Original Message - From: Mark Vojkovich [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, December 18, 2003 10:05 AM Subject: Re: [XFree86] [XFree86]With Geforce4 420 Go , I can't start startx Maybe the framebuffer device doesn't support it? Why don't you use the nv driver instead? It supported it in 4.3 and onward. Mark. On Thu, 18 Dec 2003, [ks_c_5601-1987] wrote: Hi, everyone I have Geforce4 420 Go VGA chip in My board. Now, I knew linux-2.6.xx support Geforce4 420 go at rivafb. so I think I am lucky. and I compile 2.6.xx kernel. and insmod rivafb.ko and configuration /etc/X11/XF86config and then startx. but can't startx because of some problems. What'up? here are XF86config and log file. /etc/X11/XF86config ---snip Section Device Identifier Videocard0 Driver fbdev EndSection Section Screen Identifier Screen0 Device Videocard0 MonitorMonitor0 DefaultDepth 24 SubSection Display Depth 24 Modes default EndSubSection EndSection -snip-- /var/log/XFree86.0.log -snip-- (II) FBDEV: driver for framebuffer: fbdev, afb (II) Primary Device is: PCI 01:00:0 (II) Loading sub module fbdevhw (II) LoadModule: fbdevhw (II) Reloading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) FBDEV(0): using default device (II) Running in FRAMEBUFFER Mode (**) FBDEV(0): Depth 24, (--) framebuffer bpp 32 (==) FBDEV(0): RGB weight 888 (==) FBDEV(0): Default visual is TrueColor (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) (II) FBDEV(0): Hardware: nVidiaGeForce4-4 (vidmem: 32768k) (II) FBDEV(0): Checking Modes against framebuffer device... (II) FBDEV(0): mode default not found (II) FBDEV(0): Checking Modes against monitor... (--) FBDEV(0): Virtual size is 640x480 (pitch 640) (**) FBDEV(0): Built-in mode current: 25.2 MHz, 31.5 kHz, 59.9 Hz (II) FBDEV(0): Modeline current 25.18 640 664 760 800 480 491 493 525 -hsync -vsync -csync (**) FBDEV(0): Display dimensions: (340, 270) mm (**) FBDEV(0): DPI set to (47, 45) (EE) FBDEV(0): Fbdev type (137547164) not supported yet.(II) UnloadModule: fbdev (II) UnloadModule: fbdevhw (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
