[XFree86] problem report
Dir Sir/Madam, i installed XFree86 yesterday, i had some problems. could you read the following information about the laptop and report? VERSION: 4.5.0 VIDEO DRIVER: Neomagic nm2200 OPERATING SYSTEM: Red Hat Linux release 9 (shrike) kernel 2.4.20-8 on an i686 VIDEO CARD: MODEL: Compaq presario 1925 (laptop integrate video card) GRAPHICS CHIPSET: MagicMedia 256AV VIDEO MEMORY: 2MB DRAM BUS TYPE: PCI REPORT: i can not enter the graphic surface only the text, and the it shows Error: open /dev/fb0 : no such device could not init font path element /usr/X11R6/lib/X11/fonts/speedo, removing from list! could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list! could you tell me, what is the problem? thank you very much! youkun gao ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem report
On Mon, 18 Apr 2005, Youkun Gao wrote: Dir Sir/Madam, i installed XFree86 yesterday, i had some problems. could you read the following information about the laptop and report? REPORT: i can not enter the graphic surface only the text, and the it shows Error: open /dev/fb0 : no such device could not init font path element /usr/X11R6/lib/X11/fonts/speedo, removing from list! could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list! could you tell me, what is the problem? You likely need to get rid of any mention of fbdev from your XF86Config file. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem report
sorry, i am a new linux user, i did not get your point exactly. you mean i should delete all mentions about fbdev in file XF86Config, right? but i used Xinstall.sh to install it, and XFree86 -autoconfig to configured it, could you please explain me a little more, how can i configure it manually or delete the mentions about fbdev? thanks a lot! gao Marc Aurele La France [EMAIL PROTECTED] schrieb: On Mon, 18 Apr 2005, Youkun Gao wrote: Dir Sir/Madam, i installed XFree86 yesterday, i had some problems. could you read the following information about the laptop and report? REPORT: i can not enter the graphic surface only the text, and the it shows Error: open /dev/fb0 : no such device could not init font path element /usr/X11R6/lib/X11/fonts/speedo, removing from list! could not init font path element /usr/X11R6/lib/X11/fonts/CID, removing from list! could you tell me, what is the problem? You likely need to get rid of any mention of fbdev from your XF86Config file. Marc. +--+- --+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply | | CANADA | | +--+- --+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] problem report
On Mon, 18 Apr 2005, Youkun Gao wrote: sorry, i am a new linux user, i did not get your point exactly. you mean i should delete all mentions about fbdev in file XF86Config, right? but i used Xinstall.sh to install it, and XFree86 -autoconfig to configured it, could you please explain me a little more, how can i configure it manually or delete the mentions about fbdev? That's documented in the release notes. Marc. +--+---+ | Marc Aurele La France | work: 1-780-492-9310 | | Computing and Network Services | fax:1-780-492-1729 | | 352 General Services Building | email: [EMAIL PROTECTED] | | University of Alberta +---+ | Edmonton, Alberta | | | T6G 2H1 | Standard disclaimers apply| | CANADA | | +--+---+ XFree86 developer and VP. ATI driver and X server internals. ___ XFree86 mailing list XFree86@XFree86.Org http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] problem report
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Thu Jan 22 11:27:16 2004 (==) Using config file: /etc/X11/XF86Config (==) ServerLayout Default Layout (**) |--Screen Screen0 (0) (**) | |--Monitor Monitor0 (**) | |--Device Videocard0 (**) |--Input Device Mouse0 (**) |--Input Device Keyboard0 (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout us_intl (**) XKB: layout: us_intl (==) Keyboard: CustomKeycode disabled (**) |--Input Device DevInputMice (**) FontPath set to unix/:7100 (**) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (WW) Warning, couldn't open module bitmap (II) UnloadModule: bitmap (EE) Failed to load module bitmap (module does not exist, 0) (II) LoadModule: pcidata (WW) Warning, couldn't open module pcidata (II) UnloadModule: pcidata (EE) Failed to load module pcidata (module does not exist, 0) Fatal server error: Unable to load required base modules, Exiting... When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED]
Re: [XFree86] Problem report - Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP
Thanks to Craig Ringer and Jesse Hutton - while it does not solve my problem yet, I made a little progress. No Jesse Hutton, Option FlatPanel 1 does not work. I810(0): Option FlatPanel is not used -- Back to problem. The Flat Panel 1504FP is 1024x768 with Depth 8. Hsync 30-60, Vsync 56-75. In Boot session I see the following message: quote BIOS data check suceesfull You passed an undefined mode number Please press RETURN to see valid video modes, or SPACE or await 30 sec (either make your choice between various sets 80rows x N lines; or wait 30 sec) /quote -- I have been playing with /etc/X11/XF86Config-4 Section Monitor and Section Screen for DefaultColorDepth (mine is 8). I get two situations: 1. Half-success: Graphic display, but with enooormous font size, actualy useless (II) I810(0): monitor1: Using hsync range of 31.00-60.00 kHz (II) I810(0): monitor1: Using vrefresh range of 56.00-75.00 Hz (II) I810(0): Not using mode 1024x768 (no mode of this name) (II) I810(0): Not using mode 800x600 (no mode of this name) (II) I810(0): Increasing the scanline pitch to allow tiling mode (640 - 1024). (--) I810(0): Virtual size is 640x480 (pitch 1024) (**) I810(0): *Built-in mode 640x480 (II) I810(0): Attempting to use 73Hz refresh for mode 640x480 (41) (--) I810(0): Display dimensions: (300, 220) mm (--) I810(0): DPI set to (54, 55) 2. Disappointement: The blue screen, where a small clock logo is working quite a long while, screen changes into various coulours, at the end it became blue, with a small white space, written in nice font (precisely what I would like to get !) and a note Impossible de lancer le programme Impossible de creer le module d'entree/sortie: Too many open files. I definitely hate to have my OS in anything else than ASCII, they probably say Impossible to launch(?) the program. Impossible to create IO module: Too many open files Once this is closed (click click), I have full blue sceen, my mouse is able to open half-broken menus of KDE environment. But nothing can be done with it, except reading it. My Conclusion: I think I miss correct information for ModeLine for Section Monitor Section Monitor Identifier monitor1 VendorName Plug'n Play #ModelName Dell 1504FP Flat Panel 1024x768 HorizSync 31-60 VertRefresh 56-75 something similar to Sony Vaio: # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine 1024x48065.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync Any help would be much appreciated. What I have in doc/log is: # DELL 1504FP, 1024x768 @ 60 Hz # Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 80 MHz # Supported additional Video Mode: # clock: 65.0 MHz Image Size: 304 x 228 mm # h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 # v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 I do not know enough about it, it seems that guessing below is NOK. ModeLine 1024x76865.00 1024 1048 1184 1344 768 771 777 806 I also found quite interesting document explaining the chaos we have in Flat Panels: http://www.dell.com/us/en/gen/topics/vectors_2003-cvt.htm Dell Technology White Paper Proposed Display Timing Standard Addresses Demands of Digital Flat-Panel Displays Download PDF (275KB) January 2003 Shuguang Wu and Mohammed Farhat, Graphics Engineers Joe Goodart, Displays Engineer Elisabeth Porteneuve ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem report - Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP
I forgot to add that when it seems that blue graphic sceen is coming, but it lasts forwever, the ps -aux gives tens of lines like this one porteneu 2927 0.0 3.4 21100 8788 ?S18:24 0:00 kdeinit: kio_file file /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktopgHqSOb.slave-socket porteneu 2928 0.0 3.4 21096 8784 ?S18:24 0:00 kdeinit: kio_file file /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktop3eEnYb.slave-socket porteneu 2929 0.0 3.3 20620 8556 ?S18:24 0:00 kdeinit: kio_devices devices /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktopKR3Bub.slave-socket porteneu 2935 0.0 3.4 21100 8788 ?S18:24 0:00 kdeinit: kio_file file /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktopaPeg3b.slave-socket porteneu 2936 0.0 3.4 21096 8784 ?S18:24 0:00 kdeinit: kio_file file /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktop15QWdb.slave-socket porteneu 2937 0.0 3.3 20620 8556 ?S18:24 0:00 kdeinit: kio_devices devices /tmp/ksocket-porteneu/klauncherCc9jac.slave-socket /tmp/ksocket-porteneu/kdesktopoA2PPb.slave-socket Elisabeth ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Problem report - Mandrake 9.1 on Dell Optiplex GX270with Flat Screen 1504FP
Some drivers have a problem with detecting a LCD monitor, which looks to be the case from the log. You might try adding this line in the Device section for your video card config of /etc/X11/XFree86-4: Option FlatPanel 1 It's supposed to word for NVIDIA chips, anyway... Jesse On Wed, 6 Aug 2003, Craig Ringer wrote: Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP The install went well, I even have Mandrake graphic screen with choice of linux, dos, etc, but then when corresponding boot starts it ends with black screen, and problem. OK, sounds like XFree86 is trying to start, but you haven't said any more. It just stops at a featureless black screen, it doesn't occasionally flash or anything? I'll try to go over the log, but be aware that I don't use an LCD much myself and don't know much about them, so there might be stuff I'm missing here. Dell techies say they support Windows only. Yeah. Yay. That's why OEM linux installs would be handy, for folks who want tech support. The CDROM provided with Flat Screen gives all characteristics (in French), and it also says that monitor have capability of Plug and Play. On resolution it says: La plage de fréquence horizontale 31 kHz à 60 kHz (automatique) La plage de fréquence verticale 60 Hz à 75 Hz (automatique) Résolution présélectionnée optimale 1024 x 768, 60 Hz Résolution présélectionnée maximale 1024 x 768, 75 Hz It looks like XFree86 is finding that info with DDC - oh, and you're running the latest XFree86, good. XFree86 Version 4.3.0 Release Date: 27 February 2003 (II) I810(0): Display Info: CRT: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV: attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP (digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: LFP (local flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: TV2 (second TV): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Display Info: DFP2 (second digital flat panel): attached: FALSE, present: FALSE, size: (0,0) (II) I810(0): Currently active displays on Pipe A: (II) I810(0): CRT It might not be a problem, but it seems to think you have a normal monitor attached. (II) I810(0): Manufacturer: DEL Model: 300c Serial#: 1145526093 (II) I810(0): Year: 2003 Week: 27 (II) I810(0): EDID Version: 1.3 (II) I810(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V (II) I810(0): Sync: Separate (II) I810(0): Max H-Image Size [cm]: horiz.: 30 vert.: 22 (II) I810(0): Gamma: 2.20 (II) I810(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) I810(0): Default color space is primary color space (II) I810(0): First detailed timing is preferred mode (II) I810(0): redX: 0.631 redY: 0.358 greenX: 0.300 greenY: 0.580 (II) I810(0): blueX: 0.143 blueY: 0.095 whiteX: 0.310 whiteY: 0.330 (II) I810(0): Supported VESA Video Modes: (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): [EMAIL PROTECTED] (II) I810(0): Manufacturer's mask: 0 (II) I810(0): Supported additional Video Mode: (II) I810(0): clock: 65.0 MHz Image Size: 304 x 228 mm (II) I810(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 h_blank_end 1344 h_border: 0 (II) I810(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 806 v_border: 0 (II) I810(0): Serial No: J0923371DGWM (II) I810(0): Monitor name: DELL 1504FP (II) I810(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 60 kHz, PixClock max 80 MHz (II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs. (II) I810(0): Will use BIOS call 0x5f64 to enable displays. (--) I810(0): Maximum space available for video modes: 832 kByte Looks alright there... (EE) I810(0): No Video BIOS modes for chosen depth. but after it prints the modes it reports this error. Looks like you might be trying to run it in a higher display depth than it can run in - try reconfiguring for [EMAIL PROTECTED] and work up from there. (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Yeah, because it can't find a suitable resolution to run the display at. At least, that's what it looks like. You should be able to find info on reconfiguring X under your distro docs. Alternately, boot into single user mode (this is a boot option in most distros) and reconfigure X from there. I don't know what setup tool mandrake uses - drakx comes to mind, but perhaps Xconfigurator is right. Perhaps someone who uses mandrake can post with the correct one? Craig Ringer ___ XFree86 mailing list [EMAIL PROTECTED]
[XFree86] Problem report - Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP
Greetings, Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP The install went well, I even have Mandrake graphic screen with choice of linux, dos, etc, but then when corresponding boot starts it ends with black screen, and problem. Dell techies say they support Windows only. The CDROM provided with Flat Screen gives all characteristics (in French), and it also says that monitor have capability of Plug and Play. On resolution it says: La plage de fréquence horizontale 31 kHz à 60 kHz (automatique) La plage de fréquence verticale 60 Hz à 75 Hz (automatique) Résolution présélectionnée optimale 1024 x 768, 60 Hz Résolution présélectionnée maximale 1024 x 768, 75 Hz The XFree log is attached /var/log/XFree86.0.log What does it meen no screens found, see at the end below. Thanks you ! Elisabeth Porteneuve -- XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF] Build Date: 12 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Aug 5 17:02:27 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (WW) Option XkbCompat requires an string value (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout fr (**) XKB: layout: fr (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 1028,0151 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2572 card 1028,0151 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24d2 card 1028,0151 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 1028,0151 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 1028,0151 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 1028,0151 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 1028,0151 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 1028,0151 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:0c:0: chip 8086,100e card 1028,0151 rev 02 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xd000 - 0xdfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfea0 - 0xfeaf (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 865G Chipset Graphics
[XFree86] Problem report - Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP
Greetings, Mandrake 9.1 on Dell Optiplex GX270 with Flat Screen 1504FP The install went well, I even have Mandrake graphic screen with choice of linux, dos, etc, but then when corresponding boot starts it ends with black screen, and problem. Dell techies say they support Windows only. The CDROM provided with Flat Screen gives all characteristics (in French), and it also says that monitor have capability of Plug and Play. On resolution it says: La plage de fréquence horizontale 31 kHz à 60 kHz (automatique) La plage de fréquence verticale 60 Hz à 75 Hz (automatique) Résolution présélectionnée optimale 1024 x 768, 60 Hz Résolution présélectionnée maximale 1024 x 768, 75 Hz The XFree log is attached /var/log/XFree86.0.log What does it meen no screens found, see at the end below. Thanks you ! Elisabeth Porteneuve -- XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.21-0.13mdksmp i686 [ELF] Build Date: 12 March 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Tue Aug 5 17:02:27 2003 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout layout1 (**) |--Screen screen1 (0) (**) | |--Monitor monitor1 (**) | |--Device device1 (**) |--Input Device Keyboard1 (WW) Option XkbCompat requires an string value (**) Option XkbModel pc105 (**) XKB: model: pc105 (**) Option XkbLayout fr (**) XKB: layout: fr (WW) Option XkbOptions requires an string value (==) Keyboard: CustomKeycode disabled (**) |--Input Device Mouse1 (**) FontPath set to unix/:-1 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (**) Option AllowMouseOpenFail Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2570 card 1028,0151 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2572 card 1028,0151 rev 02 class 03,00,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,24d2 card 1028,0151 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24d4 card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24d7 card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,24de card 1028,0151 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24dd card 1028,0151 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev c2 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24d0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24db card 1028,0151 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:2: chip 8086,24d1 card 1028,0151 rev 02 class 01,01,8f hdr 00 (II) PCI: 00:1f:3: chip 8086,24d3 card 1028,0151 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24d5 card 1028,0151 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:0c:0: chip 8086,100e card 1028,0151 rev 02 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xd000 - 0xdfff (0x1000) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xfea0 - 0xfeaf (0x10) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(0:2:0) Intel Corp. 865G Chipset Graphics
[XFree86] Problem report
Dear Sirs: I bought Red Hat Linux release 9 (Shrike) to upgrade the previous version 7.1 on my workstation, but I could not succeed in installing the X server. Please find enclosed the log file. I appreciate your help. Sincerely, Juan Padilla Dr. Juan Padilla Noriega Departamento de Química, R-116 Universidad Autónoma Metropolitana, unidad Iztapalapa Av. San Rafael Atlixco No. 186 Col. Vicentina México, D.F. 09340 Teléfono: +(55)5804-4678 Fax: +(55)5804-4666 Email: [EMAIL PROTECTED] XFree86.0.log Description: Binary data
[XFree86] problem report
(++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Wed Jul 9 05:41:48 2003 List of video drivers: atimisc r128 radeon mga glint nv tga s3 s3virge sis rendition neomagic i740 tdfx savage cirrus vmware tseng trident chips apm fbdev i128 ati i810 ark cyrix siliconmotion vesa vga v4l Fatal server error: XFree86 has found a valid card configuration. Unfortunately the appropriate data has not been added to xf86PciInfo.h. Please forward 'scanpci -v' output to XFree86 support team. When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] --- please help me ,i have a s3 Graphics ProSavageDRR bye __ Do you Yahoo!? SBC Yahoo! DSL - Now only $29.95 per month! http://sbc.yahoo.com ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
